ge mi fu used for sale

SINGLE SHAFT SHREDDER, V Rotor width 1.500 mm. Rotor diameter 500 mm 16.69″ Motor power 90 kW n.82 knives 60 x 60, adjustable counter-knife, off-set rotor bearings (low maintenance), V-Rotor with knife pockets, Welded knife holders with screwed knives and covered bold heads, Offset rotor bearings ( low-maintenance / closed ), Fast hydraulic backwards incl. different settings by PLC control and anti shock valve, Shredding room unpainted, Movable screen basket (electro-hydraulically), Screen thickness 10mm, Hydrodynamic starting clutch (energy saving system for machine start), Electromechanical drive with heavy duty gearbox, Control cabinet incl. 5m cable, Electrical control system Siemens S7 PLC control, Reverse counter and transmission limit switch (safety package), Star delta starter, Universal joints for piston with ram impulse and load-related ram function, Machine frame on anti - v ...

CONVEYOR BELT, Sturdy steel construction,, belt width 450 mm,, total length 8 500 mm,, inclination change 45°,, PVC belt L450mm, with applied trapezoidal guides,, corrugated edges, H50 mm and flights H50 mm L250mm,, idler roller diam.219,, outlet 500x150mm,, side rails,, 0.75 kw gear motor, rust-proof+enamel paint

SINGLE SHAFT SHREDDER, 1.000 mm wide rotor, 370 mm diameter, adjustable counter-knife, off-set rotor bearings (low maintenance), V-Rotor with knife pockets, Welded knife holders with screwed knives and covered bold heads, Offset rotor bearings ( low-maintenance / closed ), Fast hydraulic backwards incl. different settings by PLC control and anti shock valve, Shredding room unpainted, Movable screen basket (electro-hydraulically), Screen thickness 10mm, Hydrodynamic starting clutch (energy saving system for machine start), Electromechanical drive with heavy duty gearbox, Control cabinet incl. 5m cable, Electrical control system Siemens S7 PLC control, Reverse counter and transmission limit switch (safety package), Star delta starter, Universal joints for piston with ram impulse and load-related ram function, Machine frame on anti - vibration foundation, Machine prepared for discharge by c ...

TWIN-SHAFT HYDRAULIC SHREDDER, Customised hopper, construction in robust high thickness carbon steel, shredding surface 1.500 x 1.100 mm, 2 counter-rotating steel shafts with differentiated speed, Blades 50-75 mm, 4 teeth or bespoke, Very easy blade maintenance, welded profile connection frame, No. 2 gearboxes, Electric motors 2x37 kW (102Hp) - 400 V/50 Hz, bearings strategically positioned so as not to be affected by the processed material, the bearings are connected to a centralised lubrication point that can be connected (as an option) either to an automatic lubrication system or to a manual greasing point where the operator can intervene regularly., hydraulic control unit,, electrical control panel with PLC and machine wiring, automatic overload reversal with programmable number of reverse cycles, width: 1.500 mm, Power: 75 kw

TWIN-SHAFT HYDRAULIC SHREDDER, Customised hopper, construction in robust high thickness carbon steel, shredding surface 1.500 x 1.100 mm, 2 counter-rotating steel shafts with differentiated speed, Blades 50-75 mm, 4 teeth or bespoke, Very easy blade maintenance, welded profile connection frame, No. 2 gearboxes, Electric motors 2x37 kW (102Hp) - 400 V/50 Hz, bearings strategically positioned so as not to be affected by the processed material, the bearings are connected to a centralised lubrication point that can be connected (as an option) either to an automatic lubrication system or to a manual greasing point where the operator can intervene regularly., hydraulic control unit,, electrical control panel with PLC and machine wiring, automatic overload reversal with programmable number of reverse cycles, width: 1.500 mm. (59.06), Power: 100 Hp 75 kw

SINGLE SHAFT SHREDDER 150 kw (or 180 kw), sturdy structure in electro-welded steel, cutting chamber dimensions mm. 2000x1000, electro-welded sheet metal hopper for top loading, installed power on the rotor 75 + 75 kw optional 90 + 90 kw, hydraulic unit power 11 kw (15 HP), transmission by belts, 1 rotor, rotor diameter 480 mm., rotor length 2000 mm., 122 reversible tools, 4 usable tool sides, 8 upper fixed blades, 8 lower fixed blades, 73 average rotor revolutions/min., weight 13000 kg, production 3500-5000 kg/h, emergency stop, drawer inversion system, supports for bearings with sealing system against dust and liquids, Adjustable steel counterblade, hydraulically operated pusher drawer with 1000 mm of useful stroke, transmission system by means of pulleys and belts, electrical panel according to EEC standards with inverter, SIEMENS main internal board, Power: 150 kw or 180 kw, width: 2. ...

QUICK WASHER for RIGID and SOFT PLASTICS, made in AISI304 stainless steel, low water consumption, can be used with hot water or mild detergents, for reground LDPE LLDPE HDPE film, rigid PE PP PVC PET PA ABS PS PC, 7,5 kw motor 400V 50/60Hz, inner auger 400 mm diam., length 3.000 mm., material and water are loaded from the bottom, material discharging is done through a draining auger from top, bearings are positioned outside the wet chamber, seals on the lower bearing to exclude any contact with water, auger speed (and throughput rate) can be adjustable to change throughput rate 500 to 1.000 kg/h, by adding an inverter, Low water consumption (depending on contamination), The water can be mechanically filtered with a [water screening system](.germanplast.eu/listings/5003567-germanplast-vibrating-screen- round-type) (available separately), This machine is to be electrically connected to an  ...

An overbelt metal separator is used to remove ferrous contamination from chopped scraps, on the extraction belt from a shredder. We offer different solutions in size and power even for stainless steel., Just send us your requirements and we will send you a most cost-effective, targeted offer., An overbelt metal separator is the easiest way to remove ferrous contamination from scraps., This machine is a available in different sizes, with different magnetic forces, Constructed according to the Italian Top Quality Standards, This is an example :, OVERBELT MAGNETIC TAPE SEPARATOR TYPE R60-80E, - 800 mm wide at a distance of 200 mm from the belt, - Construction characteristics :, - permanent magnet in bipolar conformation with low-carbon iron structure made with Sr Ferrite permanent magnets with high magnetic induction and great coercive force (guaranteed magnetic field strength 20 years), -  ...

GUILLOTINE REEL SLITTER 60 T, Working width 2.000 mm, Working height 1250 mm, Cutting force 2x30 Ton., No.2 pumps 38+38 lt/min, volume 26,4+26,4 ccm, Speed up: 51 mm/sec, Speed down : (80 Bar) 31-15 mm/sec, Oil tank 255 lt., 15 Kw drive 400V 50 Hz, With Knife protection, hydraulic locking system, pull rope emergency system, protection grids, complete with control panel, top lodging, space saving for hydraulic pack, Users manuals, drawings, CE compliance, 12 month limited warranty, Possible addition of, conveyor belt, fork-lift tray to handle the reel before and after splitting, spare knife, Force: 60 T, working width: 2.000 mm. 78.74, working height: 1.250 mm.

SINGLE SHAFT SHREDDER 75 KW, sturdy structure in electro-welded steel, cutting chamber dimensions mm. 1300x1300, electro-welded sheet metal hopper for top loading, installed power on the rotor 75 kw (100 HP) optional 90 kw (120 HP), hydraulic unit power 5,5 kw (7,5 HP), transmission by belts, 1 rotor, rotor diameter 400 mm., rotor length 1300 mm., 80 reversible tools, 4 usable tool sides, 5 upper fixed blades, 5 lower fixed blades, 73 average rotor revolutions/min., weight 6200 kg, production 2500-3500 kg/h, emergency stop, drawer inversion system, supports for bearings with sealing system against dust and liquids, Adjustable steel counterblade, hydraulically operated pusher drawer with 800 mm of useful stroke, transmission system by means of pulleys and belts, electrical panel according to EEC standards with inverter, SIEMENS main internal board, Power: 75 KW, width: 1.300 mm. 51.18

SINGLE SHAFT SHREDDER 55 KW, sturdy structure in electro-welded steel, cutting chamber dimensions mm. 1100x1300, electro-welded sheet metal hopper for top loading, installed power on the rotor 55 kw (75 HP) optional 75 kw (100 HP), hydraulic unit power 5,5 kw (7,5 HP), transmission by belts, 1 rotor, rotor diameter 400 mm., rotor length 1100 mm., 66 reversible tools, 4 usable tool sides, 4 upper fixed blades, 4 lower fixed blades, 73 average rotor revolutions/min., weight 5500 kg, production 1200-2000 kg/h, emergency stop, drawer inversion system, supports for bearings with sealing system against dust and liquids, Adjustable steel counterblade, hydraulically operated pusher drawer with 800 mm of useful stroke, transmission system by means of pulleys and belts, electrical panel according to EEC standards with inverter, SIEMENS main internal board, Power: 55 kw

GUILLOTINE REEL SLITTER 60 T, Working width 3.500 mm, Working height 1.250 mm, Cutting force 2x30 Ton., No.2 pumps 38+38 lt/min, volume 26,4+26,4 ccm, Speed up: 51 mm/sec, Speed down : (80 Bar) 31-15 mm/sec, Oil tank 255 lt., 15 Kw drive 400V 50 Hz, With Knife protection, hydraulic locking system, pull rope emergency system, protection grids, complete with control panel, top lodging, space saving for hydraulic pack, Users manuals, drawings, CE compliance, 12 month limited warranty, Possible addition of conveyor belt, reel disposer, spare knife on separate offer., Force: 60 T, installed power - used power in work: about 60-65% : 15

GUILLOTINE REEL SLITTER 60 T, Working width 3.000 mm, Working height 2.000 mm, Cutting force 2x30 Ton., No.2 pumps 38+38 lt/min, volume 26,4+26,4 ccm, Speed up: 51 mm/sec, Speed down : (80 Bar) 31-15 mm/sec, Oil tank 255 lt., 15 Kw drive 400V 50 Hz, With Knife protection, hydraulic locking system, pull rope emergency system, protection grids, complete with control panel, top lodging, space saving for hydraulic pack, Users manuals, drawings, CE compliance, 12 month limited warranty, Possible addition of conveyor belt, reel disposer, spare knife on separate offer., Force: 60 T

GUILLOTINE REEL SLITTER 60 T, Working width 3.500 mm, Working height 850 mm, Cutting force 2x30 Ton., No.2 pumps 38+38 lt/min, volume 26,4+26,4 ccm, Speed up: 51 mm/sec, Speed down : (80 Bar) 31-15 mm/sec, Oil tank 255 lt., 15 Kw drive 400V 50 Hz, With Knife protection, hydraulic locking system, pull rope emergency system, protection grids, complete with control panel, top lodging, space saving for hydraulic pack, Users manuals, drawings, CE compliance, 12 month limited warranty, Possible addition of conveyor belt, reel disposer, spare knife on separate offer., Force: 60 T, installed power - used power in work: about 60-65% : 15

GUILLOTINE REEL SLITTER 60 T, Working width 3.000 mm, Working height 1250 mm, Cutting force 2x30 Ton., No.2 pumps 38+38 lt/min, volume 26,4+26,4 ccm, Speed up: 51 mm/sec, Speed down : (80 Bar) 31-15 mm/sec, Oil tank 255 lt., 15 Kw drive 400V 50 Hz, With Knife protection, hydraulic locking system, pull rope emergency system, protection grids, complete with control panel, top lodging, space saving for hydraulic pack, Users manuals, drawings, CE compliance, 12 month limited warranty, Possible addition of conveyor belt, reel disposer, spare knife on separate offer., Force: 60 T

GUILLOTINE REEL SLITTER 50 T, Working width 3000 mm, Working height 1500 mm, Cutting force 2x25 Ton., No.2 pumps 38+38 lt/min, volume 26,4+26,4 ccm, Speed up: 83 mm/sec, Speed down : (80 Bar) 20-41 mm/sec, Oil tank 255 lt., 15 Kw drive 400V 50 Hz, With Knife protection, hydraulic locking system, pull rope emergency system, protection grids, complete with control panel, top lodging, space saving for hydraulic pack, Users manuals, drawings, CE compliance, 12 month limited warranty, Possible addition of conveyor belt, reel disposer, spare knife on separate offer., Force: 50 T, installed power - used power in work: about 60-65% : 15

GUILLOTINE REEL SLITTER 50 T, constructed in sturdy painted steel,, Working width 3.000 mm, Working height 850 mm, Cutting force 2x25 Ton., No.2 pumps 38+38 lt/min, volume 26,4+26,4 ccm, Speed up: 83 mm/sec, Speed down : (80 Bar) 41-20 mm/sec, Oil tank 255 lt., 15 Kw drive 400V 50 Hz, With Knife protection, hydraulic locking system, pull rope emergency system, protection grids, complete with control panel, top lodging, space saving for hydraulic pack, Users manuals, drawings, CE compliance, 12 month limited warranty, Possible addition of conveyor belt, reel disposer, spare knife on separate offer., Force: 50 T

GUILLOTINE REEL SLITTER 50 T, Working width 2.500 mm, Working height 1.500 mm, Cutting force 2x25 Ton., No.2 pumps 38+38 lt/min, volume 26,4+26,4 ccm, Speed up: 51 mm/sec, Speed down : (80 Bar) 31-15 mm/sec, Oil tank 255 lt., 15 Kw drive 400V 50 Hz, With Knife protection, hydraulic locking system, pull rope emergency system, protection grids, complete with control panel, top lodging, space saving for hydraulic pack, Users manuals, drawings, CE compliance, 12 month limited warranty, Possible addition of conveyor belt, reel disposer, spare knife on separate offer., Force: 50 T

GUILLOTINE REEL SLITTER 35 T, Working width 2.500 mm, Working height 1.500 mm, Cutting force 2x17,5 Ton., No.2 pumps 30+30 lt/min, volume 21+21 ccm, Speed up: 84 mm/sec, Speed down : (80 Bar) 40-20 mm/sec, Oil tank 175 lt., 9 Kw drive 400V 50 Hz, With Knife protection, hydraulic locking system, pull rope emergency system, protection grids, complete with control panel, top lodging, space saving for hydrauliC pack, Users manuals, drawings, CE compliance, 12 month limited warranty, Possible addition of conveyor belt, reel disposer, spare knife on separate offer.

Hydraulic Gripper

QUICK WASHER for RIGID and SOFT PLASTICS, made in AISI304 stainless steel, low water consumption, can be used with hot water or mild detergents, for reground LDPE LLDPE HDPE film, rigid PE PP PVC PET PA ABS PS PC, 7,5 kw motor 400V 50/60Hz, inner auger 400 mm diam., length 3.000 mm., material and water are loaded from the bottom, material discharging is done from top, bearings are positioned outside the wet chamber, seals on the lower bearing to exclude any contact with water, auger speed is adjustable to change throughput rate 500 to 1.000 kg/h, throughput rate can be adjusted according to contamination and material, Low water consumption (depending on contamination) About 60 lt., The water can be mechanically filtered with a [water screening system](.germanplast.eu/listings/5003567-germanplast-vibrating-screen- for-water-powder-granule) (available separately) to be reused in the proces ...

grinding length: 800 mm grinding width: 400 mm workpiece height: 375 mm table surface area: 840 x 400 mm table speeds: 0,005 - 35 m/min spindle speeds (infinitely variable): 1000 - 3000 U/min grinding wheel motor: 3,7 kW grinding wheel size: 300 x 50 x 76,2 mm cross adjustment: 100 - 1250 mm/min rapid traverse vertical: 180 mm/min table load: max. 700 kg distance spindle center to table: max. 525 mm total power requirement: kW weight of the machine ca.: 2,8 t dimensions of machine L x W x H: 3,14 x 1,78 x 2,50 m Accessories: magnetic plate 800 x 400 mm, grinding wheel with flange, wheel dressing attachment, wet grinding attachment with paper band filter The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

L-profile: 120 x 120 x 10 mm flat steel: 300 x 15 mm round/square steel: 40 mm punching: dia 28 x 13 mm U/I-profile: 100 mm

AUTOMATIC VERTICAL BINDING BALER, for FILM, WOVEN PP, PET, RIGID AND SOFT PLASTICS, PAPER, CARDBOARD and more, 80 Tons ca. pressing force, 45 kw drive, complete with oil heating and cooling systems, proportional pressure flow controller, Bale size LxWxH 1.100x720 mm (adjustable length), feeding hopper size : 1.100 x 1.600 mm., Average throughput rate, - with 30 kg/m3 materials 5-7 Ton/h, - with 50 kg/m3 materials 9-11 Ton/h, - with 120 kg/m3 materials 17-19 Ton/h, 5 vertical-wire binding, Cycle with no material, no twisting : 25 ca, Pre-press flap with 2 x 20 Ton force, Exchangeable bottom plate in hardox in channel and chamber, oil tank capacity 950 lt., Machine weight ca.25.000 kg., General features, common to all balers:, Construction ìn sturdy carbon steel with top EU components., Compact and easy to use, Automatic binding, Fully automatic with adjustable parameters on touch screen  ...

AUTOMATIC VERTICAL BINDING BALER, for FILM, WOVEN PP, PET, RIGID AND SOFT PLASTICS, PAPER, CARDBOARD and more, 100 Tons ca. pressing force, 45 kw drive, complete with oil heating and cooling systems, proportional pressure flow controller, adjustable channel pressure, Bale size LxWxH 1.100x720 mm (adjustable length), Filling hopper size 1.100 x 1.600 mm., Average throughput rate, - with 30 kg/m3 materials 6-8 Ton/h, - with 50 kg/m3 materials 10-12 Ton/h, - with 120 kg/m3 materials 18-20 Ton/h, 5 vertical-wire binding, upper and lower photocells to control material feeding feeding, Cycle with no material, no twisting : 22 ca, Pre-press flap with 2 x 20 Ton force, Exchangeable bottom plate in hardox in channel and chamber, Baler weight ca.27.000 kg., General features, common to all balers:, Construction ìn sturdy carbon steel with top EU components., Compact and easy to use, Automatic bind ...

AUTOMATIC VERTICAL BINDING BALER, for FILM, WOVEN PP, PET, RIGID AND SOFT PLASTICS, PAPER, CARDBOARD and more, 120 Tons ca. pressing force, 90 kw drive, complete with oil heating and cooling, proportional pressure flow controller, Filling hopper 1.100 x 1.600 mm., Bale size LxWxH 1.100x720 mm (adjustable length), Average throughput rate, - with 30 kg/m3 materials 6-8 Ton/h, - with 50 kg/m3 materials 11-13 Ton/h, - with 120 kg/m3 materials 19-22 Ton/h, 5 vertical-wire binding, Cycle with no material, no twisting : 21 ca, Pre-press flap with 2 x 26 Ton force, Exchangeable bottom plate in hardox in channel and chamber, Machine weight ca 28.500 kg, oil tank capacity : 1.500 kg, General features, common to all balers:, Construction ìn sturdy carbon steel with top EU components., Compact and easy to use, Automatic binding, Fully automatic with adjustable parameters on touch screen panel., A M ...

LIFTING AUGER, for regrinds, box housing mm.400 outer Ø, internal spiral 300 mm Ø, bearings with dust protection, Length 8,5 mt., Collection hopper 900 x 500 mm (or bespoke), exhausting outlet, intermediate supports every 3 mt., Bonfiglioli gearbox, 5,5 kw drive, complete with Users manual. CE compliance and el,.drawings, installed power - used power in work: about 60-65% : 5.5, availability: ca 4 weeks from confirmation, conditions: new machine, type: to collect and lift materials

Heißfolienprägemaschine / Hot Foil Stamping GEBA 1/F-2

Antike Drahtheftmaschine / Antique Stitching machine Gebr. Brehmer Serial-No. 6387 Wunderschön verarbeitete antike Stockpresse  Beautifully crafted antique Spindle Press

Antike Fadenheftmaschine / Antique Sewing machine Gebr. Brehmer 39 Serial-No. 2742 Wunderschön verarbeitete antike Fadenheftmaschine  Beautifully crafted antique Sewing machine

Prägepresse / Hot Foil Stamping Press

900 mm sanding machine for turned products. GENINI mod. LAR90 - Maximum working length 900 mm. - Automatic loader

1m wide OptiFlour II. Bought new in 2022 and only used for a few months. Almost as brand new condition. Matching OptiAir dust extractor available at extra cost.

Delivers smoothly an even batter coverage Provides adhesion for breading Belt width: 600 mm

Smooth and efficient batter coverage to a wide range of products in a wide variety of shapes and styles. Belt Size (mm): 1000 wide

2 x die-sinking EDM machines ZK Genius 700 BJ 1010 and 2019

Single-column eccentric press MÜLLER GEFREES type PDET 5 S/EKMasch. No. Year of manufacture 1988Compressive force 5 ton. Projection 125 mmColumn passage 170 mm Table surface 280 x 220 mmWaste height 90mmLifting area 160 x 100 mmLifting adjustment 4 to 40 mmRam adjustment 30 mmInstallation height largest stroke at the top max. 210 mmStroke rate 200 strokes/min. Clamping pin bore 25 mmTable height above floor 900 mmEngine power 0.55 kWNerg connection 380 volts, 50 Hz- pneumatic clutch-brake combination-

Centrifugal fan NICOTRA - Gebhard type P2M-M3M4J-RRB-ATEX RD/0Fabr. No. 318844/626052/1 Year of construction 2008Volume flow 10000 m³/h = 166 m³/min. Pressure p 1.2 kg/m³Air inlet 500 mmAir outlet 450 x 450 mmEngine speed 1435 rpm. Motor power 4 kWNet connection 400 Volt 50 Hz- Fan wheel with 8 fan blades- Directly flanged drive motor- Mounted adapter ring with flex sleeve 500 mm- Adapter flange for air outlet from rectangular flange 450 x 450 x to 500 mm- Galvanized

At Dairy Machinery UK we offer a large variety of Spare Parts for the below manufactures. Keeping our ongoing assistance with our customers we have achieved best prices for genuine Spare Parts Directly From Manufactures ., Spare parts from these manufacturers, - Alfa Laval, - Tetra Pak, - GEA Westfalia, - GEA Tuchenhagen, - GEA Hilge, - GEA Niro Soavi, - GEA Aseptomag, - Fristam, - Pentair Südmo, - E&H (Endress und Hauser), - APV Gaulin, - APV Rannie, - SPX, - HST, - Buschjost, - Samson, - Sumitomo, - other manufacturers on request, Contact Us for your requirements., Parts available: Alfa Laval Tetra Pak GEA Westfalia GEA Tuchenhagen GEA Hilge GEA Niro Soavi GEA Aseptomag Fristam Pentair Südmo E&H (Endress und Hauser) APV Gaulin APV Rannie SPX HST Buschjost Samson Sumitomo other manufacturers on request, Gaskets for Pasteurisers: GEA, ALFA LAVAL , TETRA PAK, FISCHER,ARSOPI, PIETRIBIASI ...

Distance between points: 1000 mm, Height of points: 180 mm, Max. diameter to be rectified: 355 mm, Max. piece weight between points: 300 Kg, Max. weight with plate: 125 Kg, Transverse travel of the carriage (X axis): 350 mm, X-axis speed: 0.01 / 6.000 mm/min, X-axis Resolution: 0.0001 mm, X-axis measurement system: Digital ruler, Longitudinal travel of the carriage (Z axis): 1.300 mm, Z-axis speed: 0.01 / 15,000 mm/min, Z-axis resolution: 0.0001 mm, Z-axis measurement system: Digital ruler, Working wheel dimensions (od x id x width): Ø500 x Ø203 x 80 mm, Main engine power: 7,5 Kw, Angle of rotation of the grinding head: -30º / +210º, Workhead rotation speed: 10 / 800 rpm, Workpiece holder head cone: MORSE 5, tailstock cone: MORSE 4, Ø of the tailstock shank: 60 mm, Course of the counterpoint reed: 40 mm, Dimensions: 4600 mm Length x 2400 mm Width x 2050 mm Height, Weight approx.: 6. ...

An external lift Büter Hebetechnik GmbH is available. Payload: 2000kg, lifting height: 8160mm, lifting time: approx. 45s, lowering time: approx. 45s, drive power: 6.2kW, stops: 3, ground floor height: 0mm, 1st floor height: 4450mm, 2nd floor height: 8355mm, internal dimensions X/Y: 1500mm/1260mm, largest pallet: CP2. Documentation available. An on-site inspection is possible.

Approx. 170 tool holders, some with tools

GREINER double-strand calibration table getCAL 11.2-5P/4Z - DUAL A (2008) Clamping table (L / W / H): 2 x 11,170 / 2 x 380 / 940 – 1,040 mm Rail spacing: 2 x 320 mm Center Distance Dual: 500 mm Clamping width (max.): 400 mm Height adjustment: 100 mm Side adjustment: (+/-) 15 mm Longitudinal adjustment: 750 mm Tilt adjustment: (+/-) 10 mm 5 vacuum pumps á 4.6 kW incl. 50 ABA 1/2'' vacuum connections 4 cyclone pumps á 1.1 kW Dimensions (L x W x H): 11,200 x 1,580 x 1,200 mm incl. calibration & water tanks GREINER Double Strand Fume/Saw Combination getCOM 30/9-235-S/500 (YOC 2008) Max. profile dimensions (W x H): 235 x 140 (per side) Contact length tracks: 2 x 2,300 mm Number of cleats: 2 x 55 pcs. Lug width: 235 mm (per side) Pull-off force max.: 30 kN (per side) Pull-off speed: 0.5 - 10 m/min Extrusion height adjustable via machine feet: 1,040 – 1,140 mm Saw ...

Siemens Sinumerik 840D control system, incl.: Abrasive preparation, hydraulic unit and portal loading system for loading and unloading the machine, Technical specifications:, Center distance: 600mm, center height: 180mm, maximum grinding diameter: 355mm, maximum workpiece weight: 150kg, maximum Z-axis speed: 11 m/min, minimum Z-axis speed: 0.01 m/min, maximum X-axis speed: 7.5 m/min, minimum X-axis speed: 0.01 m/min, External cylindrical grinding spindle:, Grinding wheel standard (Øa x w x Øi): 600 x 80 x 304.8 mm, Grinding wheel peripheral speed: 5 - 50 m/s, Power consumption of grinding spindle motor: 11 kW, Workpiece spindle:, Taper bore workpiece headstock: MK 5, Power consumption: 2.7 kW, Tailstock:, Taper bore punch point: MK 4, Coolant tank: 2000 liters, lubricating oil: 30 liters, hydraulic oil: 60 liters, Operating voltage: 400 volts, 3 phases, Mains frequency: 50 Hz, Total we ...

TDK GEN20-120-1P230, TDK-Lambda 19 Inch Laboratory Power Supply 44 mm package 0 - 20 V/DC / 0 - 120 A Clocked Input voltage range 85 - 265 V/AC Integrated RS-232 / RS-485 interface External, analogue programming and monitoring Type (general): Rack-mount Item condition: Used, in perfect condition R11B1_EK You can find more laboratory power supplies - new and used - in our shop! International shipping costs on request!

Type: OptiDipper 650 Serial number: 87 Year of construction: 2013 Belt width: 650 mm Product height: max 50 mm Filling: min 40 L Infeed conveyor length: 600 mm Outfeed conveyor length: 950 mm Power: 3 x 400V, 50Hz, 1.8kW Dimensions: 3850 x 1400 x 1350 mm Weight: 850 kg

Type: HBV120 Drum: 2000 litres Capacity: max 1000 kg Vacuum pump: Busch 25 m² Power: 3 x 380V, 50Hz, 3kW Dimensions: 2750 x 1500 x 1900 mm