ge mi fu used for sale

honing diameter: 12 mm stroke: 40 mm throat: mm total power requirement: 15 kW weight of the machine ca.: 5 t dimensions of the machine ca.: m 3 spindle honing machine with in process measuring The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

honing diameter: 80 mm stroke: 280 mm throat: 300 mm total power requirement: 6 kW weight of the machine ca.: 2,6 t Honing Ø 10 - 100 mm Max. honing depth, approx. 250 mm Max. spindle stroke 260 mm Distance between spindle and column 300 mm Mounting height 1,000 mm Table size 350 x 500 mm Height of table above floor 500 mm Spindle speeds in 2 steps, infinitely variable, approx. 85 - 300 rpm 170 - 600 rpm Stroke speed, infinitely variable, hydraulic 0 - 23 m/min Spindle drive 2 kW Total electrical load 6 kW - 380 V - 50 Hz Weight 2,600 kg Accessories / Special Features Built-on 2-station tilting table which accommodates 2 workpieces. Mechanical workpiece clamping, using a manual lever. Hydraulic infeed of the tool. Switch-off via timer. Air measuring device (probably). Honing oil unit. Various splash shields, etc. Condition : Good. Machine can be in ...

4-SHAFT SHREDDER 22 KW, sturdy carbon steel electrowelded structure, anti-wear side walls, loading hopper, shredding surface 600 x 800 mm., n.4 x 800 mm long shafts, n.30 anti-wear cutting knives 20 mm thick, n.30 routing disks, n.2 planetary gearboxes, n.2 x 11 kw motors, inversion on overload, n.18 rpm average, bespoke screen size, extraction prepared for connection with blowing system, SIEMENS LOGO PLC with simple panel for complete control, CE compliance, Users manuals.

4-SHAFT SHREDDER 15 KW, sturdy carbon steel electrowelded structure, anti-wear side walls, loading hopper, shredding surface 600 x 800 mm., n.4 x 800 mm long shafts, n.30 anti-wear cutting knives 20 mm thick, n.30 routing disks, n.2 planetary gearboxes, n.2 x 7,5 kw motors, inversion on overload, n.18 rpm average, bespoke screen size, extraction prepared for connection with blowing system, SIEMENS LOGO PLC with simple panel for complete control, CE compliance, Users manuals.

MAGNETIC SEPARATORS, in form of overbelt plates,, grids, channels, stars, etc.

Including: Injector Hopper Pipe connection diam. 160 mm. Bends Clamps Cyclone Customized to your project

We are selling a large-capacity 3D printer X1000 from German RepRap GmbH. The device is in good condition and has been serviced by Innovatiq., Scope of delivery:, - 1 pc. 3D printer X1000, - Small parts and remaining consumables, Installation space in mm (x/y/z): 1000 x 800 x 600 mm, build speed: 10 – 150 mm/s, Travel speed: 10 – 300mm/s, Layer thickness: 0.02mm, Filament diameter: 1,75 mm, Nozzle diameter: 0.4mm / 0.6mm / 0.8mm, extruder units: DD3 Dual, Extruder temperature: max.290°C, Print bed technology: Heatable up to 120°C, Data transfer/network: LC touch display, wireless printing via WLAN, Ethernet, software: Simplify3D Software, Power consumption: (max.) 2.5kW, approx. 30% in continuous operation, Power connection: Three-phase current 400V (CEE 3L+N+PE), 16 A, Dimensions in mm (w x h x d): 1725 x 1500 x 1320 mm, Weight in kg: 400 kg

Made in sturdy painted carbon steel or AISI 304 stainless steel, drained or covered,.. Customized to your project, just send us your sketch with length, inner and outer diameter, drive, configuration or share your project with us and we will offer you the best solution.

A Geiss large-format vacuum thermoforming machine is available. Panel cutting min.: 1100mm/1300mm, max. panel cutting: 2100mm/1800mm, max. forming depth: 620mm. Additional panel format 1: min.: 850mm/750mm, max.: 1850mm/1250mm. Additional panel format 2: min.: 1050mm/800mm, max.: 2050mm/1300mm. Including a separate loading machine with pneumatic panel separating equipment, an automatic aligner for panel cuts in longitudinal and transverse direction, a pneumatic pusher for removing the molded parts from the loading unit, fully automatic central lubrication of the loading machine, several interchangeable pallets for window panel sets, a storage rack for window panels as well as a vacuum control with four independently adjustable flow stages and an air preparation system. Documentation available. On-site inspection is possible.

Stations: 6, labeling capacity: 3000-4000/h, labeling: wrap-around self-adhesive labels, container formats: 200ml-750ml, bottle formats: 330l Vichy/Longneck/30cl BNR, running direction: left-right, rotation direction: clockwise. Documentation available. On-site inspection is possible.

Nominal output: 9500 bottles/h (based on 0.5 litre NRW bottle, 68x260mm, 370g), mechanical control range: 3800-10,450 bottles/h, cycle time: 9.47s, total bottle cells: 3375, filled: 3175, per row: 135 basket rows, cell pitch: 95mm, chain pitch: 140mm, drive lanes: 3 lanes, discharge lanes: 3 lanes. Total throughput time: 21.32min, total immersion time: 7.24min, caustic immersion time: 5.34min, caustic filling time: 7.05 min, caustic contact time: 9.91min, total rinse time: 123s, total spray time: 47s, water consumption: 2.61m³/h, 275 ml/bottle, heat consumption (operation): 721. 715 kJ/h = 172,247 kcal/h, 75.97 kJ/bottle = 18.1 kcal/bottle, heat consumption (heating): 2,880 MJ = 687,467 kcal, total installed power: 27.2kW, pump power: 20.4kW, drives: 5.7kW, compressed air consumption (at 6bar): 0.2m³/h, dimensions housing: 7162x2740x2500mm. Overall dimensions: 7162x3540x2730mm, minimum ...

Speed: 4500rpm, max. bowl diameter: 300mm/167mm, solids: 2.6kg/dm³, material temperature min./max.: 5°C/100°C, bowl dimensions X/Y: 300mm/1200mm, machine material: stainless steel, operating hours: 62293h. Including spare parts. On-site inspection is possible.

A dissolver basket mill combination machine VMA Getzmann is available. Connected load: 25kVA, flour chamber volume: 4l, container volume range: 75l-750l, product volume range: 50l-400l. The ceramic insert of the flour basket is defective and must be replaced. On-site inspection is possible.

One air shower is available. Two identical air showers with glass inlet and outlet doors and one air shower with glass inlet door and fire protection outlet door (fire protection door). Insulation class: 54, motor power: 40kW, machine dimensions X/Y/Z: approx. 1100mm/1100mm/2950mm. On-site inspection is possible.

Load dimensions: 1200x800mm, max. load capacity: 2t, fork lift: 46-3120mm, fork tine dimensions: 1000x100x40mm, travel speed: 5km/h, motor power: 2kW, length: 2930mm, width: 940mm, operational hours counter: 41h. With documentation, no defects known, an on-site inspection is possible.

tube diameter: 28 mm wall strength: 2 mm bending radius min.: 90 ° Control: 3D TubeSoft Slim total power requirement: 3,5 kW weight of the machine ca.: - kg dimensions of the machine ca.: - mm Description: Round tube steel (S235): 60.0 x 6.0 mm Round tube stainless steel (S 355): 60.0 x 4.0 mm Square tube steel: 50 x 50 x 4.0 mm Rectangular tube steel: 60 x 40 x 2.0 mm max. usable length: 3048 mm Bending speed: 10°/sec including tools (see photos) Mandrel is no longer available, can be retrofitted The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

power capacity: 18,5 kW volt: 400 V ampere: - A total power requirement: 18,5 kW weight of the machine ca.: 0,35 t dimensions of the machine ca.: - m N0. 4700 Parallel shaft geared motor / geared motor NORD / Getriebebau NORD SK 6282 AZ - 180 M / 4 TF H2 n 155 min-1 / max. 2454 Nm / i = 9.39 / hollow shaft Drive: 18.5 Weight approx. 350 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

workpiece weight: 160 kg workpiece length: 250 mm diameter: 620 mm total power requirement: 0 kW weight of the machine ca.: t dimensions of the machine ca.: m Auswuchtwaage für Schleifscheiben und scheibenförmige Prüfkörper Workspace: 620 x 250 Control: max. Prüfkörpergewicht 150 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Number 69 GenSet generator set together with a welding unit Type: MPM 15/400 SS-KA Engine Kubota Power 15 KVA RPM 3000 IP 23 Year of construction 2006 Hz 50 Hours 7440 dB 94 Connection: 32A, 16A Connection below for welding unit 16A Metrics: L: 1.65m H: 1.05m W: 0.85m Weight: 565 kg You can find more machines on our website. If you have any further questions, please feel free to contact us. Adel e.K. Commercial Vehicles-Construction Machines Car Recycling Machine Dismantling Gottlieb-Daimler Str. 26 D-74831 Gundelsheim Phone: 0049 1796710242

Wet Glue Labeling Machine Gernep Labetta Built in 1999 Round Runner Type 3/2/6 BR Chest, neck - back label Bottle Type 0.33 + 0.50 + 0.70 + 1.00L Glass Bottle 5,000 bph Running direction left - right Clockwise

Embossing press Baier GEBA 1/F, installation height 90 mm, printing capacity 800 kg, working size 10cm x 14 cm, year of construction 1973, machine number 73040, in good condition, immediately available If you are interested, we will also be happy to inform you about other machines in our company. You are welcome to visit the machine in our house by prior appointment.

grinding length: 800 mm grinding width: 400 mm workpiece height: 375 mm Control: Siemens 840 D total power requirement: 18 kW weight of the machine ca.: 2,6 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 720 mm turning length: 3.000 mm control: FAGOR 8055 TC/B turning diameter over bed: 470 mm spindle bore: 92 mm spindle nose: DIN-55027-11 spindle diameter: 150 mm spindle drive: 17 / 20,5 kW total power requirement: 28 kW weight of the machine ca.: 5,7 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

3.5 to low-loader with new floor plate, Tuf neu 12/24 Top condition, no damage 13.06.2012

Manufacturer: Genie Model: GTH-5021R Year of Manufacture: 2016 Mass: 16,653 kg (36,712 lbs) Rated Capacity: 5,000 kg Nominal Power: 83 kW Max Drawbar Pull at Coupling Hook: 30,000 N Max Vertical Load at Coupling Hook: 10,000 N Lifting height: 20.86 m Engine: Perkins 854E-E34TA All-wheel drive Remote joystick Full serviced at 4550 h Extra accessories: - Pallet forks - Bucket - Hook Find more here - / Contact us at -

A railing welding device (railing welding jig) Förster is available. Component weight: 300kg, turning radius: 360°, axle height: 1000mm, max. incline: 60°, railing height: 600mm-1200mm, max. profile dimensions X/Y: 80mm/40mm, max. profile diameter: 80mm, machine dimensions X/Y: 5000mm/1200mm. Documentation available. On-site inspection is possible.

Complete professional powder coating plant in excellent condition, available from today. 00000 00000 00000 Turnkey delivery, we take care of all the work Control units from Gema We will respond to your inquiry immediately with all the details. Smooth processing, since 2010 With plastic booths, powder center, pump delivery, automatic guns, visual controls from Siemens Simatec 3D scanners, according to the latest technology... and of course pre-treatment with nano-coating Drive only e.g. 2 hours and look at a reference plant, one of many in the DACH region (since 2010) Contact us now, it's worth asking See PDF for all details powceq com (project page) , see also video here

Gestra Condensate Compensator 50 l, 8 bar stainless steel with connection flanges DN 50, DN 80, DN 20, with stainless steel shut-off valve DN 20, emptying oval flange and 3 foot spindles + Check valve DN 80 Cylinder 240 Klepper floors each 100 long

Type: OptiCoater 600 Serial number: E022210405068 Year of construction: 2020 Belt width: 600 mm Power: 3 x 400V, 50Hz, 3kW Dimensions: 1800 x 1350 x 1450 mm Weight: 456 kg

DRY PELLETIZER FOR PVC AND COMPOUNDS Suitable for extruders with production rate up to 200 kg/h, made in sturdy steel and mounted on a frame equipped with wheels for easy disassembly, granulating chamber in horizontal axis, built in stainless steel, quick opening safety device, knife-holder with fluctuating star to reduce knives consumption., self adjusting knives to nozzle by means of a slide system which keeps knives pressed on the die, reducing wear 2,2 kw drive, 3.000 rpm with extra strong bearing and long shaft, cutting die in anti-wear steel with number and Ø of holes bespoke to project. 1,5 kw Venturi blowing system + pipes and cyclone, n.2 thermoregulation areas, knife mounting template, electric cabinet and touch screen control board with modem for remote assistance, 3 mt.cable machine/panel, flange built to design to fit your extruder, heated by ceramic heating elements , temp ...

WHEELED SCREW CONVEYOR to charge TANKER TRUCKS, for plastic granules, capacity ca.60 m3/h, Constructed in carbon steel with antirust painting, Outer Ø 300 mm, Bearing casing with dust seals, loading hopper 1.000 x 1.000 mm., 7,5 kw gearmotor, wheeled supporting structure, Total screw length 7,0 mt., Discharging height 4,5 mt., flexible pipe with capacity sensor on discharge, complete with control panel, CE compliance, Users manual, Electrical drawings., ALSO AVAILABLE IN STAINLESS STEEL VERSION, See other similar items with different features [GE751](.germanplast/listings/7506589-wheeled-tanker-loading-screw-con veyor-basic)[-GE753](.germanplast/listings/7553224-wheeled-tanker-load er-adj-height-with-automatic-retractable-sleeve)[-GE750](.germanplast/ listings/6874982-tanker-loading-system-60-m3-h-automatic-retractable-s leeve), installed power - used power in work: about 60-65% : 7,5,  ...

WHEELED TANKER TRUCKS LOADING SYSTEM, for plastic granules, Loading speed 60 m3/h, Made in sturdy painted carbon steel structure, including two big bag supporting structures, n.2 frames to fix the bags on the structure by lifting the pre-hooked frames, The height of the structures can be adjusted to suit the size of the big bags, and two side ladders provide easy access to the top of the structure., The two bags rest on safety supports to prevent hands from being crushed when the bottom is opened., Sturdy hooks hold the big bag straps in place., 1.000 x1000 mm. hopper to collect the material from the big bags., A flap door at the bottom, with a safety micro, facilitates maintenance and cleaning operations., the 7,5 kw driven screw will lift material from the hopper, Discharge height 4,5 m.from floor, Screw length 8.300 mm, The screw can be lowered for storage, The bearings are dust-tight ...

SEMI-AUTOMATIC, NON-STOP SCREENCHANGER, Screen Ø 30 to 400 mm. Can fit any type of extruders with single or twin screws Made in sturdy steel on supporting wheeled cart for easy transport Smart construction out of our long experience in plastic extrusion Complete with control panel for temperature and pressure management Hydraulic power pack Connection flanges available on given design of pelletizer and extruder Single drawer with 2 sliding breakers (available also double/4 breakers), when asking for a quotation, please detail:, - Type of extruder, - screw (s) diameter, - production rate in kg/h, - material tyupe, - material MFI, - contamination and average %, - filtration required in mesh or my, type: Semi-automatic, non-stop

PELLETIZERS WATER RING, Constructed with first quality materials and components they are reliable accessories to your extrusion line, compact and economic., made in sturdy stainless steel, With self adjusting knives to nozzle, with less wearing out and incresed efficiency, re-circulating water pump with water filtering unit for re-use, Heat exchanging unit included. You can connect it with your factory chilling unit., electric cabinet with Siemens touch screen for setting all parameters, Modem for remote assistance, Suitable for a variety of plastics and masterbatches., Size bespoke to your project : 100 to 3.000 kg/h, Materials : LDPE HDPE LLDPE PP PS PC ABS, capacity: 100-3.000 KG.

WHEELED SCREW CONVEYOR to charge TANKER TRUCKS, capacity ca.60 m3//h, Constructed in carbon steel with antirust painting, Outer Ø 300 mm, Bearing casing with dust seals, loading hopper 1.000 x 1.000 mm., 7,5 kw gearmotor, wheeled supporting structure, adjustable height by manual hydraulic pump, Total screw length 7,0 mt., Discharging height 4,5 mt., flexible discharging pipe with Capacity sensor, complete with control panel, CE compliance, Users manual, Electrical drawings., ALSO AVAILABLE IN STAINLESS STEEL VERSION, See also other versions with different features [GE752-](.germanplast/listings/7553190-wheeled-tanker-loader-7-mt-long -4-5-mt-discharging-point-or-bespoke)[GE753](.germanplast/listings/755 3224-wheeled-tanker-loader-adj-height-with-automatic-retractable-sleev e)-[GE750](.germanplast/listings/6874982-tanker-loading-system-60-m3-h -automatic-retractable-sleeve), capacity: 60 ...

AIR DRYING TUNNEL, for strands, dimensions 2.000 x 300 mm. (or bespoke), blower on bottom with 2 conveyors which send air through slits, constructed in AISI304 stainless steel

SINK-FLOAT SEPARATION TANK for PLASTIC SCRAPS, Constructed in thick AISI 304 STAINLESS STEEL with reinforced plates and profiles, Dimensions 5,0 X 1,5 mt., Inlet hopper for shredded plastics, Flanged water in/out ports, taps and ball valves, n.2 x 1,5 kw.driven rollers for material movement with Bonfiglioli gearboxes, n.1 chain conveyor on bottom to extract the sunk materials, n.1 diagonal stainless steel chain conveyor, collection drained auger for extraction of floating material, size: 5,0 x 2,4 mt., capacity: 800-1.500 kg/h depending on materials

TANKER TRUCK LOADING SYSTEM, for plastic granules, Maximum speed 60 m3/h, Made in sturdy painted carbon steel structure, including two big bag supporting structures, n.2 frames to fix the bags on the structure by lifting the pre-hooked frames, The height of the structures can be adjusted to suit the size of the big bags, and two side ladders provide easy access to the top of the structure., The two bags rest on safety supports to prevent hands from being crushed when the bottom is opened., Sturdy hooks hold the big bag straps in place., 1,000 x1000 mm. hopper to collect the material from the big bags., A flap door at the bottom, with a safety micro, facilitates maintenance and cleaning operations., the 7,5 kw driven screw will lift material from the hopper at a rate of 60 m3 per hour, the 300 mm.Ø screw can be lifted and lowered to easily move inside and outside., Maximum discharge heig ...

VIBRATING SCREN - best solution for liquids and powders, Dynamic three-dimensional vibrations., The vibratory motion of the screen spans both horizontal and vertical directions, providing the flexibility of adjustment in both axes., Minimal installation requirements., No vibration transmission from the upper section to the base, Possible addition of wheels to the base., Quick disassembly for cleaning or mesh replacement., Each screen supports the installation of 1 to 4 separation stages, yielding 2 to 5 distinct product fractions., Constructed in carbon steel or stainless steel., All parts in contact with material are on AISI 304 stainless steel Fully compliant with CE regulations most required screen diameter from 400 mm up to 2.200 mm to cover all needs, self cleaning system,, Just ask for your own vibrating screen by listing the following specs:, - material, - process, - size of good  ...

VERTICAL MIXER 14.000 lt., Total height approx 5.500 mm, Loading from top with cyclone and dust sleeves collector, Max diam.2.380 mm., Constructed in painted electro-welded carbon steel., Inner auger diam.350 mm., Sampling hopper with safety grid and shutter, mm.600×500, Pulley and belt transmission, protected by carters, Inspection doors with safety limits, Cleaning hinged door with on bottom of cone for complete discharging,, with safety opening, Side discharging pipe to big bag with valve, paddle type max level indicator, automatic greasing kit, 11 kw electric motor, Complete with control panel., Electric voltage: 400 V, 50 Hz, auxiliaries a.c. 24 V, CE compliance and instruction manual, installed power - used power in work: about 60-65% : 11

SINK-FLOAT SEPARATION TANK for PLASTIC SCRAPS, Constructed in thick AISI 304 STAINLESS STEEL with reinforced plates and profiles, Dimensions 5,0 X 2,4 mt., Inlet hopper for shredded plastics, Flanged water in/out ports, taps and ball valves, n.2 x 1,5 kw.driven rollers for material movement with Bonfiglioli gearboxes, n.1 chain conveyor on bottom to extract the sunk materials, n.1 diagonal stainless steel chain conveyor, collection drained auger for extraction of floating material, size: 5,0 x 2,4 mt., capacity: 800-1.500 kg/h depending on materials

WEIGHING SYSTEM FOR BIG BAG SUPPORTING AND FILLING STATION, The system includes a sturdy painted carbon steel structure to hold 2 big bags, the pneumatic system to fill them from a source, a diverting valve set to fill the bags alternatively and automatically, a weighing platform on which tha bag rests, with loading cells and a digital scale to check and set the weight of each bag ., price options: new machine bespoke to project

Constructed according to the high Italian quality standards, Made in sturdy carbon steel welded structure Flat bottom with horizontal screw and doctor blade, or conical bottom with diagonal screw (depending on project requirements) plexiglass inspection window, Electric motor bespoke to project material and size paddle type minimum level indicator Bolted inspection door, Safety devices, CE compliance, drawings, user manual, Can be integrated with our [DRYING SYSTEM](.germanplast.eu/listings/4115725-drying-system-for-vertical-mi xers), price options: size and shape bespoke to project

The system can be used for granulate, reground, agglomerate or powder, Including: hopper, injector, blower and piping length bespoke to your project., blower of suitable power, Cyclone with filtering system and a diverting valve Constructed in sturdy painted steel or galvanized steel The supporting structure can hold 1 or 2 big bags, Possible addition of weighing system for each big bag

TANKER TRUCK LOADING SYSTEM, for plastic granules, Loading speed 60 m3/h, Made in sturdy painted carbon steel structure, including two big bag supporting structures, n.2 frames to fix the bags on the structure by lifting the pre-hooked frames, The height of the structures can be adjusted to suit the size of the big bags, and two side ladders provide easy access to the top of the structure., The two bags rest on safety supports to prevent hands from being crushed when the bottom is opened., Sturdy hooks hold the big bag straps in place., 1.000 x1000 mm. hopper to collect the material from the big bags., A flap door at the bottom, with a safety micro, facilitates maintenance and cleaning operations., the 7,5 kw driven screw will lift material from the hopper, Discharge fixed height 4,5 m.from floor (or bespoke), Screw length 8.300 mm, The bearings are dust-tight and automatically greased., ...

TANKER TRUCK LOADING SYSTEM, for plastic granules, Loading speed 60 m3/h, Made in sturdy painted carbon steel structure, including two big bag supporting structures, n.2 frames to fix the bags on the structure by lifting the pre-hooked frames, The height of the structures can be adjusted to suit the size of the big bags, and two side ladders provide easy access to the top of the structure., The two bags rest on safety supports to prevent hands from being crushed when the bottom is opened., Sturdy hooks hold the big bag straps in place., 1.000 x1000 mm. hopper to collect the material from the big bags., A flap door at the bottom, with a safety micro, facilitates maintenance and cleaning operations., the 7,5 kw driven screw will lift material from the hopper, Discharge fixed height 4,5 m.from floor, Screw length 8.300 mm, The bearings are dust-tight and automatically greased., at the end o ...

OPTICAL VIS+NIR SORTER, increase the quality of your product with a very economical, highly performant solution., Effective separation: Removes impurities, different colors, and other contaminating materials., Sample memory: Learns from samples to separate based on texture and color., Improved quality: Enhances product quality, ideal for the recycled plastics market., Quick assistance: Fast intervention from an Italian company. 24/7 response and quick intervention and assistance from this small, versatile Italian Company., Suitable for various materials: Can sort PET, HDPE, PP, PVC, PC, ABS, PMMA, and more., Customizable: Available with 1-6 channels., NIR technology: Detects stones, glass, soil, and other dense bodies., Polymer detection: Identifies different polymers using short-waved infrared cameras., A.I. software: Learns from previous selections to improve over time., Compact size:  ...

with bespoke exchangeable screen (8-10-12-14-16 mm….), to obtain a more uniform size on agglomerated materials, new machine, complete with lifting auger which collects, material from the discharging hopper of the agglomerator. constructed in a state-of-the-art manner with safety devices side doors basket size about 1.500 mm x diam.600 mm. (or bespoke) gearmotor 0,75 kw screw diam. 220 mm 1,5 kw It can be completed with a pneumatic extraction system to bag filling station or vertical mixer, price options: new machine, bespoke to projecr

Starting product :, car, 4x4, truck tyres, agri tyres max diam. 1.400 mm and max thickness 300 mm., Final product : 80 - 100 mm.chopped (for inceneration), 4 - 6 mm.crumbs, 2 - 4 mm.crumbs, 1 - 2 mm.crumbs, 0,5 - 1 mm.crumbs, 3 operators per shift, required space : about 30 x 22 mt., calculated on a 220 days/year 8 h/day = 3.520 T/year - 16 h/day = 7.040 T/year, Harmonized steel as a residual product., Average throughput rate of granulate : 2 Ton/h in input (throughput rate depends on feeding rate and on the kind of tires), installed power : about 650 kw used at 65%, Delivery time : about 6 months from confirmation, Main machines:, Debeader - available manual (20-25 tyres/h) or automatic (45-50 tyres /h), for truck tyres only, feeding conveyor belt, Dual shaft shredder 1.500 mm wide, transport belt, discs screen, transport belt, transport belt for fine material, transport belt to return  ...

SINGLE SHAFT SHREDDER, V Rotor width 1.500 mm. Rotor diameter 500 mm 16.69″ Motor power 90 kW n.82 knives 60 x 60, adjustable counter-knife, off-set rotor bearings (low maintenance), V-Rotor with knife pockets, Welded knife holders with screwed knives and covered bold heads, Offset rotor bearings ( low-maintenance / closed ), Fast hydraulic backwards incl. different settings by PLC control and anti shock valve, Shredding room unpainted, Movable screen basket (electro-hydraulically), Screen thickness 10mm, Hydrodynamic starting clutch (energy saving system for machine start), Electromechanical drive with heavy duty gearbox, Control cabinet incl. 5m cable, Electrical control system Siemens S7 PLC control, Reverse counter and transmission limit switch (safety package), Star delta starter, Universal joints for piston with ram impulse and load-related ram function, Machine frame on anti - v ...