ge mi fu used for sale

Key data: 24 KW, 30 kVA

We currently offer: Number 50 Gesan generator set Engine Perkins Power: 24 KW / 30 KVA Year of construction 2003 Hz 50 RPM 1500 Hours: 10654 dB 95 Metrics L: 2.45 W: 1.15m H: 1.60m The generator set runs, but only manually. No display start. You can find more machines on our website. If you have any further questions, please feel free to contact us. Adel e.K. Commercial Vehicles-Construction Machines Car Recycling Machine Dismantling Gottlieb-Daimler Str. 26 D-74831 Gundelsheim Phone: 0049 1796710242

Specifications Center width mm 1000 Tip height mm 300 Grinding length mm 1000 Workpiece weight between tips kg 800 Load on the workpiece spindle during on-the-fly grinding Nm 200 X-axis - infeed movement Feed speed mm/min 0.01-8000 Linear measuring system, internal resolution mm 0.0001 Z-Axis - Table Movement Table speed mm/min 0.01-8000 C-axis - workpiece headstock Speed min-1 0-300 Drive power kW 5 Pick-up taper MK 5 / KK 6 Grinding spindles Power grinding spindle motor with water cooling kW 15 Grinding wheel circumferential speed m/s 35 (63) Grinding wheel, standard mm 600x80x203.2 Tailstock MK 5 pick-up taper Workpiece Tension Spring Hydraulic Retraction

Connected load 380V 6.8kW 12A with sliding table 1100 mm Table size 1100 x 900 mm Height adjustment with hand crank Integral stop jaws Stops individually adjustable via Siko counter Aigner milling cutter protection device Suction 1x120 1x150 mm Speeds: 2900/4400/6000/8000/10000 rpm

Make: Gea model : ONE 15TS Year : 2018 Serial number : 14432 Bar : 200 Stages : 2 Capacity : 2000 L/h Spare parts included Manual Book included Ready to to plug in and run . NEVER USED

Technical details Grinding length max. 600 mm Grinding width max. 350 mm Control conv. Distance from spindle center to table max. 525 mm Magnetic clamping plate 600 x 350 mm max. table load 400 kg Table longitudinal movement 660 mm Table speed 2 - 28 m/min Transverse movement 360 mm Grinding wheel dimensions max. 300 x 50 x 76.2 mm Clamping width max. 30 mm Drive power - grinding spindle 3.7 kW Total power requirement 8 kW Machine weight approx. 2.1 t Space requirements approx. 4.5 x 3.0 x 2.4 m

- For vertical shooting - Load capacity - 250 kg - Suction plate diameter 2 x 300 mm

Diaphragm valve DN40, plastic diaphragm valve 2/2 way -Type: 677 25D 0 1142 -Max. pressure: 6 bar -Weight: 1.6 kg

Check valve, check valve -Type: RK 86 DN 20 -Connection: DN20 -Nominal pressure: PN40 -Total length: 16 mm -Material: stainless steel -Weight: 0.4 kg

Check valve, check valve -Type: RK 86A DN 32 -Connection: DN32 -Nominal pressure: PN40 -Material: stainless steel -Weight: 0.8 kg

Check valve, check valve -Type: RK 86 DN 25 -Connection: DN25 -Nominal pressure: PN40 -Material: stainless steel -Number: 2x valves available -Price: per piece -Weight: 0.5 kg/piece

Check valve, check valve -Type: RK 86 DN 20 -Connection: DN20 -Nominal pressure: PN40 -Material: stainless steel -Number: 2x valves available -Price: per piece -Weight: 0.4 kg/piece

Check valve, check valve -Type: RK 86A DN 20 -Connection: DN20 -Nominal pressure: PN40 -Material: stainless steel -Number: 6x valves available -Price: per piece -Weight: 0.4 kg/piece

Check valve, non-return valve -Type: RK 86A -Connection: DN40 -Nominal pressure: PN40 -Total length: 32 mm -Material: Stainless steel -Number: 2 valves available -Price: per piece -Weight: 1.2 kg/piece

Check valve, non-return valve -Type: RK 86A -Connection: DN32 -Nominal pressure: PN40 -Total length: 28 mm -Material: Stainless steel -Number: 5 valves available -Price: per piece -Weight: 0.8 kg/piece

Check valve, non-return valve -Type: RK 86 -Connection: DN80 -Nominal pressure: PN40 -Total length: 50 mm -Material: Stainless steel -Weight: 3.5 kg

Programmable rotary encoder, GEL 2444KM1G5K030, Lenord & Bauer, new Please note: This is an original product and not a replica from... Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. New! - never been used and is completely new, - comes from a spare parts warehouse of a certified production facility, - is in its original packaging, 6 months warranty We give you 6 months warranty for these goods from the date of invoice. In case of any defect, which is not the fault of the buyer, the goods can be returned. We will refund the buyer only the product price paid to us. Updating in case of digital components is excluded. Also excluded is liability for direct and indirect consequential damages. Our terms and conditions apply, see our website. Austrian law applies without exception and court location St. Pölten.

Welding current max. 260 A 260 A at 60% ED 201 A at 100%ED Remote Controller SELCO RC08 Space requirement L - 560 x W - 240 x H - 400 mm Weight approx. 37 kg

Payload 10,000 kg Rope diameter 22 mm x 150 meters length as specified in the documentation Operating pressure 55 bar to max. 80 bar Flow rate 19 litres / min to max. 272 litres / min Rexroth hydraulic motor Hydraulic control block with mounting base Documentation and test book available The winch was used on a test bench / test tower. Space requirement L - 2,100 x D - 1,400 x H - 1,300 mm complete with control block Weight approx. 1,500 kg

- ideal embossing press suitable for book cover, die-cuts from leather, imitation leather and cloth, as well carton and und carrier bags, flat plastic parts - desk model - embossing surface 15 x 21 cm - autom. foil feed

Sheet metal centering pull-down unit GENUSTECH PM4I2V395MEMB50C-287 flange diameter: Ø 56 / 72 mm Sensor unit: SENSTRONIC A1202R6K700111 10 - 55 V DC approx. 0.2 m Connection cable New ! Dimensions: 210 x 80 x 90 mm

Spherical plain bearings, radial spherical plain bearings, ball bearings, for hydraulic cylinders -Condition: unused -Type: GE120UK-2RS -Number: 3x spherical bearings available Price: per piece -Weight: 7.9 kg

Drawbar head, control unit, operating lever, joystick, drive switch, single-axis joystick, spur gear drive, multi-axis controller -Manufacturer: Gessmann, Joystick Multi Axis Controller -Type: 0208873 EP/160 -Quantity: 1x Joystick available -Dimensions: 83/83/H165 mm -Weight: 0.6 kg

Drawbar head, control unit, operating lever, joystick, drive switch, single-axis joystick, spur gear drive -Manufacturer: Gessmann, Joystick Single-Axis Controller -Type: S21/22 -Number: 7 joysticks available -Price: per piece -Dimensions: 100/100/H260 mm -Weight: 1.1 kg/pc.

Drawbar head, control unit, operating lever, joystick, drive switch, single-axle joystick -Manufacturer: Gessmann, Single-axis joystick -Type: S 14 -Number: 20 joysticks available -Price: per piece -Dimensions: 70/50/H145 mm -Weight: 0.2 kg/pc.

Laser Welding Machine – IPG Photonics GENESIS on a marble measuring base Cell Model: SYSLC0000058U Serial Number: PD206000 Power supply: 380-415 VAC Phases: 3P+N+PE Frequency: 50/60Hz Full Load Current: 25 FLA Overcurrent protection: 30 A SCCR (Short Circuit Current Rating): 10 kVA Electrical diagram: DOCCHSDMPSXX0225 Production Date: September 2022 2. Laser Source Model: YLR-1500-WC Serial Number: PLMP32200563 Power supply: 200-240 VAC, 1 phase, 50/60 Hz Rated Power: 4500VA Production date: March 2022 3. Chiller – IPG Photonics Model: LC71.01-A.4.5/6 Serial Number: PC220200019 Production date: February 2022 Power supply: 400/480 V, 3~ (3-phase), 50/60 Hz Overcurrent protection: 30 A / Type 1 Short-circuit current: 50 kA Rated Full Load Current: 16/17 A Motor Current (Max Motor Load): M1 5.5 A Electrical Diagram: P35-001221 Cooling capacity: 5.5/5.9 kW  ...

Manufacturer GEMINI Model GHT-4 720 x 3000 Year 1999 CNC FAGOR 8055 TC/B Capabilities Max turning. On bench/carriage 720 / 470 mm. Stitch height from guide 366 mm. Distance between points 3,000 mm. Progress Axis Fast Forward (X/Z) 8,000 mm/min Axle work advance (X/Z) 8,000 mm/min Head Main shaft hole diameter 92 mm. Nose Head DIN-55027-11 Axle diameter in the front bearing 150 mm. Head revolutions 0-1600 No. of automatic head ranges 2 Main engine power 17 / 20.5 kW Maximum torque main engine 1590 / 1920 Nm Counterpoint Tailstock shank diameter 100 mm Tailstock rod travel 200 mm Morse rod housing 6 Bench Width 430 mm. Height to the flat guide 775 mm. Turret Turret type Duplomatic VDI 40 No. Motorized positions turret 8 Additional equipment 3 Claws Self-centering Ø 315 mm. INCLUDED Plate protection INCLUDED Fixed Steady Rest Cap. 20/200 INCLUDED Ful ...

Technical key data: Year of manufacture: June 2015 Width: approx. 19.00 m Length: approx. 25.00 m Eaves height: approx. 4.50 m Construction: hot-dip galvanized steel frame construction (bolted) Building position: free-standing on three sides, a gable wall attached to a lower intermediate building Roof & wall: insulated sandwich panels Construction & Reusability: Hot-dip galvanized, bolted supporting structure → can be optimally dismantled Very well-preserved sandwich panels → almost 1:1 reconstruction possible Core advantage: real second-life hall with minimal loss of substance Roof & lighting concept: Trapezoidal sheet metal sandwich roof continuous ridge skylight strip Additional suspended LED lights Result: very bright, energy-efficient hall Gates & Usage: 2 sectional doors with light segments Suitable for forklifts, vehicles and logistic ...

We sell 230 x iPads 6th generation, 128GB, cellular 80% are in original packaging, used, tested grade A. In most cases, the entire lot can only be handed over in its entirety. More information on request. In most cases, advertised products can only be sold as a complete lot. More information on request. We look forward to receiving inquiries from Germany and internationally. We have many more refurbished/used hardware from the areas of the systems mentioned here as well as from the areas of other systems from these manufacturers available: IBM, DELL, HPE, ORACLE, NETAPP, QUANTUM, STK, FUJITSU, SGI, HDS, EMC, Supermicro, BULL, NEC, CRAY, 3Com, ADVA, Alcatel, Brocade, Cisco, Enterasys, Extreme Networks, Huawei, Marconi, Nortel, Qlogic, Avaya, ORACLE Tested, tested used hardware at low prices from HASCON! Sales are only made to companies. We have available complete sys ...

Excellent Complete Myford Super 7 Metric Lathe Gearbox & Power Cross The lathe also comes with various extras which i will list out below. I may miss some but will do my best 5" 4 jaw self centering chuck (Pratt Burnerd) 3" 4 jaw self centering chuck (Pratt Burnerd) 6" 4 jaw independant chuck (Pratt Burnerd) 3" 3 jaw Self centering chuck (Pratt Burnerd) 4" 3 jaw self centering chuck (Pratt Burnerd) Many of the chucks got internal and external jaws 6 jaw swiss chuck with internal and external jaws Albrecht 0-3mm chuck with morse taper no1 Albrecht 0-6.5mm chuck with morse taper no1 Jacobs 0-3/8" chuck with morse taper no1 9" face plate 7" face plate x 2 6" face plate Jacobs 1/2" tailstock chuck Jacobs 3/8" tailstock chuck Jacobs 3/8" tailsock chuck Jacobs 1/4" tailstock chuck German 1/4" tailstock chuck Myford vertical slide swivel type with dials fitted Myford  ...

Specifications CNC-controlled glass cutting table The Intermac Genius CT37 is a compact yet powerful CNC cutting table for flat glass , designed for precise, fast, and reliable cutting. This model is ideal for manufacturing companies seeking an efficient solution for daily cutting work with high repeatability. Specifications Model: Intermac Genius CT37 Type: CNC-controlled glass cutting table Cutting range: approx. 3700 mm Glass thickness: 3 – 19 mm Cutting head: motorized, automatic pressure regulation Optimization: integrated cutting optimization software Transport: air cushion or roller table (depending on version) Control: industrial CNC control with touchscreen Connections: 400V – 3 phases Condition of the machine The machine is functional and complete CNC control works correctly Mechanically in good condition Cutting head and drive checked Ready to use ...

Code: 0400 Brand: SCM GENIUS Model: M 10/SI Universal 6-works combined machine with 3 motors for woodworking, joinery, furniture, custom-made furniture , window and door frames, doors and various Specifications: Three-phase motors V.380/50 Surface planer: Total table length 1400 mm Table width 300 mm N° 3 blades Motor Hp 3 Thickness planer: Max planing width 300 mm Max planing thickness 150 mm Feed speed 7 mt/min Table lifting by handwheel Circular saw: Max blade diameter 250 mm Hole 20 Max cutting height 85 mm Max cutting width 700 mm Blade tilt 0–45° Motor 2 Hp Panel saw: Flag-type sliding carriage mounted on a movable bar Spindle moulder: Spindle diameter 30 mm Vertical stroke 120 mm Spindle speed 3000/4500/6000/7500 rpm Max tool diameter 150 mm Max spindle projection over table 100 mm Motor 2 Hp Mortising machine: Table dime ...

OFFER FOR SALE – GE FRAME 6 (6001B) GAS TURBINE GENERATING UNIT We are pleased to offer the following gas turbine generating unit for sale: Equipment Details Model: GE Frame 6 (6001B) Year of Manufacture: 1997 Commissioned: 1998 Output Rating: 34.49 MW Generator Output: 33.8 MW / 42.25 MVA Frequency: 50 Hz (convertible to 60 Hz) Operating Speed: 5,114 rpm Total Equivalent Operating Hours (EOH): 68,448 hours Fuel Capability: Dual Fuel (Natural Gas / Fuel Oil) Scope of Supply The package includes: Gas Turbine (GE Frame 6, Model 6001B) Diesel Starting System Accessory Gearbox (AGB) Load Gearbox (LGB) Generator Exciter Associated auxiliary systems and controls Maintenance History The unit has undergone scheduled major inspections, including: Combustion Inspections (CI) Hot Gas Path Inspections (HGPI) Major Inspections (MI) Upgrade History Major upgr ...

Pneumatic clamp GENUS, JOUCOMATIC PPDUE2563PA K63D25M New ! Dimensions: 220 x 85 x 80 mm

Pneumatic clamp GENUS, JOUCOMATIC PPDUE5063PA K63D50M New ! Dimensions: 250 x 90 x 80 mm

Pneumatic clamp GenusTech, JOUCOMATIC MPL25EDEP N°: 99712 New ! Dimensions: 450 x 200 x 70 mm

GEKA HYDRACROP 110 SD hydraulic ironworker machine was built in 2020 in Spain by MAQUINARIA GEKA S.L.U. The machine is designed for the versatile machining of steel parts, enabling to perform multiple operations on a single machine, which increases production efficiency in industrial plants and locksmith workshops. The GEKA HYDRACROP 110 SD is equipped with 5 individual workstations, designed for punching holes and shearing flat bars, angle bars and steel bars. Each station uses interchangeable tools made of tool steel, which enables adaptation of the machine operation to the current production needs. The stations are controlled by two hydraulic cylinders and separate foot switch controlls, enabling the simultaneous operation of two operators at different stations and increasing production efficiency. All this is complemented by a robust design that maintains high stability during eve ...

GEKA HYDRACROP 110 SD hydraulic ironworker machine was built in 2009 in Spain by MAQUINARIA GEKA S.L.U. It is an extremely powerful and versatile machine designed for complex machining of steel parts, making it ideal for use in both production plants and locksmith workshops. The machine enables multiple machining operations to be performed in one place, such as punching holes and shearing flat bars, angle bars and steel bars. The GEKA HYDRACROP 110 SD is equipped with 5 independent workstations with interchangeable tools made of high-quality tool steel. Each station is hydraulically controlled by two cylinders and separate footswitches. This solution enables the simultaneous operation of two operators at different stations, which results in increased efficiency and production effectiveness. All this is complemented by a robust design, ensuring high stability even under intensive use.  ...

Diaphragm valve GEMÜ 690/15/D 02052-1-1106 Dimensions: 280 x 260 x 140 mm

Diaphragm valve pneumatic GEMÜ series 610109 610 / 12 / D1 20 52-1 HP PB 0 - 4,4 5 bar pneumatically operated PST 4 - 7 bar 90°C Dimensions: 110 x 105 x 105 mm

Directional control valve, valve with pneumatic actuator GEMÜ 314/15/M 195-1-1 G1/2 max. 180°C New ! Dimensions: 230 x 100 x 100 mm

Coolant Valve GeMü 514 15D 1 9 51 1

Diaphragm valve GEMÜ 610 / 15 /D28 20 52-1 HP PB 0 - 4.5 bar pneumatically operated PST 4 - 7 bar 90°C Dimensions: 180 x 115 x 90 mm

Siemens Sinumerik 840D control, incl.: grinding tool preparation, hydraulic unit, and portal loading system for loading and unloading the machine, Technical specifications:, Tip distance: 600mm, tip height: 180mm, maximum grinding diameter: 355mm, maximum workpiece weight: 150kg, maximum Z-axis speed: 11 m/min, minimum Z-axis speed: 0.01 m/min, maximum X-axis speed: 7.5 m/min, minimum X-axis speed: 0.01 m/min, External/internal grinding spindle:, Grinding wheel standard (Øa x b x Øi): 600 x 80 x 304.8 mm, Grinding wheel circumferential speed: 5 - 50 m/s, Power consumption of grinding spindle motor: 11 kW, Workpiece spindle:, Taper bore workpiece headstock: MK 5, Power consumption: 2.7 kW, Tailstock:, Taper hole center point: MK 4, Coolant reservoir: 2000 liters, lubricating oil: 30 liters, hydraulic oil: 60 liters, Operating voltage: 400 volts, 3 phases, Mains frequency: 50 Hz, Total w ...

; Gross weight [kg]: 6650; Accessories: 20FT Unused Genset Container

; Gross weight [kg]: 13500; Accessories: 40FT HC Unused Genset Container