ge mi fu used for sale

Carbolite Gero AX30 Heating Oven Original price 3185 € Heating cabinets of the Apex AX series are economy laboratory devices for temperatures up to 250°C. The tabletop units are equipped with R38 PID controllers as standard. Digital PID Controller R38 Recirculating air fan for short heat-up times and excellent temperature homogeneity Stainless steel inner chamber Two height-adjustable, chrome-plated lattice shelves Door with locking function and airtight silicone gasket Complies with safety standard BS EN 61010-2-010:2003 Maximum temperature 250°C Minimum temperature RT + 30°C Volume (litres) 28 Temperature homogeneity (°C) ±5.0 250°C Heat-up time (min) 23 Recovery Time (min) 3 Dimensions: Inside H x W x D (mm) 295 x 300 x 320 External dimensions H x W x D (mm) 440 x 590 x 465 Load per grid/total 10/20(kg) Air change per h 65 Max. power (W) 1000 Holding power ...

Carbolite Gero AX30 Heating Oven Original price 3385 € Heating cabinets of the Apex AX series are economy laboratory devices for temperatures up to 250°C. Digital PID Controller R38 Recirculating air fan for short heat-up times and excellent temperature homogeneity Stainless steel inner chamber Two height-adjustable, chrome-plated lattice shelves Door with locking function and airtight silicone gasket Complies with safety standard BS EN 61010-2-010:2003 Maximum temperature 250°C Minimum temperature RT + 30°C Volume (litres) 28 Temperature homogeneity (°C) ±5.0 250°C Heat-up time (min) 23 Recovery Time (min) 3 Dimensions: Inside H x W x D (mm) 295 x 300 x 320 External dimensions H x W x D (mm) 440 x 590 x 465 Load per grid/total 10/20(kg) Air change per h 65 Max. power (W) 918 Holding power (W) 342 Weight (kg) 24 Condition: new, without original packaging  ...

Three-roller calender Brand GECKO IRM Type 1550 x 110 Year 2022 1500 x 3 mm.

Gebhardt Belt conveyor system 5549-610-500 with pre-flow belt 900-610-500 RA1005 The belt conveyor system from Gebhardt is from 2007 and is in a very good (used) condition. It has an engine of the brand SEW. The system can be used in up-and-down operation. Inclination angles are adjustable as desired, upper arc and supports can be adjusted. Columns are not included in the scope of delivery. These are optionally available. Consisting of: 1 x pre-flowstrip, 1 x main band, 1 x sheet piece Technical data: Manufacturer: Gebhardt Type: 300.10 Position: GE 12.20 Built: 2007 Condition: very good (used) Engine: fully functional Length main band: 5549 mm (incl. top bow) Nominal/outer width (NB): 610mm Belt width (GB): 500 mm Webbing: slightly structured Length pre-flow belt: 900 mm Length of sheet: 613 mm Webbing: smooth Heights OK Strap: H 1 bottom + 650 mm H 2 top 2,300 mm Height differenc ...

GE Äkta Explorer FPLC 100 Air/General Electric/Cytiva -Box 900 -pH/C 900 monitor -UV 900 UV Detector -UV Flow Cell -P 900 Pump /100ml/min w. Switch Valves Air 900 Control Box -pH Sample -Conductivity Cell -INV 907 Injection V1 Sample Valve V5 Outlet Valve V4 Column Valve V2 Column Valve V 3 -P 960 -M 925 MIxer (2ml) on request 5 and 12 ml) FR 902 Restrictor CU-950 Interface Unicorn Software -Frac 950 Faction Collector warranty

Offer via gebr. overhauled pipe cutting and chamfering machine Fabr. Georg Fischer / Orbitalum Type RA8 Year of construction 2007 Specifications: Tube Outer Diameter 124-230mm (4" - 8") Wall thickness 1 - 10 mm Power supply 200 - 240 V / 50 Hz infinitely variable speed 150 - 270 rpm. Electronic speed levels 1 - 6 Power 1600 W incl. mounting plate, assembly table used, in good condition.

GE LM 2500 gas turbines 2 pcs available Power:24.000 Hp each Average working hours 1700 hours

Absolute encoder, incremental encoder with solid shaft -Manufacturer: Lenord Bauer -Type: GEL 260-VN00500A000 -Dimensions: 90/90/H120 mm -Weight: 0.62 kg

Siphon for wash basin, space-saving siphon -Number: 7x available -Price: per piece -Weight: 0.25 kg

brake drum -Bore: conical Ø 27 to 32 mm with keyway -Outer diameter: 220 mm -Inner diameter: 200 mm -Recess: Ø 67 mm -Number: 4 drums available Price: per piece -Weight: 6.5 kg/piece

Nicotra Gebhardt ZDS 20-0071 Pedestal Silencer Pedestal silencer for inlet side sound attenuation of roof fans Manufacturer: Nicotra Gebhardt Type: ZDS 20-0071 Pedestal silencer Flat roof plinth galvanized steel sheet More items - new and used - can be found in our shop! International shipping costs on request!.

GE/Amersham Äkta Pilot prep. FPLC; Software Unicorn 5.2, further information on request

pressure: 40 t distance between columns: 695 bzw. 215 mm stroke: 100 mm table surface area: 650 x 440 mm ram surface: 580 x 285 mm dayligth: 400 mm total power requirement: 15 kW weight of the machine ca.: t dimensions of machine L x W x H: 1,63 x 1,05 x 2,61 m - with die cushion - with light bareer make SICK The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Gebhardt roller curve conveyor 2 x 90° LINKS 610-500-300 with straight frame RA1210 The Gebhardt wheel curves with straight gear are from 2007 and are in a good (used) condition. It has a central engine of the SEW brand. Columns are not included in the scope of delivery. These are optionally available on request. Technical data: Manufacturer: Gebhardt Type: 1070.113 Built: 2007 Condition: good (used) Engine: fully functional Angle: 2 x 90° with straight frame Outer width: 610 mm Clamping length: 500 mm Length straight line: 300 mm Rolls Type: G6/50 sliding bearing with conical plastic Molding Power rating: 30 kg/m Engine Type: SEW Gear Motor Engine Power: kW 0.37/S1 Hz 50 A 2/1.15 Conveyor speed: 0.35 m/s Weight: 110 kg Scope of delivery: without supports (if necessary please enquiries) Price plus VAT from central warehouse Dr. Sonntag KG 97076 Würzburg Payment: after invoic ...

Baier Geba 9/A Hot Stamping Machine, 220/380 Volts, 10 Ampere, Embossing Presure: 4 Tons, Stamping Surface 150x230mm, With Motor Driven Foil Feeding Device

Cream Separator 8500 l/h to 10,000 litres per hour Make : Westfalia Model : MSE 85 -01-177 Y.o.m : 2008 Condition : Very Good Tools, Control panel, Manual Book , Base Plate Contact us to arrange a visit at our facilities in Derby

Spherical plain bearings, radial spherical plain bearings, ball bearings, for hydraulic cylinders -Condition: unused -Type: GE140UK-2RS -Number: 3x spherical bearings available -Price: per piece -Weight: 13 kg

Spherical plain bearings, radial spherical plain bearings, ball bearings, for hydraulic cylinders -Condition: unused -Type: GE160UK-2RS -Quantity: 1x spherical bearing available -Price: per piece -Weight: 19 kg

Hello everyone for sale are approx. 500 lfd. Meter Gemac shelving. 6 floors/field/depth 1,200 mm. We are also happy to do this in partial quantities. Shipping and assembly can be arranged!

Fire button, smoke vent button, push button, limit switch -24 VDC -Price: per piece -Quantity: 3 available -Weight: 0.6 kg/piece

Bending tool, die, upper blade, upper tool, upper jaw, claw bar -Tool for swivel bending machine -Pointed tool -Dimensions: 45 x 120 mm -Length: 800 mm -Weight: 19 kg

Terminal box, aluminum housing, housing systems, Klippon -Type: AB812027 -Size: 95/83/H35 mm -Price: per piece -Number: 4x available -Weight: 0.3 kg

Gebhardt roller conveyor turnout sorter switch diverter ejector 45° 2400-1300-550 RA1147 Type 356.10 year of construction 2007 perm. weight load: 30 kg/m dead weight: 40 kg/m roll width: 550 mm nominal/external width (NB): 610 mm push-off element: roller adjusted headroom: 680 mm conveying speed: 0,35 m/sec. Brake for dust operation on discharge track drive of discharge mechanism: electric dimensions of the conveyed material: l x w = 600 mm x 400 mm Optional: Adjusted height on your request Electrical attachments like light barriers, barcode sensors Control/Software Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: condition: very good (used) Construction year: 2007 nominal voltage: 230, 380-500V Conveying length in mm: 2400 Nominal / outside width in mm: 1300 Roll width in mm: 550 Roll division in mm: 100 Driven: YES Engine type: SE ...

Inv. Num. : 7366 Type: Hydracrop 70- SD Producer: GEKA Created: 1993 Parameters: Power consumption: 9 kW Impact neck: 500 mm Machine weight: 2400 kg Dimension: 1300 x 2100 x 1800 mm Equipment: 2 foot pedals

Angle for filter system, chip extraction, dust extraction, extraction system, ventilation ducts and fittings -Manufacturer: DEC, ventilation hose ovp -Type: Greydec 100 - 203mm x 6 meters -ART.code: DG1203/6 -Dimensions cardboard: 400/220/H220 mm -Weight: 3.1 kg

Angles for filter systems, chip extraction, dust extraction, extraction systems, ventilation ducts and fittings -Manufacturer: DEC, ventilation hose, original packaging -Type: Greydec 100 - 152mm x 6 meters -ART.code: DG1152/6 -Cardboard dimensions: 400/175/H175 mm -Weight: 1.7 kg

Valve block, control block, hydraulic control block, control unit, control valve -Manufacturer: GSL (German Standard Lift), control block for the drive of work platforms -Model code: Valves 4070... see photos -Dimensions: 340/300/H400 mm -Weight: 40 kg

Control unit, control element, interface, drive control, drive current control, high-performance pulse control, pulse control -Manufacturer: GSL (German Standard Lift), high-performance impulse control for driving work platforms -Type: 1204-406 -Voltage: 36-48 V -Dimensions: 195/145/H75 mm -Weight: 2 kg

Valve block, control block, hydraulic control block, control unit, control valve -Manufacturer: GSL (German Standard Lift), control block for the drive of work platforms -Model Code: Valves 4070... see photos -Dimensions: 340/300/H160 mm -Weight: 38 kg

Hydraulic oil tank, hydraulic oil reservoir, hydraulic tank -Manufacturer: GSL (German Standard Lift), hydraulic reservoir for the drive of work platforms -Additional parts: see photos -Dimensions: 300/295/H550 mm -Weight: 11.4 kg

Key data: 300 mm, 450 mm, 3800 1/min

Control OKUMA ... OSP-P300LA-e Turning diameter... 300mm Rotation length ... 450mm Inclined bed Spindle bore ... 68mm Tool changer... 12 Driven tools... 6 Bar feeder Axis X ... 235mm Axis Z ... 520mm Axis C ... 360° Machine weight ... 5000kg L x W x H ... 2545x1870x1791mm Main engine power ... 11/15kW Spindle speed ... 38-3800 rpm. The machine is in good condition, possible to test under electricity.

Hydraulic motor, oil motor, hydraulic pump -Hydraulic motor for driving work platforms from GSL (German Standard Lift) -Drive shaft: Ø 22 mm toothed -universally applicable -Number: 3x motors available -Price: per piece -Dimensions: 235/125 mm -Weight: 15 kg/piece

Shelf Shelving System Spare Parts Warehouse High Rack, Storage Rack, Industrial Rack Used Manufacturer: GEMAC Spare parts warehouse over 3 walk-in levels with floors, elevator and office space approx. 25000 sheet metal shelves each approx. 400 x 1100 mm Shelf load: 80 kg Load max: 500 kg Field width: approx. 1100 mm Depth: approx. 400 and 800 mm Shelf height approx. 1800 mm The plant is currently being dismantled

Rail wheel, flanged wheel, track roller, track wheel, wagon wheel -Roller: with angular groove, without bearing -wheel: Ø tot. 218mm -Groove width: 55 mm -Hub: Ø 45 x 52 mm -Number: 3x wheel available -Price per piece -Total dimensions: Ø218 x 87 mm -Weight: 9.9 kg/pc.

Bottle washing machine GERA type: Arcade year of manufacturing: 2010 working hours: 32767 capacity: approx. 33.000 bph by 1,0 ltr. bottles control range: 13.200 - 36.300 bph cell pitch: 110 mm bottle cells per row: 30 bottle cells complete: 7.860 with pre-soaking The machine is still in production in Germany and will be available in February 2025

Key data: 300 mm, 450 mm

Control OKUMA ... OSP-P300LA-e Turning diameter ... 300mm Rotation length... 450mm Inclined bed Spindle bore ... 68mm Driven tools 12 Axis X ... 235mm Axis Z ... 520mm Axis C ... 360° Machine weight... 5000kg L x W x H ... 2545x1870x1791mm Main engine power ... 11/15kW Bar feeder Spindle speed ... 38-3800 rpm The machine is in good condition, possible to test under electricity.

honing diameter: 40-420 mm stroke: 15-6500 mm centre height: 520 mm workpiece length: 6500 mm workpiece dia.: 1000 mm steady: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Display, display module, display panel -Manufacturer: Regloplas, display panel type RT45-Geh -Art. No.: 45750 -Dimensions: 130/100/H100 mm -Weight: 0.9 kg

honing diameter: 160 mm stroke: 3025 mm centre height: 325 mm workpiece length: 3000 mm workpiece dia.: 600 mm steady: spindle drive: 32-250 U/min stroke speed: 0-20 m/min total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Absolute encoder, encoder, encoder, encoder, absolute encoder, absolute encoder, function encoder, resolver, resolver, rotary pulse encoder, tacho generator -Manufacturer: Noris, rotary encoder tachogenerator -Type: GE121 -Speed: 1500 rpm -Dimensions of box: 210/115/H100 mm -Weight: 1.6 kg

Torque wrench, torque tool -Manufacturer: GEDORE, torque wrench type TORCOFIX -Z 80-400 Nm -Art.No.: 4440-01 -Torque: 80 - 400 Nm / 60 - 300 lbf-ft -Holder: pin holder Ø 16 mm -Transport dimensions: 755/70/H65 mm -Weight: 2.1 kg

Torque wrench, torque tool -Manufacturer: GEDORE, torque wrench type TORCOFIX -Z 40-200 Nm -Art.No.: 4420-01 -Torque: 40 - 200 Nm / 30 - 150 lbf-ft -Holder: pin holder Ø 16 mm -Transport dimensions: 560/60/H60 mm -Weight: 1.3 kg

Steel staircase, exterior staircase, extension staircase -Steel staircase: Add-on staircase with treads and railings on both sides -Width: 880 mm -Step spacing: approx. 200 mm -Dimension of top step: 1940 mm -Transport dimensions: 3880/880/H970 mm -Weight: 150 kg

Door closer, floor door closer, closing mechanism -Manufacturer: Geze, Pendulo C door closer, unused -Function: Swing door 90 DEGREE - only locks at 0 degrees - 90 DEGREE -Art.No.: 3000-002336 H06-14-00-00 -Number: 44 door closers available -Price: per piece -Dimensions: 315/45/H65 mm -Weight: 1.3 kg

Blown film line especially for PP processing length: 6,300 mm width: 2,500 mm height: 4,200 mm Weight: 3.700 kg blowing capacity: 65 kg/hod. Film Thicknes: 0.015 – 0.1mm film width: 250 – 650mm Die- diameter 65 mm Winding speed: 5 – 60m/min. Power consumption: 72 kW

Stamping pressure : 40 kN Stamping area : 150 x 210 mm Stamping die holding plate : with dove-tail guiding Stroke of plunger : 28 mm Daylight (adjustment of height) : 0-180 mm Throat (middle of stamping plate to bow) : 190 mm Foil feeding system : motor-driven, 1-fold running from the left to the right side with foil re-winding device Working table : sliding automatically in and out with table lock pneumatic, 400 mm x 450 mm PLC : Siemens S 7-1500 with TP 700 color Safety device : in CE-execution with safety light curtains in front Color of the machine : light grey RAL 7035 Voltage: 3 x 400 VAC (L1/L2/L3/N/PE), 50 Hz. Pneumatic access : oil and water free compressed air, 6bar

Door closer, floor door closer, locking body -Manufacturer: Geze, floor door closer closing body type TS 500 NV, unused Ovp -Article No.: 0672-CPR-0121 -Number: 11x door closers available -Price per piece -Dimensions: 300/90/H80 mm -Weight: 3 kg

We have on stock this new GEABock Compressors: HGX34/210-4ML CO2 T- For CO2 transcritical system - 2000Eur HGX 44e/665-4 - 1100Eur HGX 44e/565-4 - 1000Eur Price for negotiantions!

General Electric Äkta Valves and Pumps PV 908 INV 907 IV 908 P 960

Key data: 1100 mm, 2

Wide belt grinding machine Manufacturer: Böttcher & Gessner Model: 780 Grinding width 1100mm Aggregates 1x calibration roller 1 x Finishing touches 1 x Cleaning Brush