ge mi fu used for sale

Shell end mill, indexable insert mill, hedgehog mill, tool holder, milling holder, milling tool -Diameter: 40 mm -Working height: 35 mm -Recording: MK 4 -Weight: 1 kg

Micrometer screws -Measuring range: 225-250 mm -One rotation of the drum corresponds to: 0.5 mm -with locking device -Measuring force: Ratchet -Hand protection -Quantity: other sizes also available -Weight: 2.5 kg

Notching milling machine -automatic hydropneumatic milling feed -for milling cutters max.: Ø 250 mm

end mill, end mill, milling cutter -Outer diameter: 200/H60 mm -Teeth: 12 -Quantity: 1 available Price: per piece -Weight: 9 kg

end mill, end mill, milling cutter -Outer diameter: 125/H60 mm -Teeth: 8 -Weight: 3 kg

Tool holder, milling tool holder -Number: 7x SK50 recording -Inner diameter: 32 mm -Drill chucks: Surface clamping chucks, reducing sleeves, cutter heads, end mills, spindle tools -suitable for: tool changers -Sale: only complete set -Weight: 4.6 kg

Tool holder, milling tool holder -Number: 4x SK50 recording -Inner diameter: 12/16/20/25 mm -Drill chucks: Surface clamping chucks, reducing sleeves, cutter heads, end mills, spindle tools -suitable for: tool changers -Sale: only complete set -Weight: 15 kg

Milk pipe fittings, milk pipe nuts, stainless steel fittings -Size: DN 40 -Nuts: 15 -Screw connection: 30 Price: complete -Weight: 14 kg

Milk pipe fittings, milk pipe nuts, stainless steel fittings -9x Size: DN 65 -9x Size: DN 80 -5x Size: DN 100 -Screw connection: 23 Price: complete -Weight: 12 kg

Tool holder, milling tool holder -Recording: SK40 -Inner diameter: 25 mm -Drill chucks: Surface clamping chucks, reducing sleeves, cutter heads, end mills, spindle tools -suitable for: tool changers -Weight: 3.5 kg

Shell end mills, shell mills, milling cutters -Outer diameter: 50 mm -Height: 42 mm -Inner diameter: 22 mm -Teeth: 6 -Price: complete -Number: 5 pieces -Weight: 2.5 kg

Gear milling cutter, modular milling cutter, hob cutter, tooth form milling cutter, modular milling head, shell end mill, roller milling cutter, milling cutter, hob cutter, spline shaft hob cutter -1x milling cutter: Ø 52/170 mm -Diameter: 22 mm -Weight: 2 kg

end mill, end mill, milling cutter -Outer diameter: 50 mm -Height: 36 mm -Inner diameter: 22 mm -Teeth: 8 -Price/Sale: complete Quantity: 18 pieces -Weight: 5 kg

Wood milling inserts, knife inserts, form milling inserts -Blade width: 60 mm -Blade thickness: 2 mm -For milling cutters: Ø 180 mm -Price: complete -Weight: 0.8kg

Wood milling inserts, knife inserts, form milling inserts -Blade width: 39 mm -Blade thickness: 2 mm -Radius: 7.5mm -Price: complete -Weight: 0.8kg

Wood milling inserts, knife inserts, form milling inserts -Blade width: 40 mm -Blade thickness: 2 mm -Price: complete -Weight: 0.3kg

end mill, end mill, milling cutter -Outer diameter: 100 mm -Inner diameter: 40 mm -Teeth: 10 -Price: complete -Quantity: 3 pieces -Weight: 4 kg

end mill, end mill, milling cutter -Outer diameter: 80 mm -R: 4 -Teeth: 6 -Weight: 1.6 kg

Surface reference plates, roughness measures MASSI end milling machines TGL 4763 Rz 6.3 μm - Rz 80 μm in wooden box used, tested ! Dimensions: 345 x 125 x 35 mm

Counter holder, counter bearing, bearing block, pillow block, bearing for milling machine -Dovetail: 118 by 160 mm 32 mm high -Drawing with the photos -Number: 1x counter bearing available -Price: per piece -Dimensions: 340/95/H220 mm -Weight: 15.4 kg

Milling head PAGUS Outer Ø thread: 41.8 mm square 10 x 10 mm used, tested ! Dimensions: 250 x 200 x 400 mm

Table milling machine, table milling machine -Spindle: comes from a Lubimez bench milling machine -Table milling machine: with rigid spindle -Dimensions: 800/800/H400 mm -Weight: 95 kg

Counter holder, counter bearing, bearing block, pillow block, bearing for milling machine -Swallowtail: 75 by 110 mm 25 mm high -Drawing with the photos -Dimensions: 215/70/H200 mm -Weight: 10 kg

Slotted disks, window milling tools, indexable inserts, window construction tools -Slit disk milling tool for: wooden windows -ZUANI LOGIFIX -Socket: Ø 50 mm -Weight: 6.8 kg

Pneumatic unit FESTO PEV-1/4-B-0D 175250 HEL-D-MIDI 165080 FRM-H-D-MIDI 170688 Dimensions: 180 x 140 x 55 mm

Slotted disks, window milling tools, indexable inserts, window construction tools -Slit discs, milling tool for: wooden windows -ZUANI Super Compact Fix -left tool -Socket: Ø 50 mm -Weight: 14 kg

Pressure regulator FESTO LRS-D-7-I-MINI 194615 0.5 - 7 bar Dimensions: 150 x 65 x 70 mm

Double end tenoner, edge processing machine, scoring motor, chipper motor, electric motor, spindle motor, milling motor -Power: 6.3 kW 5800 rpm at 100 Hz -Voltage: 380 V -Acquisition shaft: Ø 40 mm -Tool: mm -Dimensions: 540/260/H150 mm -Weight: 43 kg

Mixer RUDOLF THEN FD 044 S 0.37 kW 1380 rpm 220 / 380 V IP 55 Dimensions: 770 x 230 x 200 mm

Agitator, Agitator DIETZ 80S / 4 Length of stirrer: 550 mm Diameter: Ø 110 mm Motor: 0.0.00 55 kW 1380 rpm 220 / 380 V IP 55 Dimensions: 900 x 250 x 230 mm

Digital Display for Vertical Milling Machines ACU-RITE MillMate Dimensions: 280 x 175 x 160 mm

Spiral mixer for 50 kg dough or other masses, ERKA, type: SR 35 -In good condition- - Reinforced spiral arm - 2 Time clocks - 2 speeds - Emergency stop - Stainless steel dust cover - Kneader runs with AUTOMATIC and also in manual mode - Boiler and spiral made of stainless steel and in very good condition (no signs of use) - New, long connection cable attached - Electronics in very good condition, everything has been checked Kettle: for 30 kg flour or 50 kg dough El. Connection: 50 Hz, 380 V, 3.0 kW, 6.9 A Engine speeds: 710 and 1,425 rpm. The machine is in very good condition and is ready for immediate use. Visits and test runs are possible.

Mixing device for adhesives SCA Schucker GmbH SD203 490 cm3 without control used, tested ! Dimensions: 650 x 650 x 1300 mm

Vacuum Mixer/Dryer/Inclined Bucket Mixer Manufacturer: Drais Type TR 50 EX protected with chopper The mixing plant was opened in November 2008 Renewed by the Lödige company. Material stainless steel 1.4571 / stainless steel 1.4571 Electr. Connected load Drive Vibrator 10.5 kW Adjustable, 31.5 – 380 rpm 1445/2905 rpm Product room printing Product room Temp. Product space Content Double coat Double Jacket Content With head capacitor, Double-acting mechanical seal -1/+6 bar 300 °C 56.5 liters 6 bar 7 litres With head capacitor, Double-acting mechanical seal Weight approx. 2000 kg Length x width x height approx. 2200 mm x 1620 mm x 2065 mm Machine is in good condition ! From plant extraction, pilot plant equipment Installation and operating instructions, as well as electrical diagram and drawings available.

Control Siemens Sinumerik 828D Speed [rpm] 12000 Travel X/Y/Z [mm] 900/460/520 Tool pick-up BT40 General: Control system Sinumerik 828D X/Y/Z travel 900/460/520 mm Speed 12,000 rpm Tool holder BT40 Spindle: Belt spindle technology Speed 12,000 rpm Power 18 kW Torque 117 Nm Rapid traverse X/Y/Z 36/36/30 m/min Tool holder BT40 Tool magazine: Technology Chain Magazine (ATC TYPE) Number of stations 30 pieces Work table: Clamping area 1050 x 460 mm Table load 600kg Equipment / Accessories: Chip disposal chip conveyor Coolant supply IKZ plant Setup operation Electronic handwheel Miscellaneous Rinsing gun

Sales Description ------------------- This large CNC axis drive spindle originates from a high-precision gantry-type milling machine and has been fully refurbished, including complete replacement of all bearings. With a total length of approximately 367 cm and a robust construction designed for heavy-duty machining, it is ideal for machine builders, retrofit projects, and industrial users seeking a reliable, ready-to-install spindle unit. The spindle is stored in our warehouse in Bavaria, Germany, and is available for immediate delivery. Transport organization can done by IBA - the costs to be paid by the customer. Further detail information are provided in the attached datasheet as PDF-File. -------------------------------------------------------------------- Sales description This large CNC final drive spindle comes from a high-precision gantry milling machi ...

Milling cutter, H, schl. Zahnst. Group milling cutter FETTE K HSS E ( KHSSE ) Module 0.8 EW 20° DIN 3972 BP I

End mills GEFRA u.a. HSS end mills 12 to 40 mm 43 pieces used, tested ! Dimensions: 400 x 200 x 100 mm

CNC machining centre HERMLE U 1000 T – universal milling machine For sale is a high-quality CNC universal machining center from the renowned manufacturer Hermle, model U 1000 T. The machine impresses with its stable design, high precision and versatile applications. Ideally suited for toolmaking, single part production and demanding milling work. General information: Machine Type: CNC Machining Center / Universal Milling Machine Manufacturer: Hermle Model: U 1000 T Year of Make: 1999 Control: Heidenhain TNC 426 Condition: Used, good general condition, functional Shipping time: Immediately available Technical data: Travel (X / Y / Z): approx. 1000 / 630 / 550 mm Table size: approx. 1200 × 630 mm Tool holder: SK 40 Spindle speed: up to approx. 7000 rpm Tool magazine: approx. 16 places Quill stroke: approx. 75 mm Milling head: swivel 0 – 90° (unive ...

EPSM / Biological Safety Station ESCO AIRSTREAM PLUS (AC2-5E8-TU) 1.5m New equipment in its original packaging Complete package including: PSM ESCO Airstrem plus class II AC2-5E8-TU with a length of 150cm (1.5m) A UV-30A UV lamp A fixed stand with levelling feet Height: 71cm SAL-5A0 GEN2 2 internal sockets TüV NORD EN 12469 certified model Automatic regulation and malfunction alarm and dry contact for alarm reporting Economical dual motors ensure permanent and stable flow control Removable stainless steel worktop, with a large work surface and inclined undermount for liquid retention LED lighting Control panel with clear flow display, glass position Quiet operation The PSM are equipped with 2 electrical outlets and a UV lamp Depth without armrest: 767 mm / with armrest: 823 mm Motorized front window, stops at working position External stainless steel arm rest on  ...

Thermo Scientific Multidrop 832 Microplate Dispenser The Multidrop 384 is an automatic, programmable eight-channel microplate dispenser. It features a peristaltic pump for fast, continuous dispensing of liquids into 96- and 384-well microplates. Microplate Dispenser 96 and 384 Precision, speed and reliability in distribution. Possibility of distribution by selecting the number of columns. External dimensions: 31x32x18 cm Weight: 7Kg Dispensing accuracy: 5 μL: ±3% (typical) 20 μL: ±2% (typical) 100 μL: ±1% (typical) Dispensing speed: 96-well plate: 20 μL in 5 seconds; 50 μL in 8 s 384-well plate: 20 μl in 20 s; 50 μl in 25 s Year of manufacture: 2005

SARTORIUS CENTRISART A-14C Refrigerated Laboratory Micro Centrifuge with A1C Rotor Tubes 1.5/2ml (1-14K SIGMA) Almost new equipment, used for a few days. Model: Micro A-14C CENTRISART / SIGMA 1-14K Manufacturer Number: A-14C-1EU Type: Refrigerated Benchtop Centrifuge for Microtube Dimensions: 28x52x24 cm Weight: 19kg Speed / Force: 15000 rpm RCF max with fixed angle rotor (g): 16602 Temperature range: -10°C and +40°C Fixed rotor reference A1C For 12 tubes of 1.5 / 2ml The A1C rotor is specially adapted to Vivaspin® 500 ultrafiltration concentrators, but it can also be operated with conventional 1.5 and 2 ml conical bottom tubes. Year of manufacture: 2016