ge mi fu used for sale

Collet holder, tool holder, tool holder, milling holder, milling tool, short-shaft system -Manufacturer: DEPO, milling mount SK50 -Type: 100 5 77 -Milling tool holder: conical, Ø 34/24 mm M16 -Dimension total Ø97x385mm -Weight: 5.9 kg

Collet holder, tool holder, tool holder, milling holder, milling tool -Milling holder: SK50 2 pieces -Type: different versions see photos -Milling tool holder: M16 -Price/delivery: complete -Total dimensions: 190/100/H260 mm -Total weight: 6.3 kg

Tool holder, milling holder, collet holder, milling tool, adapter, clamping unit, tool holder, -Manufacturer: Sandvik Coromant milling holder SK45 -Type: 390.140-45 50 027 -Dimension: O83 x 140 mm -Weight: 1.7 kg

Tool holder, milling holder, collet holder, collet chuck, chuck, milling tool, adapter, clamping unit, tool holder, -Manufacturer: Fahrion, milling chuck with accessories -Type: NCGFLK 160-AD+B45 -Number: 8x chuck available -Price per piece -Dimensions box: 270/195/H110 mm -Weight: 3.9 kg/pcs.

Tool holder, milling holder, collet holder, collet chuck, chuck, milling tool, adapter, clamping unit, tool holder, -Manufacturer: Fahrion, milling chuck with accessories -Type: NCGFLK 160-AD+B50 -Number: 8x chuck available -Price per piece -Dimensions box: 270/195/H110 mm -Weight: 4.9 kg/pcs.

Type Vacuum tumblers Height 2150 mm Width 2200 mm Length 1400 mm Capacity 600 l Power supply: 400V 50Hz 3N Total power 4.8 kW Main Material Stainless steel, acid-resistant Barrel Aeration Valve Yes, Solenoid Valve Cooling jacket tumbler Yes, refrigeration unit built into machine design Loading Loading integrated into the machine

Milling machine, universal milling machine, tool milling machine, two-spindle milling machine, milling machine -Milling machine: Two-spindle milling machine for small parts -Dimensions: see photos -Drive: 0.37 kW each -Coolant device -Dimensions: 1000/850/H1360 mm -Weight: 352 kg

Type Vacuum tumblers Height 2100 mm Width 1900 mm Length 1800 mm Weight 1100 kg Capacity 300 l Power supply: 400V 50Hz 3N Main Material Stainless steel, acid-resistant Barrel Aeration Valve Yes, Solenoid Valve Variable speed control of the tumbler Smooth adjustment of the barrel speed Cooling jacket tumbler Yes, refrigeration unit built into machine design Loading Loading integrated into the machine

Type of mixer Height 2050 mm Width 2300 mm Length 1200 mm Capacity 700 l Power supply: 400V 50Hz 3N Stirrer Type Spiral Agitators Product ejection Pneumatic flaps, front flaps Loading No loading, it is possible to buy a pillar loading for the machine Mixer Type Open Mixer Number of rollers Twin shaft

Granulator for heavy duty Make NETZSCH CONDUX Type CS 500/600-4 Inlet opening approx. 600x600 mm Semi-open 5-knife rotor, 4 stator blades Drive motor 75 kw

Type: VM 1500, capacity: 1500 liters, jacketed tank with agitator, cooling/heating capability, agitator power: 7.5 kW, Rietschle vacuum pump, capacity: 21m3/h, power 1.5 kW, Schema Hydraulik hydraulic pump, power: 1.5 kW, new touch control panel Mixer Indu IMAX 500. Can be connected to a through cutter.

Granulator for high loading (heavy duty) Make NETZSCH CONDUX Type CS 500/600-4 Inlet opening approx. 600x600 mm Semi-open 5-knife rotor, 4 stator blades Drive motor 75 kw

Type of mixer Height 1700 mm Width 1300 mm Length 3500 mm Capacity 2000 l Power supply: 400V 50Hz 3N Total power 18 kW Main Material Stainless steel, acid-resistant Agitator Type Vane Agitators Product ejection Pneumatic bottom flaps, product ejection from below Loading No loading, it is possible to buy a pillar loading for the machine Mixer Type Open Mixer Number of rollers Twin shaft

Used colloid mill made by Młynkol type KMH700. New 2005. Power - 11 kW. Rotation - 2900 rpm. Reported output 700-1000 kg/h. Weight - 185 kg.

Suitable for high throughputs of ground meat, hamburger, breakfast and dry sausage production as well as production of vegetables, fillings, etc. The two mixing shafts with separate motors are independently switchable forward and reverse, at high and low speed. As standard the mixing shafts are equipped with paddles, enabling a fast emptying. 2 x units in stock

Stock number: 3914 PROCESSING Manufacturer: FEELER, Type: FV 800A Machines NO.: VG806, Year of manufacture: 1999 Specifications: Table size 950x425 mm Large table load 500 kg Longitudinal movement (X) 800 mm Transverse movement (Y) 450 mm Vertical movement (Z) 505 mm Spindle Taper 40 ISO Spindle speeds 6000 rpm Total power 5.5 kW Tool changer 24 places Rapid traverse X/Y/Z 18/18/15 m/min Control Mitsubishi Meldas 500 Fabr. Controlled in axes 3 Accessories: Cooling water system. Machinery vise. Tool holders pcs Operating instructions Length: 3060mm, Height: 2735mm, Width: 2300mm, Weight: 4100Kg

Shell end milling cutters, shell milling cutters, milling cutters, shell milling cutters -Manufacturer: Garant, shell end mill shell end mill -Type: H 40Ø x 20 x 16 H C7 Sp.224mm -Intake: with fitting groove -Cutting material: HSS-Co5 -Dimension: Ø 40 x 20 x 16 mm -Weight: 0.1 kg

Shell end milling cutters, shell milling cutters, milling cutters, shell milling cutters -Manufacturer: Fette, shell end mill with longitudinal groove -Type: Fette 50 x 25 H Sp 588 -Intake: with fitting groove -Cutting material: HSS -Dimension: Ø 50 x 25 x 22 mm -Weight: 0.2 kg

Shell end milling cutters, shell milling cutters, milling cutters, shell milling cutters -Shell milling cutters: with longitudinal groove -Type: HSS 60x30x27 H -Intake: with fitting groove -Cutting material: HSS -Dimension: Ø 60 x 30 x 27 mm -Weight: 0.4 kg

Three-phase motor, electric motor -Manufacturer: VEM, electric motor type KMR 71 G 4-2 -Power: 0.55/0.7 kW -Speed: 1400/2840 rpm -Shaft: Ø 19 x 40 mm -Protection class: IP44 -Number: 1 piece available -Dimensions: 250/140/H180 mm -Weight: 11kg

Electric motor, three-phase motor -Manufacturer: ZSE MEZ, electric motor type 4AP90s-4 -Power: 1.1kW -Speed: 1410 rpm -Shaft: Ø 24 x 50 mm -Protection class: IP 44 -Dimensions: 290/175/H210 mm -Weight: 12.3 kg

Electric motor, three-phase motor -Manufacturer: IAEA, electric motor type MA 80-19F165 -4 -Power: 0.55kW -Speed: 1395 rpm -Shaft: Ø 19 x 40 mm -Type: B3/B5 -Dimensions: 280/200/H215 mm -Weight: 15.7 kg

Tool Milling Machine Cover FP3 2201 Travel XYZ: 500-300-380mm Spindle holder : ISO 40 S20x2 Spindle speeds: 40 to 2000 Universal table (or angle table) With active digital display on 3 axes Heidenhain TNC 113 Drill quill hor and vert Stepless feed and rapid traverse on all 3 axes Motor 3 Kw Built in 1979 220 Volt 3ph (with transformer 400-220V if necessary) The machine has been technically tested

Hydraulic unit, hydraulic pump, hydraulic pump, universal unit, gear pump, double hydraulic pump -Manufacturer: Orsta, double hydraulic pump -Pump 1: Type A 6.3 R -Pump 2: Type C 16-2 R -Motor: VEM KMR 112 M4 5.5 kW / 1440 rpm -Total dimensions: 725/250/H290 mm -Weight: 65 kg

Three-phase motor, electric motor -Manufacturer: VEM, electric motor type KR 112, 2/6./S -Power: 2.2kW -Speed: 940 rpm -Shaft: Ø 28 x 60 mm -Protection class: IP44 -Dimensions: 390/230/H255 mm -Weight: 41 kg

Milling machine Aciera F4 Travel XYZ: 400-175-450mm Spindle holder: ISO 30 Spindle speeds: 50-3400. Table size: 900x350mm. · Automatic feed on X and Z axis 10-600mm/min · Rapid traverse on both axes 1500mm/min . Drill quill · With some tools · Cleaned and maintained and now ready to use

• Stainless steel pharmaceutical version for mixing predominantly powdery materials and for granulating after the addition of binding agents • Gross capacity 122 litres, usable capacity approx. 37 - 100 litres • Mixing tool 1420/2840 rpm, 3.7/4.4 kW, drive with air gap seal • Chopper tool 1420/2890 rpm, 2.8/3.5 kW, double-blade, one-piece, drive with air gap seal • Container jacketed for heating/cooling (without separate heating/cooling unit) • Product temperature sensor • Blind flange for retrofitting a DIOSNA Mixing Probe • Lockable opening in the container lid for adding mixing components • Nozzle for adding liquid • Screw cap with degassing/venting filter • Pneumatic outlet, can be swivelled off for cleaning • HMI with IPC Lauer VS486 installed on mixer in control cabinet with pressurised enclosure protection class E Ex p (T4), manufactured by Gönnheimer, type ...

Electric motor, three-phase motor -Manufacturer: ATB, electric motor 80S 3327277-056 -Type: TAF 0.55/4-7 -Power: 0.185 KW -Speed: 1400 rpm -Shaft: Ø 20 x 60 mm -Type: B5 -Protection class: IP44 -Dimensions: 230/148/148mm -Weight: 8.1 kg

Milling Machine Lid FP1 Travel XYZ: 300x150x340mm Spindle holder: ISO 40 S20x2 Spindle speeds: 40-2000 Size of the tables: 600x260mm -Feed on X and Z axes -Vert quill with 60mm stroke -Angle table . Chip tray . With some tools . Is cleaned and maintained . Nice machine in good condition

Machine type: MIG/MAG welding machine Make Merkle Type ME 251 LK Appendix No. 7206 Connection voltage 3 x 400 volts Adjustment range 40 - 250 amps Duty cycle 35% ED at 250 amps 60% ED at 170 amps Current setting 8 switching levels Cooling transformer by built-in fan Cooling burner gas-cooled Design of mobile compact system Wire Feeder 2-Roller Drive Fuse 16 Ampere Dimensions L x W x H 815 x 440 x 680 mm Special accessories for point and interval equipment Weight 122 kg Age approx. 20 years Condition workshop tested, good incl. UVV test report Scope of supply welding system with the following accessories: 1 piece welding torch 3 mtr. long 1 piece ground cable 1 piece pressure reducer 1 roll of welding wire D-200 coil, 5 kg 1 can of non-stick spray 1 piece spare parts box, complete Adorned 1 pair of welding gloves 1 Pi ...

Machine Type: TIG Inverter Welding Machine Water-cooled DC system Make Merkle Type TIG Insquare 350 W-DC Appendix No. 24.410 Connection voltage 3 x 400 volts Adjustment range 5 – 350 amps Duty cycle 60% ED at 350 amps 100% ED at 270 amps Current adjustment infinitely variable max. weldable material thickness steel / stainless steel = 10 mm Cooling inverter through built-in fan Cooling burner water-cooled Design of mobile industrial plant Fuse 16 Ampere Dimensions L x W x H 955 x 515 x 945 mm incl. bottle holder Weight 130 kg Age approx. 30 years Condition workshop tested, good incl. UVV test report Scope of supply welding system with the following accessories: 1 piece TIG torch SR 18 SC, 8 mtr. long 1 piece ground cable 1 piece pressure reducer 1 pair of TIG gloves 1 piece spare parts box complete Equipped 1 Piece Instruc ...

SPECIFICATIONS: Max. machining length mm: 2500 Max. machining width mm: 350 01 - 02 Milling/grinding units per week 7.5 03 - 04 Milling/grinding units per week 4.0 08 Workpiece clamping presses Fast workpiece return

Universal CNC Milling Machine MAHO MH 600 E2 Travel X: 600 mm Travel Y: 400 mm Travel Z: 450 mm Numerical Command CNC PHILIPS 432 Cone SA40 Spindle speed: from 20 to 4000 RPM Table size: 900 x 480 mm TravelSpindle sleeve travel: 80 mm Year of construction: 1989 1 lubricant tank Voltage: 380 V Width: 2500 mm Depth: 2400 mm Total height: 2000 mm Weight: approx 3,5 T (We have a second machine for spare parts)

Universal CNC Milling Machine CNC MAHO MH 400 E Travel X: 400 mm Travel Y: 375 mm Travel Z: 250 mm Numerical Command CNC PHILIPS 432 Table: 700 x 270 mm Cone: SA40 Spindle speed: from 80 to 4000 RPM Year of construction: 1987 Central lubrication Manually swivel head Supplied with doc + machine parameters Voltage: 380 V Width: 2200 mm Depth: 2000 mm Total height: 2000 mm Weight: approx 1,5 T

Inline homogenizer Manufacturer: Ystral Type: Z 5.500 S/W3DGA-124P Machine No.: 208490703 Year of Manufacturing: 2003 Power: 5.5 kW very good condition mixing tools as good as new mounted on stainless steel frame LWH: 1050 x 600 x 560 mm

Inline homogenizer Manufacturer: Ystral Type: Z 5.500 S Machine No.: 200731001 Power: 5.5 kW very good condition Mixing tool as good as new mounted on stainless steel frame LBH: 1050 x 600 x 560 mm

Bead mill, agitator mill, shredder, crusher, grinder -Spare parts: 1x bead mill sieve, 1x bead mill screw, 1x bead mill wheel (see pictures) -Dimensions: 500/500/H165mm, 480/480/H175mm, 370/370/H70mm -Weight: 74 kg net complete

Powder disperser Manufacturer: Ytron Type: XC1/1/5.50-2 Machine No.: 03030247 very good condition with control cabinet and control system with hopper (diameter: 470 mm; height: 700 mm) on a mobile stainless steel frame LBH: 1050 x 500 x 1600 mm

Powder disperser Manufacturer: Pierre Guérin Type: F2116 Machine No.: 9914350 Year of Manufacturing: 1989 Power: 2.2 kW very good condition with hopper (diameter: 610 mm; height: 500 mm) on a mobile stainless steel frame with control panel with power plug LWH: 1000 x 550 x 1410 mm

Crankshaft milling machine GFM FKP-60 CNC Mfg. 1984. Very good condition. Very low working hours Max. work piece length: 6000mm Max. working length: 5800mm Center height (without retaining wedge): 2100mm Max. stroke of clamping head: 5800mm Max. stroke of longitudinal carriage: 5995mm Max. stroke of portal: -X axes (horizontal): 910mm (2x 442+13) mm Max. stroke of milling carriage -Y axes (vertical): 910mm (2x 442+13)mm Rapid Speed of longitudinal carriage: 3975mm/minute Rapid Speed of portal: 2982mm/minute Rapid Speed of milling carriage: 2982mm/minute Portal feeds:0...2000mm/minute Milling carriage feeds: 0...2000mm/minute Power: 200kW Cutting head diameter: 720mm Outer diameter of cutting head:1680mm Cutting head RPM: 41.5-48-54.4 Cutting speed: 95-110-125m/minute Cutting head diameter: 1050mm Outer diameter of cutting head:1680mm Cutting h ...

Counter holder, counter bearing, bearing block, pillow block bearing, bearing for milling machine -Abutment: for milling machines -Dovetail: 220 to 165 mm -Bore: Ø 85 mm -Dimensions: tech. Drawing with the photos -Dimensions: 400/145/H290 mm -Weight: 13.5 kg

Exterior mirrors, exterior mirrors, mirror housing mirror bracket -Manufacturer: Scania, mirror housing, mirror bracket repaired / prepared for painting -Type: 590657 -Dimension: 1640/640/H210 mm -Weight: 8 kg

spindle diameter 130 mm - ISO 50 tool - rated power of the spindle rotation motor 18.5 kW - installed power 4 0kW - spindle drive motor speed range 722-1455 rpm - spindle rotation range 2.25-900 rpm, 27 degrees - disc rotation range 2.25-180 rpm, 18 degrees - X axis feed speed range 0-5000 mm/min, stepless - Y axis feed speed range 0-5000 mm/min, stepless - Z axis feed speed range 0-3150 mm/min, stepless - B axis feed speed range 0-4000 mm/min, for Ø1m, steplessly Bg2Ltmk8Gq - machine weight 30 t

Height 1400 mm Width 800 mm Length 1850 mm Power supply: 400V 50Hz 3N Total power 17.5 kW Main Material Stainless steel, acid-resistant Loading No loading, it is possible to buy a pillar loading for the machine Throat diameter 160 mm Wolf type: Simple wolf Auger Stuffing Feeding System Hopper Throat Design: Stainless Steel

Probst & Class/ K 180 EL GLEN-GK/ 2017/18 Colloidal mill 2 available, price per piece For vegetable for example carrots used, sold as it is, where it is, price ex location

Dear Ladies and Gentlemen, the machine has not run much, it has been treated with care and is fully functional.

MIG/MAG hose package, MIG/MAG welding torch -MIG/MAG hose package: air-cooled -Length: 3.0 m -Weight: 3.0 kg

Hello Ms. Bader, for sale is a used, fully functional milling machine of the brand - Schaublin 53 incl. accessories.

Stock# U2435-1 Used stainless steel ribbon mixer made by Consumasz (Poland) type M-01 with total volume 1100 l and working volume 850 l. Mixing chamber has internal dimensions: L 1990 mm W 830 mm x D 1175 mm. Mixer is feeded from the top via cylindrical sifter type PC-400, driven by gearbox and el motor 4 kW, 1445 rpm, 220/380 V, 50 hz, or directly through inlet 205 mm x 205 mm. Mixer has single shaft equipped with welded double ribbons. Shaft is driven via gearbox and el motor 15 kW, 1460 rpm, 380 V, 50 hz. Gearbox reduction i= 36,9. Working rotation of shaft up to 39 rpm. Mixer has side wall inspection manway with dimensions 540 mm x 365 mm, and bolted stainless steel lid. Central bottom discharge outlet has diameter 200 mm and is equipped with manually operated valve. Product is droped into the hopper of discharge screw conveyor with screw diameter 200 mm and working length 1000 m ...

Herbold Fine Mill PU 500 Suitable for fine grinding of plastics and soft to medium-hard materials Drive power 55 kW Grinding disc diameter 500 mm Throughput capacity approx. 200-800 kg/h depending on material and fineness