ge jenbacher used for sale

taper MK: MK5 round table: ja weight of the machine ca.: 1.200 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Juice Pasteurizer Gebhardt EHA45 Electrically Heated 450 l/h Never Installed This Gebhardt juice pasteurizer is specifically designed for fruit juice production in small firms or gardening and horticultural associations. It can handle also juices with pulp and even tomato juices. This Gebhardt EHA45 pasteuriser is equipped with coaxial spiral heat exchanger and hot water circulating pump. The juice tube of a smaller diameter is located inside a larger hot water pipe. Hot water and pasteurised juice move in the opposite direction of each other, ensuring that the juice is warmed evenly. The power of the pasteuriser is step-by-step adjustable according to the number of operating heaters. The thermostat keeps the hot water temperature at a desired level selected by the user, which should be 4-5 degrees warmer than the temperature of the juice that comes out. The juice temperature is ad ...

completely stainless steel suitable thermo-oil heated (300 kW) 12 kW Frying length 7,500 mm Track width 600 mm Top band infinitely variable speed Oil pump Oil level control Suitable for fire protection Filter Dirt transport Lid mechanical lifting device insulated lid Dimensions (L x W x H) : ± 10,900 x 2,000 x 3,500 mm Siemens PLC control type S5 95U+ HMI Simatic OP27 suitable for CIP cleaning + Oil Management System Type VTC 2000 single-walled tank Oil pump Dimensions (L x W x H) : ± 1,700 x 1,1600 x 3,400 mm Oil level indicator

Multivalent steam boiler system 2 x 10 MW, AS NEW For dusty fuels or natural gas H. 2 identical lines: Single-flame tube boiler with economiser Fuel so far: lignite dust Calorific value Hu: 22,190 kJ/kg Ash content: 3.0 % – 3.5 % Rated thermal input: 19.5 MW FWL (2 x 9.75 MW FWL) Steam output: approx. 24 t saturated steam, 20 bar ü depending on the extent of condensate recirculation Preset also for natural gas operation H Calorific value HS: 11.4 kJ/Nm³ (calorific value Hi 10.4 kJ/Nm³) Rated thermal input: 19.5 MW (2 x 9.75 MW FWL) Steam output: approx. 24 t saturated steam, 20 bar ü depending on the extent of condensate recirculation The change of the burner operation is carried out by changing a fitting piece on the burner. Boiler 1 and boiler 2 can be fired at the same time with different fuels. If desired, the contents of both fuel silos can also be b ...

GER RHC-600 grinding machine in very good condition, perfect and periodic operation (350-400mm grinding wheel)

Used Gea centrifuge model ASE-20. Year of manufacturing 2019. Allowable rated rotational speed of the drum min-1 1200 (FU:60HZ) Allowable feed material density kg/dm3 1 max. Allowable heavy liquid density kg/dm3 1 max. Allowable solid phase density kg/dm3 1.4 max. Allowable throughput m3/h 400/1.5 min./max Allowable feed temperature ºC /95 min./max Allowable housing pressure range bar (g) -/0.04 min./max Drum filling volume l 3.6 approx. Allowable vibration speed mm/s RMS 7 max. Measuring point on the stand Ambient temperature °C 10/45 min./max plate clamping pressure bar (g) 82-112 CIP possible - yes CIP flow rate l/h -/1800 min./max Sound power level dB (A) 80 DIN EN ISO 3746 Sound power level mW 2.94 DIN EN ISO 3746 Lubricating oil quantity l 2.25 approx. Construction type IMV1 Power kW 11 (FU:7.5KW) Voltage V 400 Frequency Hz 50 Type of protection IP55 Inv ...

Hydraulic Gripper

Gebhardt RLM 56-8090 centrifugal fan with direct drive Direct drive in accuracy class 1: The RLM series Gebhardt remains true to its concept and can thus set accents in the field of free-wheeling wheels This makes the free-running wheel an integral strategic component of Gebhardt's "direct-drive fans" fan range - Aerodynamically and acoustically optimized - Pressure increase of 2000 Pa achievable in the optimum range - Optimum motor utilization due to adapted impeller strength - Short overall length, compact module - Low wheel weight and resulting low load on the engine mounts - Precise volume flow measuring device standard Specifications RLM intravent RLM 56-8090-4D-28HA1A Centrifugal fan with direct drive 905 mm impeller diameter free-running wheel one-sided suction 6 Number of scoops 8.4 kgm² moment of inertia 74.0 kg Mass Impeller 1.20 kg/m³ ...

USED PRECISION GEARS LTD TR-100 BLISTER BACKAGING MACHINE REF.: E0034 PRECISION GEARS LTD blistering machine to blister tablets, capsules, dragees, etc. For PVC / Aluminum blister Model TR-100 Year 2000 Batch marker for incision, pre-cut, cut, Production of 50/60 strokes per minute, depending on the selected blister size, up to 240 blisters per minute. Maximum format size 190x130 mm. Current format blister of 10 capsules of 170x 100 mm General characteristics: Manufactured by PRECISION GEARS LTD Model TR-100 Year built 2000

Condenser KUBA Number of fans: 3 x 900 mm Dimensions: 5750 x 1250 x 1750 mm Entry / exit diameter: 42/42 mm Pieces in stock: 1 Stock number: SK 64 Condition: Used Price on request, We have many other kealte plants and meat and fish processing machines : Bitzer,Copeland,Frascold,Lunite,Kueba,Guentner,Eco,Alfa-Laval,Goedhart ,Helpman

Cooler CUBA Type: SGBE 56-F82 Cooling capacity: 32.8 kW at DT8, 26.2 at DT 7 Surface: 193 m2 Air flow: 14 600 m3/h Fin spinning: 7 mm Electrical heating Fans: 2 x 560 mm Dimensions: 2700 mm x 900 mm x 1000 mm Refrigerant: Freon Volume: 44.7 l Pieces in stock: 3 Reference number: CH221 Condition: Used in good condition Price on request, We have many other Kealteanlagen : Bitzer,Copeland,Frascold,Lunite,Kueba,Guentner,Eco,Alfa-Laval,Goedhart ,Helpman

High temperature debinding furnace, make GERO type: HBO 50/13-3 2G heating: electrical useable space: ø400 x 400 mm temperature: max. 1.300°C ventilation: exhaust fan during the cooling phase and activated cooling fan ultimate vacuum: 10 mbar exhaustion time: ca. 5 min nitrogen: inlet pressure min. 3 bar oxygen: inlet pressure min. 3 bar

High temperature furnace, make GERO type: ULO 40/10- 2G heating: electrical useable space: ø400 x 600 mm temperature: max. 1.000°C room conditions: ventilation / exhaustion voltage: 400V connected load: 25 kVA control: MODCON with Modvis 2000

Honing diameter maximum: 0 mm Honing diameter minimum: 0 mm Stroke length: 0 mm Number of honing heads: 0   CNC Brand: 0 CNC Model: 0 Technical data Min. diameter: 25 mm Max. diameter: 90 mm Max. honing length: 250 mm Number of spindles: 1 Voltage 50 Hz 3x: 380 Volt Overall dimensions machine: Length: 1400 mm Width: 1200 mm Height: 2600 mm

Grinding length: 0 mm Grinding width: 0 mm Grinding height: 0 mm Wheel diameter: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Table length: 400 mm Table width: 200 mm Table load max.: 150 kg Execution: hydraulic Max. distance from table to spindle-centreline: 415 mm Longitudinal travel (X-axis): 420 mm Transversal travel (y axis): 192 mm Table speeds: stepless from: 2 m/min up to: 28 m/min Automatic vertical feed: Vertical rapid traverse: 0.18 m/min Diameter of grinding wheel: 225 mm Width of the grinding wheel: 25 mm Wheel int. diameter: 51 mm Grinding wheel speeds: from: 2800 rpm Voltage 50 Hz 3x: 400 Volt Grinding spindle motor: 2.2 kW Total power required: 6.1 HP Machine´s weight about: 1050 kg Overall dimensions machine: Length: 1800 mm Width: 1200 mm Height: 2250 mm Dimensions electric cabinet: Length: 800 mm Width: 300 mm Height: 1450 mm Various accessories: Electrical mag ...

GEA type 200023512 Intercooler Ladeluftkühler MTU Einwandfreier Zustand perfect condition from an MTU4000 engine that has been running for 25,000 hours von einem MTU4000-Motor, der seit 25000h in Betrieb ist

Offer via gebr. Pipe cutting and chamfering machine Fabr. GF Type GF20 AVM with lifting table Specifications: Pipe outer diameter 283-508mm Wall thickness 1 - 15mm Power supply 200 - 240 V / 50 Hz infinitely variable speed 50 - 163 rpm. Speed levels electronic 1 - 6 Power 1800 W

Table size : 1700mm x 400mm Magnetic chuck : 1000mm x 350mm X : 1500mm Y : 700mm Z : 550mm

Offer via Gebr. Tube cutting machine Fabr. GF GEORG FISCHER Type RA12 Specifications: Pipe outer diameter 215-325mm Wall thickness 1 - 10 mm Power supply 200 - 240 V / 50 Hz infinitely variable speed Speed levels electronic 1 - 6 Power 1600 W used, in good condition.

Year of manufacture: 1994 Power: 100 Tons Punching capacity: ø 50 x 15 mm Max punching ø: 90 mm 3 punching heads Gooseneck depth: 750 mm CNC table: 1500 x 750mm Tools User Manual

Table size: 1000x700 Travel spindle: 600 mm Precision guaranteed: 5 μm Spindle motor: 7.5 hp. Digital display on all axes: SONY LA10.

Indoor device, High: 1800 mm, Long: 1500 mm, Width: 2450 mm, Weight: 4.000 kg, Ø tool: 300 mm, Total power: 7kW, Height of points: 150 mm, Distance between points: 600 mm, Width of the grinding wheel: 40 mm, Specification: universal

all stainless steel hopper capacity 270L die width 400 mm usable die surface 370 x 130 mm maximum volume per stroke ± 1,47 kg maximum 50 strokes / minute total power 8 kW air consumption ± 300 L / min. mobile with mould trolley variable speed 3x400v 50hz with bridge breaker dimensions (l x w x h) : ± 3.140 x 1.900 x 2.570 mm weight 1200 kg PLC control

all stainless steel belt width 600 mm to form meat balls from 6 to ± 80 gr suitable to put in line with a forming machine (VM 400) adjustable speed mobile dimensions (l x w x h) : ± 1.300 x 700 x 1.500 mm

Punching section equipped with CNC stop table with 3-fold punching head Rear equipped with NC push-on roller conveyor for the cutting section with feed belt Complete machine in very good condition, selling due to staff shortage

Technical data Execution: Single polishing machine Speeds: from: 1300 / 2600 rpm up to: 4000 rpm Voltage 50 Hz 3x: 380 Volt Power: 1 kW Machine´s weight about: 50 kg Overall dimensions machine: Length: 800 mm Width: 400 mm Height: 1200 mm Various accessories: Cast-iron base

BUFFER SILO 15.000 lt. (or 8.000 - 12.000 - or bespoke), barrel Ø 2,2 mt. - height 3.0 mt., overall height 5,23 mt, made in electro-welded carbon steel sheet, sturdy supporting structure, internal rotor with spiral and agitator arms, inspection hatch on barrel wirh safety devices, bonfiglioli gearbox, power 3 kw electric motor, transmission with elastic coupling, finish painted externally with rustproofing and enamel, CE compliance + instruction manual, installed power : 3

Key data: 870 mm, 3000 mm, 500 1/min

Stock number: 3861 CNC LATHE Manufacturer: GEMINIS , Type: CNC 5 870 - 3000 Machine NO.: 5852, Year of manufacture: 1996 Specifications: Max. circulation diameter 870 mm dia. Turning length 3000 mm Turning over paddling slide 560 mm dia. Main spindle speed range 40-500 rpm Spindle bore 300 mm dia. Tool turret with 8 stations Total power 47 kW Control Siemens 840C Fabr. Accessories: Chuck Main Spindle SMW BB-630-325 Hollow Air Chuck mm dia Lining Rear SMW BB-630-325 Hollow Air Chuck mm Chip conveying. Tailstock Length: 6000 mm, Height: 2000 mm, Width: 2500 mm, Weight: 7000 kg

Manufacturer GEMINIS Model GHT-4 720 x 3000 Year 2004 CNC FAGOR 8055 TC/B Capacities and feeds Max. swing over bed 720 mm. Max. swing over cross slide 470 mm. Height of centres from flat guide 366 mm. Distance between centres 3.000 mm. C Axis and driven tools INCLUDED Fast feedrate X/Z axis 8.000 mm/min Work feedrate X/Z axis 8.000 mm/min Headstock Main spindle bore diameter 92 mm. Main spindle nose DIN-55027-11 Spindle diameter on front bearing 150 mm. Spindle speed 0-1600 Spindle automatic ranges 2 Main spindle power 17 / 20,5 kW Spindle torque 1590 / 1920 Nm Tailstock Ø Tailstock Quill 100 mm Tailstock travel 200 mm Taper Morse 6 Bed Width 430 mm. Height up to flat guide 775 mm. Turret Turret type Sauter VCI50 Ø400 mm. Driven tool position at turret 8 Driven tool power 5.5 kW Additional equipment 3 jaw auto-centering chuck SHW Autoblock 315 BH  ...

Grinding diameter: 230 mm Grinding length: 450 mm Workpiece weight: 0 kg MACH-id   3531 MAKE  GER Spain TYPE  RHL 450 YEAR  80 er SPECIFICATIONS Cylindical / Surface / Other  Cylindrical Grinding diameter Ø  230 mm Grinding length  450 mm Grinding wheel size  350 x 50 x 127 mm kW power on spindle  3 kW Spindle speeds / ranges   2600 Rpm DIMENSIONS Length  2600 mm Width  1600 mm Height   2000 mm Ger Cylindrical grinder for sale, the type is RHL 450.  

Center height: 430 mm Center distance: 2000 mm Spindle bore: 82 mm MAKE    Geminis Spain TYPE   GE 870 YEAR   80 er SPECIFICATIONS Swing over bed Ø  870 mm ControlConventionel  Swing over cross slide  530 mm Swing in the gap Ø  1100 mm Distance between centres   2000 mm Spindle bore  82 mm Spindle speeds / ranges   12350 Rpm Bed width  550 mm Power  15 Kw DIMENSIONS Length  3500 mm Width  1700 mm Height   1800 mm

Turning diameter: 1200 mm Turning length: 5000 mm Turret positions: 0 CNC Brand: NUM CNC Model: 760 MACH-id    3413 MAKE    Geminis TYPE   CNC 1.200 YEAR   90´s SPECIFICATIONS   Swing over bed Ø  1.200 mm Control  NUM 760 Distance between centres   5.000 mm Spindle speeds / ranges   710 Rpm Bed width   1.150 mm Power   55 Kw Geminis CNC lathe  

Magnetic chuck diameter: 0 mm Grinding height: 530 mm Grinding wheel diameter: 0 mm SPECIFICATIONS Controll   ConventioneL Vario Cylindical / Surface / Other    Surface grinder X - Travel   1000 mm Y - Travel   500 mm Z - Travel   530 mm Electro magnetic table   1000 x 500 mm Work piece weight    1500 Kg DIMENSIONS Length   4000 mm Width   2300 mm Height   2450 mm  

Geka Hydracrop 110/SD punching machine Selling due to need for space Ask us for anything

FlowCook completely stainless steel suitable for thermo-oil heating Belt length ± 13,000 mm Track width ± 600 mm Executing belt Belt washing system electric lifting device for the cap Total dimensions (L x W x H) : ± 15,000 x 2,200 x 3,000 mm

Used machine in good condition. Available for immediate delivery. - Pressure force: 120 t - Bending length: 3.050 mm - Axes: 4

Stroke length: 600 mm Honing diameter range: 3 - 90 mm Spindle drive: Servomotor RPM, max: 4500 1/min Torque: 60 Nm Stroke drive: Ball screw Stroke speed, max: 40 m/min Stroke acceleration, max: 25 m/s? Gehring precision honing spindle, 6 stations round table, Gehring digital honing control, incl. fault diagnosis, with free programmable controller Siemens S7-300. Spindle feed EMZ-F,

The cable pelletizer system comes from the Turkish machine manufacturer GEM and has a processing capacity of up to 1,000 kg of old cable / hour. The machine has the following components: 1.Conveyor belt to shredder: 2.2 KWA motor power / 5.5m long 2. Shredder: CE certificate: TS 1000 / pressure 100 bar / 75 kWA /145HP engine power / capacity: 800 – 1200 KG / hour 3. Conveyor belt from the shredder: 2.2 kWA motor power / length 6 m 4. Spiral bunker and spiral conveyor: 3.0 kWA motor power / length 3.5 m 5. Hopper to granulator: 3.0 kWA motor power / length 5.2 m 6. Granulator: CE certificate: TR 1000 - 5 / 110 kWA motor power / capacity: 800 – 1200 KG / hour 7. Screw fan: 11 kWA motor power / number of revolutions: 3000/minute 8. Helix Silo: 1.5 kWA motor power 9. Separator plastic of copper: 0.55 x 2 kWA motor power 10. Magnet separator: 0.55 kWA motor power 11. Filter s ...

Perfect condiction

ISDN PBX 2 external basic connections, 4 trunk lines, up to 8 ISDN terminals can be connected to the internal So-Bus. In addition, 8 analog ports are available.

Schnitzel plug completely stainless steel Track width 600 mm infinitely variable speed 0.60 kW Dimensions (L x W x H) : ± 1,900 x 1,000 x 1,500 mm Mobile

Cooking length 4,000 mm Track width 600 mm completely stainless steel steam-heated with electric lifting device Temperature distribution in 2 zones Dimensions (L x W x H) : ± 5,000 x 1,550 x 2,200 mm infinitely variable speed

With a width of 1.8 meters, the Gerber Paragon VX is a state-of-the-art cutting solution specifically designed for the industrial production of medium-sized materials. Here are some typical features and descriptions that might apply to this variant of the Gerber Paragon VX: Medium format: With a width of 1.8 meters, the Gerber Paragon VX is ideal for processing medium-sized rolls of material and producing medium-sized to large-format designs. This makes it ideal for the production of promotional materials, clothing, technical textiles and other medium-sized products. High Precision: The Gerber Paragon VX offers outstanding cutting precision, ensuring high accuracy even with complex designs and fine details. This allows the production of high-quality products with a professional finish. Automation and efficiency: With advanced automation features, the Gerber Paragon VX optimizes  ...

With a width of 2.2 meters, the Paragon VX Gerber Cutter is a high-performance cutting solution specifically designed for machining wide materials. Here are some typical features and descriptions: Large-format cutting: With a width of 2.2 meters, the Paragon VX Gerbercutter offers the ability to process large rolls of material and cut large-format designs with precision. This makes it ideal for the production of large-format advertising banners, flags, tarpaulins and other wide materials. High production capacity: By processing wide rolls of material and cutting speed, the Paragon VX enables efficient production of large quantities of materials in a short time, which can increase productivity. Advanced Automation: The Paragon VX Gerber Cutter offers advanced automation features that streamline the cutting process and minimize human intervention, increasing efficiency and mini ...

Used Gea Ahlborn VT 20 Locin flow pateuriser. Capacity 70 hL/h, full control panel, 16 Bar, 100 C. Lenght 330 cm, width 230 cm, weight 3000 kg. New 1991 r. CIP, equalizing tank. The largest product feeding pump according to my estimation, has a capacity of 50 000 liters / h (feed 2 ½ inch and 2-inch outlet) The pump does not have a nameplate. Its engine has an attached plate: 11-12,6 kW motor and connections that I mentioned above helped me specify the parameters of the pump. The pump is however stifled by giving large pressure and lower productivity. Supply systems for the beer and from there on to the pasteurizer have a diameter of DN40. The second pump section supports pasteurization (between the heat exchanger and a heating section in a large plate heat exchanger) is pump Fristam FP 722/145 A with an engine power of 1.5 kW. It should have a capacity of approx. 15 ...

Capacity: 2800 Watt volume: 100 L filter: HEPA : 230 mbar material: INOX Edelstahl Behälter : 5000 mm hose diam.: 32 mm : 5000 mm noise: 82 dB dimensions: LxBxH 50 x 50 x 135 cm weight: 35 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This Geminis GHT 11 G4 2200x8000 Lathe was manufactured in the year 2010. It is equipped with a Fagor 8070 control unit and has 2 axis. The machine has a spindle bore of 162 mm, it includes a steady rest, chip extractor, electronic handwheel, machine leveling supports, and various turret tool holders as additional equipment.

Rapid radial drilling machine make GENKO type ATB 30 SYear 1972Drilling capacity i. ST 60:25 mmDrilling assets i. ST 60:32 mmSpindle mount MK 3Quill stroke 150 mmDistance spindle / base smallest/biggest 620 / 1800 mmRadial arm adjustable vert. 1180 mmMovement horizontally on carriage mot.: 1900 mmMovement of the boom hor. 600 mmBoom rotatable by 360 °Spindle head tiltable on both sides up to 45 °14 spindle speeds 22 - 1920 rpm.3 aut. Feeds 0.1; 0.2; 0.3 mm / rev.Drive power 1.5 kWWeight approx 1.5 tExternal dimensions approx 3350 x 700 x 2800 mmWith- aut. feed- hydr. central locking- Tapping device- motor stroke movement- central hydr. clamping- motorized travel = 1900 mm on base carriageused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be ple ...