ge jenbacher used for sale

Hello, We hereby offer you a used hand plate sheet metal snips, Bernardo, type HLS 1050 x 2.0. Manufacturer Bernardo, PWA Handels ges. m.b.H. Type HLS 1050 x 2.0 Year of construction 05/2023 Machine No. PWA-230114 Cutting length 1050 mm Max. sheet thickness (steel 400 N/mm²) 2.0 mm Backgauge adjustment 0 to 600 mm Table stop adjustment 95 to 450 mm Table size 1300 x 600 mm Working height approx. 765 mm Machine dimensions 2000 x 1040 x 1600 mm Transport dimensions 1900 x 1050 x 1120 mm Machine weight 500 kg Optional accessories included: Back gauge 600 mm Hold-down device with quick clamp Note: The aforementioned technical data have been taken from brochures of the manufacturer or other sources, for which we cannot guarantee the accuracy and completeness. Scope of delivery: 1 piece used hand panel sheet metal shears Bernardo, type HLS 1050 x 2.0 Area ...

GEA Homogeniser Last used in 2020 Full asset list and spares available upon request

General SKU223Y097 MakeGericke / Azo Magento base g_extra_specificationsWith hopper and control cabinet (frequency inverter inside). Main Features MaterialStainless steel Motor0.21 KW Inlet diameter160 mm Specified Features - Metering screw MaterialStainless steel 1.4301 (304) Metering screws Metering screwcheck Screw diameter2x 25 mm Screw length350 mm With hoppercheck Hopper sizes800 x 800 x 500 mm Inlet160 x 160 mm Outletø 90 mm With motor0,12 kW (400 V, 1300 rpm) Screw speed53 rpm With breaking/mixing shaftcheck Motor0,09 kW (400 V 1300/17 rpm) Information Mounted on framecheck LocationBarneveld With switchgearcheck (as is) Floorspace0,80 x 0,80 m Total height1,25 m Weight120 kg CEcheckMetering screwsGerickeDosing units > Metering screwsBrand > Gericke What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to  ...

Single cylinder punching machine equipped with three separate working stations for different tasks: punching, shearing flat bars, and cutting angles. Punching capacity: 36t. Diameter 28 mm in 10 mm thickness. Flat bar shearing: 350 x 6 mm. 200 x 13 mm. Angle cutting at 90: 80 x 80 x 8 mm. Angle cutting at 45: 50x50x6mm.

Manufacturer: GEW Model: E2C Machine Type : UV Curing System Technical Specifications - Power output: 140 W/cm - Number of lamp housings: 9 - HMI control stations: 10 - Maximum lamp life: 2500 hours per lamp - Cooling: fully air-cooled, no water installation required - Condition: as new Find more here - / Contact us at -

Type: OptiFlour 600 II Serial number: 2215 Year of construction: 2013 Belt width: 600 mm Power: 3 x 400V, 50Hz, 5.3kW Dimensions: 2750 x 1650 x 2300 mm Weight: 1025 kg GEA OptiAir cyclone Type: OPA Serial number: 515 Year of constuction: 2011 Power: 3 x 400V, 50Hz, 4kW Dimensions: 1350 x 950 x 1800 mm Weight: 450 kg

cutting diameter: 255 mm dimensions of saw-band: 2750 x 27 x 0,9 mm cutting width: 200 x 320 mm cutting speed: 20 bis 80 m/min : 125 mm : 125 x 125 mm : 195 mm Impact energy: 350 mm connected load frequency: 400 Volt total power requirement: 1,5 kW weight of the machine ca.: 290 Kg dimensions: 1,1 x 0,8 x 1,75 m Double miter band saw -Miter cuts up to 60° left and 45° right -Vice with quick clamping device -Band tension control -Electr. Automatic cooling The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Fiber laser cutting machine Type: Laser Genius Fiber Manufacturer: Prima Power Year: 2017 Machine hours: 22151 Working area: 4000 x 2000 mm Resonator power: 6000 W Cutting table load capacity: 1850 kg Positioning accuracy of X and Y axes: 0.03 mm Installed power: 56.3 kW Minimum air inlet pressure: 7 bar Compressed air consumption (laser + suction): 30 Nm3/hour Maximum sheet thicknesses: structural steel: 25/20 mm stainless steel: 20/12 mm aluminum alloy: 20/6 mm brass: 10/10 mm copper: 10/8 mm Machine in good condition, under power Find more here - / Contact us at -

Equipment: Overpressure, Vacuum,Manufacturer: Gebr. Schmeck Siegen,Condition: used,Volume: 50,000,Vacuum: 1.0,Max. overpressure: 3.2,Max. permissible Operating temperature : 200,Shelves: clapper bottom,Design: upright,Stand shape: feet,Number of feet: 4,Diameter inside: 3,600,Cylindrical height: 4,050,Total height: 6,000,Manhole / dome: in the cylinder, in the top floor,Type plate: Yes,Equipment: Crane eyelets,Outlet: Flange DN100,Remarks: Steel feet cut off below the mounting flange (see pictures) Inside with reinforcement rings (see pictures),Last use: Chemical,Material in contact with the product: V4A

Silo system for granules or pellets up to 1000 kg/m3 Loading by bucket elevator Distribution with conveyor corners Discharge organs oscillomats Truck can be driven under Plant was only in operation for a short time

We supply and install our own, new, digital PLC controllers suitable for storage lifts and paternosters of all manufacturers on the market (e.g. Kardex, Hänel, Megamat, Electrolux Constructor, Zambelli, Intertex, Lista and many more). Our LTG StoreControl LL (storage lifts) and LTG StoreControl P-Touch (paternoster) control systems thus offer replacements for controls for which all spare parts are otherwise no longer available. With our controls, it is easy to connect your dynamic warehouse systems to higher-level warehouse management systems or to implement access restrictions.

SINGLE SCREW WASHING TANK, dimensions about 800 x 2.500 mm, simple washing/rinsing system for plastics, including:, hopper and screw conveyor to fill the buffer silo, buffer silo for regrinds, screw conveyor to the tank, n.1 horizontal screw with dipping paddles to sink the material with 1 gearmotor, extraction screw to centrifuge, DRYING CENTRIFUGE, 1300 mm long,, 22 kw drive, blower and pipes, installed power - used power in work: about 60-65% : 28, availability: immediate, options available: reconditioning , capacity: 300 kg/h depending on material and contamination

Control Other Grinding length [mm] 600 Grinding width [mm] 400 Grinding spindle: Speed 1,400 rpm Power 3.7 kW Grinding wheel dimensions (max.) 300 x 50 x 76.2 mm Work table: Clamping surface magnetic clamping plate, 600 x 400 mm Table load (max.) 600 kg Hydraulic table drive Longitudinal table stroke 200 - 650 mm Rapid traverse 28 m/min Grinding area 600 x 400 x 375 mm Equipment/accessories: Measuring System Engine Measurement System in X/Y/Z Dressing system prism arm for einkorn diamond Cooling coolant system with paper belt filter, tank capacity 140 l Other equipment Partial space encapsulation, work area light

Complete CSD PET Bottling Line – 12,400 BPH Manufactured: 2008–2009 | Location: Germany | Available: October 2026 This complete CSD (Carbonated Soft Drink) PET bottling line is designed for efficient and reliable production of carbonated beverages. The line is composed of high-quality European equipment from leading manufacturers such as SIPA, GEA Procomac, Arol, SMI, PE Labellers, Ventilo, Robopac, and TwinPak. The system is currently still in production, ensuring excellent operational condition and immediate demonstration possibilities. General Line Data Nominal Capacity: 12,400 bottles/hour Effective Capacity: approx. 10,000 bottles/hour Bottle Sizes: 0.5 L 0.75 L 1.5 L Bottle Type: Round PET bottles Cap Types Flat Cap: PCO 1881 Sport Cap: Aptar PCO 1881 Main Equipment Blow Molding Section Blow Molding Machine: SIPA – 8 cavity system Bottle Hand ...

The GEA decanter is sold together with the PLC control system and was used in oil production. The decanter has a central lubrication system and has been running for more hours.

- Very little hours - Hydraulic tailstock - CE Safety doors - Multi Fix Tool holders system  D1 - Chip conveyor

Aircooled chiller/Heat pump BLUEBOX GEYSER 2 MT 52 54.3 kW / 45.6 kW Cooling capacity: 54.3 kW / 15.44 tons (12/7 — 35°C) Heating capacity: 45.6 kW / 12.97 tons (40/45 —7°C) Year of manufacture: 2018 Options: Heat pump. Refrigerant circuit: 1 pcs. Heat exchanger: Plate Condenser: Copper / Aluminum Compressors: 2 pcs. Copeland ZP91KCE-TFD-422 (scroll) Type of refrigerant: R410а Number of fans: 1 pcs. (Frequency inverter) Dimensions: 1.41х1.21х2.4 m Weight: 575 kg Working hours: 26200/28300 h. Condition: Good

Plant for shredding of frozen blocks consisting of:, Coarse pre-cutting - Blocks are fed directly from the pallet into the machine with a forklift, the pre-cut pieces are taken over by a Z-band and transported to Vogelsang - shredding. They are inspected for metal contamination by a LOMA metal detector., The shredded parts are conveyed via a Z- conveyor belt to the batching plant. It has a capacity of approx. 2,000 kg. The batching container rests on load cells. A pallet box conveyor system ensures that the pallet boxes are filled with a preset weight and transported further after filling., Further data, photos, and videos available on request., The machines can also be purchased individually.

Goose neck shaped conveyor belt, Dimensions : 3,5 m. on floor mm. 2,2 m. horizontal + 1,18 m.inclined Angle 45° 1.166 mm discharging point, machine as new, used for test only Approx.450 mm working width Complete with transport paddles 1,5 kw gear motor Fitted with a 250 mm diam.magnetic drum at the end. Separate discharging outlet for extracted ferrous material, This machine was mounted under a 1500 WLK shredder, conditions: as new, type: extraction belt

Cup wheel Ø: 175 mm Table clamping surface: 150 x 250 mm large installation height without/with magnetic plate: 250/150 mm Grinding area: 100 x 360 or 150 x 190 mm Grinding spindle speed: 2800 rpm Drive motor: 380 V, 1.5 kW Approx. space requirement: 800 x 600 x 1600 mm Weight approx.: 200 kg

Geho ZD 900 in a sound-dampened enclosure with a Hatz 1D90E-Z diesel engine. The ZD900 piston pump is designed for vertical and horizontal dewatering. These positive displacement pumps are self-priming and ideally suited for pumping a mixture of water and air without any restrictions. Furthermore, these pumps can run dry without causing damage or wear to components. Optionally available with any desired coupling/connection. MAX 95 m³/h MAX: 20 MWK. In stock; please feel free to call or email us, we are happy to assist you. Additional information: FEATURES - Very quiet noise level - 47 dB(A) at 10 meters - 1D90E diesel engine - Easy access to engine and pump - Stackable thanks to sturdy integrated stacking corners - with forklift pockets for easy transport BENEFITS - Small and light, big in capacity, efficiency, and lifespan - Very quiet, 47 dB(A) at 10m. - All panels/doors are made of g ...

Embossing force: 40kN Heater: 2280 Watt with cabinet - ideal embossing press suitable for book cover, die-cuts from leather, imitation leather and cloth, as well carton and und carrier bags, flat plastic parts - embossing surface 15 x 21 cm - autom. foil feed

Several spare parts for a GEA Westfalia MSA 200-01-076 separator., Type of Machine: Spare parts separator

Complete falling film vacuum evaporator, previously used for infant milk, consisting of 5 bi-thermal effect TVR Evaporator with a direct steam injection (DSI) pasteurizer and an expansion chamber. Still mounted in the Danone plant in France till end of March 2026. The product feed rates in the installation can vary between 14 and 23 t/h with a comparative temperature between 78 and 54°C from the 1st to the 5th effect. The system is heated primarily by injecting steam into the thermo-compressor. The preheating of the incoming product is achieved via tubular heaters supplied by vapours drawn from the beams. A direct steam injection pasteurizer and expansion chamber is provided to pasteurize the product in a range of 118 to 133 °C., Line modified in 2000 to replace the mixing condenser with a tubular condenser and installing the heat treatment with direct steam injection., The evaporator  ...

Cream separator (Skimmer). Self cleaning. Machine comes with the bowl, motor (22 kW), motor cover, base plate with feet, water valves (original Westfalia), all controls including original GEA operation panel (excluding the box itself), all inlet/outlet pipes with pumps, flow indicators, sample valves, service tools for maintenance including pressing tool and instruction manual., Additional features:, Excluding:, - Box to add all controls inside., Type of Machine: Cream Separator / Skimmer, Capacity: 15.000 liter per hour, Bowl speed: 5.920 rpm, Motor: 22 kW - 380 V - 42,5 A - 1.460 rpm - 50 Hz - 3 Ph, Weight: ± 1.920 kg, Dimensions: 200 x 110 x 175 cm

Bacterial removing separator (Bactofuge). Self cleaning. Machine comes with the bowl, motor (22 kW), motor cover, baseframe with feet, manometers, counter pressure valve, flow regulation valve, water valves, sludge tank and service tools for maintenance including pressing tool., Additional features:, Excluding:, - Control panel., Type of Machine: Bacterial-Removing Centrifuge (Bactofuge), Capacity: 15.000 liter per hour, Bowl speed: 4.500 rpm, Motor: 22 kW - 380 V - 42,5 A - 1.460 rpm - 50 Hz - 3 Ph

Cream separator (Skimmer). Self cleaning. Machine comes with the bowl, motor (± 37 kW, no nametag on the motor), motor cover, base plate with feet, water valves (original Westfalia), control panel, all inlet/outlet pipes with pumps, flow indicator, manual counter pressure valve, manometer and service tools for maintenance including pressing tool., Type of Machine: Cream Separator / Skimmer, Capacity: 30.000 liter per hour, Bowl speed: 4.700 rpm, Motor: ± 37 kW - 400 V - 50 Hz, Weight: 2.150 kg, Dimensions: 205 x 111 x 180 cm

Unused hydrodynamic coupling which transmit mechanical power from the motor to the driven machine via fluid flow by two bladed wheels positioned face to face. The primary wheel is connected to the motor and acts like a rotary pump, while the secondary wheel is connected to the driven machine and acts like a turbine. Power transmission is proportional to the fill level in the working circuit. As a result of the mechanical separation of the drive and driven sides, the hydrodynamic coupling transfers the power wear-free, simultaneously dampening torsional vibration and torque shocks in the drive chain. These clutches are used in different kind of GEA Westfalia Cream Separators / Skimmers / Bactofuges, like model MSA 200 / MSB 200 / MSD 200 / CNB 215 / CND 215 etc., Type of Machine: Clutch Cream Separator / Skimmer, Weight: 45 kg, Dimensions: 80 x 60 x 40 cm

This GEA Niro Soavi NS3037H homogeniser is a 3-cylinder machine which is designed for 6.000 liter per hour with a maximum pressure of 100 bar. The homogensier is equipped with 1-stage with puppet valve cylinder. Manometer. Overpressure valve. Motor: 30 kW - 400 V - 53,37 Amp - 50 Hz - 1.470 rpm. Oil pumping system inside the machine. Stainless steel cladded., Additional features:, Excluding:, - Main control panel., Type of Machine: Homogeniser, Capacity: 6.000 liter per hour, Stages: 1 stage, Max. Pressure: 100 bar, Valve cylinder: Puppet valves, Piston diameter: 70 mm, Motor: 30 kW - 400 V - 53,37 Amp - 50 Hz - 1.470 rpm, Dimensions: 230 x 150 x 152 cm, Weight: 1.960 kg

Cream separator (Skimmer). Self cleaning. Machine comes with the bowl, motor (37 kW), motor cover, base plate, feet, desludge tank, inlet/outlet pipes, service tools for maintenance including pressing tool and several spare parts., Additional features:, Excluding:, - Control panel., - Water valves., Type of Machine: Cream Separator / Skimmer, Capacity: 25.000 liter per hour, Bowl speed: 4.500 rpm, Motor: 37 kW - 460 V - 60 Hz - 1.775 rpm - 61 A, Weight: 2.850 kg, Dimensions: 195 x 130 x 225 cm

Cream separator (Skimmer). Self cleaning. Machine comes with the bowl, motor (22kW), motor cover, base plate, feet, watervalves (original Westfalia) and inlet/outlet pipes., Additional features:, Excludi ng:, - CPM-valve for the pressure regulation., - Control panel., - Service tools for maintenance., Type of Machine: Cream Separator / Skimmer, Capacity: 20.000 liter per hour, Bowl speed: 4.500 rpm, Motor: 22 kW - 380 V - 42,5 A - 1.460 rpm - 50 Hz - 3 Ph, Weight: ± 2.300 kg, Dimensions: ± 190 x 112 x 220 cm

Bactofuge (Bacterial removing separator). Self cleaning. Machine comes with the bowl, motor (37 kW), motor cover, baseframe with feet, manometer on in / outlet, control panel (upgraded by Centrimax with Siemens S7 PLC and CE labelling) and several service tools for maintenance. It was working till the end of the production of the former dairy., Additional features:, Excluding:, - Water valves., - Sludge tank / cyclone., - Counter pressure valve., Type of Machine: Bacterial-Removing Centrifuge (Bactofuge), Capacity: 25.000 liter per hour, Bowl speed: 4.700 rpm, Motor: 37 kW

Indirect heated Thermisation unit previously used for the production of Creme fraiche 30% and mesophiles product 10%, but it can be used for all acidified + stabilized products. Skid mounted unit existing out of: Tubular Heat Exchangers (GEA Finnah A 544), level tank (200 liter), water pumps (4x Grundfos), flowmeter, valves for product and utilities, interconnecting piping, high pressure product pump (APV Gaulin, type Z4P-0,5BF serienr 96L34959, year 1996, capacity up to 4.000 liter per hour, motor 5,5 kW - 955 rpm - 400 V - 50 Hz) and the control panel with Siemens S5 PLC and Siemens Simatic OP37 operation panel. Current temperature program: creme fraiche: 35 - 51 - 71 - 40 - 29 °C or mesophiles: 25 - 55 - 75 - 40 - 23 - 10 °C. Maximum temperature possible: 85°C.Capacit y of the unit: currently set on 2.500 liter per hour but a ...

Hydrodynamic coupling which transmit mechanical power from the motor to the driven machine via fluid flow by two bladed wheels positioned face to face. The primary wheel is connected to the motor and acts like a rotary pump, while the secondary wheel is connected to the driven machine and acts like a turbine. Power transmission is proportional to the fill level in the working circuit. As a result of the mechanical separation of the drive and driven sides, the hydrodynamic coupling transfers the power wear-free, simultaneously dampening torsional vibration and torque shocks in the drive chain. These clutches are used in different kind of GEA Westfalia Cream Separators / Skimmers / Bactofuges, like model MSA 200 / MSB 200 / MSD 200 / CNB 215 / CND 215 etc., Type of Machine: Clutch Cream Separator / Skimmer, Weight: 45 kg, Motor: 80 x 60 x 40 cm

Cream separator (Skimmer). Self cleaning. Machine comes with the bowl, motor (37 kW), motor cover, base plate and feet, desludge tank, control panel (original Westfalia), water valves, all inlet/outlet pipes with manometer / flowindicator and service tools for maintenance., Type of Machine: Cream Separator / Skimmer, Capacity: 20.000 liter per hour, Bowl speed: 4.700 rpm, Motor power: 37 kW - 380 V - 72 A - 1.475 rpm - 50 Hz - 3 Ph, Weight: 2.200 kg, Dimensions: 190 x 130 x 225 cm

Wheel type disc atomizer with high speed belt driven motor. Motor power: 22 kW - 30 HP. Can be used for a spray dryer with an output up to 1.000 kg/h of powder. Wheel diameter: 210 mm. Stainless steel AISI316L wheel. Sanitary execution. Weight 400 kg., Type of Machine: Atomizer, Capacity: Used for a spray dryer with an output up to 1.000 kg/h of powder, Wheel diameter: 210 mm, Motor: 22 kW - 380 V - 42,5 A - 2.935 rpm - 50 Hz - 3 Ph, Dimensions: 120 x 120 x 235 cm, Weight: 400 kg

Cream separator (Skimmer). Self cleaning. Machine comes with the bowl, motor (11 kW), base plate, feet, control panel, water valves, inlet and outlet pipes and service tools for maintenance., Additional features:, Excluding:, - Motor cover., Type of Machine: Cream Separator / Skimmer, Capacity: 5.000 - 7.000 liter per hour, Bowl speed: 6.520 rpm, Motor: 11 kW - 380 V - 50 Hz - 1460 rpm, Weight: ± 1.300 kg

Watervalve set, previously used for a GEA Westfalia MSD 130-01-076., Type of Machine: Watervalve set

Unused gear wheel for a Westfalia MSA 200-01-076 skimming separator. Article number: 1166 3447 020. For a 50 Hz driven machine., Type of Machine: Gear Wheel, Drive line: 50 Hz, Condition: Never used

Cream separator (Skimmer). Self cleaning. Machine comes with the bowl, motor (15 kW), motor cover, water valves (original GEA Westfalia), inlet/outlet pipes with flow indicator, service tools for maintenance and some spare parts., Excluding:, - Base plate with feet., - Control panel., Type of Machine: Cream Separator / Skimmer, Capacity: 7.000 liter per hour, Bowl speed: 6.500 rpm, Motor: 15 kW - 380 V - 50 Hz - 1.450 rpm - 30 A , Dimensions: 170 x 120 x 150 cm, Weight: 1.200 kg

Cream separator (Skimmer). Self cleaning. Machine comes with the bowl, motor (22 kW), motor cover, base plate, feet, water valves (original Westfalia) and some service tools for maintenance., Additional features:, Excluding:, - Control panel., Type of Machine: Cream Separator / Skimmer, Capacity: 12.000 liter per hour, Bowl speed: 4.500 rpm, Motor: 22 kW - 380 V - 50 Hz - 1.470 rpm - 44 A , Dimensions: 185 x 150 x 150 cm, Weight: 2.000 kg

Cold Milk Cream separator (Skimmer). Self cleaning. Machine comes with the bowl, motor (26 kW), motor cover, base plate with feet, water valves (original Westfalia), inlet / outlet pipe and several service tools for maintenance., Additional features:, Excluding:, - Control panel and operation panel., Type of Machine: Cream Separator / Skimmer, Capacity: 15.000 liter per hour, Bowl speed: 5.920 rpm, Motor: 26 kW - 380 V - 50 A - 1.750 rpm - 60 Hz - 3 Ph, Weight: 1.920 kg, Dimensions: 200 x 110 x 175 cm

Bacterial-Removing Centrifuge (Bactofuge). Self cleaning. Machine comes with the bowl, motor (37 kW), motor cover, baseplate with feet, water valves (original Westfalia), all inlet/outlet pipes with pumps, manometers, flowindicator, counter pressure valve and pressing tool for, Additional features:, Excluding:, - Control panel., - All other service tools for maintenance., Type of Machine: Bacterial-Removing Centrifuge (Bactofuge), Capacity: 25.000 liter per hour, Bowl speed: 4.870 rpm , Motor: 37 kW - 380 V - 71 A - 1.770 rpm - 60 Hz - 3 Ph, Weight: 2.560 kg, Dimensions: 210 x 115 x 180 cm

Milk / Whey clarification separator (Clarifier). Self cleaning. Machine comes with the bowl, motor (36 kW - 230 V - 114 A - 1.775 rpm - 60 Hz - 3 Ph), motor cover, base plate with feet and service tools for maintenance. Heavy liquid: 1.0 kg/dm3 and solids: 1.1 kg/dm3., Addtional features:, Excluding:, - Water valves., - Control panel., Type of Machine: Clarifier, Capacity milk: 30.000 liter per hour, Capacity whey: 25.000 liter per hour, Bowl speed: 5.920 rpm, Motor power: 36 kW - 230 V - 114 A - 1.775 rpm - 60 Hz - 3 Ph, Weight: 1.950 kg, Dimensions: 195 x 112 x 170 cm

Cream separator (Skimmer). Self cleaning. Machine comes with the bowl, motor (18,5 kW), motor cover, cyclone, feet, water valves (original Westfalia), control panel (original Westfalia), all inlet/outlet pipes with flow indicators, all service tools for maintenance including pressing tool and a big set of spare parts. Instruction manual available., Additional features:, Excluding:, - Base plate., Type of Machine: Cream Separator / Skimmer, Capacity: 12.000 liter per hour, Bowl speed: 4.500 rpm, Motor: 18,5 kW - 380 V - 50 Hz - 1.465 rpm - 38 A , Dimensions: 185 x 150 x 147 cm, Weight: 2.020 kg

Cream separator (Skimmer). Self cleaning. Machine comes with the bowl, motor (11 kW - 220 V - 60 Hz -1.155 rpm - 39 A), inlet and outlet pipes and some service tools for maintenance., Additional features:, Excluding:, - Base plate and feet., - Water valves., - Control panel., - Several service tools for maintenance., Type of Machine: Cream Separator / Skimmer, Capacity: 7.000 liter per hour, Bowl speed: 6.540 rpm, Motor: 11 kW - 220 V - 60 Hz -1.155 rpm - 39 A, Weight: 765 kg, Dimensions: 125 x 95 x 150 cm

Continuous Butter Making Machine (CBM) which has a production capacity of ± 1.000 kg of sweet, sour, or cultured butter per hour (salted or unsalted). It operates with an input of approximately 2.000 liters of cultured and/or sweet cream per hour (35–42% fat, pH ~4.8, inlet temperature 8–13 °C). The unit is fully electrically driven. All product-contact parts and the frame constructed from stainless steel. It is CIP-cleanable for hygienic operation., The system is supplied with two separate stainless steel skids., Process skid, including:, - Balance tank, - Feed pump, - Vacuum system, - Ice water system, - Flow transmitter at cream inlet (ltr/h), - Buttermilk and CIP collecting tank, - Buttermilk/CIP pump, - Buttermilk plate cooler, - Interconnecting piping and manual valves, - Stainless steel control panel with Siemens S7 PLC, Exor touchscreen HMI, and Danfoss frequency converters ...

Milk pasteurisation line of 25.000 ltr/h with cream separator / skimmer. Temperature cylce: ± 3/4° (in) - regeneration - ± 55 °C (separator) - ± 72/75 °C (pasteurisation) - holding - regeneration - ± 3/4 °C (out). Line existing out of open level tank (2x lid, spraybowl), product pump (APV W 50/50), digital flow transmitter (Yokogawa FLXA402), Transmitter (Rosemount 8712) plate heat exchanger (APV N35 RKS, year: 2004, serial nr 1286, drawing no: NZ032, 4 sections, working pressure 6 bar), cream separator / skimmer (Westfalia MSA200-01-076, year 1980, serial nr 1669 642, self cleaning, bowl, motor (37 kW), motor cover, base plate with feet, water valves (original Westfalia), control panel including original GEA operation panel, all inlet / outlet pipes with pumps, flow indicator and service tools for maintenance including pressing tool), holding tube with slope, booster pump (APV P ...

Bactofuge (Bacterial removing separator). Self cleaning. Machine comes with the bowl, base plate, feet, desludge tank, control panel with GEA Operator Panel, water valves cover, all inlet/outlet pipes with flowindicator / manometer and instruction manual in German language., Additional features:, Excluding:, - Water valves., - Motor and motor cover., - Glass plate at the front side, to check the gear oil and to protect the gear oil to splash out., - Tools for maintenance / pressing tool., Type of Machine: Bacterial-Removing Centrifuge (Bactofuge), Capacity: 25.000 liter per hour, Bowl speed: 4.500 rpm, Motor: Excluded

Milk pasteurisation line of 25.000 ltr/h with cream separator / skimmer. Temperature cylce: ± 3/4° (in) - regeneration - ± 55 °C (separator) - ± 72/75 °C (pasteurisation) - holding - regeneration - ± 3/4 °C (out). Line existing out of open level tank (2x lid, spraybowl), product pump (APV Puma), digital flow transmitter (Yokogawa FLXA402), Transmitter (Rosemount 8712) plate heat exchanger (APV N35 RKS, year: 2004, serial nr 1286, drawing no: NZ0321, 4 sections, working pressure 6 bar), cream separator / skimmer (Westfalia MSA200-01-076, year 1980, serial nr 1669 641, self cleaning, bowl, motor (37 kW), motor cover, base plate with feet, water valves (original Westfalia), control panel including original GEA operation panel, all inlet / outlet pipes with pumps, flow indicator and service tools for maintenance including pressing tool), holding tube with slope, booster pump (APV Pum ...