ge jenbacher used for sale

Guillotine, reel slitters for paper and plastics 30 T, Working width 1.500 mm, Working height 850 mm, Cutting force 1x30 Ton., 7,5 Kw drive 400V 50 Hz., No.1 pump 24 l/min, Volume 16 ccm, Speed : up 53 mm/sec, Speed down (80 Bar): 25 mm/sec, Oil tank : 135 lt., With Knife protection, hydraulic locking system, pull rope emergency system, protection grids, complete with control panel, top lodging, space saving for hydraulic pack, Users manuals, drawings, CE compliance, 12 month limited warranty, Possible addition of conveyor belt, reel disposer, spare knife on separate offer., Force: 30 T, availability: about 8 weeks time from confirmation

Guillotine, reel slitters for paper and plastics 25 T, NOW IN STOCK, Working width 1.500 mm, Working height 1.250 mm, Cutting force 1x25 Ton., 7,5 Kw drive 400V 50 Hz, No.1 pump 24 l/min, Volume 16 ccm, Speed : up 53 mm/sec, Speed down (80 Bar): 25 mm/sec, OIl tank : 135 lt., With Knife protection, hydraulic locking system, pull rope emergency system, protection grids, complete with control panel, top lodging, space saving for hydraulic pack, Users manuals, drawings, CE compliance, 12 month limited warranty, Possible addition of conveyor belt, reel disposer, spare knife on separate offer., Force: 25 T, availability: NOW IN STOCK

Guillotine, reel slitters for paper and plastics, These reel slitters are particularly recommended to reduce the size of scraps before a further recycling process. They are ideal for paper, plastic, fabric, rubber, polylaminated, AL foil, in the shape of REELS, BALES, LOOSE MATERIAL, FIBERS, and more., Proposed in different standard dimensions and cutting forces, or bespoke to project, these machines feature a sturdy steel structure, top quality components and are constructed according to the strictest EU regulations to perform at their best and keep their value in the years with the simplest maintenance., Sturdy and reliable, these guillotines give excellent performances even on lower tonnage, for paper and plastic film reels., with increased speed system, our guillotines can double the work done, compared with other models., One operator is needed to work in full safety conditions: 2-h ...

General SKU436W1414 LocationBarneveld MakeWestfalia Separator TypeCA 505-02-12 Main Features MaterialStainless steel Motor90 KW Specified Features - Decanter 2-Phase decantercheck Screw diameter510/300 mm Screw length1700 mm InletDN60 Liquid outletDN50 Motor90 kW, 400 volt, 2970 rpm With variable speed drivecheck With hydraulic unitcheck Motor0,25 kW, 380-420 volt, 1420 rpm Max. rotor speed3350 rpm MaterialStainless steel 1.4404 (316L) General No.1699 488 Year of construction1992 Floorspace1,10x3,60 m Total height1,60 m Weight8700 kgConsumer wasteStarchBiotechnologyAgrochemicalsPlastic & polymersCatalysts & fillersOrganicsPaper & otherE-waste & metalAnimal feedDyes & pigmentsPlastic & rubberDecantersMinerals & inorganicGEA WestfaliaIndustries > Recycling > Consumer wasteIndustries > Food & Feed > StarchIndustries > Chemical > BiotechnologyIndustries > Chemical > ...

WATER COOLING TANK, for strand pelletizers, Constructed in AISI4304 stainless steel, On 4 wheels (2 with brakes), Overall dimensions : LxWxH 2,5 x 0,5 x 1,0 mt., tank : LxWxH 2,5 x 0,5 x 0,25 mt., conditions: very good

Used CMF microfiltration made by GEA. New: 2013. CMF membrane installation. Ceramic membranes: 1.2 microns. Capacity 22.000 liters / hour.

1 solenoid valve, Fabr. GEMÜ, EPDM, Type 225, 230 V 2 solenoid valves Fabr. GEMÜ, EPDM, Type 225, 24 Volt 1 solenoid valve Fabr. GEMÜ, FPM, Type 205, 24 V, new

; Gross weight [kg]: 13500; Accessories: 40FT HC Unused Genset Container

Inside dimensions: 1182022002650 (LWH in mm); Accessories: 40FT HC Brand New Genset Container

This is a LITTLE GEM glass bottle filler for 1 Pint milk bottles round format. The machine cuts and applies with heat sealing the aluminium cap that is done via a fords cutter and capper. This machine can do 1pint and 2 pints. The machine has been running until 2025 and can be sold either as is working condition or fully refurbished . The machine is driven by 1 single motor that is located at the bottom of the machine turning two gears one opposite to the other making this a very robust and easy to maintain system., Capacity: 2000 bottles per hour , Aluminium Cutting: Fords systems , Format: 1 Pint Milk Bottles , Sealing Device: Included , Construction: Fully Stainless steel on product connection Parts , Filling Type: Mechanical valves that the bottles lifts the rubbers up and the milk flows through, one the mechanical vacuum is activated this helps to avoid over, Collection Table: Inclu ...

A rotary labelling machine for bottles from the manufacturer GERNEP GmbH is offered. Front and back labels, wet glue/cold glue units, self-adhesive units. Inspection by arrangement possible.

Height=2.31 m, Overall length= 3.62 m, Overall width= 0.82 m, Net weight= 504 kg,

VERTICAL MIXER 16.000 lt., Total height approx 6.450 mm, Loading from top with cyclone and dust sleeves collector, Max diam.2.380 mm., Constructed in painted electro-welded carbon steel., Inner auger diam.350 mm., Sampling hopper with safety grid and shutter, mm.600×500, Pulley and belt transmission, protected by carters, Inspection doors with safety limits, Cleaning hinged door with on bottom of cone for complete discharging,, with safety opening, Side discharging pipe to big bag with valve, paddle type max level indicator, automatic greasing kit, 11 kw electric motor, Complete with control panel., Electric voltage: 400 V, 50 Hz, auxiliaries a.c. 24 V, CE compliance and instruction manual, installed power - used power in work: about 60-65% : 11

grinding length: 600 mm grinding width: 350 mm workpiece height: mm total power requirement: 7,5 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Used GEA Finnah model 2209.014 cheese production and packaging machine. New: 2000. Maximum capacity: 8x28x60 = 13,440 cph (28-30 staples/min) Capacity: 150 g (120 g, 200 g) Product: cream, homogenised cheese Filling: aseptic Voltage 230/360 V 50 Hz Pressure 8 bar

A cassette set of bending tools for FASTI MAK

Cream Separator for milk, whey and dairy products MANUFACTURER: GEA Westfalia TYPE: MSF 400-01-777 CAPACITY: 50.000 Liter per hour MACHINE COMES WITH: Water control valves, motor 60 kW, motor cover, discharge tank, Fristam discharge pump, service tools, toolbox and instructions book. APPLICATION: Cream fat separation from milk, cream fat separation from whey, skimming, standardization for dairy products. PRICE: Please ask Westfalia MSE 500 cream separator, westfalia mse 350 cream separator, westfalia mse 200 cream separtor, westfalia msd 200 cream separator, westfalia msd 250 cream separator, westfalia mse 400 cream separator, westfalia mse 500 cream separator, gea westfalia cream separator

Pallet collar for Euro pallets Width: 865 mm Depth: 1270 mm Height: 1480 mm Suitable for Euro pallets: · Pallet dimensions: 800 x 1,200 mm (WxD) · For optimal use of the pallet surface · Quick installation · Collapsible for space-saving storage · Surface: green · Stackable: 4-fold · Payload: 300 kg More items - new and used - can be found in our shop! International shipping costs on request!

GUILLOTINE REEL SLITTER 60 T, Working width 3.000 mm, Working height 850 mm, Cutting force 2x30 Ton., No.2 pumps 38+38 lt/min, volume 26,4+26,4 ccm, Speed up: 51 mm/sec, Speed down : (80 Bar) 31-15 mm/sec, Oil tank 255 lt., 15 Kw drive 400V 50 Hz, With Knife protection, hydraulic locking system, pull rope emergency system, protection grids, complete with control panel, top lodging, space saving for hydraulic pack, Users manuals, drawings, CE compliance, 12 month limited warranty, Possible addition of conveyor belt, reel disposer, spare knife on separate offer., Force: 60 T, installed power - used power in work: about 60-65% : 15

Key data: 6 KW, 9 kVA, 380 V

Generator set Geko type: 9001 9 KVA Runs great and can be demonstrated before Type: 9001 ED-AA/SHBA (SEBA) Motor Briggs & Stratton 18 HP-V-Twin - Petrol Connection: 1x Schuko 230V 1x CEE 230V 32A 2Pol 1x CEE 380V 16A 5Pol Power: 9kVA Operating hours: 842 h Weight: approx. 124kg No warranty, no returns Input errors and errors excepted

Technical data see Pictures attached

The GERNEP Rollfed 24-1056 2RA from 2013 is a reliable roll-fed labeller for PET and glass bottles with high production capacity. With 24 stations and 2 gluing units, it enables uninterrupted operation and precise labeling. Particularly suitable for the food and beverage industry.

A compact ammonia refrigeration system GEA with evaporative condenser and pump-operated plate evaporator is available. Design: split design, refrigeration capacity: 247kW, compressor speed: 1450rpm, evaporation temperature: 0.7°C, condenser capacity: 300kW, wet-bulb temperature: 21°C, max. condensing temperature: 35°C, refrigerant: NH3, max. operating pressure high pressure/low pressure: 23bar/16bar. Secondary refrigerant: electrolysis water, secondary refrigerant temperature inlet/outlet: 6°C/2°C, secondary refrigerant volume flow: 54m³/h, secondary refrigerant pressure drop: 53kPa, refrigerant charge: 50kg, oil charge: 20l, compressor: Grasso 410. Machine dimensions X/Y/Z: approx. 4300mm/2000mm/2800mm, weight: approx. 6500kg. Documentation available. An on-site inspection is possible.

Availability: as of now Machine dimensions (LxWxH): 0.8 x 0.8 x 2.0 m Weight: 150 kg Bottle drying system was operated without technical problems until 04.2026. The dismantling was then carried out by qualified personnel. Consisting of: - 1 Paxton high-performance centrifugal blower XT 500 4kW - 2 stainless steel heavy-duty air blades 580mm lg. - 2 stainless steel air blade holders for Adjustment in 3 levels - 1 stainless steel base frame with attached Blower - 1 stainless steel air distributor 2 x DN 76 mm - 1 soundproof enclosure for XT 500 blower - 4 stainless steel covers on all sides as Splash guard Additional equipment: - 1 pc. Geset stainless steel nozzle 40 x2 mm incl. piping and hose For lid blow-off before inkjet The Gesete XT 500 bottle drying machine was manufactured in 2014 and is designed for drying bottles in front of a labeling machine (Etima) ...

This 3-axis Finn-Power Shear Genius TRS 6 SBU was manufactured in 1996, featuring a punching force of 300 kN and a sheet working range of 2500 mm × 1250 mm. It supports up to 21 tool stations and can handle sheet thicknesses up to 6 mm. Automatic tool change system enhances productivity. Consider the opportunity to buy this Finn-Power Shear Genius TRS 6 SBU punching and bending machine. Contact us for more information.

Qty. 1 Second-hand CI Flexo Printing Machine Brand & Model: Carint Geared/gearless: Geared Built: 2000 No. of colours: 6 colours (6+0) Material to print: PE, PP, OPP, PET, Paper Printing width: 1250 mm Material width: 1280 mm Print repeat: 360 mm – 1040 mm Mechanical speed: Up to 300 m/min Un-winder and winder: Un-winder: Turret unwinder; non-stop Max roll dia.: 800 mm Expanding shafts: 3” Winder: Turret unwinder; non-stop Max roll dia.: 800 mm Expanding shafts: 3” Pumps: 6 x pcs, Pneumatic pumps Drying system: Electrical drying

Made in sturdy painted carbon steel, Size and angle depending on availability of the moment

Dissolver VMA Getzmann Dispermat LC 30 Power 0.3 kW Speed range 0-20000 1/min Toothed pulley 50 mm Accessories on request Very good condition, straight from production

Manufacturer: Georg Model: 4518-3-07 Year of Manufacture: 2008 Material Processed: Cold-rolled steel strip Tensile Strength: 200 – 600 N/mm² Material Thickness: 0.4 – 4.0 mm Strip Width: 300 – 1650 mm Edge Scrap Width: max. 100 mm per side Strip Speed: 0 – 60 m/min Type of Machine: Edge Scrap Cutter with Trough Conveyor Find more here - .ucymachines/ Contact us at - sales@ucymachines

table length: - mm table width: - mm ampere: - A : für MK3 total power requirement: - kW weight of the machine ca.: 4 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: - mm table width: - mm ampere: - A : für MK3 total power requirement: - kW weight of the machine ca.: 4 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

GEA Westfalia UCA 450-00-02 centrifugal decanter manufactured in 1998, equipped with a complete flocculant preparation and dosing system. The equipment has a product feed pump, flocculant dosing pump, flocculant concentrator pump and auger for solids discharge. Includes electrical panels, maximum speed of 3,000 rpm and capacity to work with sediments of up to 2,000 g/dm³. It comes with an operating manual, electrical diagrams and a list of spare parts. Technical characteristics Model UCA 450-00-02 Year of manufacture 1998 Maximum speed 3,000 rpm Maximum sediment density 2,000 g/dm³ Equipment Setup Electrical panels Product Feed Pump Flocculant dosing pump Flocculant concentrator pump Complete flocculant system Screw for solids discharge Documentation Operation Manual Electrical diagrams Spare parts list Product Type Sludge In your state

A self-cleaning disc stack centrifuge (disc separator) GEA is available. Drum speed range: 4000-4800rpm, drum diameter: 682mm, max. feed density liquid/solids: 1.1kg/dm³/1.3kg/dm³, drum volume: 125l. An on-site inspection is possible.

weight: . kg taper MK: . Thread capacity: M24 0 Various lengths The technical data is provided by the manufacturer or operator and is therefore non-binding for us. We reserve the right to prior sale, our terms and conditions of business and sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of warehouse space, 70-ton crane capacity More than 10,000 accessories for your workshop If you want to sell machinery, production lines, or your business, please contact us. Further offers can be found on our website. Viewings are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Set of 70 bearing housings and roller bearings, SKF, SNR, INA… , mint condition Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. Mint condition! - never been used and is in mint condition, - comes from a spare parts warehouse of a certified production facility, An exceptional special price of € 6 per item, excluding VAT. The original price is at least 10 to 15 times higher. We can divide the bearings into 3 groups: 1) Approx. 44 pieces in original cardboard packaging 2) Approx. 15 pieces in original foil packaging 3) Approx. 11 pieces open, unused, fully functional bearings. See stock list on photo. Minor defects of 1-2% possible. These are brand-name products only. Due to the extremely low package price, we cannot offer any guarantee/warranty in this case. For these goods, we must exclude the buyer's war ...

Lot of approx. 265 small roller bearings, SKF, FAG, INA, , mint condition Please note: This is an original product and not a replica from... Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. Mint condition! - never been used and is in mint condition, - comes from a spare parts warehouse of a certified production facility, An absolute special price of € 0.7/piece excluding VAT. The total original price is at least 7 to 10 times higher. We can divide the bearings into 3 groups: 1) Approx. 225 pieces in cardboard or foil original packaging, including one item with 50 pieces (various SKF items such as minimal bearings, seal sets, etc.). Many bearings are from a large package where the individual bearings are not packaged. 2) Approx. 40 open, unused, fully functional bearing units. See bearing list on photo. Minor erro ...

This Geminis GHT-4 720 x 3000 was manufactured in 1999. It features a maximum swing over bed of 720 mm and a distance between centres of 3000 mm. The main spindle supports a speed up to 1600 rpm with a power of 17/20.5 kW. It includes a Duplomatic turret with 8 tool positions and a longitudinal chip conveyor. Consider the opportunity to buy this Geminis GHT-4 720 x 3000 horizontal turning machine. Contact us for further details regarding this machine.

Prepress machine model CTP Type: Suprasetter A52/A75, GEN III Manufacturer: Heidelberg Year: 2011 Complete with RIP and decommissioning SW Number of exposed plates: 113,000 Number of exposed m2: 46,000 RIP: Metadimension 10.01 Decommissioning: Prinect Signa Station 10.02 The imaging unit is in excellent condition with regular service and a low number of exposed plates Imcluded hand hole punch Find more here - .ucymachines/ Contact us at - sales@ucymachines

This Okuma Genos L 300E-MY-e was manufactured in 2018. A robust horizontal turning machine located in Italy, it features a 450 mm maximum swing and a workable length of 1020 mm. The spindle supports a speed of 3000 RPM with a bar capacity of 65 mm. Equipped with a 12-position turret and motorized tool spindle capable of 5000 RPM. Contact us for more information about this machine.

This 3-axis GENTIGER GT-105V was manufactured in 2008. Ideal for precision machining, this vertical machining center offers robust construction and reliable performance. Consider the opportunity to buy this GENTIGER GT-105V vertical machining center. Contact us for more information.

This 3-axis GEHRING L2-630 vertical honing machine was manufactured in 2010. It features a 6-station rotary table, two honing stations, two measuring stations, and a brushing station. Fully automated with a robot feeder, consider the opportunity to buy this GEHRING L2-630 vertical honing machine. Contact us for more information.

honing diameter: 12 mm stroke: 40 mm throat: mm total power requirement: 15 kW weight of the machine ca.: 5 t dimensions of the machine ca.: m 3 spindle honing machine with in process measuring The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

GEA Filtration UF / MF membrane filtration plant Ultrafiltration / Microfiltration Plant Year 2006 Applicable: - Milk protein concentration MPC, - Milk casein concentration MCC, - Whey protein concentration WPC, - Yogurt, strained yogurt, quark - Feta cheese, fresh cheese - Cream cheese & labneh Spiral wound membrane filtration Membrane filter elements 6 '' diameter 4 x loops (stages) 32 x tubes (housings) Total membrane capacity 96 pcs 6338 elements Total membrane surface area 1824 m2

GEKA BENDICROP 50 ironworker machine was built in 2018 in Spain by MAQUINARIA GEKA S.L.U. The machine, designed for the comprehensive machining of steel parts, enables a wide range of operations to be performed in one place. This solution significantly improves the production process and reduces the need for additional machines. The GEKA BENDICROP 50 is equipped with 5 work stations for punching holes, bending flat bars, and shearing flat bars, angle bars and steel bars. Each station features high-quality, quick-change tools, which allow the machine to be adapted to current production requirements. The design, based on a rigid, durable frame, ensures high operational stability even during intensive use. As a result, the GEKA BENDICROP ironworker machine is an excellent choice for production plants and locksmith workshops. The total weight of the machine is approximately 1000 kg. Te ...

Little-used mixing, dosing and gluing system with gear pump in good condition: T-S-I MASTERMIX GEAR BASIC – Mixing and dosing system for 2K silicone adhesives – Two-component gear pump dosing system – Hose package 2.5 m, 2K gun – Control Siemens S7-200 – Overpressure/deficiency shutdown – Pot life monitoring with acoustic warning – 200-litre A follower plate – 20-litre B follower plate – Swivel arm extension 800 mm – Swivel arm elevation 300 mm – Extension of hose package 1000 mm – automatic hose down at parking position – Year of construction 2012, rebuilt by T-S-I in 2016/17 – Facility was little used – Sales from the Karlsruhe location / Southern Germany – Viewing possible by arrangement

A CNC sinker EDM machine is offered. Travels X/Y/Z: approx. 565mm/400mm/415mm, table size: 840mm/600mm, max. workpiece weight: approx. 1000kg, max. dielectric fluid level above the table: approx. 360mm. Machine dimensions X/Y/Z: approx. 1110mm/1840mm/2780mm, machine weight: approx. 2750kg. An on-site inspection is possible.

General SKU427W1351 LocationBarneveld CEcheck MakeGel Detmold Main Features MaterialStainless steel Surface0.28 m2 Sizes diameter600 mm Specified Features - Vibro sieve Vibro sievecheck Sieve surface0.28 m2 Number of sieve decks:1 Sieve sizesø 600 mm Inlet1050 x1000 mm (bag dump station) Outletø 190 mm Drive vibro motor2 x 0.47 kW Sieve perforation10 x 10 mm MaterialStainless steel 1.4305 (303) General TypeCAD01-4102 Year of construction2010 Mounted on mild steel framecheck Floor space1,1 x 1,2 m Total height2,2 m Weight800 kg Extra Specifications- with bag dump station on top (dimensions inlet 1050x 1000 mm x 1200 mm)- level sensor in outlet hopper- pneumatic hamer on hopperConsumer wastePowdered foodsGeneric medicinesTea, herbs & coffeeStarchBiotechnologyRubberAgrochemicalsSpicesPlastic & polymersVibro sievesCatalysts & fillersFeed additivesOrganicsPaper &  ...

Casing-in machine, Make CMC, Model Q-Case / Gemat, Year 2011, Max size 500 x 420 mm (roll width 420 mm), Min size 100 x 120 mm Thickness 2 - 80 mm Available direct ..., Max size: 500 x 420 mm (roll width 420 mm), Min size: 100 x 120 mm, Thickness: 2 - 80 mm

stroke: 70 mm work height max.: 1094 mm throat: 500 mm : 40 in 14 mm no. of strokes: 20 Hub/min throat: 500 mm : 80 to engine output: 9 kW range L-W-H: 1980x1150x2000 mm weight: 2000 kg Accessories / equipment: - punching table The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 110 t : Ø 40x20 mm throat: 500 mm engine output: 9 kW no. of strokes: 28 Hub/min stroke max.: 80 mm weight: 3150 kg Accessories / equipment: - punching table The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.