ge healthcare used for sale

Key data: 2000 KW, 2500 kVA, 400 V

2MW Cummins QSV91 available complete with control panel, gas line, heat exchanger, log books and maintenance manuals etc.

Geared motor, electric motor, electric geared motor, spur geared motor -Manufacturer: SEW-Eurodrive, spur gear motor -Type: DF 132-G90 S/6 -Speed: 22 rpm -Power: 1 kW -Shaft: Ø 40 x 80 mm -Protection rating: IP54 -Dimensions: 575/250/H240 mm -Weight: 42 kg

DC motor, servo motor, geared motor, electric motor, DC geared motor, DC shunt-wound geared motor -Manufacturer of gearbox: Nord., type 1SI50F F i =15 -Speed: 200 rpm -Engine manufacturer: B&R Type 8LVA23.R0030D100-0 -Voltage: 57 V -Shaft: Ø 25 x 50 mm -Dimensions: 275/200/H170 mm -Weight: 7.5 kg

Gearboxes, spur gears, bevel gears, worm gears -Manufacturer: Nord, Gearbox type SK 1SI40F -Translation: i = 15.00 -Hollow shaft: Ø 18 x 83 mm -M2 max: 49 Nm -Dimensions: 150/120/H150 mm -Weight: 2.7 kg

DC motor, servo motor, geared motor, electric motor, DC geared motor, DC shunt-wound geared motor -Manufacturer of gearbox: Nord., type 1SI50F F i =15 -Speed: 200 rpm -Engine manufacturer: B&R Type 8LVA23.R0030D100-0 -Voltage: 57 V -Shaft: Ø 20 x 25 mm -Dimensions: 275/140/H175 mm -Weight: 7.2 kg

Key data: 7370 KW, 9213 kVA, 11 V

Five (5) Surplus/Never use/Never Installed, Caterpillar 16CM32C, 7370 kW, 11,000v. 60 Hz. These units can burn Diesel, Gas Oil, Marine Gas Oils (MGO), Marine Diesel Oil (MDO). Year of Manufacturing of this power plant is 2009. The sale of these units include: Barring Gear, Air Intake System, Fresh Cooling Water System, Exhaust System, Diesel Oil System, Lubrication System, Air Starting System, Control Systems and more The generator is a GE Synchronous Generator, 9213 kVA, 7370 kW, 10 Poles, 720 RPM, 11,000v. 60 Hz. 0.8 P.F. IP54 IC81W. This unit comes with IMO Tier II certification and ABS certifications for the Heat Exchangers, Flexible Couplings, Diesel Engine and Generator. The shelf life of these units is over the five-year limit given by Caterpillar. Therefore, these units no longer have the Caterpillar Warranty. Unit is now ready for shipment.

Key data: 5980 , 6900

Available complete natural gas power plant of a Wartsila 18V34SG. The engine stopped running a full load with all the maintenances done. The aeros for the cooling system are not included, only the exchangers. Brand: Wartsila Model:18V34SG Brand Generator: ABB Power: 5980kW Fuel oil: Natural Gas Yom:12/1999 RPM: 750 Hours:133000 hours We can have 1 more units.

Indexer, indexing gear, cam indexer, rotary table indexer, rotary indexing drive -Manufacturer: Candex, cam indexer -Type: RU45DFS-02-180-2RX-CN -Shaft: Ø16 mm / 2x Ø14 mm -Translation: 1:2 -Dimensions: 160/150/H130 mm -Weight: 5.2 kg

Geared motor, electric motor, electric geared motor -Speed: 3/25 rpm -Power: 0.07/0.55 kW -Brake -Design: B14 -Shaft diameter: Ø 20 mm -Protection class: IP 54 -Weight: 38 kg

Geared motor, electric motor, three-phase motor -Speed: 36/144 rpm -Power: 2.2/5.5 kW -Type: RF83WD132ML-8-2BS/HL/TF -Brake -Design: B5 -Shaft diameter: Ø 50 mm -Protection class: IP 33 -Number: 2x motors available Price: per piece -Dimensions: -Weight: 160 kg

heavy gearbox, spur gear gearbox -Translation: 186:1 -Drive shaft: Ø 16 mm -Output shaft: Ø 50 mm -Number: 2x gearboxes available Price: per piece -Weight: 80 kg/piece

geared motor, electric motor -Speed: 10/20 rpm -Power: 0.37/0.88 kW -Design: B3 -Brake -Shaft diameter: Ø 40 mm -Protection class: IP 44 -Weight: 60 kg

Geared motor, electric motor, three-phase motor -Speed: 29/117 rpm -Power: 0.06/0.25 kW -Design: B3 -Shaft diameter: 25 mm -Protection class: IP 54 -Weight: 20 kg

Geared motor, electric motor, electric geared motor, geared motor for stop -Speed: 7.1/320 rpm -Power: 0.16/3 kW -Design: B5 -Shaft diameter: 30 mm -Protection class: IP 54 -Weight: 40 kg

Geared motor, electric motor, electric geared motor -Speed: 15 rpm -Power: 0.75 kW -Design: B5 -Shaft diameter: 25 mm -Protection class: IP 54 -Weight: 40 kg

Geared motor, electric motor, electric geared motor -Speed: 25 rpm -Power: 0.55 kW -Design: Hollow shaft -Brake -Shaft diameter: 30 mm -Protection class: IP 54 -Weight: 30 kg

Geared motor, electric motor, electric geared motor -Power: 0.37 kW -Speed: 43 rpm -Design: B5 -Shaft diameter: 25 mm -Protection class: IP 54 -Weight: 15 kg

Geared motor, electric motor, electric geared motor, geared motor for stop -Speed: 7.1/320 rpm -Power: 0.16/3 kW -Design: B5 -Shaft diameter: 30 mm -Protection class: IP 54 -Weight: 40 kg

Geared motor, electric motor, electric geared motor -Speed: 15 rpm -Power: 0.37 kW -Design: Hollow shaft -Shaft diameter: 30 mm -Protection class: IP 54 -Weight: 30 kg

Geared motor, electric motor, electric geared motor -Speed: 16 rpm -Power: 0.37 kW -Design: Hollow shaft -Shaft diameter: 30 mm -Protection class: IP 54 -Weight: 30 kg

Geared motor, electric motor, electric geared motor -Speed: 27 rpm -Power: 0.12 kW -Design: B3 -Shaft diameter: 20 mm -Protection class: IP 54 -Weight: 10 kg

Key data: 1186 KW, 400 V

Jenbacher 416 Biogas CHP Generating Set Engine overhauled in Aug 2022 at 62.850 hrs. Model - Jenbacher 416 Hrs - 86,600 Year - 2014 Fuel - Biogas Capacity - 1186 kW HZ: 50 V: 400 Scope of supply: Engine, Alternator, Base Frame, Control Panel (Dia.Ne XT3) Gasline, Exhaust Gas Heat Exchanger, Water Plate heat Exchanger, Exhaust cooler, Ventilators, Piping and Cabling. Available for sale from Gas Engine Exchange. Please check our complete range of equipment at gasengineexchange.com

Geared motor, electric motor, electric geared motor -Speed: 77 rpm -Power: 0.55 kW -Design: Angle gear -Brake -Shaft diameter: 19 mm -Protection class: IP 54 -Weight: 22 kg

Six geared motors Lenze in mint condition are available. Gear ratio: 7.617, motor type: G50BB160MVBR3C00, oil type: CLP 460, oil quantity: 1.4l, degree of protection: IP55, insulation class: F, efficiency class: IE3, operating mode: S1, max. power: 7.35kW, max. speed: 2580rpm, weight: approx. 70kg. An on-site inspection is possible.

very good condition,

Geared motor, electric motor, electric geared motor -Speed: 49 rpm -Power: 0.15 kW -Design: B3 -Shaft diameter: 20 mm -Protection class: IP 54 -Number: 1x motor available Price: per piece -Weight: 8 kg

adjustable gearbox, variable speed gearbox -adjustable -Design: B5 -Angle gear ratio: 1:15 -Inlet shaft diameter: 19 mm -Output shaft diameter: 25 mm hollow shaft -Weight: 26 kg

Wheel diameter: 160mm, max. wheel width: 355mm, module range: 0.5-4.5, max. cutter diameter: 115mm, max. cutter length: 105mm, cutter head swivel range: 120°, speed: 400rpm, distance between centers: 410mm. Machine dimensions X/Y/Z: approx. 2000mm/1500mm/2000mm, weight: approx. 3500kg. An on-site inspection is possible.

CHURCHILL PH3615 gear hobbing machine Max workpiece diameter 914 mm Max diametral/ pitch- 8 Module, 3 D.P. Horizontal centre distance:-63,5- 559 mm Max horizontal travel 469 mm Height hob centre to worktable: 127- 508 mm Max travel of vertical feed 381 mm Max height worktable to tailstock centre768 mm Table diameter 762 mm Table hole (diameter x depth) 89 x 381 mm Hob dia x length 178 x 203 mm Max travel of hob slide 127 mm Diameter of hob arbor 32 mm Hob spindle speeds, infinitely variable 50 – 200 rpm Vertical feeds 0.38 – 5 mm Main drive motor 10 HP Floor area 3960 x 2130 x 2300 mm Weight 11,500 kg Extended set of change gears Complete documentation Operational variable speed drives for main motor and feed drives

Gearbox, spur gear, angle gear, reduction gear -Translation: 1:1.5 -Drive shaft: Ø 30 mm -Dimensions: 400/340/H280 mm -Weight: 32 kg

Key data: 800 V, 400

Complete CHP MWM 2016V16 C genset in sound-proof casing. Fuel - Natural Gas Capacity: 800 kW HZ: 50 V: 400 Scope of Supply: Engine, Alternator (Marelli), Control Panel, Gasline, Heat Exchanger, Flue gas cleaner, Soundproof casing, Frame. Available for sale from Gas Engine Exchange. Please check our full range of equipment at gasengineexchange.com.

Geared motor 220 volts, angle gearbox, electric motor -Voltage: 220 V -Power: 1100 W 5.0 A -Speed: 12 rpm -right/left rotation -Control switch -Dimensions: 650/220/H230 mm -Weight: 13 kg

Power take-off gearbox, hydraulic pump gearbox, gearbox, spur gear gearbox, reduction gearbox -Translation: 1:4 -for: hydraulic pump -PTO shaft input: 35 mm -Splined shaft output: 25 mm -Weight: 6 kg

geared motor, electric motor -Speed: 53 rpm -Power: 0.18 kW -Design: B5 -Shaft diameter: Ø 17 mm -Brake: 24 V -Protection class: IP 65 -Weight: 8 kg

max. wheel diameter: 600 mm gear width: 0 mm max. module: 16 (25) min. module: 1 center distance betw. workpiece-tool min/max.: 40 - 590 mm diameter of hob: 290 mm cutter length max.: 470 mm tangential adjustment: 450 mm milling head -swivable +/-: 45 ° milling head speed: 15 - 380 U/min table rotation speed: 50 U/min milling spindle drive: 37 kW table diameter: mm table load: 3750 kg feeds: 2000 mm/min Control: Siemens 840D total power requirement: 115 kVA weight of the machine ca.: 31 t dimensions of the machine ca.: m - 6-axis CNC control Siemens Sinumerik 840 D - complete covering - counter stay - Coolant Unit - Chip Conveyor The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

geared motor, electric motor -Speed: 53 rpm -Power: 0.18 kW -Design: B5 -Shaft diameter: Ø 17 mm -Brake: 24 V -Protection class: IP 65 -Weight: 8 kg

geared motor, electric motor -with: integrated frequency converter -Speed: 92 rpm -Power: 0.18 kW -Design: B5 -Shaft diameter: Ø 17 mm -Protection class: IP 54 -Weight: 10 kg

geared motor, electric motor -Speed: 9.6 rpm -Power: 0.12 kW -Design: B3 -Shaft diameter: Ø 35 mm -Brake: 24 V -Protection class: IP 65 -Weight: 17 kg

Mounting plate with JCB / Miller / Geith mount, - Suitable for demolition and sorting grapples:, - GRP450, - GR45, - GRP750, - GR75, - Recording: JCB / Miller / Geith, - Hole pattern: 36 x 48 cm, - made of machine steel S355, - Dimensions see product images, - Available immediately from stock

geared motor, electric motor -Speed: 140 rpm -Power: 0.37 kW -Design: B5 angle -Shaft: Ø 20 mm -Brake: 24 V Protection rating: IP65 -Quantity: 6 available Price: per piece -Dimensions: 460/180/H250 mm -Weight: 15 kg

geared motor, electric motor -Speed: 101 rpm -Power: 0.37 kW -Design: B5 -Shaft diameter: Ø 25 mm -Brake: 24 V -Protection class: IP 65 -Weight: 25 kg

geared motor, electric motor -Speed: 51 rpm -Power: 0.37 kW -Design: B5 -Shaft diameter: Ø25 mm -Brake: 24 V -Protection class: IP 65 -Weight: 28 kg

geared motor, electric motor -Speed: 41 rpm -Power: 0.37 kW -Design: B14 angle -Shaft diameter: Ø 30 mm -Brake: 24 V -Protection class: IP 65 -Weight: 29 kg

geared motor, electric motor -Speed: 133 rpm -Power: 0.55 kW -Design: B5 -Shaft diameter: Ø 25 mm -Brake: 24 V -Protection class: IP 65 -Weight: 32 kg

geared motor, electric motor -Speed: 121 rpm -Power: 0.75 kW -Design: B5 -Shaft diameter: Ø 25 mm -Brake: 24 V -Protection class: IP 65 -Weight: 30 kg

geared motor, electric motor -Speed: 36 rpm -Power: 0.75 kW -Design: B5 -Shaft diameter: Ø 30 mm -Brake: 24 V -Protection class: IP 65 -Number: 6x geared motors available Price: per piece -Weight: 36 kg

For sale is a Stamford LVSI 824 F2 generator with the serial number 0852287/01. This model was originally paired with a Jenbacher 616 engine with the design number B480. The generator has an output of 3,080 kVA at an output voltage of 690 V. The year of construction is 2013, the operating hours so far are 66,000. A Megger test was performed. The price of this generator is 15,000 euros. For more information or to arrange a viewing, please contact us.

geared motor, electric motor -Speed: 36.5 rpm -Power: 0.75 kW -Design: B5 -Shaft diameter: Ø 30 mm -Brake: 24 V -Protection class: IP 65 -Weight: 36 kg

geared motor, electric motor -Speed: 36.5 rpm -Power: 0.75 kW -Design: B5 -Shaft diameter: Ø 30 mm -Brake: 24 V -Protection class: IP 65 -Weight: 36 kg

geared motor, electric motor -Speed: 76 rpm -Power: 0.37 kW -Design: B5 -Shaft diameter: Ø 25 mm -Brake: 24 V -Protection class: IP 65 -Weight: 26 kg