134,083 used machines on RESALE, but how to find them? Machine Search
Scrubber dryer, floor cleaning machine, mopping machine, gearbox -Manufacturer: Gansow, drive axle with gear motor from scrubber drier 70 BF 85 -Motor: Gansow type MRP4DS 400 W 24 V 130 rpm -Dimensions: 610/250/H200 mm -Weight: 20 kg
Key data: 515 KW, 400 V
3 x Liebherr G9512 Natural Gas Generating Sets Hours: 0 HZ: 50 Scope of Supply: Engine, Alternator, Base Frame, Control Panel (MOTORTECH), Gas Line, Radiator, Exhaust. These sets are electricity only but can be adapted to work as CHP units. Available for sale from Gas Engine Exchange . Please check our full range of equipment at gasengineexchange.com.
Scrubber dryer, floor cleaning machine, mopping machine, gearbox -Manufacturer: Gansow, drive axle with gear motor from scrubber drier 70 BF 70 -Motor: Gansow type MRP4DS 400 W 24 V 130 rpm -Dimensions: 610/250/H200 mm -Weight: 20 kg
Scrubber dryer, floor cleaning machine, mopping machine, gearbox -Manufacturer: Gansow, drive axle with gear motor from scrubber drier 70 BF 70 -Motor: Gansow type 13509 367 W 24 V -Dimensions: 660/360/H250 mm -Weight: 51 kg
Vernier caliper, vernier caliper, vernier caliper -Manufacturer: CSE, tooth width caliper sprocket caliper with fine adjustment -Measurement scale: 0-40 / 0-60 mm -Vernier: on both sides -Dimensions case: 175/155/H30 mm -Weight.: 0.5 kg
Key data: 2866 KW, 6300 V
2 x Wartsila 16V25SG Combined Heat and Power (CHP) generators These engines were installed but only run for a short time. They have been kept in a heated location when not in use. Scope of supply: CHP generating set including Engine, Alternator, Base Frame, Control panel, Gas line. Notes: There are 2 Wärtsilä Generators and another one with a broken cylinder head that can be used for spares. Available for sale from Gas Engine Exchange . Please check our full range of equipment at gasengineexchange.com.
Hydraulically switchable gearbox for change of direction of rotationHydraulic reverse gear of latheYear of construction approx. 1985Alternating gearbox for fast change of direction of rotationClockwise or counterclockwise rotation- electric hydraulic pump for hydraulic pressure generation (380 volts, 0.25kW)- 2 pieces of solenoid valves for switching from left to clockwise rotation- equipped with pulleys 230 and 200 mm- was driven by a 15 KW drive motor, fast change of direction of rotation with high torque transmission- Drive motor always runs on the right, gearbox is hydraulically activated
Scrubber dryer, floor cleaning machine, mopping machine, gearbox -Manufacturer: Gansow, drive axle with gear motor from scrubber drier 70 BF 70 -Motor: Gansow type 11500 1000 W 24 V -Transmission: Flender ZF 12 -Dimensions: 660/260/H150 mm -Weight: 43 kg
Adjustable gearbox, variable speed gearbox, spindle gearbox, DISCO variable speed gearbox -Manufacturer: Lenze, DISCO adjustable gearbox -Type: 11 511 03 00 0 -Speed range: 1000-167 rpm for motors up to 0.37 kW / 1380 rpm -Dimensions: 228/163/H185 mm -Weight: 13 kg
Gear motor, electric motor, three-phase motor, electric gear motor -Manufacturer: Motovario, gear motor type NHRV -Speeds: approx. 100 rpm -Manufacturer motor: DRdrives type 63A-2 -Power: 0.18 kW / 2720 rpm -Hollow shaft: Ø 14 x 60 mm -Dimensions: 288/155/H125 mm -Weight: 5.3 kg
DC Motor, Servo Motor, Gear Motor, Electric Motor, DC Gear Motor -Manufacturer gearbox: SITI type MI 30 SI/D6 10/1 -Translation: 1:10 -Motor: Siboni type MT 10-3 36 V/ 58 W/ 2700 rpm -Hollow shaft: Ø 14 x 55 mm -Dimensions: 220/65/105 mm -Weight: 2.5 kg
Gear motor, electric motor, electric gear motor, bevel gear motor -Manufacturer: Nord, geared motor with brake -Type: SK 530SU-80S/4BRE8 -Speed: 93 rpm -Power: 0.55 kW / 1380 rpm -Shaft: Ø 25 x 45 mm -Protection class: IP54 -Brake: 8 Nm -Dimensions: 435/200/H240 mm -Weight: 21 kg
Gear motor, electric motor, electric gear motor -Manufacturer: SEW-Eurodrive, gear motor type SA37 DR63M4/TF/IS -Speed: 13 rpm -Power: 0.18 kW -Hollow shaft: Ø 20 x 100 mm -Protection class: IP55 -Dimensions: 340/180/H140 mm -Weight: 11 kg
Gear motor, electric motor, electric gear motor -Manufacturer: SEW-Eurodrive, gear motor type WA 30 DT71D4/IS -Speed: 29 rpm -Power: 0.37kw -Hollow shaft: Ø 20 x 100 mm -Protection class: IP54 -Number: 1x motor available -Dimensions: 340/145/H230 mm -Weight: 10.7 kg
Gear motor, electric motor, electric gear motor -Manufacturer: SEW-Eurodrive, gear motor type W20 DR63M4/TF/IS -Speed: 28 rpm -Power: 0.18kW -Shaft: Ø 20 x 40 mm -Protection class: IP55 -Dimensions: 300/180/H120 mm -Weight: 7.6 kg
Gear motor, electric motor, three-phase motor, electric gear motor -Manufacturer: STM, geared motor type RMI 50 D -Speed speeds: approx. 14 rpm i= 1/100 -Manufacturer engine: TeKell type M63B4 -Power: 0.187 kW / 1390 rpm -Shaft: Ø 24 x 90 mm -Dimensions: 210/215/H345 mm -Weight: 10 kg
Gear motor, electric motor, electric gear motor -Manufacturer: SEW-Eurodrive, geared motor -Type: RF43 DT90S4/TH i=19.15 -Speed: 73 rpm -Power: 1.1 kW -Design: B5 -Shaft: Ø 25 x 50 mm -Protection class: IP 54 -Dimensions: 500/200/H110 mm -Weight: 25 kg
Gear motor, electric motor, electric gear motor -Manufacturer: VEM, geared motor with brake -Type: ZG2 BMREB 80 K 4 -Speed: 80 rpm -Power: 1.1 kW -Design: B5 -Shaft: Ø 32 x 80 mm -Protection rating: IP 44 -Brake: 7.0 Nm -Dimension: 540/200/H260 mm -Weight: 33 kg
Gear motor, electric motor, electric gear motor -Manufacturer: VEM, geared motor type Z2 KRA 80.2/6 -Speed: 20 rpm -Power: 0.25 kW -Design: B3 -Shaft: Ø 28 x 60 mm -Protection rating: IP 44 -Dimension: 415/190/H250 mm -Weight: 23 kg
Column drilling machine GOTHABear power 30 mmSpindle holder MK 3 - long quill, throat depth 350 mmPine stroke 200 mmTable size 460 mmSpindle speed 160 - 750 rpm. 4 stepsFeed rate 0.1 - 0.2 - 0.3 mm/COLUMN diameter 160 mmMotor power 2.2 kWNerg connection 380 volts, 50 Hz- Spindle speed via 4 gear stages- Automatic feed- Rotatable drilling table with mechanical clamping- Table height adjustment via hand crank- Clamping surface at the machine foot 450 x 450 mmSpace required L x W x H 700
Gear motor, electric motor, electric gear motor -Manufacturer: VEM, geared motor type Z2 KR 80.1/8 -Speed: 16 rpm -Power: 0.15 kW -Design: B3 -Shaft: Ø 28 x 60 mm -Protection rating: IP 44 -Dimension: 415/190/H250 mm -Weight: 22 kg
Gears, spur gears, angular gears, worm gears -Manufacturer: Chiaravalli, worm gear type CHM 75 B14 unused in original packaging -Translation: i = 15 -Hollow shaft: Ø 28 x 120/60mm -Dimensions of cardboard: 200/160/H240 mm -Weigh: 8.5 kg
Column drill INFRATIREA - ORADEA type PH - 031Series. No. 02434 Year of construction 1975Drilling capacity 40 mmSpindle holder MK 4 - short quillThroat depth 320 mmQuill stroke 250 mmTable size 400 x 400 mmColumn diameter 160 mmSpindle speed 85 - 1500 rpm. 6 gear stagesMotor power 2.2 kWNet connection 400 volts, 50 Hz- Spindle speed via 6 gear stages- Clockwise and counterclockwise rotation- Automatic feed 0.10 - 0.16 - 0.25 - 0.4 mm/U- Drilling table swivelling- Table height adjustment via
Gears, spur gears, angular gears, worm gears -Manufacturer: Chiaravalli, worm gear type CH-04P NT unused -Translation: i = 10 -Hollow shaft: Ø 14 x 33 mm / 18 x 65 mm -Hole circle: Ø 87 x 9 mm -Dimension: 120/1285/H125 mm -Weight: 2.0 kg
Gears, spur gears, angular gears, worm gears -Gear: Worm gear, unfortunately unused without type designation -Translation: i = 40 -Hollow shaft: Ø 11 x 23 mm / 14 x 67 mm -Hole circle: Ø 87 x 9 mm -Quantity: 3x gears available -Price per piece -Dimension: 100/100/H115 mm -Weight: 1.2 kg
Key data: 3300 KW, 4125 kVA, 11000 V
Jenbacher 620 Gas Genset Containerized Complete Package - TURNKEY solution to your tailored energy need. Containerized Jenbacher 620 with 3.3 MW unit is available for immediate sale with 3.3 mW is available for sale. Why to procure the Jenbacher from us? No Lead Time Units available straightaway Opportunity to move quickly Scope of supply includes: Fully Enclosed Containerized System: The entire system is pre-assembled and housed in a sturdy, weather-resistant container, making transportation and installation hassle-free. • Exhaust Silencers: Designed to keep noise levels low without compromising performance, making the system perfect for urban and noise-sensitive areas. • Table Cooler Radiators: These are included to help maintain optimal operating temperatures and enhance the lifespan of the generator. • Fuel System & Electrical Conn ...
Key data: 2500 V, 11000
2 x Caterpillar G3520H Natural Gas Generating Sets Scope of supply: Engine, Alternator, Base Frame and boxes of ancillaries as delivered from Caterpillar as part of factory scope of supply. Complete engine inspection undertaken in july 2025. Turbo found to be in as-new condition. Cylinders found to be in as-new condition. Crankcase doors were removed to inspect crank and connecting rods, all found to be in as-new condition . Available for sale from Gas Engine Exchange. Please check our full range of equipment at gasengineexchange.com.
Gear motor, electric motor, electric gear motor -Manufacturer: ABM Baumüller, geared motor type HSG5DFR/44D8556A-4 -Speed: 24.5 rpm -Power: 0.09 kW 1350 rpm -Design: B5 -Shaft: Ø 10 x 20 mm -Protection rating: IP55 -Dimensions: 245/130/H145 mm -Weight: 4.2 kg
Key data: 87 V, 400
5 x Containerised Himonsia HGP-110 T5 LPG gensets Fuel: LPG Scope of supply: Engine, Alternator (Stamford), Control Panel, Bunded Tank, Charger, Heater, AMF Panel, Canopy. Available for sale from Gas Engine Exchange . Please check our full range of equipment at gasengineexchange.com.
Key data: 2400 KW, 3000 kVA, 400 V
Jenbacher 616 Gas Genset Containerized Complete Package - TURNKEY solution to your tailored energy need. Containerized Jenbacher 616 with 2.4 MW unit is available for immediate sale. This unit with 2.4 MW is available immediately for sale. Why to procure the Jenbacher from us? No Lead Time Units available straightaway Opportunity to move quickly Limited Scope of warranty available Here’s an overview of the Jenbacher 616 Gas Generator Set: • Output: 2.4 MW unit, making it ideal for medium-scale power generation or as a backup solution. • Voltage: 400 V, ensuring it integrates seamlessly with standard industrial and commercial grid systems. • Speed: 1500 RPM, providing efficient operation with minimal mechanical stress, suitable for various applications. • Condition: Brand New as remanufactured in 2023, ensuring top-ti ...
Geared motor, electric motor, electric geared motor, angular geared motor, automatic band saw -Manufacturer: Flender Himmel, geared motor -Gearbox: Type ZF 10 i= 18.064 -Speed: 78 rpm -Engine: ERY 0.18/4-7 1390 rpm -Shaft: Ø 20 x 50 mm -Dimensions: 380/200/H210 mm -Weight: 11.5 kg
Gear, gears, spur gear, spur gear -Manufacturer: PTI, gear, spur gear module 5 18 teeth -Type: M5 Z18 -Shaft holder: I pilot hole Ø 20 mm -Tooth width: 50 mm -Quantity: 2x gear available -Price per piece -Total dimensions: Ø 100 x 75 mm -Weight: 3.0 kg/pc.
Key data: 54 V, 400
2 x Containerised Himonsia HGO-70 T5 LPG gensets fos sale. HZ: 50 Fuel: LPG Scope of supply: Engine, Alternator (Stamford), Control Panel, Bunded Tank, Charger, Heater, AMF Panel, Canopy. Available for sale from Gas Engine Exchange . Please check our full range of equipment at gasengineexchange.com.
Key data: 2500 KW, 3125 kVA, 11000 V
Jenbacher 616 Gas Genset Containerized Complete Package - TURNKEY solution to your tailored energy need. Containerized Jenbacher 616 with 2.5 MW unit is available for immediate sale. 3 x units with 2.5 MW is available for sale. Why to procure the Jenbacher from us? No Lead Time Units available straightaway Opportunity to move quickly Limited Scope of warranty available Here’s an overview of the Jenbacher 616 Gas Generator Set: • Output: 2.5 MW unit, making it ideal for medium-scale power generation or as a backup solution. • Voltage: 11 kV, ensuring it integrates seamlessly with standard industrial and commercial grid systems. • Speed: 1500 RPM, providing efficient operation with minimal mechanical stress, suitable for various applications. • Condition: Brand New as remanufactured in 2023, ensuring top-tier performan ...
Gear motor, electric motor, electric gear motor, spur gear motor, gear motor with brake -Manufacturer: SEW-Eurodrive, geared motor type RF17 DT71D4 -Speed: 55 rpm / i= 25.23:1 -Power: 0.37 kW -Shaft: Ø 20 x 40 mm -Protection rating: IP54 -Dimensions: 380/200/H160 mm -Weight: 9,9 kg
BWT VT2000 Pure steam generator Serial: V16010 2016, BTW Vapotron VT2000, max output 2200 Kg/hour steam, with Elmo Rietschle vac pump, all mounted on stainless skid, two in stock
Key data: 200 KW, 250 kVA, 400 V
3x volvo penta canopy (silent)
Key data: 1257 KW, 1580 kVA, 400 V
Caterpillar 3512-B STD Serial No.: 8EM00341 1257KW 1580 kva stamford 400volt 50hz & 60hz possible scope: genset on frame and alternator control panel small accessories
Gear motor, electric motor, electric gear motor, spur gear motor, gear motor with brake -Manufacturer: Lenze, geared motor type GST04-2M VCK 071C32 -Speed: 44.6 rpm / Torque: 77 Nm -Power: 0.37 kW -Shaft: Ø 20 x 40 mm -Protection rating: IP55 -Dimensions: 395/200/H160 mm -Weight: 11.7 kg
Gear motor, electric motor, electric gear motor -Manufacturer: SEW-Eurodrive, geared motor -Type: SA77 DAS90S4/TF/IS -Speed: 1450/6.4 rpm i= 225.26 -Power: 0.55 kW -Hollow shaft: Ø 50 x 190 mm -Dimensions: 550/280/H300 mm -Weight: 69 kg
An emergency power generator with a diesel engine is available. 1) 2-cylinder V-engine, power: 290HP, speed: 1000rpm, dry weight: 4000kg. 2) Synchronous generator ELIN S2506, power: 250kVA. 3) Control cabinet ELIN. 4) Compressed air system. Includes spare parts for the valve train, sealing systems, etc. Documentation available. An on-site inspection is possible.
Gear motor, electric motor, electric gear motor -Manufacturer: SEW-Eurodrive, geared motor -Type: KA37 DAS80N4/TF/IS -Speed: 1400/91 rpm i= 35.57 -Power: 0.37 kW -Hollow shaft: Ø 30 x 120 mm -Protection rating: IP66 -Dimensions: 490/120/H210 mm -Weight: 22 kg
Gear motor, electric motor, electric gear motor -Manufacturer: SEW-Eurodrive, geared motor -Type: KA37 DRN80M4/RS/TF/AL -Speed: 1435/24 rpm i= 58.60 -Power: 0.55 kW -Hollow shaft: Ø 30 x 120 mm -Protection rating: IP55 -Dimensions: 480/210/H170 mm -Weight: 22 kg
Gear motor, electric motor, electric gear motor -Manufacturer: SEW-Eurodrive, geared motor -Type: KA37 DAS100M4/TF/IS -Speed: 1445/41 rpm i= 35.57 -Power: 1.1 kW -Hollow shaft: Ø 30 x 120 mm -Protection rating: IP66 -Dimensions: 600/162/H255 mm -Weight: 43 kg
for sale 2 MWM year 2010 hours 42 000 complete container installations
maximum number of results exceeded
please refine your search
