ge healthcare used for sale

Key data: 170000 KW

Fully Equipped Diesel Power Plant – Over 170 MW Capacity This opportunity is not yet on the market — and won’t be found anywhere else. Contact us now to receive exclusive details and position yourself ahead of the market before the sale is public. END USERS ONLY

Gear motor, electric motor, three-phase motor, electric gear motor -Engine manufacturer: VEM -Manufacturer gearbox: VEM -Speed: 50 rpm -Power: 1.4 kW -Construction: B5 -Diameter shaft: 48 mm -Protection class: IP 54 -Number: 1x motors available -Price: per piece -Dimensions: 620/250/H280 mm -Weight: 45 kg

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 4.3 rpm -Power: 0.55 kW -Diameter shaft: Ø 55 mm -Construction: B3 -Protection class: IP 55 -Dimensions: 690/285/H450 mm -Weight: 95 kg

Stock number: D513, Vacuum screw conveyor, stainless steel,, Gerivac., Ø 150 x 2250 mm screw., 4 hp gear motor, adjustable speed., 22,5 - 158 rpm., Material: Stainless steel AISI 304, Dimensions: Ø 150 x L 2250 mm.

Stock number: A051, Scraped heat-exchanger, stainless steel,, Gerstenberg & Agger,, type Labo Perfektor 1x57 B/L,, 4 zones., Material: Stainless steel AISI 304

Stock number: D1115, Loader, stainless steel,, GEA/Scanio type K16., For lift and unloading of max 1.000 kg. vats,, height of unloading 2500 mm., Outer dimensions D 1800 x W 2500 x H 3950 mm., Without safety cabinet., Material: Stainless steel AISI 304

Stock number: D1112, Electric steam generator,, Dampheks 1 DH type 1A 39., 39 kW., Capacitet 52 kg steam/hour at 6 bar., Condensation container and, feed pump excluded.

Stock number: SF171, Gel press filter column, stainless steel,, type Dan-process., Hanging in tiltable stand,, air controlled press cylinder at the top., Product filter in the bottom,, Ø 300 x H 1000 mm. column., Material: Stainless steel AISI 304

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 670 rpm -Power: 0.26 kW -Design: B3 -Diameter shaft: 25 mm -Protection rating: IP 54 -Quantity: 1 piece available -Dimensions: 215/170/H420 mm -Weight: 17.3kg

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 18 rpm -Power: 0.18 kW -Construction: B3 -Diameter shaft: Ø 20 mm -Protection class: IP 33 -Dimensions: 355/182/H175 mm -Weight: 13 kg

Geared motor, electric motor, three-phase motor, electric geared motor -Speed: 108 rpm -Power: 0.75 kW -Design: B3 -Shaft diameter: Ø 20 mm -Protection class: IP 54 -Brake -Number: 1x motor available Price: per piece -Dimensions: 425/210/H180 mm -Weight: 20 kg

Stock number: SF015, Dynamic axial compression flow-through bed, stainless steel,, type Dan-Process,, hanging in tiltable rack., Air driven pressing cylinder in the top., Product filter in the bottom., Ø 200 x H 900 mm column., Material: Stainless steel AISI 304

Stock number: PT1067, Gear pump, stainless acid proof steel,, ECO type GM4-KCT-KKS., 0,25 kW motor, 910 rpm.,, 220/380 volt., Ø 1/2 connections,, theoretical capacity 400 l/h., Material: Stainless acid proof steel AISI 316

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 41 rpm -Power: 0.12 kW -Construction: B3 angle -Diameter shaft: 9 mm -Protection class: IP 21 -Dimensions: 210/150/H135 mm -Weight: 2 kg

Milling axes, dividers, grinding wheels, High: 1765 mm, Tall: 1765 mm, Weight: 2500 Kg, Width: 1100 mm, Long: 2570 mm, Ø tool: 250 mm, Total power: 7.5 kva., Ø of the grinding wheel: 250 mm, Travel of table: 400 mm, Height of points: 125 mm, Height of centers: 125 mm, Max. Ø to be sharpened: 250 mm, Power wheel motor: 3 Kv., Manufacturing number: 1905.04, Ø max to sharpen: 250 mm, Grinding wheel motor power: 3 Kv., Distance between points: 635 mm, Table tour: 400 mm, Revolutions of the wheel: 1750/2150/2850 mm, Length between points: 635 mm, Maximum length to sharpen: 400 mm, Revolutions of the grinding wheel: 1750 / 2150 / 2850 mm, Radial travel axis wheelhead: +35 / -65 mm, Maximum length to be sharpened: 400 mm, Vertical travel of the wheel: 175 mm, Vertical travel of the grinding wheel: 175 mm, Radial travel of the grinding wheel shaft: +35 / -65 mm, Cone holder shaft clamping pi ...

Geared motor, electric motor, three-phase motor, electric geared motor -Speed: 70 rpm -Power: 0.55 kW -Design: B3 -with brake -Shaft diameter: Ø 25 mm -Wave height: 90 mm -Protection class: IP 54 -Dimensions: 470/200/H160 mm -Weight: 20 kg

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 98 rpm -Power: 0.75 kW -Design: B5/B14/B3 angle -Diameter shaft: 20 mm -Protection class: IP 54 -Number: 1x motors available -Price: per piece -Dimensions: 440/260/H160 mm -Weight: 18 kg/piece

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 55 rpm -Power: 0.25 kW -Construction: B5/B14 -Diameter shaft: 25 mm -Protection class: IP 54 -Number: 2x motors available -Price: per piece -Dimensions: 440/140/H185 mm -Weight: 12.5 kg/piece

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 50 rpm -Power: 0.37 kW -Design: B5/B14/B3 angle -Diameter shaft: 20 mm -Protection class: IP 54 -Number: 2x motors available -Price: per piece -Dimensions: 405/250/H170 mm -Weight: 14.5 kg/piece

adjustable gear motor, variable speed gear motor, electric motor -Motor power: 0.75 kW -Speed range: 17 to 102 rpm -Motor: adjustable -Construction: B3 -Diameter shaft: 22 mm -Dimensions: 480/450/H200 mm -Weight: 38 kg

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 33 rpm -Power: 0.37 kW -Construction: B5 -Diameter shaft: Ø 20 mm -Protection class: IP 55 -Price: per piece -Number: 2x available -Weight: 13 kg

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 283 rpm -Power: 0.37 kW -Construction: B3 -Diameter shaft: Ø 16 mm -Protection class: IP 54 -Price: per piece -Number: 2x available -Weight: 10.8 kg

Geared motor, electric motor, three-phase motor, electric geared motor -Speed: 206 rpm -Power: 1.1 kW -Design: B8 -Shaft diameter: Ø 25 mm -Protection class: IP 54 -Dimensions: 470/250/H200 mm -Weight: 23 kg

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 50/60 rpm -Power: 0.12 kW -Construction: angle -Diameter shaft: Ø 16 mm -Protection class: IP54 -Number: 3x motors available -Price: per piece -Dimensions: 255/155/H155 mm -Weight: 8 kg

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 378 rpm -Power: 0.75 kW -Construction: B8 -Diameter shaft: Ø 25 mm -Protection class: IP 54 -Dimensions: 430/145/H180 mm -Weight: 17.5 kg

DC Motor, Servo Motor, Gear Motor, Electric Motor, DC Gear Motor -Speed: 30-3000 rpm -Power: 0.15-15kW -Type: B5 -Diameter shaft: Ø 60 mm -Protection class: IP 44 -Number: 1x available -Dimensions: 1340/360/H580 mm -Weight: 282 kg

Angular gear for heating basins for edge banders, edge banding machines, melting unit with granulate container -Manufacturer: Homag -Nummer: 3 pieces available -different designs -Price: per piece -Dimensions: 300/170/H190 mm -Weight: 16.8 kg

Gearboxes, angular gearboxes, stin gearboxes, angular gearboxes, transmission gears -Translation: 1:2 -Drive shaft: Ø 20 mm -Dimensions: 190/190/H110 mm -Weight: 11.7 kg

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 180 rpm -Power: 0.75 kW -Construction: B5 -Diameter shaft: Ø 25 mm -Protection class: IP 54 -Number: 1x motors available -Price: per piece -Dimensions: 470/200/H160 mm -Weight: 18.8 kg

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 178 rpm -Power: 0.75 kW -Construction: B5 -Diameter shaft: Ø 25 mm -Protection class: IP 54 -Number: 2x motors available -Price: per piece -Dimensions: 480/150/H200 mm -Weight: 18.8 kg

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 46 rpm -Power: 0.12 kW -Construction: angle -Diameter shaft: Ø 16 mm -Protection class: IP54 -Number: 2x motors available -Price: per piece -Dimensions: 250/160/H150 mm -Weight: 6.5 kg

Geared motor, electric motor, three-phase motor, electric geared motor -Speed: 59 rpm -Power: 0.37 kW -Design: B5 -Shaft diameter: Ø 25 mm -Protection class: IP 55 -Number: 2x motors available -Price: per piece -Dimensions: 335/175/H160 mm -Weight: 11.6 kg

Angular gear for heating basins for edge banders, edge banding machines, melting unit with granulate container -Manufacturer: Homag -Dimensions: 440/185/H240 mm -Weight: 30 kg

DC motor, servo motor, gear motor, electric motor, direct current gear motor -Speed: 30-3000 rpm -Power: 0.07-7.5 KW -Construction: B5 -Diameter shaft: Ø 50 mm -Protection class: IP 44 -Number: 1x motors available -Price: per piece -Dimensions: 1160/370/H530 mm -Weight: 222 kg

Geared motor, electric motor, three-phase motor, electric geared motor -Speed: 137 rpm -Power: 0.37 kW -Design: Angle hollow shaft -Shaft diameter: Ø 19 mm -Protection rating: IP54 -Dimensions: 290/140/H200 mm -Weight: 10 kg

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 59 rpm -Power: 0.18 kW -Construction: B5 -Diameter shaft: Ø 25 mm -Protection class: IP 55 -Number: 2x motors available -Price: per piece -Dimensions: 330/160/H160 mm -Weight: 10 kg

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 121 rpm -Power: 1.5 kW -Construction: B3 -Brake -Diameter shaft: Ø 25 mm -Protection class: IP 54 -Dimensions: 530/230/H210 mm -Weight: 35 kg

Geared motor, electric motor, three-phase motor, electric geared motor -Speed: 178 rpm -Power: 0.75 kW -Design: B5 -Shaft diameter: Ø mm -Protection class: IP 54 -Dimensions: 480/150/H200 mm -Weight: 30 kg

Gear motor, electric motor, three-phase motor, electric gear motor -Speeds: 130 rpm -Power: 0.12 kW -Construction: B5 angle -Diameter shaft: Ø mm -Protection class: IP 54 -Weight: 5 kg

Gear motor, electric motor, three-phase motor, electric gear motor -Speeds: 440 rpm -Power: 0.12 kW -Construction: B5 angle -Diameter shaft: Ø 9 mm -Protection class: IP 54 -Weight: 3.3 kg

Gear motor, electric motor, three-phase motor, electric gear motor -small output shaft speeds: 1290 rpm -Diameter shaft: Ø 11 mm -Hollow shaft output shaft speeds: 91 rpm -Diameter shaft: Ø 19 mm -Power: 0.25 kW -Construction: angle hollow shaft -Protection class: IP 44 -Dimensions: 320/160/H180 mm -Weight: 14.5 kg

Geared motor, electric motor, three-phase motor, electric geared motor -Speed: 109 rpm -Power: 3 kW -with brake: 24 V -Design: B5 -Shaft diameter: Ø 40 mm -Protection class: IP 54 -Dimensions: 850/300/H300 mm -Weight: 91 kg

Gear motor, angular gear motor, electric motor, electric gear motor, three-phase motor -Angular gear motor -Motor power: 0.55 kW -Speed: 48 rpm -Pulley: Ø 170 mm -Construction: B5A -Shaft diameter: Ø 20 x 30 mm -Dimensions: 430/250/H190 mm -Weight: 19.6 kg

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 60 rpm -Power: 0.10 kW -Construction: B3 angle -Diameter shaft: Ø 10 mm -Protection class: IP 44 -Dimensions: 245/130/H110 mm -Weight: 3.8 kg

Gearbox, spur gear -Translation: 1:14 -Drive shaft: Ø 28.7 mm -Output shaft: Ø 44.2 mm -Dimensions: 420/320/H280 mm -Weight: 77 kg

gear, gears, spur gear -Gear: Spur gear 30 teeth -Shaft mounting: Inner Ø 42 mm -Dimensions: see photos -Overall dimensions: Ø 80 x 60 mm -Weight: 0.9 kg

Gear motor, electric motor, electric gear motor -Motor: FIMEA type LR 71 b4 -Gearbox: 21 rpm, with oil level indicator -Power: 0.37 kW -Voltage: 220/380 volts -Hollow shaft: Ø 24 x 100 mm -Protection class: IP54 -Brake: 380 v -Dimensions: 470/160 / H195 mm -Weight: 19 kg

Gear motor, electric motor, electric gear motor, bevel gear motor -Manufacturer: SEW-Eurodrive, gear motor type K37 DR63L4/BR/TF -Speed: 19 rpm -Power: 0.25kw -Shaft: Ø 25 x 50 mm -Protection class: IP54 -Brake: 3.2 Nm -Dimensions: 450/230/H170 mm -Weight: 22 kg

Gearboxes, spur gears, bevel gears, worm gears -Manufacturer: Stöber, Gearbox type C002NO 105MQ10 -Translation: i 10,297 -Drive shaft: Ø 20 x 40 mm -Dimensions: see photo technical drawing -M2 perm: 43 Nm / n1= 3000 rpm -Dimensions: 240/140/H155 mm -Weight: 9.1 kg