ge healthcare used for sale

Gear motor, electric motor -Speed: 40 rpm -Power: 0.8kw -Construction: B3 -Diameter shaft: O 28 mm -Protection class: IP 44 -Number: 1x available -Dimensions: 410/190/H260 mm -Weight: 26kg

Geared motor with brake VEM Z1 BR 71.1/4 M301 0.25 kW 40 rpm 220 / 380 V IP44 Shaft diameter: Ø 24 mm Flange diameter: Ø 160 mm New !' Dimensions: 355 x 160 x 250 mm

Gear motor, electric motor, electric gear motor -Speed: 80 rpm -Power: 0.37 kW -1x design: B5 -1x design: B3 -Diameter shaft: 22 mm -Protection class: IP 54 -Price: per piece -Number: 2x available -Dimensions: 365/138/H200 mm -Weight: 12.8 kg

Gear motor, electric motor, electric gear motor -Speed: 10 rpm -Power: 0.15 kW -Construction: B5 angle -Diameter shaft: 20 mm -Protection class: IP 44 -Brake -Dimensions: 420/265/H160 mm -Weight: 14.8 kg

Gear motor, electric motor, electric gear motor -Speed: 4 rpm -Power: 0.18 kW -Construction: B3 -Diameter shaft: 40 x 110 mm -Protection class: IP 54 -Dimensions: 600/280/H270 mm -Weight: 48 kg

Gear Motor HANNING ELEKTRO-WERKE 2B00682 G8A84 ( 2B00682G8A84 ) 0.18 / 0.25 kW 69 / 140 rpm 380 V shaft diameter: Ø 19 mm 2 speeds !' used, tested !' Dimensions: 315 x 210 x 150 mm

Gear motor, electric motor, electric gear motor -Speed: 17 rpm -Power: 0.18 kW -Construction: B3 -Diameter shaft: 20 mm -Protection class: IP 54 -Price: per piece -Number: 2x available -Dimensions: 410/230/H190 mm -Weight: 21.6 kg

Gear motor, electric motor -Transfer in current condition as seen -Foot is broken on one side -Speed: 9 rpm -Power: 0.15 kW -Construction: B3 -Diameter shaft: Ø 24 mm -Protection class: IP 54 -Dimensions: 410/190/H155 mm -Weight: 16 kg

Gear Motor with Inverter and Brake SEW S67 DT80N4/BMG/MM07/MFP ( S67DT80N4 / BMG / MM07 / MFP ) < br /> MOVIMOT MM07C-503-00 0,0,0,0 15 / 0.75 kW 5.1 / 26 rpm 380 - 500 V IP54 shaft diameter: Ø 35 mm with control (MOVIMOT) ! used, tested ! Dimensions: 560 x 250 x 260 mm

Aprovis FriCon Gas Dehumidifier and Desulfurizer Plant for cleaning Biogas. Biogas cleaning plant including APROVIS FriCon 150/500-40-15-2-I0 Gas Dehumidifier and Desulfurizer Plant. Type: ESA 44,8m³ Year: 2019 Fuel: Biogas Scope of supply: Gas Cooler, Air Cooled Liquid Chiller, Base Frame for Gas Dehumidifier, Insulation, Demister DN 200, Syphon. Technical data for Desulfuriser Plant: >3.000 mg/m 3 H 2 S and 600 Bm³/h Gas flow: 600 Bm³/h (at around 37-40 o C) H 2 S-Input concentration: 2.000 ppm (3,000 mg/m³) Gas temperatures (entrance): 25-40 o C H 2 S load: maximum 1.800 g/h Columns pressure loss: < 3-8 mbar Pressure level: 45 mbar (Test pressure 50 mbar) Low pressure: maximum –10 mbar. Minimum inlet pressure: 2-4 mbar Hot water: DN=32 Dung use: app. 3,0 kg per day full load (approx. 110-115 Ct costs 1 kg) Extra air: 11-14 % Container/tank size: approx. ...

Gear motor, electric motor, electric gear motor -Speed: 26.5 rpm -Power: 0.18 kW -Construction: B3 -Diameter shaft: 20 mm -Protection class: IP 33 -Price: per piece -Number: 2x available -Dimensions: 385/210/H215 mm -Weight: 18.3 kg

Geared motor with brake BAUER BG10X-11/D09SA4W-TH/EKK008B4HA/C1-SP 0.37 kW 64 rpm 400 V IP65 shaft diameter: Ø 25 mm brake mounted !' used, tested !' Dimensions: 620 x 230 x 180 mm

Geared motor, electric motor, electric geared motor -Speed: 216 rpm -Power: 0.33 kW -Design: B3 -Shaft diameter: 20 mm -Protection class: IP 33 -Dimensions: 385/220/H200 mm -Weight: 20.5 kg

Gear motor, electric motor, three-phase motor -Connection: 400/230 volts -Power: 0.45 kW -Rotation speed -Construction: B5 angle -Diameter shaft: Ø 10 mm -Protection class: IP 54 -Number: 2x motors available -Price: per piece -Dimensions: 190/160/H100 mm -Weight: 2.5 kg

Gear motor, electric motor, electric gear motor -Speed: 6 rpm -Power: 0.37 kW -Construction: B3 -Diameter shaft: 40 mm -Protection class: IP 65 -Number: 1x motors available -Price: per piece -Dimensions: 675/260/H245 mm -Weight: 47 kg

Gear Motor, DC Gear Motor CARL CLOOS KG TGN 94-60 ( TGN94-60 ) Gearbox: Z5N 024140000 0,0,0 17 kW 142 rpm armature voltage: 31.5 V DC field voltage: 34.0 V DC shaft diameter: Ø 17 mm Flange diameter: Ø 80 mm used, tested ! Dimensions: 285 x 160 x 130 mm

Gear motor, electric motor, three-phase motor -Fan cover: defective -Power: 0.18 kW -Speed: 162.5 rpm -Hollow shaft: Ø 19 mm -Construction: -Protection class: IP 54 -Number: 5x motors available -Price: per piece -Dimensions: 240/1147/H150 mm -Weight: 5.9 kg

Gear motor, electric motor, three-phase motor -Power: 0.18 kW -Speed: 162.5 rpm -Hollow shaft: Ø 19 mm -Construction: -Protection class: IP 54 -Number: 1x motors available -Price: per piece -Dimensions: 240/1147/H150 mm -Weight: 5.9 kg

Geared motor, electric motor, three-phase motor -Speed: 87/106 rpm -Power: 0.37 kW -Design: B3 -Shaft diameter: Ø 20 mm -Protection class: IP 54 -Number: 6x motors available -Price: per piece -Dimensions: 370/188/H155 mm -Weight: 9.5 kg

Geared motor with brake VEM ZG2 BMREB 71 G 8-4 ( ZG2BMREB71G8-4 ) 0,0,0 22 / 0.4 kW 25 / 50 rpm 380 V 3AC IP44 shaft diameter: Ø 32 mm clutch with sprocket Ø 72 mm, 17 teeth spare part for Hohenstein RBT400 ! Two speeds! used, tested ! Dimensions: 620 x 210 x 250 mm

Engine: Jenbacher Works 4T6S Generator: 725kW Diesel powered We installed the unit in a 20-foot container a few years ago. It is fully functional and working. Find more here - .ucymachines/ Contact us at - sales@ucymachines

Gear Motor VEM ZG3/1 KMRA 63 G 4 ( ZG3/1KMRA63G4 ) 0,0,0 37 kW 8.0 rpm 220 / 380 V IP 44 shaft diameter: Ø 48 mm flange diameter: Ø 250 mm used, tested ! Dimensions: 680 x 290 x 245 mm

Key data: 850 KW

2 X MTU 8V 4000 L63 Trigeneration Plants Hours: 34,000 Year: 2013 Fuel: NAT GAS Control Panel: MTU Capacity: 2 X 850kW Voltage: 400 HZ: 50 Service History: At 21,000 hours, major maintenance was performed relating to: pistons, liners, turbo overhaul, and intercooler replacement. At 42,000 hours, another maintenance is scheduled identical to the 21,000-hour one + connecting rod replacement. At 31,500 hours, the generator was overhauled with bearing replacement. The "exchange" overhaul is scheduled at 63,000 hours. STOPPED IN MARCH 2024 Scope of supply: Complete Trigeneration Plant. The trigeneration plant consists of two endothermic engines fueled by methane gas, each having the following main characteristics: • Chemical power input 2,130 kW • Electrical power 849 kW • Engine jacket heat recovery 511 kW at 78/90°C • Diathermic oil boiler from exhaust ...

Gear motor, electric motor -Speed: 453 rpm -Power: 0.55 kW -Construction: B3 -Diameter shaft: Ø 25 mm -Brake: 24 V -Protection class: IP 65 -Dimensions: 500/250/H230 mm -Weight: 33 kg

Geared motor with brake VEM ZG1 BMRZ 63 K4 ( ZG1BMRZ63K4 ) 0.25 kW 31.5 rpm 220 / 380 V IP44 shaft diameter: Ø 28 mm Flange diameter: Ø 160 mm used, tested ! Dimensions: 470 x 160 x 240 mm

Gear motor, electric motor -Speed: 32/65 rpm -Power: 0.2/0.4 kW -Construction: B5 -Diameter shaft: Ø 25 mm -Brake: 24 V -Protection class: IP 65 -Price: per piece -Number: 5x available -Dimensions: 560/250/H220 mm -Weight: 32 kg

Gear motor, electric motor, electric gear motor -Speed: 56 rpm -Power: 0.55 kW -Construction: B3 -Diameter shaft: 25 mm -Protection class: IP 33 -Weight: 24 kg

Gear motor, electric motor -Speed: 29.5 rpm -Power: 0.25 kW -Construction: B3 -Diameter shaft: Ø 20 mm -Brake: 380 V -Protection class: IP 65 -Number: 2x motors available -Price: per piece -Dimensions: 460/200/200 mm -Weight: 22 kg

Gear motor, electric motor -Speed: 127/254 rpm -Power: 0.55/0.9 kW -Construction: B3 -1x shaft diameter: Ø 25 mm -3x shaft diameter: Ø 24 mm -Protection class: IP 54 -Number: 4x engines available -Price: per piece -Dimensions: 560/270/H240 mm -Weight: 43 kg

Gear motor variable / adjustable with brake and slip hub GETRIEBEBAU NORD SK65SR15080L/4 0.74 kW 12 - 34 rpm (counted) adjustable by handwheel 220 / 380 V 3AC IP33 with right-angle gear SK65SVR150 used, tested ! Dimensions: 500 x 470 x 250 mm

Key data: 600 KW

After E70 about 4000h only walked. If you are interested, please contact us via WhatsApp at 004915229184328.

Gear motor, electric motor -Speed: 19 rpm -Power: 0.4 kW -Construction: B3 -Diameter shaft: Ø 40 mm -Protection class: IP 33 -Height shaft axis: 200 mm -Dimensions: 530/250/H295 mm -Weight: 56 kg

Gear motor, electric motor -Speed: 56 rpm -Power: 0.8 kW -Construction: B3 -Diameter shaft: Ø 40 mm -Protection class: IP 33 -Dimensions: 500/240/H295 mm -Weight: 50 kg

Geared motor with brake SEW USOCOME R40DT63L 4B03 / HR ( R40DT63L4B03/HR ) 0.25 kW 74 rpm 220 / 400 V IP55 Shaft diameter: Ø 25 mm New ! Dimensions: 420 x 170 x 180 mm

CHANGE GEARS

AVK generator , alternator 2840 kva 400volt year 2008

Gear motor, electric motor, electric gear motor -Speed: 315 rpm -Power: 0.075 kW -Construction: B3 -Diameter shaft: 20 mm -Protection class: IP 54 -Price: per piece -Number: 3x available -Dimensions: 380/200/H210 mm -Weight: 19 kg

Gear motor, electric motor, electric gear motor -Speed: 18/2 rpm -Power: 0.55 kW -Design: B3 -Shaft diameter: 30 mm -Protection class: IP 44 -Brake: 24 V -Quantity: 1x available -Dimensions: 660/260/H230 mm -Weight: 40 kg

Gear pump, Lubrication pump, single-flow, internally mounted ORSTA A 1.0/16 TGL 17-747401 V: 1.0 m3/h p: 1.6 Mpa ( 16 bar ) n: 1450 rpm Pk: 0.92 kW shaft: Ø 12 / 14 mm, length: 30 / 32 mm groove width: 4 mm pump base: 110 x 77 mm hole spacing: 92 / 55 mm hole diameter: Ø 6.5 mm used, tested ! Dimensions: 185 x 100 x 115 mm

Gear motor, electric motor, electric gear motor -Speed: 21.5 rpm -Power: 0.75 kW -Construction: B5 -Diameter shaft: 40 mm -Protection class: IP 65 -Number: 1x motors available -Price: per piece -Dimensions: 600/250/H285 mm -Weight: 49 kg

Gear motor, electric motor, three-phase motor -Speed: 0.16 rpm -Power: 0.12 kW -Construction: B3 -Diameter shaft: Ø 40 mm -Protection class: IP 54 -Price: per piece -Number: 2x available -Dimensions: 640/250/H240 mm -Weight: 42 kg

Gear motor, electric motor -Speed: 0.5 rpm -Power: 0.05 kW -Construction: B3 -Diameter shaft: Ø 40 mm -Protection class: IP 33 -Dimensions: 675/260/H290 mm -Weight: 59 kg

Gear Pump, Hydraulic Pump REXROTH, BOSCH AZPF-11-008RAB1MG 0510 425 044 ( 0510425044 ) pressure: max. 280 barbar volume: 8 cm3/revolution speed: max. 400 rpm shaft diameter: Ø 18 mm wavelength: 30 mm groove width: 6 mm flange: Ø 80 / 125 x 90 mm hole spacing: 100 / 72.5 mm New ! Dimension: 127 x 90 x 125 mm

Geared motor, electric motor, three-phase motor, right-angle gear motor -Speed: 25 rpm -Power: 0.6 kW -Voltage: 500 VOLT Y -Design: B3 -Shaft diameter: Ø 38 mm -Protection class: IP 44 -Price: per piece -Quantity: 2 available -Dimensions: 490/250/H290 mm -Weight: 39 kg

Gear motor, electric motor, electric gear motor -Speed: 19 rpm -Power: 0.18 kW -Construction: B3 -Diameter shaft: 30 mm -Protection class: IP 54 -Price: per piece -Number: 2x available -Dimensions: 530/250/H220 mm -Weight: 31 kg

Gear motor, electric motor -Speed: 100 rpm -Power: 3 kW -Design: B5 -Diameter shaft: Ø 48 mm -Protection rating: IP 44 -Quantity: 1 piece available -Dimensions: 700/250/H320 mm -Weight: 57 kg

Wheel Pump, Hydraulic Pump MARZOCCHI 0,0,0 25 D 24 ( 0.25D24 ) 26 cm3 / U max. 190 - 230 bar max. 7000 rpm Shaft diameter: Ø 6 mm Shaft length: 16 mm Groove width: 2 mm Shaft threaded hole: M6 x 1.0, Length: 8 mm Flange: 80 x 50 mm hole spacing: 66 mm hole diameter: Ø 7 mm New ! Dimensions: 80 x 76 x 50 mm

Gear motor, electric motor -Speed: 50 rpm -Power: 2.2 kW -Design: B5 -Diameter shaft: 40 mm -Flange diameter: 250 mm -Diameter recess: 180 mm -Protection class: -No nameplate -Quantity: 1x motors available -Dimensions: 700/280/H300 mm -Weight: 63kg

Gear motor, electric motor -Speed: 11 rpm -Power: 0.18 kW -Brake: 380 V -Construction: angle B3 -Diameter shaft: Ø 25 mm -Protection class: IP 65 -Weight: 20 kg

geared motor, electric motor -Speed: 81 rpm -Power: 1.1 kW -Design: B3 -Shaft diameter: Ø 25 mm -Protection class: IP 54 - Price: per piece -Quantity: 1 available -Dimensions: 490/250/H220 mm -Weight: 35 kg