ge healthcare used for sale

Overview This Labeling Machine was built in 2005 by Gernep. It was in operation in a fruit juice plant in Germany till 01/2022. In this company it was only used in single-shift operation for about 100 days a year, which is why the condition of the machine is still very good. Tech Specs: Capacity: 6,000 bph at 1L bottles Number of aggregates: 2 Accessories: Formats for 1.0 l VdF glass bottles, 0.7 l VdF, 0.2 l glass bottles goiter neck Various spare parts included

Overview The GM Gera NAGEMA Arcade DS bottle washer was previously used in a brewery. There it was operated in single-shift operation. Since the sales volume has decreased, the beer of the brewery is now bottled at another location and this bottling line has become available. Due to the low number of operating hours and regular maintenance, the machine is in a very good condition. All basins and the machine body are made of stainless steel. Spare parts, such as bottle cells, are also still available. Furthermore, the main drive shaft, as well as the motor and gearbox were overhauled by SEW in 2018 and the carrier chain was replaced in 2015. The machine is still mounted and can also be demonstrated. Tech Specs: Capacity: 23,000 bph Cell pitch: 85 Bottles per row: 16 Dimensions + weights with attachments: 8640 x 4470 x 1920 mm / 17,900 kg Details: Standard drives Heating with steam Operati ...

Overview The bottle washer was previously used in a brewery. Due to the complete reconditioning in 2005 and continuously maintentance, the machine is in very good condition. All basins and the machine body are made of stainless steel. The machine is already disassembled and dry stored, so that it can be easily loaded and transported.  Tech Specs: Capacity: 6,700 bph Cell Pitch: 102 mm Bottles per row: 10 Dimensions + Weights: Housing: 7,200 x 1,300 x 2,850 mm / 13,500 kg Ready for operation with attachments: 7,790 x 3,450 x 2,950 mm / 20,000 kg YOM 1999 Formats: 0,33l 0,5l The Machine in Detail / Equipment Features: Heated by steam Pre Cleaning and removal of residual liquids by pulsed rinsing prior to washing CE certified Chemical Dosing Pumps Machine data sheet included High pressure pre rinsing Rotating Spray nozzles Single End Machine Label discharge rear right Finger discharge + ...

Overview The bottle washer was previously used in a mineral water factory. Due to the good maintenance, the machine is in good condition. All basins and the machine body are made of stainless steel. The machine is still working and will be free in early 2027, when the complete line is replaced. Tech Specs Capacity: 15,500 bph Cell Pitch: 95mm Bottles per row: 16 Dimensions + Weights: Housing: 8350 x 1,860 x 2,990 mm / 21,750kg Ready for operation with attachments: 8,700 x 3,560 x 3,330mm / 37,639kg YOM 2005 Formats: 0,5l 0,75l The Machine in Detail / Equipment Features Heated by steam Pre Cleaning and removal of residual liquids by pulsed rinsing prior to washing CE certified Chemical Dosing Pumps Machine data sheet included Rotating Spray nozzles Single End Machine Label discharge rear right Label press mounted to the machine Finger discharge + finger feed Bottle cells made of plastic C ...

Secure available Doka Floor Prop shoring props for professional concrete and construction projects 🚀 These well-maintained used shoring props in 3 ⭐ condition deliver high load capacity, immediate jobsite readiness, and efficient site operations — ideal for contractors looking for reliable slab formwork and professional construction material without long lead times 🔥   The proven Doka post shores are perfect for fast concrete cycles, efficient jobsite workflows, and cost-effective construction projects focused on productivity and performance ⚡   🔹 Premium used shoring props in very well-maintained condition 🔹 Ready for immediate jobsite use & available from stock 🔹 Proven Doka formwork quality for professional applications 🔹 Short-term availability from Florida, USA 🔹 Packaging costs ...

Secure available Doka H20 top N beams 2.65 m for professional formwork and concrete construction projects 🚀 These proven Doka formwork beams offer high load capacity, versatile applications, and maximum compatibility with common slab formwork and wall formwork systems. Ideal for construction companies and formwork professionals looking for reliable used formwork components with immediate availability 🔥   The Doka H20 top N beams are trusted on construction sites worldwide and form the basis of numerous formwork solutions in building construction, civil engineering, and infrastructure projects. Thanks to their robust design, they provide a cost-effective solution for companies looking to expand existing formwork inventories or source additional beams for ongoing projects ⚡   🔹 Doka H20 top N beams 2.65 m 🔹 Proven formwork beams  ...

🔧 Doka Adjustable Strut 220 IB †Excellent Used Condition 🔧   ✅ Application: The 220 IB strut is used as the lower bracing for the 540 IB element prop. ✅ Quality: Each strut is individually inspected and fully functional . ✅ Condition: Shows signs of careful use , but completely reliable . ✅ Delivery: Struts are delivered on stackable pallets . (⚠ Pallet not included in the price per piece)   💡 Summary: Durable Doka material in excellent condition †ready for your next construction project! 🚧 ❓ If you have any questions or need more information, feel free to contact us! 📞✉️ Price: from € 58,40 / PCS (excl. VAT). Partial quantity: possible Subject to prior sale Classified 3-star Serviced & ready to use. Professionally cleaned condition. Used formwork & scaffolding suit ...

🔩 Staxo 100 †Used Shoring Frames in Top Condition! 🔩   Looking for stable, reliable, and ready-to-use Staxo 100 frames ? You’ve come to the right place!  Our used, galvanized shoring frames in 3-star quality have been professionally inspected, cleaned , and are ready for action †with only minor signs of use but maximum performance!    Why choose our Staxo 100 frames? ✅ Integrated access ladders †climb with ease!  ✅ Non-removable connection elements †stack smartly!  ✅ Suitable for medium to high loads †built to perform!    Available in two sizes: 📏 1.20m †for maximum reach! 📏 0.90m †compact & powerful!   💡 Get your hands on quality-tested shoring frames with smart technology today!  👉 Questions? We’re happy to help! P ...

Cream separator (Skimmer). Self cleaning. Machine comes with the bowl, motor (22 kW), motor cover, base plate with feet, cyclone, water valves (original Westfalia), control panel, all inlet/outlet pipes with pumps, flow indicator, manometer, manual counter pressure valve, service tools for maintenance including pressing tool and some spare parts., Additional features:, Mechanical overhaul done at 83.031 hours in 2022. Bowl overhaul done at 85.478 hours. Last oil change done at 85.996 hours. Current hour meter: 86.374 hours., Type of Machine: Cream Separator / Skimmer, Capacity: 15.000 liter per hour, Bowl speed: 4.500 rpm, Motor: 22 kW - 380 V - 42,5 A - 1.460 rpm - 50 Hz - 3 Ph, Operating hours: 86.374 hours, Year of refurbishing: 2022, Weight: 2.150 kg, Dimensions: 190 x 110 x 220 cm

Secure this available Layher Blitz scaffolding package with 100 m² of scaffold area for professional façade, renovation, and construction projects 🚀 This proven Layher façade scaffolding system delivers fast assembly, high stability, and maximum cost-efficiency — ideal for companies looking for high-quality used scaffolding , reliable construction material , and immediately available stock 🔥   This complete package is based on the original Layher Blitz frame scaffolding system and includes durable decks, access platforms with integrated ladder access, bracing diagonals for structural stability, and base jacks for safe leveling on uneven surfaces. Thanks to the standardized 2.57 m bay length, the system is fully expandable and completely compatible with original Layher Blitz components ⚡   The easy handling, fast erection and dism ...

Secure approximately 840 m² of Layher Blitz façade scaffolding available now 🚀 Packages of this size are rarely available and offer an excellent opportunity for scaffolding contractors, construction companies, and resellers looking to expand their inventory quickly and cost-effectively 🔥   With approximately 840 m² of scaffold area and a 1.09 m system width , this package is ideal for façade projects, major construction sites, renovations, or expanding existing scaffold inventories. The package includes frames, U-decks (partially with access openings), guardrails, diagonals, toe boards, and base jacks, all based on the proven Layher Blitz frame scaffolding system ⚡   Particularly attractive is the quality mix ranging from 0 Star to 3 Star condition , offering a competitive entry price and strong potential for refurbishment, resale, or economic ...

Secure approximately 64 m² of PERI DOMINO wall formwork as a complete package with immediate availability for professional building construction, civil engineering, and concrete construction projects 🚀 This compact PERI DOMINO formwork package offers construction companies and formwork professionals an ideal opportunity to expand existing formwork inventories cost-effectively or quickly increase formwork capacity for ongoing projects 🔥   The package consists primarily of 1 Star quality material . In addition, it includes selected elements in 0 Star quality as well as one item in 2 Star quality . The proven PERI DOMINO wall formwork system stands out for its low weight, easy handling, and outstanding flexibility on site. At the same time, it provides a cost-effective alternative to higher-graded material and is ideal for expanding existing PERI DOMINO invento ...

Secure this available Layher Blitz façade scaffolding package with 100 m² of scaffold area 🚀 This used Layher scaffolding package is the ideal solution for contractors, construction companies, and renovation projects where functionality, cost-efficiency, and immediate availability are the top priorities. Perfect for businesses looking to benefit from proven Layher quality while keeping project costs under control 🔥   With 100 m² of scaffold area , this package provides a cost-effective solution for façade work, renovations, maintenance projects, and a wide range of construction applications. The complete package is based on the original Layher Blitz frame scaffolding system and includes access platforms, bracing diagonals, guardrails, decks, frames, and base jacks †all fully compatible with the original Layher Blitz system ⚡   This used s ...

Connected load: 11.5kW, rated voltage: 380/220 V, rated current: 25 A, control voltage: 24 V, upstream fuse: 35 A, operating hours: 56,780 h. Equipment: Complete machine assembly, Machine base, Workpiece magazine, Linear transfer system, Hydraulic feed unit (Stations I-IV): Version F, Option X, Hammering unit (Stations I+II): HE 17/D, Three-jaw version, Hammering unit (Stations III+IV): HE 17/E-D, Hydraulic feed unit (Station V): VS 29/200, Version F, Option X, Hammering unit, Cutting tool, Pump drive, Coolant system, Central lubrication system, Including hydraulic circuit diagram, Equipment list, Functional diagram, Electrical schematic. An on-site inspection is possible.

💥 You’re working with the PERI bracket platform system MXK ? Then this offer is made for you: We’re selling a complete set of certified original PERI bracket decks †accurate fit, durable and ready to go. 💸 Perfect for anyone looking to buy PERI MXK plankings or upgrade their existing system. 🔩 What’s included: ✅ Original PERI parts †no replicas ✅ Lengths: 0.90   m | 1.20   m | 2.40   m ✅ Material: Aluminium-wood combination ✅ Certified and ready to use ✅ Safely bundled on transport supports 💡 Ideal for concreting and intermediate platforms with PERI MAXIMO. 💸 Total price: €1,699 †only while stock lasts. ⏳ First come, first build. Secure your package now †this offer won’t come twice. 🛒 Get in touch today and ...

Operating hours: 59,018h, Equipment: Workpiece magazine, Linear transfer system, Station I: Swaging unit HU 15/VE, 4-die version, Stations I+II: Hydraulic feed unit VS 29/200, Version G, Station II: Swaging unit HE 17-V, Station III: Rotary station DS 19, Station III: Cutting tool SW 2, Station III: Hydraulic feed unit VS 29/200, Version A, Hydraulic pump drive, Cooling unit KE 33, Cooling unit KE 15, Central lubrication system, Documentation available, Operating manual, Oil specification, Maintenance and lubrication instructions, Hydraulic schematic HP 361, Hydraulic functional diagram, Hydraulic spare parts list, Electrical schematic with parts list Stp. 484, General assembly drawing. An on-site inspection is possible.

Secure available Hünnebeck RASTO wall formwork for professional concrete and construction projects 🚀 This premium package of RASTO corner panels and RASTO formwork panels stands out with its very well-maintained condition, immediate jobsite readiness, and efficient site operations — ideal for companies looking for reliable wall formwork and professional construction material with short-term availability 🔥   The proven Hünnebeck RASTO systems are perfect for fast assembly processes, efficient concrete operations, and flexible formwork cycles. This professional used wall formwork delivers proven quality, strong availability, and an attractive price-performance ratio ⚡   🔹 Premium used wall formwork in very well-maintained condition 🔹 Package includes RASTO corner panels & RASTO formwork panels 🔹 Ready for imm ...

Secure available Manto shaft corners for professional shaft construction, utility, and civil engineering projects 🚀 This premium used shaft formwork in 3 ⭐ condition stands out with its very well-maintained appearance, immediate jobsite readiness, and efficient site operations — ideal for contractors and infrastructure professionals looking for reliable construction material without long lead times 🔥   The proven Manto shaft corner systems are perfect for fast shaft assembly, cost-efficient civil engineering applications, and efficient formwork cycles on site. This professional used formwork delivers flexible application options and supports fast, economical project execution ⚡   Companies looking to buy used formwork benefit from proven quality, short-term availability, and an attractive price-performance ratio directly from availab ...

Distance between centers: 600mm, center height: 140mm, max. swing diameter: 275mm, max. workpiece weight overhung/between centers: 30kg/100kg, feed X/Z: 8m/min, workhead spindle taper: MK4, tailstock taper: MK4, tailstock quill travel: approx. 35mm, grinding wheel dimensions: 400mm/50mm/127mm, grinding spindle speed: 1425rpm, internal grinding spindle speed: 16800rpm, max. internal grinding wheel diameter: 100mm, filter volume: 300l, filter capacity: 100l/min, chuck diameter: 160mm, operating hours: approx. 350h. Including chuck, magnet and dressing device. Machine dimensions X/Y/Z: approx. 3000mm/2700mm/2050mm, weight: approx. 4500kg. Documentation available. An on-site inspection is possible.

Equipment: Base frame, pump drive, hydraulic oil capacity, coolant system, lubrication oil capacity, central lubrication system, control panel channel, workpiece magazine, linear transfer system, hammer unit, cutting tool, hydraulic feed unit, hydraulic control system, electrical control system, operating hours: 77,107h. Documentation available. On site inspection is possible.

2-SHAFT SHREDDER 1.250 mm.90 kW, for waste of plastics, WEEE, light metals, cables, tyres, bulky waste and more, This is a versatile 2-shaft shredder, a new machine engineered to offer the best possible results in size reduction of various materials., Constructed entirely in Italy, according to the latest safety regulations with top quality materials and components., Reliable, evergreen, economic when compared to other EU brands of same quality, this machine comes from our long experience in size reduction of differente waste materials., Post-sale assistance is available with us and our 24/7 on whatsapp.., n.2 x 1.250 mm long shafts, 13-15 tpm Shredding chamber :1.250 x 900 mm, Electric motors 2 x 45kw (or bespoke to project), planetary gearboxes, grease lubrication, inverter for reverse movement on pre-settable threshold, n.12 knives in sturdy steel, 100 mm.thick, 2 hooks (for plastics, ...

Equipment: Base frame, pump drive, coolant system, central lubrication system, control panel channel, workpiece magazine, feeding unit, linear transfer system, hammer unit, stations I to IV, hammer unit HE0, station V, cutting tool, hydraulic feed unit VS29/200, version F and X, hydraulic control system, electrical control system, hydraulic oil capacity: 175 l, lubrication oil capacity: 60 l, operating hours: 55,349h. Documentation available. On site inspection is possible.

A complete GEW UV curing system for a Gallus Labelmaster LM 440 is offered. Max. UV output: 140W/cm, UV lamp housings: 11, including 9 housings with lamps and 2 housings for screen printing modules, Operating hours: approx. 2900h/lamp, HMI: for 10 stations, Control system: GEW RHINO HMI. Including 2 RHINO control cabinets, 2 fans, a complete exhaust duct system and mounting kit for the Gallus Labelmaster LM 440. An on-site inspection is possible.

Made in sturdy painted carbon steel or AISI 304 stainless steel, drained or covered,.. Customized to your project, just send us your sketch with length, inner and outer diameter, drive, configuration or share your project with us and we will offer you the best solution.

The GEA Westfalia SA 35-01-076 is used in the butter oil industry as a continuous, self-cleaning centrifugal separator that polish the butteroil after the product is concentrated by a concentration separator., Machine comes with the bowl, motor (18,5 kW), base plate with feet, cyclone, water valves, all inlet/outlet pipes with pumps, service tools for maintenance and a big lot of spare parts., Additional features:, � ��Excluding:, - Motor cover., - Control panel., This separator is part of a butteroil production and purification process. The process flow is illustrated in the attached P&IDs and flowcharts., Butterfat is first melted and conditioned in the T100 process. During melting, citric acid is added at a dosage of 0,5 kg per 1.000 kg of butterfat. The melted product is then transferred thro ...

CONVEYOR BELTS SYSTEM to load scraps onto shredder or granulator, 1st conveyor, made to open the bale and manually separate materials, width 1.200 mm., length 5.000 mm. horizontally set, plain belt which can be either in PVC or RUBBER,, supporting structure made in sturdy carbon steel with short walls, Adjustable speed (average 15 m/min, 2nd coveyor, meant to lift pre-selected material onto the machine, width 1.200 mm, length 5.500 mm 30°inclination, Belt can be either in PVC or RUBBER, fishbone orwith draggers, supporting structure made in sturdy carbon steel, side walls 500-700 mm high, Adjustable speed (average 60 m/min, These machines are prepared to be connected to an existing electric panel to be synchronized with the main machine, availability: 3-5 months from drawing confirmation, working width: 1200 mm., options available: different angle, size, bekt material,..

Description Item #8857 – HOMOGENISER Manufactured by GEA NIRO SOAVI Model Ariete NS2006 L Energy Current owner purchased refurbished by GEA in 2013 original year believed to be 2006 suitable for pharma products MAX Viscosity UP TO 500 cP MAX Working Pressure 1500 bar Flow Rate Type F F = Fixed MAX Flow Rate 35 L/h @ 50 Hz MIN Feed Pressure 4-5 bar MAX Backpressure 5 bar MAX Product Temperature

Key data: 1250 mm, 1 mm

Qty. 1 Second-hand cut-to-length line including straightening, polishing and grinding units Manufacturer: UNGERER / GEORG, EMG, IMEAS Built: 1986 / 1997 /1998 / 2009 still in operation Material: stainless steel Strip width: 500 – 1.250 mm Thickness: 0.40 – 1.00 mm Coil weight – DECOILER max.: 10.0 t RECOILER max.: 5.0 t Coil ID – Ø 500 mm OD – Ø 1.500 mm Sheet length: 500 – 6.000 mm Stacking weight max.: 4.000 kg Working speed – grinding max. 20 m/min. Working speed – grinding + brushing: 4 – 12 m/min. Working speed – brushing: 4 – 6 m/min. Working speed – cutting max.: 20 m/min. Working direction right ⇒ left Length tolerance ± 0.40 – 3.000 mm

honing diameter: 80 mm stroke: 280 mm throat: 300 mm total power requirement: 6 kW weight of the machine ca.: 2,6 t Honing Ø 10 - 100 mm Max. honing depth, approx. 250 mm Max. spindle stroke 260 mm Distance between spindle and column 300 mm Mounting height 1,000 mm Table size 350 x 500 mm Height of table above floor 500 mm Spindle speeds in 2 steps, infinitely variable, approx. 85 - 300 rpm 170 - 600 rpm Stroke speed, infinitely variable, hydraulic 0 - 23 m/min Spindle drive 2 kW Total electrical load 6 kW - 380 V - 50 Hz Weight 2,600 kg Accessories / Special Features Built-on 2-station tilting table which accommodates 2 workpieces. Mechanical workpiece clamping, using a manual lever. Hydraulic infeed of the tool. Switch-off via timer. Air measuring device (probably). Honing oil unit. Various splash shields, etc. Condition : Good. Machine can be in ...

saw blade diameter: 300 mm cutting diameter: 100 mm capacity 45 degrees: flat: 105 x 80 mm capacity 45 degrees: round: 100 mm capacity 60 degrees: flat: 80 x 70 mm capacity 60 degrees: round: 90,0 mm dimensions of saw-blade: 300 x 2,5 x 40 mm hole of sawblade: 40,0 mm stroke: 150 mm cutting speed: 17 + 33 U/min voltage: 400 V weight: 340 kg range L-W-H: 1000 x 800 x 1600 mm Features: - Machine cabinet with built-in coolant system - Vertical saw head guide - 2 speeds - Very large work surface and turntable - Mitre adjustment on both sides: 60° to the left / 45° to the right - Clamping vise with lateral quick-adjustment and double clamping arm - Precise prism guide for the gear head - Operatorâs manual The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

taper MK: MK5 round table: ja weight of the machine ca.: 1.200 kg Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Geho ZD 900 in sound-damped housing with Hatz 1D81Z diesel engine. The ZD900 piston pump is designed for vertical and horizontal dewatering. These positive displacement pumps are self-priming and extremely suitable for pumping a mix of water and air without any restrictions. In addition, these pumps can run dry without any worries, without causing damage or wear to parts. Can be delivered in any desired coupling/connection MAX 95m/h MAX: 20 MWK Several pieces in stock Please call or email us, we are happy to help you. Additional information: FEATURES - Very quiet noise level - 47 dB(A) at 10 meters - Diesel engine 1D81Z - Easy access to motor and pump - Stackable thanks to sturdy integrated stacking corners - With forklift tubes for easy transport BENEFITS - Small and light, large in capacity, efficiency and lifespan - Very quiet, 47 dB(A) at 10m. - All panels/doors are made of galvanize ...

This diesel-powered GEHO ZD 300 double-acting piston pump in a soundproofed casing has the great advantage, compared to its big brothers, of its light weight and compactness. The great efficiency of the ZD 300 ensures an enormous capacity., Feel free to call or email us for the possibilities., , Throughput capacity: 35 m3/h, Motor brand: Hatz, Max. head: 20 MWK, Max dirt passage: 1500 rpm, Weight: 895 kg, , = More information =, , Year of manufacture: 2025, Applicable material: Water, Empty weight: 895 kg, Technical condition: very good, Visual appearance: very good, Price: On request, Please contact Gert-Jan Kruitbosch (+31648061001, sales@vantongerentrading.nl) or John van Tongeren (+31620537017) for more information, , = Dealer information =, , Interested? We would be happy to make you an excellent offer! Send an email to sales@vantongerentrading.nl or call +31(0)55-3125902., , Do you ...

The legendary GEHO ZD900: Built for the future., Why choose the Electric GEHO ZD900?, Zero Emissions: The perfect solution for projects with strict environmental regulations (urban areas and nature reserves)., Unrivaled Efficiency: With a hydraulic efficiency of over 90%, this is the most energy-efficient choice., Low Maintenance, Self-Priming & Dry-Run Safe: The ZD900 effortlessly handles both water and air, reaching a vacuum of up to 9.6 meters., Technical Specifications:, Power: High-performance 400V electric motor., Capacity: Max. 95 - 100 m³/h., Max. Discharge Head: 20 mwc (2 bar)., Controls: Equipped with a heavy-duty industrial control box., The GEHO ZD-series has been the industry standard for 60 years. With this electric 400V version, you combine proven reliability with today’s technology., , Throughput capacity: 95 m3/h, Max dirt passage: 0 mm, Max. head: 20 MWK, Max dirt pa ...

bore capacity in steel (diameter): . mm throat: . mm bore stroke: . mm The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

material: Stahl Dimensions (L/W/H): verschieden mm Racks made of steel for rings or flanges up to 5500 diameter The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 870 mm turning length: 3000 mm control: Siemens type: 810 mm bed width: 620 mm turning diameter over slide: 560 mm 3 jaw chuck Forckrath: 630 mm type: 3KTN 630 total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software ...

weight max.: 5 t stroke: 7000 mm clamping width: 17508 mm Height: . mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m 68 Overhead travelling crane Demag hoist Test log available. The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max.: 5 t stroke: 7000 mm clamping width: 10000 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m 38 Hubwerk Demag Inspection book available. The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

honing diameter: 40-420 mm stroke: 15-6500 mm centre height: 520 mm workpiece length: 6500 mm workpiece dia.: 1000 mm steady: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

honing diameter: 160 mm stroke: 3025 mm centre height: 325 mm workpiece length: 3000 mm workpiece dia.: 600 mm steady: spindle drive: 32-250 U/min stroke speed: 0-20 m/min total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solu ...

centre height: . mm total power requirement: . kW weight of the machine ca.: . t dimensions of the machine ca.: m partial table V80184#102 The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 1450 mm turning diameter over slide rest: 1000 mm turning length: 8000 mm spindle bore: 160 mm turning speeds: 2,8-560 U/min faceplate: 1400 mm 3-jaw chuck: mm bed width: 850 mm turning diameter in the gap: 1800 mm length of gap: 600 mm steady: 1070 mm steady: 1070 mm steady: 650 mm Rapid travel: chip conveyor: kW digital readout: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Multifix steel holder with inserts The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business ...

Technical data Type: SESOTEC Genius+ GO Search coil dimension: 700x300mm Product dimensions: 600x265 (wxh in mm) Conveyor belt length: 2,000mm Conveyor belt width: 600mm Conveyor belt height: 900+/-50mm Basic search sensitivity: FE: 1.2mm; NFE: 1.5mm; SUS: 2.0mm Search frequency: Multi-frequency Year of construction: 2026 Special features: New device Conveyor belt: link chain Conveying speed: variable Motor: Gear Motor Connection: 230V / 50Hz Excretion: Alarm and Stop Operating side: left in the direction of conveying Accessories: Paper documents

Technical data Type: SESOTEC Genius+ GO Search coil dimension: 700x400mm Product dimensions: 600x365 (wxh in mm) Conveyor belt length: 2,000mm Conveyor belt width: 600mm Conveyor belt height: 900+/-50mm Basic search sensitivity: FE: 1.5mm; NFE: 2.0mm; SUS: 2.5mm Search frequency: Multi-frequency Year of construction: 2026 Special features: New device Conveyor belt: link chain Conveying speed: variable Motor: Gear Motor Connection: 230V/50HZ Excretion: Alarm and Stop Operating side: left in the direction of conveying Accessories: Paper documents

Technical data Type: SESOTEC GLS Genius+ Search coil dimension: 500x150mm Product Dimensions: 440x115mm (LxH) Conveyor belt length: 1,500mm Conveyor belt width: 440mm Conveyor belt height: 800+/-100mm Basic search sensitivity: FE: 0.8mm / NFE: 1.0mm / SUS: 1.2mm Year of construction: 2024 Special features: new conveyor belt Conveyor belt: Gleiderkette Conveying speed: variable Motor: Gear Motor Connection: 230V / 50 Hz Excretion: Alarm and Stop Operating side: left in the direction of conveying Accessories: 1 set of test rods

Bactofuge (Bacterial removing separator). Self cleaning. Machine comes with the bowl, motor (37 kW), motor cover, baseframe with feet, manometer on in / outlet, control panel (upgraded by Centrimax with Siemens S7 PLC and CE labelling) and several service tools for maintenance. It was working till the end of the production of the former dairy., Additional features:, Excluding:, - Water valves., - Sludge tank / cyclone., - Counter pressure valve., Type of Machine: Bacterial-Removing Centrifuge (Bactofuge), Capacity: 25.000 liter per hour, Bowl speed: 4.700 rpm, Motor: 37 kW

Cream separator (Skimmer). Self cleaning. Machine comes with the bowl, motor (11 kW), base plate, feet, control panel, water valves, inlet and outlet pipes and service tools for maintenance., Additional features:, Excluding:, - Motor cover., Type of Machine: Cream Separator / Skimmer, Capacity: 5.000 - 7.000 liter per hour, Bowl speed: 6.520 rpm, Motor: 11 kW - 380 V - 50 Hz - 1460 rpm, Weight: ± 1.300 kg

Kronen GEWA5000 V, Washing machine GEWA 5000V PLUS with vibration outfeed (product outfeed over vibration screen) for bigger capacities, for example approx. 600-2500 kg per hour, depending on the product., Efficient and gentle washing of lettuces, vegetables and fruit by means of adjustable water rotation.

If you are looking for a reliable and quick response contact for your spare parts, at Dairy Machinery UK we offer a large variety of Spare Parts for the below manufactures. Keeping our ongoing assistance with our customers we have achieved best prices for genuine Spare Parts Directly From Manufactures ., Spare parts from these manufacturers, Alfa Laval Spare Parts, Tetra Pak Spare Parts, GEA Westfalia Spare Parts, GEA Tuchenhagen Spare Parts, GEA Hilge Spare Parts, GEA Niro Soavi Spare Parts, GEA Aseptomag Spare Parts, Fristam Spare Parts, Pentair Südmo Spare Parts, APV Gaulin Spare Parts, APV Rannie Spare Parts, SPX Spare Parts, Stephan Spare Parts, Karl Schnell Spare Parts, Benhil Spare Parts, Corrazza Spare Parts, Trepko Spare Parts, Ilpra Spare Parts, Grundfoss Spare Parts, Lowara Spare Parts, Arsopi Spare Parts, HST Spare Parts, Buschjost Spare Parts, Samson Spare Parts, Sumitomo S ...