ge healthcare used for sale

Three-phase motor, electric motor -Manufacturer: Loher, electric motor type eA 180 MA-4 Ex-protected -Power: 15 kW -Speed: 1460 rpm -Voltage: 380/500 V see photos nameplate -Shaft: Ø 48 x 110 mm -Protection class: IP44 -Number: 2x motor available -Price per piece -Dimensions: 650/430/H350mm -Weight: 156 kg/pc.

Radial fan, dust extraction fan, fan, extraction, dust blower, blower, exhaust fan -Dust extraction fan: radial fan -Motor: Loher type eAL 100L2B-4 2.5 kW 1420 rpm Ex protected -Volume flow: m³/h -Number: 2x fan available -Price per piece -Dimensions: 730/730/H730mm -Weight: 92 kg/pc.

Platform trolley, transport trolley, heavy-duty trolley, table trolley, assembly trolley, industrial trailer, container dolly, double turntable steering, heavy-duty trailer -Heavy-duty transport vehicle: Industrial trailer with 2-axle steering, suspended -Platform: 1800/950/H590 mm -Load capacity: 3 t -Tires: 305/415x90 -Drawbar: reversible, trailer coupling on both sides -Total dimensions: 2820/950/H590 mm -Weight: 362 kg

Platform trolleys, transport trolleys, heavy-duty trolleys, table trolleys, assembly trolleys, industrial trailers, container dollies, heavy-duty trailers, hand trucks -Handover: in current condition as viewed -Note: Note condition of wheels/platform -Heavy-duty transport vehicle: hand platform truck with 1-axle turntable steering, suspended -Platform: 1000/620/H380 mm -Load capacity: 1.5 t -Tires: Ø 255 x 70 mm solid rubber -Total dimensions: 2070/620/H380 mm -Weight: 98 kg

Platform trolleys, transport trolleys, heavy-duty trolleys, table trolleys, assembly trolleys, industrial trailers, container dollies, heavy-duty trailers, hand trucks -Handover: in current condition as viewed -Note: Note condition of wheels/platform -Heavy-duty transport vehicle: hand platform truck with 1-axle turntable steering, suspended -Platform: 1000/660/H340 mm -Load capacity: 1.5 t -Tires: front Ø 240 x 60 mm / rear Ø 240 x 75 mm solid rubber -Total dimensions: 2020/660/H340 mm -Weight: 87 kg

fan heater, heater, heat exchanger, air heater, air heater, duct air heater, duct air heater, heating register -Manufacturer: GEA Happel, air heater heat exchanger -Type: 4124/403/441 -Power: kW -Nominal air output: approx. 2800 m³/h -Fan: Ziehl-Abegg -Operating pressure: max 13.7 bar -Number: 2x air heaters available -Price: per piece -Dimensions: 885/550/H600 mm -Weight: 90 kg/piece

fan heater, heater, heat exchanger, air heater, air heater, duct air heater, duct air heater, heating register -Manufacturer: GEA Happel, air heater heat exchanger -Type: 4114/403/441 -Fan: Ziehl-Abegg -Operating pressure: max. 13.4 bar -Number: 2x air heaters available -Price: per piece -Dimensions: 710/550/H495 mm -Weight: 60 kg/piece

cutter head, milling holder, carbide cutter, indexable insert cutter, face milling head, milling head, cutter head shell milling cutter, face milling cutter, corner milling cutter -Manufacturer: Gewefa Sandvik Coromant, face milling cutter head 4 pieces -Type: Ø 100/110/140/160 mm various versions, see photos -Adapter: SK50x40x40 -Delivery/Price: complete -Transport dimensions. 280/270/H230mm -Weight: 31.7 kg

cutter head, milling holder, carbide cutter, indexable insert cutter, face milling head, milling head, cutter head shell milling cutter, face milling cutter, corner milling cutter -Manufacturer: Gewefa Sandvik Coromant, face milling cutter head 5 pieces -Type: 1x Ø100 / 2x Ø125 / 2x Ø160 mm different versions, see photos -Adapter: SK50x40x40 -Delivery/Price: complete -Transport dimensions. 280/270/H230mm -Weight: 40 kg

Radial fan, dust extraction fan, fan, extraction, dust blower, blower, exhaust fan -Dust extraction fan: radial fan -Motor: VEM 3,6 kW 1430 U/min Ex protected -Fan wheel: Ø 580 x 180 mm -Connection: inlet Ø 395 mm -Connection: Output 280 x 485 mm -Dimensions: 825/670/H825 mm -Weight: 118 kg

Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston, tilting cylinder, lifting cylinder -Manufacturer: GSL (German Standard Lift), hydraulic cylinder stroke 480 mm -Type: E030ZM2 R 16 -Piston rod: Ø 30 mm -Hole: Ø 24 mm -Dimensions: 545/82/H60 mm -Weight: 6 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, tilting cylinders, lifting cylinders -Manufacturer: GSL (German Standard Lift), Hydraulic cylinder: 480 mm -Type: E030ZM50479 S 49 -Piston rod: Ø 30 mm -Hole. Ø 20 mm -Number: 3x cylinders available -Price: per piece -Dimensions: 605/100/H80 mm -Weight: 6.8 kg/piece

Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston, tilting cylinder, lifting cylinder -Manufacturer: GSL (German Standard Lift), double-acting hydraulic cylinder with valve block -Type: D040025AAV10140 T08 -Stroke: 140 mm -Piston rod: Ø 25 mm -Receiver. Ø 20 mm / Hole spacing 320 mm -Dimensions: 360/200/H80 mm -Weight: 7.6 kg.

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, tilting cylinders, lifting cylinders -Manufacturer: GSL (German Standard Lift), double-acting hydraulic cylinder -Type: D120050AAV30290 S46 -Stroke: 290 mm -Piston rod: Ø 50 mm -Hole diameter 50 mm / hole spacing 530 mm -Dimensions: 610/145/H220 mm -Weight: 38 kg.

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, tilting cylinders, lifting cylinders -Manufacturer: GSL (German Standard Lift), double-acting hydraulic cylinder -Type: D0630320LV2S01 -Stroke: 95 mm -Piston rod: Ø 32 mm -Hole diameter 30 mm / hole spacing 290 mm -Dimensions: 340/117/H105 mm -Weight: 8 kg.

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, tilting cylinders, lifting cylinders -Manufacturer: GSL (German Standard Lift), hydraulic cylinder stroke 280 mm -Type: E030ZM60279 T18 -Piston rod: Ø 30 mm -mount. Ø 19 mm -Dimensions: 395/83/H70 mm -Weight: 4.4 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, tilting cylinders, lifting cylinders -Manufacturer: GSL (German Standard Lift), double-acting hydraulic cylinder -Type: D120050AAV70290 -Stroke: 290 mm -Piston rod: Ø 50 mm -Pipe Ø outside: 135 mm -Hole diameter 50 mm / hole spacing 530 mm -Dimensions: 610/145/H240 mm -Weight: 38 kg

linear drive, linear gear, lifting gear, spindle drive, linear axis, linear rail, linear guide, electric spindle drive -Manufacturer: Geze, spindle drive type E250/24V-DC EV 1 Ovp -Ident.-No.: 16 473 -Stroke length: 300 mm -Network: 24 V DC -Shaft: Ø 20 mm -Number: 2x linear drive available -Price: per piece -Dimensions box: 670/60/H45 mm -Weight: 1.8 kg/piece

linear drive, linear gear, lifting gear, spindle drive, linear axis, linear rail, linear guide, electric spindle drive, electric linear drive, window drive -Manufacturer: Geze, electric linear drive type E212R/230V-AC Ovp -Ident.-No.: 05428 -Stroke length: 42-66 mm -Network: 230 V DC -Shaft: Ø 20 mm -Number: 1x linear drive available -Dimensions box: 230/100/H50 mm -Weight: 1.0 kg

Lifting tipper, forklift tipping container, tipping container, tipping trough, forklift trough, -Manufacturer: holac, tilting device made of stainless steel -Use: for food or food industry with height-adjustable tilting function -Set tilting height: 2000 mm (can be changed to max. approx. 2500 mm for an additional charge) -Total height: 2960 mm -Individual components/dimensions: see photos -Transport dimensions: 2960/600/H1630 mm -Weight: 470 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, tilting cylinders -Manufacturer: GSL (German Standard Lift),,Hydraulic cylinder single-acting stroke 280 mm -Type designation: E030ZM3 R 01 -Piston rod: Ø 30 mm -Hole: Ø 20 mm, see photos -Number: 2x cylinders available -Price: per piece -Dimensions: 350/75/H76 mm -Weight: 3.8 kg/piece

Electric motor, three-phase motor -Manufacturer: Thurm, electric motor type KR 80 1/4 Ex-protected -Power: 0.5 kW -Speed: 1400 rpm -Shaft: Ø 16 x 40 mm -Design: B3 -Protection class: IP 44 -Number: 2x motor available -Price: per piece -Dimensions: 265/155/H215 mm -Weight: 12.3 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, tilting cylinders, lifting cylinders -Manufacturer: GSL (German Standard Lift), double-acting hydraulic cylinder -Type: D120050AAV90185 -Stroke: 185 mm -Piston rod: Ø 50 mm -Hole diameter 40 mm / hole spacing retracted 415 mm -Dimensions: 485/160/H145 mm -Weight: 29.1 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, tilting cylinders, lifting cylinders -Manufacturer: GSL (German Standard Lift), single-acting hydraulic cylinder, stroke 170 mm -Type: E0400180H30020 T17 -Piston rod: Ø 18 mm -Tube: outside Ø 50 mm -Hole: Ø13 mm -Dimensions: Ø 50 x 275 mm -Weight: 2.9 kg

three-phase motor, electric motor -Manufacturer: Flender ATB-Loher, electric motor explosion-proof -Type DNGW-225MB-04R -Power: 45 kW -Speed: 1475 rpm / Inverter operation 145 - 1475 rpm -Shaft: Ø 60 x 105 mm -Protection class: IP55 -Design: B3 -Number: 2x motor available -Price: per piece -Dimensions: 900/450/H655 mm -Weight: 411 kg/pc.

Incremental encoder with solid shaft, absolute encoder, encoder, rotary encoder, encoder, absolute encoder, absolute encoder, function encoder, resolver, rotary pulse encoder, tachogenerator, incremental encoder -Manufacturer: Lenord Bauer, incremental encoder -Type: GEL 260-V-01250A201 -Shaft: Ø 8 x 25 mm -Bolt circle: Ø70 mm M5 -Number: 1x encoder available -Dimensions: 107/90/H90 mm -Weight: 0.6 kg

Valve islands, multi-pin connection, directional control valve, solenoid valve, pneumatic valve, air valve, pressure valve -Manufacturer: Festo, valve terminal CPV14 -Type: CPV14-GEMP-4 CPV14-VI -Valves: Festo 161 361 4 pieces -Individual components: see photos -Dimensions: 150/140/H100 mm -Weight: 1.4 kg

Plummer block housings, plummer block housings, plummer block bearing blocks, plummer block housing units, plummer block housing units, vertical plain bearings, plummer block bearings, tension bearing units, tension head -Manufacturer: PTI, Tension bearing unit type T205 -Balance: HC205-GE25KRRB -Bore diameter: 25 mm -Number: 31x clamping bearing units available -Price: per piece -Dimensions: 250/130/H35 mm -Weight: 1.8 kg

Tires with rim, trailer tires, heavy-duty tires, heavy-duty wheels, forklift tires, steel rims, rims -Manufacturer: GSL German Standard Lift, 5-hole steel rim -Type: 6.50F-10 ET-17 604700 -Hub bore: Ø 67 mm -Bolt circle: Ø 112 x 15 mm -Quantity: 8x rims available - Price: per piece -Dimensions: Ø 298 x 195 mm -Weight: 7.7 kg/pc.

Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston -Cylinder: Ø 63 mm -Piston rod: Ø 50 mm -Pipe outer diameter: 75 mm -Stroke: 500 mm -Total length when retracted: 730 mm -Piston rod mount: Ø 44 mm ball head -Hole diameter: Ø 30 mm -Quantity: 5 available -Price: per piece -Ideal for building a hydraulic press

General SKU221Y082 LocationBarneveld Specified Features - Miscellaneous Capacity102 kg/h Capacity50 l. Information MakeJordan SerialT5-75.1289/B-21 Magento base g_extra_specificationsSteam Generator performance 75 kW, steam capacity 102 kg/h, operating pressure 10 bar, with a 50 l vessel, pressure 11 bar, +5/+188 °C, Information Year of construction2021 Extra SpecificationsSteam Generator Performance: 75 kW Steam capacity: 102 kg/h Operating pressure: 10 bar with a 50 l. vessel: pressure 11 bar, 5—188 °CMiscellaneousJordanMiscellaneous > MiscellaneousBrand > Jordan What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

Kontrol screening machine GERICKE Screen basket approx. ø 190 x 580 mm, belt drive SPZ125-2 TL : SPZ 190-2 TL Rotor n=930 rpm, outlet ø 245 mm and 145 mm Mesh size nylon screen: 3 mm Refurbished and ready to use

Margarine pilot plant with 1x high pressure pump, 3x crystalizer scrap surface heat exchangers (SSHE), 1x pin worker (1 - 2 and 3 liter), 1x phase inverter, 1x cooling unit (R22) and control panel. Working product pressure of the pilot plant up to 80 bar (8000 kPa). Capacity up to 90 kg per hour., - High Pressure Pump, High Pressure Pump for pumping the margarine emulsion through the margarine pilot plant. Gerstenberg & Agger A/S, type Labo Pump 2-22-4 , serial number 12.211, year 1990, product pressure max 80 bar, temperature max 100 °C, capacity max 200 kg/h, motor 415 V - 50 Hz - 1,1 kW. Control panel with Siemens S7-200 PLC., - Scraped Surface Heat Exchanger 01, Cooler., Pilot G&A Perfector - SSHE Cooler Perfector 57 is designed for lenient cooling of medium viscosity, pumpable food like margarine. Gerstenberg & Agger A/S, type Perfector Lab 1x57, serial number 12910, year 1993, dut ...

Manufacturer: Homag , Type: Genius 20/50/16/V/G, Year: 1998, Control: Homatic, Feeding speed max m/min: 80, Working range X: 5600, Working range Y-axis: 1600, Working range Z: 60/120, C axis: yes, B-axis: no, Tool adaption system: HSK F 63, Milling engine 1 hours power: 12, rpm 1): 1500 - 18000, Number of tool changers: 1, Number of tools per tool-magazine: 30, Vertical drills-X: 5, Drill vertical Y: 5, raster table: Glattisch, 2 station allocation: yes, 4 station allocation: yes, Stops in the table front: 14, Stops in the table rear: 3, Vacuum pumps m³/h: 66 + 100, Saw unit: yes, Edgebanding unit: yes, Edgeband hight mm: 40, Marking laser: yes, Year :1998

Overview The pallet wrapper was built in 2007 by Italian manufacturer Robopac. The machine was used in a water and CSD production plant where it was part of a PET filling line with a capacity of 27,000 bph. The pallet wrapper was professionally dismantled and requires technical maintenance. Technical details Capacity: about 60 pallets by 23 wraps Working hours: 45 363 Pallet top cover function + Upper pressing unit Scope of delivery  Pallet wrapper Belts, rollers Sensors on conveyor belts (infeed, outfeed, diagonal). Spare parts (new and used) Documents

Overview   This ARCADE GEL 6 bottle washer was built in 2010 by the German manufacturer GM Gera. The machine is still in operation and can be inspected in person at any time. The ARCADE GEL 6 is fully functional and must be replaced due to an increase in performance.   Technical details   Nominal output: 33,000 bph   Control range: 13,200 - 36,300 bph   Chain pitch: 169 mm   Cell pitch: 110 mm   Bottle cells per row: 30 pieces   Total bottle cells: 7,860 pieces   Bottle cells, loaded: 7,680 pieces   Consumption  Compressed air: 1m³   Steam (operation): 489 kg/ h   Steam (heating): 4,430 kg/ h   Electrical power: 48.4 kW   Water: 7.35 m³/ h   Bath volume   Pre-soak: 2,263 l   Pre-caustic: 7,240 l   Caustic 1: 31,755 l   Caustic 2: 350 l   Hot water 1: 350 l  Hot water 2: 350 l   Cold water: 350 l 

Machine is in very good condition and swing-top bottles can also be driven 0.5l Bracket 0.5l Euro 0.33l Longleg

Overview This GERNEP Soluta 6-480/2 1SK TaxU labelling machine was manufactured in 2017 and is designed for the application of self-adhesive labels in beverage bottling lines. The machine is configured with one self-adhesive labelling station and is specifically adapted for swing-top (bail closure) bottles.The system is equipped with a HERMA labelling unit and supports a capacity of up to 2,500 bottles per hour, with a variable speed range from 800 to 3,000 bottles per hour. The machine is designed for U-seal label application and includes alignment systems for proper positioning of swing-top closures. With modern control technology based on Siemens S7-1200 and a Sütron touch panel, the machine offers reliable operation and easy integration into existing production lines. Technical Data Direction of operation: RM Capacity: approx. 2,500 bottles per hour Speed range: approx. 800 – 3,00 ...

pressure: 315 t stroke: 400 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

NEW, UNUSED LIFE BOATS , 32 PASSENGERS NORSAFE

SALMON SLICER-PORTIONER, GEBA TYPE: GPS 200 ASW Technical description: Serial number: 6000 204 Year: 2002 Power supply: 380/440 V - 50/60 Hz - 3 Ph Band width: 390 mm (plastic) Weight: 475 Kg Dimensions: 2750 x 1000 x 1490 mm The GPS 200 ASW is the Top Slicer. When the GP series was introduced in 2000 it caused a revolution. The industrial look initiated a new design- era at GEBA. With the new GPS 200 ASW we matched the challenge, to keep on perfektioning this extraordinary line of products, not only optically but also technically. Now you increase your yield and profit with computer-controlled adjustment (ASW) of the slice thickness and the cutting angle.

pressure: 160 t throat: 400 mm stroke: 355 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A large-format vacuum thermoforming machine Geiss with two window plates is available. Heating power: 360kW, connected load: 370kW, window plates: 2, min. window plate dimensions 1: 1360mm/860mm, max. window plate dimensions 1: 2460mm/1460mm, window plate adjustment 1 X/Y: 1100mm/600mm, min. window plate dimensions 2: 940mm/520mm, max. window plate dimensions 2: 2400mm/1400mm, window plate adjustment 2 X/Y: 1460mm/880mm, materials: PS/ABS/TPU/PMMA. Total system dimensions X/Y/Z: approx. 9150mm/2350mm/4000mm, total weight: approx. 15500kg, control: Siemens Simatic Panel PC, operating hours (April 2026): approx. 20100h. Documentation available. An on-site inspection is possible. Without vacuum pump, spare parts and temperature control unit. Expected to be available from October 2026.

max. wheel diameter: 406,4 mm gear width: 66 mm max. module: ca. 12,5 min. module: Control: Zyklengesteuert total power requirement: 21 kW weight of the machine ca.: 12,5 t dimensions of the machine ca.: 3,3 x 2,5 m The GLEASON 641 G-PLETE bevel gear generating machine is a proven and robust solution for the production of spiral bevel gears, hypoid gears, and Zerol bevel gears usingthe well-established Gleason generating method. Designed for reliable and repeatable machining processes, this machine is ideally suited for small to medium batch production in industrial gear manufacturing. The 641 supports both roughing and finishing operations in a single setup (completing process), ensuring consistent gear quality while reducing handling time. Its mechanical generating system with variable roll ratio and plunge feedmechanism allows precise control of the tooth geometry, making it a depend ...

Cream separator (Skimmer). Self cleaning. Machine comes with the bowl, motor (18,5 kW), water valves (original Westfalia), all inlet/outlet pipes, service tools for maintenance and a several spare parts., Additional features:, Excluding:, - Base plate and feet., - Motor cover., - Control panel., Type of Machine: Cream Separator / Skimmer, Capacity: 10.000 liter per hour, Bowl speed: 5.920 rpm, Motor: 18,5 kW - 230/460 V - 60 Hz - 1.770 rpm - 59 / 29,5 A , Dimensions: 190 x 105 x 190 cm, Weight: 1.800 kg

sheet width: 1250 mm plate thickness: 1,5 mm distance between columns: 1300 mm daylight opening: 80 mm : 155 ° total power requirement: Handbetrieben weight of the machine ca.: 0,18 t dimensions of the machine ca.: 1,4 x 0,8 x 1,3 m Segment-bending machine Segment widths: 2x50mm,1x70mm,2x75mm, 2x100mm,4x150mm, 1x170m. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Height=1.36 m, Overall length= 1.71 m, Overall width= 1.02 m, Net weight= 757 kg,

Unit 1 - Geiss CNC FZ 2800 x 1000 - Year of Manufacture: 2013 - Total Weight: 42.05 kN - Voltage: 400V, 3-phase + N, 50Hz - Connected Load: 25.62 kW - Rated Current: 37 Amp - Certification: CE Unit 2 - Geiss CNC FZ 2000 x 1000 - Year of Manufacture: 2012 - Total Weight: 30.22 kN - Voltage: 400V, 3-phase + N, 50Hz - Connected Load: 24.72 kW - Rated Current: 36 Amp - Certification: CE Find more here - / Contact us at -

Two Geiss CNC machining centers are available. 1) Geiss FZ 2000x1000, year of manufacture: 2012, travel path X/Y/Z: 2450mm/1400mm/800mm, B-axis: 285°, C-axis: 520°, speed: 30000rpm, table dimensions X/Y: 2000mm/1000mm, machine dimensions Y/Z: 2500mm/2450mm, weight: approx. 30500kg. 2) Geiss FZ 2800x1000, year of manufacture: 2013, table dimensions X/Y: 2800mm/2000mm, weight: approx. 42000kg. The Geiss machine with the year of manufacture 2013 has spindle problems. A cost estimate is available for this. The repair can be carried out before the sale or by the buyer. Documentation available. An on-site inspection is possible. Individual sale possible.

Stamping capacity 550 kN and 280 kN Projection 130 mm or 250 mm