ge healthcare used for sale

pressure: 110 t : Ø 40x20 mm throat: 500 mm engine output: 9 kW no. of strokes: 28 Hub/min stroke max.: 80 mm weight: 3150 kg Accessories / equipment: - punching table The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

all stainless steel belt width 900 mm mobile mesh width 5 mm adjustable speed with batter pump (2 pieces) outfeed belt outside dimensions (l x w x h) : ± 2.600 x 1.300 x 1.700 mm

all stainless steel control box with waiting, working and total time – with control : Jumo KpT 92 adjustable speed water filter dimensions (l x w x h) : ± 2.800 x 1.200 x 2.000 mm

CFS oil filter / oil filter CMF-56 380V 50 HZ 2kW. BJ. 2002

We sell a lower foldable tail lift the product group Bär Cargolift folding. Type BC 1000F2-A1A/2408-A0 Operating pressure 220 bar Year of construction 2009 The tail lift is in good condition, is available and can be viewed like in Meersburg, Baden-Württemberg.

Brand new machine designed for screwing reinforcements in PVC profiles. - simultaneous operation of both screwing units - separately adjustable distance between screwdrivers 250-540 mm - automatic screw feeding - automatic disconnection of the feeder movement - screw depth sensor - foot switch control Additional equipment: - machine base - pick-up rollers - pneumatic impulse to the feeder (13mm), preventing jamming of the screws in the feeder at the entrance and exit - feed force pressure reducer - additional manual slot for various screws - extended travel +30 mm to 130 mm - laser positioning pointer - screw depth sensor - horizontal pressure

Printing capacity max. 25 t, table 600 x 600 mm, stroke max. 350 mm

Used GENIUS B-640 Compact optical sorter. Principle of operation: The product is evenly distributed on the conveyor belt and scanned by cameras and / or lasers on both sides of the different control zones. A few milliseconds later, the defects are rejected in 1 or 2 separate jets by powerful air guns located at the end of the feed belt. A good product continues its way through processing. Electrical requirements Voltage: 400V 3-phase (+ neutral and protective conductor) Power: 4kVA Frequency: 50Hz Compressed air requirements Minimum pressure: 6-7 bar (90-100 PSI) (At the entrance of the sorter) Normal consumption: 400/1500 L / min Maximum consumption: 10,000 L / min Water requirements Water pressure: between 1 and 3 bar Temperature: between 5 ° C and 12 ° C

all stainless steel belt width 900 mm mobile adjustable speed dimensions (l x w x h) : ± 900 x 1.580 x 2.030 mm capacity : 380V, 50Hz, 5.62kW weight : 885 kg

750 MW each, UNUSED Gas Based Complete Combined Cycle Power Plants 2 units available Technical Specifications: The Project Details: 1. EACH module has two Gas turbines GE 9FA.03 (DLN2+) and one Steam turbine GE D11. Each GT exhaust is directed to the triple pressure unfired, natural circulation horizontal, type CMI USA HRSG. This configuration helps turndown operation of station up to 45%. 2. The Station is based on robust design of GE Gas Turbine with high efficiency DLN2+ Dry low Nox system, each GT is site rated for an output of 235 MW and the triple pressure reheat GE D11 Steam Turbine with downstream Exhaust, is site rated at 266 MW. The HRSG is a Triple pressure, Natural circulation, Horizontal design type with Deaerator atop the LP drum. Thus Net Combined cycle efficiency at Site condition is approx 57% on LHV basis. The inherent design of the gas turbine reduced the N ...

Used Gestetner 211 K to prepare

mobile belt width 400 mm adjustable speed with press roller capacity : 3,95 kW with air knife dimensions (l x w x h) : ± 3.700 x 900 x 1.700 mm

Spare parts for Tischbohrwerk VO / Stankoimport / Gertner, Fuhrmeister & CO E.g. complete spindle SK50 Ball screw spindles from the three axes Electric motors, 3 x feed motor, spindle motor complete control Siemens or control cabinet Control Panel with digital device Glass scales Detachable faceplate diameter 360 mm Radial movement of the faceplate-support 100 mm Converter / transformer Angle drilling head Dividing head Spindle diameter ø 110 mm tool holder ISO 50 Technical data of the original machine Travel along approx. 1.000 mm cross travel approx. 1.600 mm of vertical stroke 1,000 mm Longitudinal movement of retractable spindle 710 mm Speed range 10-1,250 RPM Main engine 11kw Speeds 10-1,250 RPM in 22 gear stages Extensive documentation of machine including operating instructions, description, electrical documentation, etc. More photos on request

Filling system for COOLANT manufacturer: Müller Geräetebau GmbH All information without guarantee

MECHANICAL PAPER SCALE WITH HANDPROBE PUNCH M. No.: 618371 Equipment / Additional information: Mechanical Paper Scale Schiltknecht Switzerland F. No: 8351

Qty. 1 Second-hand Powder coil coating line on aluminium strip 1500 mm wide Mfc.: TBA Built: 1991 Coating thickness: 60 microns Revamped by OTEFAL in 2003 Powder booth changed in 2011 – GEMA Coil coater for the pre-treatment changed in 2013 Degreasing section re-built in 2010 – OTEFAL Electrical device changed in 2006 Strip width: 800 - 1500 mm Strip thickness: 0.8 – 2.0 mm A wide range of colors - over 300 different shades Capacity: 9000 tons/year in 3 shifts work 5/7 Days so 2 000 000 m² Spool dia.: 508 or 610 mm Outside coil dia.: 1500 mm Average speed: 7.5 m/min.

RECON - with cooled exhaust seat rings - heavy fuel ---------------------------------------------------------------------- ------- Please note: we also have other various RECON parts of different manufacturers / types in stock. We are pleased to provide you with our current stock list. If you have any further questions do not hesitate to contact us

Marine gear box MG 509 USED Ratio 4.17:1 and more ratio's in stock

Gernep labelling machine type Labetta 4 / 3 / 10 640 A year of manufacturing: 2013 capacity: 7.500 bph work direction: right to left rotation: clockwise Stainless steel bottom frame instead off standard carbon steel bottom frame Format parts for: - 33 cl Vichy – Longneck – 30 cl BNR ; Neck, front and back label. - 2 different front label format parts 33 cl longneck; - 75 cl Bierre Belge bottle Corked; Neck, front and back label. Air driven glue pumps replaced by electrical driven glue pumps. Introduction wraparound labeler 2020, less wet glue labels since then. Incidental residual wet glue labels ran still May 2022 (remaining stocks) - machine conserved. Machine still in bottle line for conveyor use only, but stilll able to run. The machine is still in production until the mid of November 2023

Marine gear box Reintjes Model WAF 340 Ratio 4:1

MAsson gear Box Marine W 8000 C Ratio 1.98:1 power 1410 KW @1000 rpm Building year 2005 low hours

High speed mixer granulator Aeromatic PMA 1800 Gross volume 1800 Lt. Normal working volume 1500 Lt. Average granulated batch weight 825 Kg Impeller speeds 59/118 rpm Impeller motor capacities 60/75 kW Granulator speeds 1500/3000 rpm Granulator motor capacity 7.5/11 kW

GEA Tuchenhagen lye tank 21.490 liters used – in very good condition UNI-DACH Measurement and Weight: Total Height: 5600 mm Cyl. Height: 4200 mm Diameter: 2800 mm outside, with flange 2900 mm Weight: kg Surface: 2B=IIIC Upper body: - Central with conical lid - With manhole DN 500 - With sleeve ½ for level indicator - With 2 crane eyelets - with pipe socket DN 50 - inlet connection DN 150 - central connection DN 50 Cylinder tank: - With 10 cm isolation - With 200 mm flange connection, 8 screws Lower bottom: -With spout DN 65 -With sleeve ½ -With 4 calotte feet -With overflow spout DN 200

all stainless steel suitable for thermal oil heating 209 kW suitable for fire protection with top hold down belt isolated canopy infeed belt oil circulation system net belt length 6.000 mm net belt width 600 mm adjustable speed sediment removal system filter lifting unit with manual hoists dimensions (l x w x h) : ± 8.900 x 2.000 x 4.000 mm

High speed mixer granulator Aeromatic PMA 800 Gross volume 800 Lt. Normal working volume 640 Lt. Average granulated batch weight 350 Kg Impeller speeds 78/156 rpm Impeller motor capacities 30/36 kW Granulator speeds 1500/3000 rpm Granulator motor capacity 7.5/11 kW

GEA Canzler spiral heat exchangers with milk pipe fitting on the input and output, Operating pressure:-1 to 6 bar Operating temperature:-10 to 200 C ° Volume: 32 liters Area: 10 m2 Number of screws: 12 Empty weight: 400 kg

x-280 ,y- 200 , Z 315 , Table dimensions 380x380/250x500 A lot of writings,much more than pictured

TO WHOM IT MAY CONCERN ; WE VE GEA WESTFALIA OIL SEPARATORS OSD 6 WITH BELOW EQUIPMENTS AT OUR STOCK PLS FIND DETAILS ON BELOW --TYPE OSD6 - 91 - 067 / 3 & OSD -91-067 / 6 YOB 2006 SERIAL NO 9037-463 & 9038 - 150 BOWL SPEED 12000 VOLT 380VOLT FREQUIENCY 50Hz --ELWA HEATER TYPE 5609-V kW 12 BAR 6 -- TRANSFER FEED PUMPS --CONTROL PANELS EX STOCK READY TO DELIVER. IF YOU VE ANY FURTHER QUESTIONS PLS DO NOT HESITATE TO CONTACT WITH US . Capt. Ayhan Ugurluba BEST Regards ; Aliaga Marine Services E mail: info/aliagamarine.com Phn/Fax:+90 232 618 03 90 Mobile: +905556084850 aliagamarine.com TURKEY

GEA plate sterilizer 4 sections max working pressure: 16 bar max working temperature: 140 St C

For sale a used milling head of a Gleason Genesis 130 H

all stainless steel electrically heated 85 kW frying length 3.000 mm belt width 500 mm mechanical lid oil level control Teflon-infeed oil circulation pump filter sediment removal system hoists fire protection total length ± 6.300 mm total width ± 1.500 mm total height ± 3.310 mm

GEA Plate heat exchanger NT50T CDS-10 with 10 plates in very good condition Material: 1.4405 Min./Max. permissible pressure: 0 bar / 6 bar (both sides) Min./Max. permissible temperature: 0.0 °C / 100 °C Test pressure: 7.8 bar Volume: 0.82 / 1.03 L Kerb weight: 83 kg Width: 320 mm Height: 670 mm Depth: 600 mm Connections: 2x Flange DN50 2x Flange DIN 11851 (milk pipe thread) Number of plates: 10 Last refrigeration/heat medium: water-glycol mixture Seals: EPDM

GEA Plate heat exchanger NT50T CDS-10 with 10 plates in very good condition Material: 1.4405 Built: 2007 Min./Max. permissible pressure: 0 bar / 6 bar (both sides) Min./Max. permissible temperature: 0.0 °C / 150 °C Test pressure: 7.8 bar Volume: 0.82 / 1.03 L Kerb weight: 88 kg Width: 320 mm Height: 670 mm Depth: 600 mm Connections: 2x Flange DN50 2x DIN 11851 (milk pipe thread) Last heat medium: steam Seals: EPDM

GEA plate heat exchanger VT10 CDS-16 with 10 plates in very good condition Built: 03/2006 Min/Max permissible pressure: 0 bar / 10 bar (both sides) Min./Max. permissible temperature: -10 °C / 100 °C Test pressure: 13 bar Volume: 3.0 / 3.3 L Kerb weight: 133 kg Width: 290 mm Height: 920 mm Depth: 570 mm Refrigeration/heat medium: propylene glycol Connections: 4x Pipe nipple DN 50 Device can be inspected at any time in 76694 Forest upon request.

ALMiG Gear 132 Screw Compressor The screw compressors of the GEAR series are particularly suitable for very high compressed air requirements.  The maintenance- and service-friendly drive concept of the GEAR compressors includes a robust drive motor with strong power reserves. The highly efficient gearbox works with minimal slip, high operational reliability, is almost loss-free with an efficiency > 98% and protects the drive. In addition, highly efficient separation of the coolant enables a minimum residual oil content of only 2–3 mg/m³. Due to the encapsulated design of the gearbox set, these systems are suitable for use under the toughest operating conditions. Ideal for very high compressed air requirements Robust drive unit with strong power reserves Virtually loss-free concept with efficiency > 98% Maintenance- and service-friendly drive concept  ALMiG Gear 132  Yea ...

shaking machine, laboratory sample vibrators, Manufacturer Gerhardt Type Laboshake LS500 Very good condition, ready for immediate use 230 Volt 800 watts Lcqmcmwr

suitable for thermal oil heating 9 kW with lower and upper belt with Teflon infeed belt 1.200 mm extra product infeed belt outfeed belt suitable for fire protection suitable for CIP-cleaning frying length 3.000 mm belt width 700 mm adjustable speed oil circulation pump oil level control sediment removal system filter lifting unit with hoists dimensions (l x w x h) : ± 6.850 mm x 2.000 x 3.400 mm

GEKA HYDRACROP 55/S hydraulic ironworker machine built in 2008 in Spain, is a highly versatile and multifunctional machine that allows a wide range of workpiece machining. Its rigid, sturdy structure is equipped with 5 work stations, designed for the precise hole and corner punching, as well as shearing flat bars, angle bars and solid bars. Each work station is controlled by two hydraulic cylinders, which provide the possibility to work independently or in parallel on two stations simultaneously. The GEKA HYD 55/S ironworker machine weighs 1390 kg. Technical data of the GEKA HYDRACROP 55/S 2-cylinder ironworker machine General data - punching force: 55 t - cutting force: 110 t - number of workstations: 5 - number of hydraulic cylinders: 2 - engine power: 5 kW - weight of machine: 1390 kg Flat bar shearing station - flat bar dimensions: 300 x 15 mm; 200 x 20 mm - blade leng ...