ge 669 used for sale

Complete Milk and Cream pasteurisation line with separator, homogeniser and CIP tanks, with an input capacity of 12.000 liter per hour. Line still located in the dairy plant in Germany., Milk pasteurisation unit:, - Open level tank., - Product pump., - Plate Heat Exchanger, 4-sections, GEA Ahlborn, VT 40 BC-6, year 1981, volume 194 liter, 6 bar., - Overpressure system with boosterpump to get more pressure on the raw milk side compare to the pasteurised milk side., - Flow diversion valves which opens in case the pasteurisation temperature is not reached., - Holding 20 seconds., - Indirect hotwater circuit (steam - water) with steam valves, SWEP brased plate heat exchanger and circulation pump., - Icewater circuit with ice water valves., - Temperature cylce: 7° (in) - regeneration - 56 °C (separator / homogeniser) - 74 °C (pasteurisation) - holding (20 seconds) - regeneration - 4 °C (o ...

Used GEA table cooler type GES/GES with 12 fans. Manufacturer: GEA Ergé-Spirale / Soramat S.A. Technical data according to nameplate. Used GEA table cooler type GES/GES with 12 fans. Manufacturer GEA Ergé-Spirale / Soramat S.A. Technical specifications according to nameplate. Commercial sale / resale.

; Gross weight [kg]: 450; Engine: Kubota D1105-EF02; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 38

adjustable gearbox, variable speed gearbox, spindle adjustment gearbox -Manufacturer: GUSA Gensheimer, adjustable gearbox type SK 25 without drive -Speed range: n2 0-300 rpm at n1 1500 rpm -Drive motor: can be supplied at extra cost -Shaft diameter: 15 x 28 mm / 17 x 35 mm -Total dimensions: 300/200/H140 mm -Weight: 14 kg

Robust diesel generator with soundproofing on sled. 3-phase generator with harmonized arousal. Technical data: - Rated power 30 KVA - Diesel 495D, 4 cylinder water-cooled, 33.0 kW/45 hp - Consumption average 258 g/kWh - Electric start - Current 43.3 A - Frequency 50 Hz - Voltage 220V/3x400V - Cable outlet 40A with 20 m PUR cable 3PNE, circuit breaker 3phase, Operating hour counter - ATS (Automatic Transfer Switch) with automatic start repetition, Activation of the current cover, automatic shutdown in case of lack of oil pressure, Overheating, excessive speed - slide with 4 lifting eyelets, length approx. 2300mm, width approx. 1300 mm, height approx. 1600 mm, Weight approx. 900 kg Option at extra cost: - Distributor swells with suitable sockets at the end of the cable - Suspension Warranty: 2 years on all non-wear parts or 2000 operating hours, which is m ...

One used 7730 KVA GEC Alsthom 11KV AC generator( generator end ) for sale. The alternator is in a very good running condition. He was driven by a Siemens Tornado gas turbine. The location is our warehouse in solingen, germany. generator end: GEC Alsthom typ: CG710G2000U voltage: 11.000V powerrating: 7730 KVA rpm: 1500 r/min manufactured: 1991 weight: 19,5 T price on request

Equipment Manufacturer Power Speed Generator BRUSH 3125 kVA 1500 rpm Gearbox Allen Gears 3860 kW 1500 rpm 1Generator Manufacturer: BRUSH Electrical Machines Limited Main SpecificationsParameter Value Parameter Value Type AC Generator Rated Output 3125 kVA Speed 1500 RPM Voltage 10,000 V Current 180 A Frequency 50 Hz Phase 3 Phase Brushless Excitement 2. Gearbox Manufacturer: Allen Gears Limited Location: Pershore, England Type Epicyclic / Planetary Gearbox Technical Specifications Parameter Value Model APG 23 Serial No. X5/40848 Year 1980 Type Planetary Gear Gear Ratio 9.473 Performance Parameter Value Rated Power 3860 kW Duty Power 3355 kW input Speed 14,210 RPM Output Speed 1500 RPM CT INDUSTRY 2 Rue laennec Rosny sous bois 93110 GSM 06 03 86 59 55

Merlin Gerin Circuit Breaker compact C1001 N circuit breakers from 1996, 1 available. Ui 750 V / Uimp 8 kV Price: 2.500 €, Manufacturer: Merlin Gerin Model: C1001 N compact Type: Circuit Breaker / Motor Circuit Breaker Rated voltage [V]: 750 Rated surge voltage [kV]: 8 Year of construction: 1996 Dimensions [LxWxH]: – Weight [kg]: 177

Gear motor, electric motor, electric gear motor -Manufacturer: Müller & Georg, geared motor type ZGO G3 K 4 -Speed: 160 rpm -Power: 0.25 kW -Design: B3 -Shaft: Ø 22 x 50 mm -Protection rating: IP 54 -Dimension: 450/158/H205 mm -Weight: 14.8 kg

adjustable gear motor, variable speed gear motor, electric motor -Manufacturer variable speed gearbox Nord type: SK01R-63L-4-100LU -Motor power: 0.18 kW -Speed range: 68-340 rpm -Motor: adjustable -Height of shaft axis: 102 mm -Drive shaft: Ø 20 mm -Construction: B3 -Number: 3 motors available -Price: per piece -Dimensions: 465/180/H310 mm -Weight: 20.55 kg

adjustable gear motor, variable speed gear motor, electric motor -Manufacturer variable speed drive type: SK01-R1000-/1/L/4 -Engine power: 0.37 kW -Speed range: 33-165 rpm -Motor: adjustable -Height shaft axis: 100 mm -Design: B3 -Drive shaft: Ø 20 mm -Quantity: 1 piece available -Dimensions: 505/320/H195mm -Weight: 23kg

Gear motor, electric motor, three-phase motor, electric gear motor -Manufacturer: Motor EMOD type EEDF 65S/4 -Manufacturer: Gearbox Getriebebau Nord type SK.5301 SU-63 S/4 ED -Speed: 4.1 rpm -Power: 0.12 kW -Construction: hollow shaft angle -Diameter shaft: 20 mm -Protection class: IP 54 -Dimensions: 360/135/H190 mm -Weight: 15 kg

Manufacturer: Risco Calibration gear type RS 251 for filling machine RS 3005, RS 4003, RS 5005 Ask for offer iNTER-WiBA Sp.J. UL. Krakowska 263 PL 43-305 Bielsko-Biala USt-IdNr.: PL547-17-47-669 Tel. 0048/33 812 58 60 fax. 0048/33 812 58 36 info@inter-wiba.com.pl abc.inter-wiba.com.pl

TWIN DISC GEAR BOX RATIO 4.56:1 SERIAL NO 7S-957

General electric 4665

Complete UF system by GEA For concentration of products . Previously used for Yoghurt . All details are in the images attached . Contact us for more information and would you like to inspect.

Stiebel Gear Type :4281.14.09903.97 Type.nr : 3622-505045314 Art.no : 1190103 Rexroth: 4281 . 14 . 09903 . 9 . 97 3622-505045314

Generator in steel cabinet, dimensions: 4800 mm x 1200 mm x 2400 mm.

Martin/Geel/Miller/Engl weld-on plate with retaining lugs Size M03 35mm shaft diameter 184mm internal widths 180mm shaft spacing

Manifold GEA TUCHENHAGEN Mixproof-valves - Flushing - Balanced Valve top type: TM15N2B0M/66 DN25 NL = 8x DN25 KWIK = 3x DN 65 = 2x DN 80 = 27x Please contact u for more information

General electric 183-18-0390-0

APE gearbox (Dualbox) geabox Type: Planetary Epicenclic Reducer Brand: APE Allen Gears (UK) Reduction Ratio: 2.247:1 Input Speed: 14,210 RPM Output Speed: 1500 RPM Rated power: 860 kW (service: 3355 kW) Type: Epicacyclic (Planetary) Model: APE 43 Reduction Ratio: 2.247:1 Rated power: 860 kW Power in service: 3355 kW Input speed: 14210 rpm Output speed: 1500 rpm

Type: Epicacyclic (Planetary) Model: APE 43 Reduction Ratio: 2.247:1 Rated power: 860 kW Power in service: 3355 kW Input speed: 14210 rpm Output speed: 1500 rpm Type: Planetary Epicenclic Reducer Brand: APE Allen Gears (UK) Reduction Ratio: 2.247:1 Input Speed: 14,210 RPM Output Speed: 1500 RPM Rated power: 860 kW (service: 3355 kW) Total weight: 1000 kg

12-piece die block for die bending machine GEWAAbending tool for press brake, lower toolType: 0255/14Prism size: 16 mm for 90Prism angle: 88Countersunk depth: approx. 8 mmOverall height: 120 mmmax. Printing capacity per meter: 100 t/mFoot width from the die: 60 mmTotal length: 4175 mmSegment lengths: 4 x 835 mm, 1 x 400 mm, 1 x 200 mm, 1 x 100 mm, 1 x 50 mm, 1 x 40 mm, 1 x 20 mm, 1 x 15 mm, 1 x 10 mmWeight: 110 kgvery good condition; used

Pressure filler Vipoll GEA type: Visipraktik VKR-ES-DN 12-3 K capacity: up to 3.000 bph double pre-evacuation working hours: less than 1.000 for 330 ml bottles bottle diameter: 50 - 105 mm bottle height: 125 - 370 mm

Properties Total height 4900 mm Depth 4000 mm Width 5200 mm Manufacturer GEA/ Tds Ahaus Type 1500 Machinery No. 36001027.15.1 Year of construction 2003 Description CIP Appendix No.6 Tank volume and dimensions: CIP Tank 1 Volume: 5,500 litres Length: 1,400 mm Width: 1,050 mm Height: 3,800 mm CIP Tank 2 Volume: 5,500 litres Length: 1,400 mm Width: 1,050 mm Height: 3,800 mm CIP Tank 3 Volume: 1,000 litres Length: 1,100 mm Width: 900 mm Height: 1,000 mm CIP Tank 4 Volume: 1,900 litres Length: 1,100 mm Width: 900 mm Height: 1,950 mm

DC, geared motor -Power: 3 kW -DC motor: Manufacturer Baumüller, type DSG -Speed: 6000 rpm -Transmission: Manufacturer Nord Type 2282AZ-IEC 80 -Translation: 1:11,81 -Hollow shaft diameter: 35 mm -Speedometer: Manufacturer Stegmann Type DG 60L XSR 500 Pulse/REV -Dimensions: 690/340/H200 mm -Weight: 50 kg

Direct current, gear motor -Power: 6.8 kW -DC motor: Manufacturer Baumuller type DSG 71-M -Gearbox: manufacturer Nord type 32-2AZ-IEC 90 -Translation: 1: 25.88 -Hollow shaft diameter: 40 mm -Speed: 4000 rpm/155 rpm -Tachometer: Manufacturer Stegmann type DG 60 XSR -Weight: 85 kg

Direct current, gear motor -Power: 2 kW -DC motor: Manufacturer Baumuller type DSG -Speed: 6000 rpm -Gearbox: manufacturer Nord type 02050F IEC80 -Translation: 1: 24.01 -Shaft diameter: 25 mm -Tachometer: Manufacturer Stegmann Type DG 60L XSR 500 Puls/REV -Dimensions: 605/240/H200 mm -Weight: 30 kg

variable speed geared motor, variable speed geared motor, electric motor -Manufacturer Motor Nord Type: SK63L/4 -Manufacturer of variable speed gear North type: SK01-R080U-63-L/4 -Motor power: 0.18 kW -Speed range: 55-275 rpm -Motor: adjustable -height shaft axis: 102 mm -Drive shaft: Ø 20 mm -Construction: B3 -Number: 1 piece available -Dimensions: 350/175/H305 mm -Weight: 13.9 kg

Geared motor, electric motor, electric geared motor, bevel geared motor -Speed: 5.3 rpm -Power: 3.0 kW -Design: B3 -Protection class: IP55 -Shaft: Ø 65 x 130 mm -Gearbox: Nord Getriebebau Type SK.63 IEC 100 -Electric motor: DIETZ type FDR100LB/4 -Dimensions: 890/330/H490 mm -Weight: 166 kg

Key data: 600 mm, 20

The Mahr Primar GMX 600 gear measuring machine was designed as a universal machine and is used by manufacturers of gears and transmission technologies, for the process of measuring gears, camshafts, rotationally symmetrical components, tools. . Technical data Diameter: 600 mm Module: 20 mm Axial travel: 700 mm Dimensions: 2,300 x 2,400 x 1,800 m Machine weight: approx. 5,000 kg Information and data are non-binding, subject to prior sale Special features: Can be delivered as a used machine or as a retrofit with a new control system based on Siemens and measurement software.

TO WHOM IT MAY CONCERN ;

BAG FILLING STATION WITH LIFTING AUGER, single or double bag filling station for 1000 kg. (apprx) big bags, all made in sturdy carbon steel structure

Power: 211 kW - Ratio: 71:1 - RPM in/out: 1.485 / 20,9 - Shaft ø in: 70 mm. - Shaft ø out: 190 mm.

Format Parts: 0.375 Bord 0.375 Schleg 0.5 Bord 0.75 Bord? 0.75 Schleg 1.0? Bord? ?1.0 Schleg 1.5l Bord? ?1.5 Schleg Seriennr.:?15231

GERA Bottle Washing Machine – Arcade GEL 6 RV1-VL 362/110-30 (Year 2010) High-capacity industrial bottle washing machine designed for efficient cleaning of returnable PET and glass bottles in beverage production lines. The GERA Arcade GEL 6 RV1-VL 362/110-30 provides reliable multi-zone washing performance and high throughput, making it ideal for breweries, soft drink producers, and mineral water bottlers. General Information - Manufacturer: GERA - Model: Arcade GEL 6 RV1-VL 362/110-30 - Article Number: 1334 - Year of Manufacture: 2010 - Operating Hours: approx. 35,000 h - Condition: Excellent used condition, regularly serviced Technical Specifications - Production Capacity: approx. 30,000 bottles per hour (1.0 L format) - Control Range: 13,200 – 36,300 bottles per hour - Cell Pitch: 110 mm - Bottle Cells per Row: 30 - Total Bottle Cells: 7,860 Washing System  ...

USED GEA TUBULAR JUICE PASTEURISER DEAERATOR AND HOMOGENISER 7700 LPH FOR SALE Item #: Usm-187 Category UHT Plants 1) Pasterization plant with deaerator Ø program controlled Pasterization plant for fruit and vegetable juices, with a indirect heating system and regenerative exchange circuit, including a CIP connection and a connected deaerator Ø Manufacturer: GEA Finnah GmbH Ø Type: 6700/077 Ø Year of manufacture: 1998 Ø Max.capacity: 7700 L/h Ø for fruit and vegetable juice : viscosity 25 cp/10°C ; fibre lenght: 4-6mm 2) Homogenizer Ø Manufacturer: GEA Finnah GmbH Ø Type: NS 3075/55 Ø Year of manufacture: 1998 Ø Capacity: 7700 L/h Ø Operating pressure: max. 220bar

Overview   This ARCADE GEL 6 bottle washer was built in 2010 by the German manufacturer GM Gera. The machine is still in operation and can be inspected in person at any time. The ARCADE GEL 6 is fully functional and must be replaced due to an increase in performance.   Technical details   Nominal output: 33,000 bph   Control range: 13,200 - 36,300 bph   Chain pitch: 169 mm   Cell pitch: 110 mm   Bottle cells per row: 30 pieces   Total bottle cells: 7,860 pieces   Bottle cells, loaded: 7,680 pieces   Consumption  Compressed air: 1m³   Steam (operation): 489 kg/ h   Steam (heating): 4,430 kg/ h   Electrical power: 48.4 kW   Water: 7.35 m³/ h   Bath volume   Pre-soak: 2,263 l   Pre-caustic: 7,240 l   Caustic 1: 31,755 l   Caustic 2: 350 l   Hot water 1: 350 l  Hot water 2: 350 l   Cold water: 350 l 

Parallel lathe Geminis GE650S to be rebuilt. Distance between points: 1000mm. Flip on bench: 680mm. Flip on cart: 410mm. Flip over neckline: 850mm. Main hole: 84mm. Motorized trolley and charriot. Speeds: 18 (13-1000rpm). Main engine: 15hp. Plate and trolley protections and CE RD1215/97 certificate. Quick-change plate and turret.

turning diameter: 880 mm turning length: 6000 mm swing diameter over bed slide: 540 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Brand: Geminis Type: GE870 Distance between centers: 6.000 mm Centre height: 440 mm Swing over bed: 880 mm ø Swing over support: 540 mm ø Swing in the gap: 1.100 mm ø Spindle boring: 85 mm ø Steadys: 400 mm ø + 600 mm ø 3 jaw chuck Digital read-out The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Geminis GE870 used lathe. Distance between centers: 2.000mm. Swing: 870mm. Swing in carriage: 580mm. Swing in gap: 1.100mm. Bore: 82mm. 18 speeds (16-1250rpm) Equipped with universal chuck. Equipped with 4 jaws chuck. Equipped with steady rest Equipped with follow steady rest. CE for used european machinery.

New washer/dryer Manufacturer Getinge Lancer Type GEW P 888-1 electrically heated, single-door version Goods to be washed, glassware and parts of bottling plants Chamber size: 805 x 770 x 805 mm (W x H x D) External dimensions 2,000 x 2,170 x 1,076 mm (W x H x D) Dimensions in disassembled state / min. clearance 2395 x 2100 x 1395 (W x H x D) Weight Approx. 1100 kg (without load) Housing wall stainless steel AISI 304 (1.4301), Ra < 0.9μm Frame AISI 304 stainless steel (1.4301), with adjustable feet. Version Single-door version with automatically operated vertical sliding glass door, for loading and unloading. • Loading area 900 mm • 2 independent washing levels GMP

Embossing press Baier GEBA 1/F, installation height 90 mm, printing capacity 800 kg, working size 10cm x 14 cm, year of construction 1973, machine number 73040, in good condition, immediately available If you are interested, we will also be happy to inform you about other machines in our company. You are welcome to visit the machine in our house by prior appointment.

PLC CONTROLLED MIXING, BAG FILLING AND WEIGHING SYSTEM, for plastic granule, customized to the project, including [vertical mixers](.germanplast.eu/it/annunci/4309783-vertical-mixers-from-5-to-3 0-m3), buffers,, pneumatic system with deviators, cyclones, .., with and without loading screws, loading cells, digital display, visual and sound alarms, all managed by a PLC

A GM Gera bottle cleaning system is available. Throughput capacity with 1l PET bottles: 13000 bottles/h, bottle cells: 3240 pieces, cells per basket row: 18, cell pitch: 110mm, chain pitch: 169mm, total treatment time: approx. 15min, total immersion time: approx. 7.5min, housing material: stainless steel (SST). System dimensions X/Y/Z: approx. 8900mm/4200mm/3350mm, weight: approx. 23650kg, operating hours (09.2025): approx. 14300h. Documentation available. An on-site inspection is possible. Expected to be available from mid-March 2026.

GERNEP Labetta labeling system. Built in 2013 with 11 bottle positions, 3 self-adhesive label dispensers and 2 wet glue label dispensers. Output 6K bottles per hour. Servo plate (also for cans). Self-adhesive formats available: 200ml/ 330ml/500ml/750ml. Wet glue format available: 200 ml other formats can be retrofitted. Incl. treadmill and turntable. For more details, please contact us.

General SKU431X1350 LocationBarneveld CEcheck MakeGeppert Band Conveying Systems Main Features Motor0.25 KW Length3800 mm Width140 mm Specified Features - Conveyor belt MaterialPlastic, Stainless steel Conveyor beltcheck Elevator beltcheck Belt width140 mm Belt length3800 mm With carrierscheck Carrier height100 mm With motor0,25 kW, 219-241/380-420 volt, (Ex) Belt speed137 rpm Outlet height1300 mm Information TypeGES-50-K-W Mach.No.1509113 Year of construction2015 Mounted on framecheck Inclined on framecheck Floorspace3,20 x 0,80 m Total height2,20 mConveyor beltsGeppert-Band GmbHConveying systems > Conveyor beltsBrand > Geppert-Band GmbH What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlan ...

Overview The bottle washer was previously used in a brewery. Due to the low number of operating hours, the machine is in very good condition, like new. It was replaced, as the previous owner wanted to run bottle formats, which did not fit this machine. All basins and the machine body are made of stainless steel. The machine is already disassembled and dry stored, so that it can be easily loaded and transported. The machine comes with 12months warrantee. Tech Specs: Capacity: 9,500 bph Cell Pitch: 95 mm Bottles per row: 25 Dimensions + Weights: Housing: 7,162 x 2,740 x 2,500 mm / 18,806 kg Ready for operation with attachments: 7,162 x 3,540 x 2,730 mm / 31,563 kg YOM 2024 Formats: 0,25l 0,33l 0,5l 0,75l The Machine in Detail / Equipment Features: Heated by steam Pre Cleaning and removal of residual liquids by pulsed rinsing prior to washing CE certified Chemical Dosing Pumps Machin ...

At Dairy Machinery UK we offer a large variety of Spare Parts for the below manufactures. Keeping our ongoing assistance with our customers we have achieved best prices for genuine Spare Parts Directly From Manufactures ., Spare parts from these manufacturers, - Alfa Laval, - Tetra Pak, - GEA Westfalia, - GEA Tuchenhagen, - GEA Hilge, - GEA Niro Soavi, - GEA Aseptomag, - Fristam, - Pentair Südmo, - E&H (Endress und Hauser), - APV Gaulin, - APV Rannie, - SPX, - HST, - Buschjost, - Samson, - Sumitomo, - other manufacturers on request, Contact Us for your requirements., Parts available: Alfa Laval Tetra Pak GEA Westfalia GEA Tuchenhagen GEA Hilge GEA Niro Soavi GEA Aseptomag Fristam Pentair Südmo E&H (Endress und Hauser) APV Gaulin APV Rannie SPX HST Buschjost Samson Sumitomo other manufacturers on request, Gaskets for Pasteurisers: GEA, ALFA LAVAL , TETRA PAK, FISCHER,ARSOPI, PIETRIBIASI ...