gc ms used for sale

Metal detector for conveyor belt, all metal detector, tunnel metal detector, metal detector -Manufacturer: SS Temafa, metal detector all-metal search system -Metal detector: SS TFX 4000/440 -Detector opening: Ø 440 x 530 mm -Control: Temafa MSG 4-FF -Individual components: see photos -Transport dimensions: 750/530/H790 mm -Weight: 96kg

LINDNER MICROMAT MS2000, rotor length 2.025 mm., n.104 knives, knives size 43x43x23 mm., screen size 50 mm., V-belt 75 kw drive 400V 3Ph.50 Hz 1500 rpm, rotor speed 80 rpm, hydraulic ram, constructed in 1997, offered RECONDITIONED, installed power : 75

This MICROSTEP MSF 9001.25Lr+T500 Fiber laser cutting machine was manufactured in 2015 in Slovakia. It is equipped with a 10kW laser, nLight CORONA-CFX-10000. The working area is 9000 x 25000 mm and the maximum cutting capacity is up to structural steel of 25 mm. As additional equipment the machine comes with Donaldson DFPR08 extraction equipment, automatic lubrication system and beam guidance via light cable. The machine was retrofitted in 2022.

This MicroStep MSF 3001.20L Fiber laser cutting machine was made in the year 2017 and has 15735 production hours, of which 4907 are cutting hours. It is equipped with an iMSNC control unit. The machine has a laser power of 3 kW.

plate thickness: 6 - 40 mm feed: 2,2 m/min total power requirement: 1,5 / 2,1 kW weight of the machine ca.: 65 Kg dimensions: 1,2 x 0,8 x 1,1 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 250 mm, 4 kW, 4060 m³/h

arke: Holtrop Jansma Clean Air Extraction Type: MSO 250 Year of construction: 2016 M-No.: W0056730S Clean air extraction: MSO 250 with flame protection device Intake support: ø250 mm Length: 2,250 mm Width: 1,230 mm Height: 2,840 mm Weight: 600 kg Capacity: 4,060 m3 /hour Pressure: 1,900 Pa Power supply: 4.0 kW, 380V, 9 Amp Filter surface: 27 m2 Filter bags: 30 pcs. Length of filter tubes: 1,450 mm Filter tube diameter: 200 mm Cleaning: included Noise: dB(A) Flame protection system: automatic fire extinguisher with powder extinguishing agent, automatic slider in the return air duct, automatic electrical shutdown of the extraction (New powder fire extinguisher witrd assembled before delivery) Scope of delivery: filter system, with built-in intake fan, control cabinet, automatic fire extinguishing installation with flame protection damper

Holtrop Jansma Extraction with Kontainer Chip Disposal Type: MSK350S Year of construction: 1998 Type: overpressure filter system Intake manifolds: ø350 mm Capacity: 8,000 m3/hour Year of construction: 1998 Filter surface: 46 m2 Fan: ETD 350, 7.5 KW/1.500 tpm Star wheel chip disposal: 800 mm - Pressureless Chip disposal fan: EMD-200, 4 KW-300tpm, 45m3/uur Explosion Pressure Release: Doors serve as a pressure release in the event of an explosion Pressure Measurement: Pressure Dial Gauge Cleaning: 0.13 KW/1500 KW vibrating motor Air recovery: 500500 mm with built-in flame protection damper Dimensions: 3,3503,0001,200 mm Scope of delivery: filter system with intake fan Fan, transport fan, control cabinet, air recovery with built-in flame protection flap

Used Blow Molding Machine UROLA MSC6 HDPE Year 2019 Introduction The UROLA MSC6 HDPE blow molding machine manufactured in 2019 stands as a pinnacle in HDPE bottle production technology Equipped with six moulds this rotary blow molder sets a new standard in efficiency and performance Technical Specifications The UROLA MSC6 HDPE utilizes a rotary blowing unit featuring six cavities capable of achieving a maximum output of 1600 bottles per hour Furthermore the machine boasts a maximum mould opening of 240mm and a mould clamping force of 9 000 kg ensuring precision and stability in the production process Blower HDPE Crafted specifically for High Density Polyethylene HDPE bottle production the UROLA MSC6 HDPE guarantees superior quality and durability Its advanced design and engineering cater to the demanding requirements of the packaging industry making it an ideal choice for manufacturers s ...

Description: Nominal power: 2000 W Nominal speed: 4200 rpm Blade diameter: 254 mm Max. material thickness: 90 mm Serial number: R11W01 00067 Approx. Onsite Dimension. (l x w x h): 920 x 570 x 600 mm, weight approx.: 20 kg

sheet width: 3000 mm plate thickness: 3 mm weight of the machine ca.: t 3 support arms 1 angle stop pneumatic hold-down device Backgauge to be operated by hand The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Description: • Multi spindle slot mortiser • Serial number AC 256-T8 • 2  ,tables with dimensions 1000 x 220 mm each • Tables with adjustable height 120 mm and depth • 2 pneumatic clamp devices in each table • 5 horizontal independent oscillanting units working by 2 sides, motor power 0.50 KW-6000 rpm each • Head height adjustment 60 mm • Maximum tool diameter 16 mm • Frequency converter Approx. Onsite Dimension. (l x w x h): 1,800 x 1,650 x 1,550 mm, weight approx.: 1,300 kg

Description: Saw belt length: min. 3450 mm, Max. 3640 mm Table dimensions: 615x615 mm Capacity: Max approx 250 m/min IDEAL saw blade repair device throat: 400 mm, workpiece height max.: 300 mm, weight approx.: 500 kg, Approx. Onsite Dimension. (l x w x h): 1,050 x 900 x 1,950 mm

Description: MNR: R911309706, SN: 7260410805523, 4700 rpm, 600 V, DC 24 V, 1.77 Nm/A Approx. Onsite Dimension. (l x w x h): 300 x 100 x 130 mm, weight approx.: 6 kg

Description: MNR: R911309706, SN: 7260410805529, 4700 rpm, 600 V, DC 24 V, 1.77 Nm/A Approx. Onsite Dimension. (l x w x h): 300 x 100 x 130 mm, weight approx.: 6 kg

Description: MNR: R911309706, SN: 7260410805524, 4700 rpm, 600 V, DC 24 V, 1.77 Nm/A Approx. Onsite Dimension. (l x w x h): 300 x 100 x 130 mm, weight approx.: 6 kg

Specifications: - Max. working width 3040 mm - max. material thickness 4 mm - Manual cutting angle adjustment - Stroke rate up to 34 1/min - Backgauge with positioning control Pos100 - Table height approx. 850 mm - Front angle stop - 2 front support arms - Rear space protection with light barrier - E-foot switch - Pneumatic connection 6 bar - Drive 400 V - Space requirement without support arms approx. W 4000 x H 1400 x D 2100 mm - Weight approx. 4700 kg

Specifications: - Max. working width 2520 mm - max. material thickness at 40 kp / mm², strength 3.5 mm - Bending angle adjustment can be preselected - Upper beam drive 400 V / 1.1 kW - Bending beam drive 400 V / 4.0 kW - Space requirement approx. W 3900 x H 1550 x D 1200 mm - Weight approx. 4500 kg

Description: Weld edge chamfering machine Welding edge angle: 37.5° max. bevel width 12 - 20 mm Bevel angle 15 - 55 degrees Feed 1.5 / 3.0 m/min Sheet thickness 6 - 40 mm Feed 2.2 m/min Total power requirement 1.5 / 2.1 kW Machine weight approx. 104 kg Dimensions L x W x H 1.2 x 0.8 x 1.1 Approx. Onsite Dimension. (l x w x h): 1,200 x 800 x 1,100 mm, weight approx.: 104 kg

Wire diameter 8-20 mm, straightener 500-14,000 mm, rotor straightening system, wire diameter change fully automatic, 6 reels 5 ton coils, outlet 14 m

Description: magnetic mixer with heating plate  ,2 pieces serial number 01030218110456  ,  ,  , Approx. Onsite Dimension. (l x w x h): 300 x 200 x 150 mm, weight approx.: 10 kg

Description: Power supply: 230V/50Hz Approx. Onsite Dimension. (l x w x h): 1,200 x 800 x 1,800 mm, weight approx.: 1,000 kg

General SKU254S218 LocationBarneveld MakeNormag Labor und Prozesstechnik GmbH (D) TypeMSB DN70/50 Mixer-settler No.A 1601412 Year of construction2017 Main Features MaterialGlass Volume40 Ltr. Specified Features - Varias mezcladoras Capacity4x 10 Ltr. MaterialGlass Information Total height1,6 m Weight240 kg CEcheck Floor space1,3x1,3 m Extra SpecificationsThis is a laboratory test setup for aqueous solutions. Consisting of four Normag glass vessels of approximately 10 liters (-1/0.5 bar, -20/+100°C). Using 2 Fink Chem + Tec membrane dosing pumps type R05-120 with a capacity between 0.12 and 120 ml/min, thin liquid fluids can be pumped. On top of this skid, two double-walled process vessels of approximately 350 ml are placed. These vessels are fed by two speed-controlled pumps/mixers. The whole setup is mounted on and in a stainless steel frame. This frame is placed in  ...

roll diameter:420 mm throat:400 mm workpiece height:325 mm table surface area:615 x 615 mm table swivelabel +/-:10/45 ° table - inclinable:+/- 20 ° cutting speed:20 - 2500 m/min total power requirement:2 kW weight of the machine ca.:0,5 t dimensions of the machine ca.:0,95 x 0,65 x 1,83 m

turning diameter:80 mm turning length:235 mm max. bar capacity:42 mm power capacity - driven tools:1 kW speeds spindle 1:6000 1/min speeds spindle 2:5000 1/min numbers of turret head positions:8 pos drive capacity - spindle motor:SP1 11 / SP2 5,5 kW Tools speed:60-6000 1/min weight of the machine ca.:ca. 3 t dimensions of the machine ca.:2,4 x 1,5 x 1,6 m High Performance CNC Turning- and Milling Center - chipconveyor - subspindle - live tools - C-axis - brake - partscatcher and partsconveyor - tool eye - barloader LNS HYDROBAR MINI-SPRINT approx. 5000 working hours

1 piece snow shovel (presentaion unit,2 x used so Mint) > Quick recording with forks > Protection against unintended slippage > Clearance angle 2 x to the left or right adjustable > Rubber cutting edge attached 150 x 20 mm, thus it is faster Change later possible > Surface painted RAL 2000 (yellow-orange) > technical data: -Blade width: 1500 mm -adjustable space width: 1,100 / 1,300 / 1,500 mm -Plate height: 620 mm -Fork cross sectional area: 150 x 50 mm -Fork distance: 420 mm -Tare weight: 175 kg -incl. 1 year p + K.-warranty included > MSRP manufacturer: Recommended Manufacturer Price Euro 1.275 export price (delivery inside Germany + 19% Tax) PICK up price from 71116 Gaertringen (Shipping extra on request, possible) save over 37 % compared to Manufacturer price Be ready, because the next winter / weat ...

FRIGOSCANDIA GYROCOMPACT GC42-08-30-06-NS-CCR Product number:M19-5013 Cooling capacity:100 kW Number of fans:1 Fin spacing:25mm - 6mm mm Defrost:Hot gas Refrigerant:NH3 Refrigerant Content:390 kg Voltage:400 Volt Power consumption:25 kW Motor power:30 kW Dimensions:7050 x 2620 x 3900 mm Weight:6500 kg Year:1996 Number in stock:1 piece(s) Price:Quotation request A nice compact Frigoscandia spiral freezer. Model GC 42-08-30-06-NS-NHT-CCR with a product capacity of maximum 1.000 kg/h (based on green peas). In/outfeed configuration is North/South. Infeed height = 560mm, outfeed height = 2540mm. Belt rotation is Counter Clock Wise, belt width gross = 420mm, belt width net = 375mm, max product height = 65mm, numbers of tiers = 30 tiers. Belt mesh width = 6mm. This Frigoscandia spiral freezer has been well maintained and is in top condition. The freezer is executed with a S. ...

Tip height 120 mm, grinding length 1000 mm, 8 spindle speeds 55 - 600 rpm, spindle head holder MK 3, table sash. infinitely adjustable, table swivel 7 each, delivery by hand or automatically, grinding wheel-dm. max 400 mm, Grinding wheel width approx. 60 mm, tailstock holder MK 2, connection value approx. 3.5 kW, automatic working cycle, express speed 30 mm, automatic. Piercing loops. The machine is functional and does not require a geometric revision. Accessories on request!

Manufacturer: Pressta Eisele Type: 501 angle punch Overhaul year: 2020 Built in 2010 Saw blade carbide: 500 mm Drive power saw motor: 5.5 KW Speed Saw Motor: 2860 min-1 Cutting speed Saw blade: 4500 m/min Saw blade feed: infinitely adjustable 0-70 mm/s Tool area 90 max approx.: 20 x 250 mm Punching cylinder: 1 pcs vertical top diameter 100 mm ,1st st horizontal front diameter 100 mm Punching force power: 4.0 KW Pressure max. 280 bar Pressure in KN at 280 bar approx.: 210 KN Volume flow at 280 bar approx.: 6.8 L/ min Pressure in KN at 200 bar approx.: 150 KN Volume flow at 200 bar approx.: 9.5 L/ min Supply length pneumatic: single stroke max. 600 mm Servo controlled: single stroke max. 600 mm Multiple stroke max. 9999mm Replenishment. servo-controlled replenishment unit max. 500 mm/s Compressed air connection on the side: 6 bar Weight (s ...

Stock number: L0931-06 Used Cannon type GCI/450 l/MI approximately 450 l working capacity and 638 l total capacity vertical white glass lined reactor. Internal approximately 902 mm diameter x 665 mm diameter straight side. Has clamped dished top and welded dished bottom heads. internal rated full vacuum / 2.76 bar design pressure at -10 /+ 230 C. Carbon steel jacket 85 l capacity rated 5.17 / 4.17 bar design pressure -10/+230 C. Includes 3-blade retreat curve agitator belt driven by 1.5 kW 415 V, 3/50, 1420 rpm motor via highfield gears size 5 gearbox rated 31/3 reduction ratio and mechanical seal.

PCA Senertec heating oil system used with 32000 hours of operation System until the very end in operation Regulator in MSR1 Performance increase Power 5,3 kW thermal power 10,5 kW

Bevel-helical gear units Manufacturer: Bonfiglioli Model: A-50 4 UH50 P90 LO E engine: Euromotori 1 .1kw MS9016 Built in 2008 NEW, unused from old stock for further details please refer to the pictures.

Bevel-helical gear units Manufacturer: Bonfiglioli Model: A 413 UH45 P80 LO E engine: Euromotori 0, 55kw MS8026 Built in 2008 NEW, unused from old stock for further details please refer to the pictures.

Key data: 31 , 2800

DC motor with brake 31.5 kW Mannesmann DEMAG GCH 140 D2/1105 used, from spare parts warehouse 1x Mannesmann Demag GCH 140 D2/1105 DC motor with brake and speedometer specifications: M7odp Type: GCH 140 D2/1105 375 V 31.5 kW 2800 rpm Brake: 19 - 30 Nm - please ask before purchase with Huebner TDP 0.2 T-4 Speedometer ATTENTION But the connector (Tacho - motor) is missing Wave length: 45 mm Shaft diameter: 32 mm Space requirement LxWxH: approx. 950 x 350 x 350 mm A total of 2 pieces are available The motors are all in a comparable state - the attached images are nevertheless explicitly only an example. Price is understood plus VAT freely loaded warehouse Casting - shipping possible after arrangement and assumption of costs Changes / errors in the technical data as well as intermediate sale reserved Seller Offer No. resale 8160

Artec mini table lathe C2x300 tips size 300 mm + 8 PCs chisel set Mini table lathe C 2 and 8 PCs. HSS cutters set now in the Westfalia savings Kit. C-2 the spindle speed variable from 200-2500 RPM via a potentiometer is adjustable at the mini lathe. About a 80 mm three-jaw chucks can be clamped workpieces easily. The workpieces can be supported with a tailstock with MK 2-recording. By a quad-steel holder the cutters can be secured, designed for 8 mm cutters. Also thread can be cut with this mini lathe 1.5 mm pitch. All materials with normal strength can be edited. (Aluminium brass steel). Technical data: centre height 90 mm centre distance 300 mm spindle bore 19 mm tailstock intake MK-2 thread cutting range 0.2 1.5 mm speed range 200-2500 U / min variable power 250 Watt/230 V Plan route 65 mm Oberweg sled 55 mm Quill trail 50 mm Dimensions Lxwxh approx. 700  ...

Description Brand Pro Froid Model Copeland Scroll ID SH4797 Status Active Year of manufacture 2010 Location Bucure?ti / Bucharest (RO) Old price: 13 500 Euro. 1. Refrigeration and Climate Circuit 1.1. Pro Froid (Franta) GC4/CCR3SH 4PCS15ZC/SC Packed air cool condensing unit: • 3 pcs. Semi-hermetic Piston Bitzer 4PCS 15.2Y compressors • 3 pcs. crankcase heater • 1 pc. Liquid receiver • 1 pc. HP and LP safety pressure switches • 3 pcs. HP safety pressure switches • 3 pcs. LP safety pressure switches • 3 pcs. electric panel boxes – IP 54 • 3 pcs. electrical engine protection devices • 3 pcs. Mounted valves on compressors • 1 pc. Automatic electric panel • 1 pc. oil management system 1.2. Electric and control panel 1.3. air cooled condenser S060 3MSC 6PH/6PL SV 1.4. Helpman / Alfa Laval coolers / ventilators / fans – 17 pcs. 1.5. Electri ...

Industrial PC or control unit EST. technology consisting of various Flexcommander modules: -EST technology Flexcommander power supply 230V, part No.: 008741 -EST technology Flexcommander disk drive floppy, part No.: 0008740 -EST technology Flexcommander CPU, part No.: 0008734 -EST technology Flexcommander Ethernet, part No.: 0008738 -EST technology Flexcommander SLAVE PROFIBUS DP, part No.: 0008737 - EST technology Flexcommander MSR Channel1 + 2, part No.: 00087355 -EST technology Flexcommander MSR Channel1 + 2, part No.: 00087355 The Flexcommander modules are older year manufacture and used (see also images). The function was not tested, therefore no guarantee or warranty.

Gr. Swing diameter: 600 mm Top width: 2200 mm Gr. Grinding diameter on grinding wheel 800 mm Ø: 125 mm Wheels Ø use of put sticks: 20-125 mm Grinding wheel dimensions: 800 x 28-800 x 42 x 305 mm 2 wheel speeds 3 workpiece speed: 32, 55 and 96 RPM Table Shift manual coarse/fine: 10/2 mm Machine. Feed speed of the grinding wheel: 0,005 - 0,025 mm Table 6-speed: 120-1540 mm / min Grinding spindle stock drive: 8 kW Electr. Supply: 380/400 V, 10 kW Space requirements: 6100 x 2300 x 1600 mm Weight: 7T

Key data: 31 , 2800

DC motor with brake 31.5 kW Mannesmann DEMAG GCH 140 D2/1105 used, from spare parts warehouse 1x Mannesmann Demag GCH 140 D2/1105 DC motor with brake and speedometer specifications: Type: GCH 140 D2/1105 375 V 31.5 kW 2800 rpm Brake: 19 - 30 Nm - please ask before purchase with Huebner TDP 0.2 T-4 speedometer Wave length: 45 mm Shaft diameter: 32 mm Space requirement LxWxH: approx. 950 x 350 x 350 mm A total of 6 pieces are available The motors are all in a comparable condition - the images used are nevertheless explicitly only an example. Price is understood plus VAT freely loaded warehouse Casting - shipping possible after arrangement and assumption of costs Changes / errors in the technical data as well as intermediate sale reserved Seller Offer No. resale 8159

Equipment twin multi disc unwind station MTD-AWS-OWK 2 MTD AWS OWK Combination unwinding station 1 MTD-ZSF-LI-MSD Stack pacer LAT 1 LAT-2:1

DC motor with brake 31.5 kW Mannesmann DEMAG GCM 200 D2/0905 used, from spare parts warehouse 1x Mannesmann Demag GCM 200 D2/0905 DC motor with brake specifications: Type: GCM 200 D2/09005 365 V 31.5 kW 95.00 A 1800 rpm 60% ED Brake: 300.0 Nm Wave length: 115 mm Shaft diameter: 55 mm Space requirement LxWxH: approx. 1350 x 500 x 500 mm A total of 9 pieces are available - but not everyone is equipped with a speedometer (5 pieces available) please ask before purchase! The motors are all in a comparable condition - the images used are nevertheless explicitly only an example. Price is understood plus VAT freely loaded warehouse Casting - shipping possible after arrangement and assumption of costs Changes / errors in the technical data as well as intermediate sale reserved Seller Offer No. resale 8158

+ ATTENTION - PRICE DROP! + Prices are rising, ours are falling! + Our prices are reduced by 50% now, + due to warehouse restructuring! + Also, consider taking a look at our other offers in stock. Universal Cylindrical Grinding Machine MSO FFM-U 130/1000 manufacturer: MSO type: FFM-U 130/1000 mach.-Nr.: 16219Mv12438 year of construction: ? comm.-Nr.: 3990505/009 stock-nr.: 1841 + Regular Price: 4.750,- € > Reduced Price: 2.375,- € BN + All prices are shown without taxes (net price) The machine can be used for: outer grinding surface grinding cone grinding Technical Data (According to manufacturer) centre height: 130 mm swing-Ø: 260 mm grinding length: 1000 mm between centres: 1050 mm grinding wheel diameter: 300 mm bore-Ø: 127 mm largest width of grinding wheel for plunge grinding: 40 mm largest total width of a grinding wh ...

Manufacturer: Yale Type: MS15X Type: High-lift truck Load force: 1500 kg Mast: standard Battery: Hoppecke, 24V, 375Ah lifting height: 2768 mm free stroke: 100 mm Gabellaenge: 1160 mm fork width: 570 mm fork thickness: 65 mm fork rail width: 675 mm Number of tyres front: 2 Number of tyres rear: 2 Ideal for the following applications: Operating cycles and multi-shift operation; storage equipment in low or medium-high and high shelving systems; Cooling House Applications -30 oC. Ergonomics 5-point wheel rest and fixed stabilizing wheels provide increased stability and greater safety when cornering. Without mounting gear and fork

Length: 1800mm Lifting height: 500mm Width: 1500mm Height: 2500 mm Number: 4 pieces; very good

MORI SEIKI SH-500/40 Horizontal Machining Center was built in Japan in 1999 by MORI SEIKI CO., LTD. The machine is equipped with a numerical control type MORI SEIKI MSC-502. The milling machine has a table size of 500 x 500 mm and processes workpieces weighing up to 500 kg. The travel range of its X, Y, Z axes is 630 x 600 x 650 mm, respectively. The machine spindle rotates at 12,000 revolutions per minute. The milling machine is equipped with a magazine for forty tools with a maximum tool diameter of 150 mm, length 360 mm and a weight of 12 kg. The milling center is offered at a price with different types of holders. Technical parameters of the MORI SEIKI SH-500/40 CNC milling machine - CNC control: MORI SEIKI MSC-502 Travel range: - X axis (table travel length): 630 mm - Y axis (vertical movement of the spindle head): 600 mm - Z axis (cross table movement): 650 mm - distan ...

ELHA 6 Axis Horizontal Machining Center Xpert-K High-Performance Horizontal Machining Center The newly designed DEPO XPERT K horizontal machining centre offers a high degree of flexibility and above-average productivity. Description Horizontal BAZ The 6 axes are individually controllable. The HSK 100 holder makes it possible to clamp large tools and thus process large areas with high chip removal. Installed is a high-performance G30 fork head spindle with hydromechanical clamping system and a hybrid slewing bearing at top speed which allows extremely high speeds to be driven in order to achieve an optimal milling result even with the smallest tools. This fork head is equipped with a fully automated spindle change cycle, which makes it possible to replace the complete spindle in less than an hour. A hydraulic clamping device is installed for clamping components (effective table ...

Sheet thickness: 3,00 mm Bending length: 1500 mm Number of rolls: 3   MACH-id    5171 MAKE        Birlik TYPE         MSM YOP          2006 SPECIFICATIONS Control       Conventionel Hydraulic / Mechanical      Mechanical 3 or 4 roll       3 roll Maximum sheet thickness      3 mm Bending length       1500 mm Max. Rolling capacity Ø 2.500       3 mm Max. Prebending capacity Ø 2.500         2.5 mm Top Roll Ø     110 mm Bottom Roll Ø      110 mm Side Rolls Ø     110 mm DIMENSIONS Length        2400 mm Width       980 mm Height       1 ...

Control MSX-711-MAPPS IV Double pallet changer. Pallet diameter 500 mm. 2 axes NC swivel round table. B-axis 0.001 / 360. A axle +30/-120 - 0.001. travel distances: X 730 mm, Y 850 mm, Z 1,100 mm. preshoot/ejem up to 50,000 mm/min. Spindle holder HSK-63A. Spindle speeds up to 12,000 rpm. Tool magazine positions: 120. IKZ. Probe. tool load measurement. tool breakage control. usw... Little operating hours - Super condition.; Super

Turning diameter: 923 mm Turning length: 1250 mm Turret positions: 12 Positions ATC: 0   Number controlled axis: 4   CNC Brand: _Unknown / Other CNC Model: mAPS msx 850 III MACH-id    4462 MAKE         Mori Seiki Japan TYPE            NL 2500 Y 1250 YEAR           2008 SPECIFICATIONS Swing over bed    923 Swing   755      Distance between centres         1250 Power kW  live tools        5.5 X Axis       260 Z Axis        1345 Y Axis mm      100 C Axis         360.000 Control       MAPS MSX 850 - III Chip conveyor         Yes Tool eye     Ye ...

MSX-711-MAPPS IV CNC Control Twin pallet changer. Pallet diameter 500 mm. 2-Axis NC Rotary / Swivelling table. B-Axis 0.001° / 360°. A-Axis +30°/-120° - 0.001°. Travels : X 730 mm, Y 850 mm, Z 1100 mm. Feeds / Rapids to 50000 mm/min. Spindle taper HSK-63A. Spindle speeds to 12000 rpm. 120 station tool magazine. Coolant through the spindle. Measuring probe. Tool length measurement. Tool breakage control. etc... Low run hours - Superb condition. ; Super