gas used for sale

220 MW SGT-600 GT Complete Power Plant Duel Fuel Gas Turbine Power Plant Gensets 220.5 Megawatts in total 6 units available, 24.5 Mw each Speed 1,500 rpm, Generator Output 11 kV, Frequency 50 Hz Average running hours 70.000 hours Gas Turbine Power Plant operated predominately on natural gas with standby diesel fuel. Can be converted to alternative fuels as heavy fuel oil . Depends on the demand and needs of the customer. Phase I (5 units, commissioned on 2007) Phase II (4 units commissioned on 2012) Routine preventive maintenance was done for all units under OEM supervision, Emission ISO Standard at 15% O₂ Original Dry Low NOX ( DLE ) Combustion Chambers Inertial Filtration and Single Stage F9

Gas Engine Generator Set (CHP/BHKW) Waukesha 16V150LTD for natural gas Serial number 700036 Stamford generator P.I734C2 400V/231V50Hz, 1327 KVa 1785 Amp year 2009 Serial number C265013/1 Scope of delivery: - Generator set - Control panel - Gasline section as displayed

Machine type MIG/MAG welding system MerkLE brand Type M 210 K Connection voltage 230/400 volts Setting range 25 – 210 amps Duty cycle 15 % ED at 210 Ampere 60% ED at 80 amps Current adjustment infinitely variable Cooling transformer by built-in fan Cooling burner gas-cooled Version of mobile compact system Wire feed gearbox 4-roller drive DV 25 Fuse 16 amps Dimensions L x W x H 855 x 390 x 585 mm Weight 75 kg Special accessories point and interval device Adapter for 230/400 V Age approx. 25 years Condition workshop tested, good incl. UVV test report Scope of delivery welding system with the following accessories: 1 piece welding torch SBT 157 G, 3 mtr. long 1 piece ground cable 1 piece pressure reducer with 2 pressure gauges 1 roll welding wire D 300, 5 kg 1 piece hand shield 1 piece attachment glass 90 x 110 mm white  ...

Key data: 250 KW, 310 kVA, 400 V

UK Power Generators LTD have Containerised Package of 250kW Gas Generator for sale, see below the technical specification of the unit: Make: Scania Model: 6R20.1BO Rated Output: 250 kWe Fuel : Gas Serial No: 003837 YOB: 2014 Volt: 400 V Frequency: 50 Hz Speed: 1500 RPM Type: Containerised The unit has been maintained throughout its life and available on request upon inspection. The Containerised Package include the exhaust silencers, air ducting and table cooler radiator (pictures are attached). For any further enquiry and pricing information, feel free to reach us at: Enquiriesukpowergeneratorsltd 00447956518924

Power: 5000 kVA / 4000 kW Year of construction: 12/1992 Current: 275 A Voltage: 10.5 KV Frequency: 50 Hz Rotation: 1500 rpm Weight: Approx. 13.6 to. Protection class: IP 23 In 2017/2018, the following work was carried out: Stand winding in insulation class F completely renewed Inductor finely balanced and refurbished at nominal speed Reman refurbished plain bearings Other parts overhauled Tested and test run 2019 Prior sale reserved - errors possible

LHS Lagertechnik, supplier of new and used storage technology. We provide you with racking systems, industrial trucks, accessories and other warehouse inventory. In this ad, you will buy as follows: - Nilfisk SR1500 HP Sweeper - Serial number: 50602935 - Drive GAS - Hours: 470 - Operating length: 1:800 mm - Operating width: 1,200 mm - NEW UVV -Headlight Device works and can be tested on site Self-pick-up welcome / Free loading / Shipping can be organized nationwide / Please inquire about your transport costs. Sale of used goods without guarantee and warranty. Errors / prior sale of used goods expressly reserved.

TO WHOM IT MAY CONCERN; WE VE GENUINE 3 PCS MAN NR 34 / S 114. COMPLETE EXHAUST GAS TURBOCHARGER WITH SILENCER AT AT OUR STOCK. IT IS OVERHAULED & TESTED ON TRIAL ENGINE OPERATION . PLS FIND SPECT AT BELOW. TYPE NR34 / S 114 SERIAL NO SMM0965 t max . 650 C n max 26300 1/min YOB 2012 -09 . MADE IN MAN ENTPACO IF YOU VE ANY FURTHER QUESTIONS PLS DO NOT HESITATE TO CONTACT WITH US . Capt. Ayhan Ugurluba BEST REGARDS; Aliaga marine services E mail: info/aliagamarine.com PHN/fax: +90 232 618 03 90 Mobile: + 905556084850 aliagamarine.com TURKEY

Agilent 5975C XL inert MSD with Agilent GC 6890 N GC Agilent 6890 N, Injector Split/Splitless, MSD 5975 C inert XL with EI,Turbopump,Fastscan Edwards Backing Vacuum Pump 1.5 Agilent Productivity Chemstation E02.02 on PC/Win 10 complete with all cables, Option: Agilent Liquid Sampler, Sampler/ CTC or Gerstel MPS 2) The system is ready for installation and ready for operation current service Installation at extra charge on request

A complete power plant consisting of 3 JEBANCHER units is now available. Below are the details: 2x Engines Model J616C - Power: 2519 kVA (2.519 MW each) - Overhauled (E60) in 2011 - Operating hours since overhaul: 20,503 hours - Manufacture date: 1997 - Serial numbers: 1200959 / 1200956 1x Engine Model J320 GS S04 - Power: 1366 kVA (1.366 MW) - Overhauled (E60) in 2011 - Operating hours since overhaul: 19,059 hours - Manufacture date: 1997 - Serial number: 1200954 Total power capacity: 2 x 2.519 MW + 1.366 MW = 6.404 MW Scope of supply includes: - XT3 Diane control panel - GEC ALSTHOM transformers: 3 units (2x 2500 kVA, 1x 1600 kVA) - Gas line - Heat exchanger - Smoke exchanger - Pumps - Table cooler (radiators) - Oil tank Location: Paris, France For more information, please feel free to contact us.

Agilent 5973 N inert MSD with GC Agilent 6890 N Network Agilent 5973 inert MSD with EI and turbomolecular pump enhanced BOC Edwards Turbopump Agilent GC 6890 Network with Split/Splitless Injector/EPC Edwards Vacuum Pump 1.5 MSD Productivity Chemstation E02.02 on PC/Win 10 NIST on request Option: Agilent Liquid Sampler, CTC or Gerstel MPS2 Sampler currently maintained/with warranty Installation on request

Key data: 750

(Deutz) MWM2016 V16 Natural Gas Generator Set. Model: (Deutz) MWM2016 V16 Fuel: Natural Gas Year: 2007 Hours: 40,460 Capacity: 750 kW Hz: 50 Voltage: 400 V Scope of supply: Complete containerised genset including Engine, Marelli Generator, Frame, Control System, Gas Line, Radiator, Gas Filter and other accessories. Complete contarised genset. Very good condition. Turnkey ready to run now. A new crank was installed on 35,000 hrs. Available for sale from Gas Engine Exchange. Please check our complete range of equipment at gasengineexchange.com.

Machine type MIG/MAG welding system Eurotronic brand Type MAG 3000 EC Connection voltage 3 x 400 Volt Setting range 30 – 300 amps Duty cycle 35 % ED at 300 Ampere 60% ED at 230 amps 100% ED at 190 amps Current setting 12 switching stages Cooling transformer by built-in fan Cooling burner gas-cooled Version of mobile compact system Wire feed 4-roller drive Fuse 16 amps Dimensions L x W x H 860 x 490 x 650 mm Weight 78 kg Age approx. 5 years Condition workshop tested, very good, incl. UVV test protocol Scope of delivery welding system with the following accessories: 1 piece welding torch 3 mtr. long 1 piece ground cable 1 piece pressure reducer argon with 2 pressure gauges 1 roll of welding wire D-300 coil, 5 kg 1 can of non-stick spray 1 piece spare parts box, kpl. Equipped 1 pair of welding gloves 1 piece instruction manual  ...

Machine type TIG inverter welding system gas-cooled DC and AC system Merkle brand Type LiteTIG 190 AC/DC Connection voltage 1 x 230 Volt Setting range 5 – 190 amps Duty cycle 25 % ED at 190 Ampere 60% ED at 140 amps 100% ED at 115 amps Current adjustment infinitely variable weldable material thickness 5 mm Cooling inverter by built-in fan Cooling burner gas-cooled Version portable mounting system Fuse 16 amps Dimensions L x W x H 410 x 150 x 240 mm Weight 7.4 kg Age 6 months Condition workshop tested, as new, incl. UVV test protocol Scope of delivery welding system with the following accessories: 1 piece TIG burner 4 mtr. long 1 piece ground cable 1 piece pressure reducer with 2 pressure gauges 1 pair of TIG gloves 1 piece spare parts box kpl. Equipped 24 months warranty 1 piece instruction manual List factory price ex ...

Machine type MIG/MAG welding system equipped for steel wire in 1.0 mm Rehm brand Type RD 250 Connection voltage 3 x 400 Volt Setting range 35 – 250 amps Duty cycle 40 % ED at 250 Ampere 60% ED at 210 amps 100% ED at 170 amps Current setting 10 switching stages Cooling transformer by built-in fan Cooling burner gas-cooled Version of mobile compact system Wire feed gearbox 4-roller drive Fuse 16 amps Dimensions L x W x H 900 x 465 x 855 mm Weight 81 kg Age approx. 15 years Condition workshop tested, good incl. UVV test report Scope of delivery welding system with the following accessories: 1 piece welding torch, 3 mtr. long 1 piece ground cable 1 piece pressure reducer with 2 pressure gauges 1 roll welding wire D 300, 5 kg 1 piece hand shield 1 piece attachment glass 90 x 110 mm white 1 piece of protective glass 90 x 11 ...

MWM TCG 2020 V 12 (ready to install) MN: 2204405 Circumference: - Crankcase incl. new bearing - Crankshaft (Std-Maß) incl. new bearing - Camshaft (12301190 / 12301191) incl. new bearing - Wheel operation incl. wheel box lid - Flywheel housing - Oil pump with oil suction pipe - Oil pan - Pestle (12453142) - Oil pressure valve On request, the scope can be extended (e.g. pistons, liners, cylinder heads, etc.) The offered part motor can also be used as TBG 620. The engine is not sold as a replacement engine. Measurement protocols are included. Please contact us for a written quote.

Key data: 1500

2 x JENBACHER Jen 420-GS-B25 Biogas Generator Set Model: Jen 420-GS-B25 Fuel: Biogas Year: 2012 Hours: 85,000 Capacity: 1,500 kW HZ: 50 Voltage: 400 V Scope of supply: Complete generator set including Engine, Alternator, Frame, Control system, Gas line, generator switch and other accessories. Service History Status: Rebuild done at 60,000h Available for sale from Gas Engine Exchange. Please check our complete range of equipment at gasengineexchange.com.

Key data: 2700 KW, 11000 V

Jenbacher 620 Containerised Gas Generating Set with 2.7 MW of Output Power Manufacturer: Jenbacher Model: J620 Year of remanufactured: 2023 Voltage: 11kV Power Output: 2.7 MW Frequency: 50 Hz Speed: 1500 RPM Additional Features for these Units: Brand New Units: All units are newly remanufactured. High-Quality Containers: Premium containers with diamond deck flooring. Exterior Construction: Durable green steel casing. Ventilation: Large louvered vents on upper sections for optimal airflow. Access Doors: Secure entry doors with labelled panels for easy identification and access. Exhaust Stacks: Large black exhaust silencers for noise reduction and efficient emission handling. Foundation: Elevated on sturdy metal supports for stability and ease of maintenance. Table Cooler Radiators: For efficient cooling. Exhaust Silencers: For noise emissio ...

Available for sale 1 x 260 kW Gas genset Guascor SFGLD 180. Unit prepared to work in isle mode. The genset is in our installations and is in great working conditions.

Available for sale 1365 kW MWM TBG 620 V16 inside container. Equipment in good working conditions.

Available for sale 1 x 3500 kW MWM TBG 632 V16. Equipment in good working conditions.

Key data: 2188 KW, 2702 kVA, 6300 V

CHARACTERISTICS OF GENSET ✓ Jenbacher J616 G.S-NL | YOM 2004 | Power 2,188 kWe | Natural gas Generator AVK 2,702 kVA | 6,300 V | 50 Hz | cosφ= 0.8 AVAILABLE EQUIPMENT ✓ Genset with auxiliaries included Diane XT control panel and synchronizer ✓ Generator high voltage switchgear 6.3 kV, protections cabinet ✓ Lub oil system, gas valves, crane, radiators HT circuit, cooling towers LT circuit, heat exchangers, control valves, water and oil pipes, exhaust silencer. ✓ Documentation related to the installation. CURRENT STATUS OF PLANT ✓ Plant stopped in 2023 due to commercial reasons. ✓ Genset crankshaft it is turned periodically. ✓ Run test is possible but with some associated costs: necessary filling lub oil circuit with new clean oil, and some minor checkings. ✓ Genset was always maintained under LTSA by Jenbacher ✓ Genset history: No failure ...

Available for sale 1365 kW MWM TBG 620 V16 K. Equipment in good working conditions.

Available for sale 1400 kW MWM TBG 620 V16 K. Equipment in good working conditions.

Machine type MIG/MAG welding system Brand Rehm Type Magnum 182 Supply voltage 230/400 volts Setting range 30 – 180 amperes Duty cycle 25 % ED at 180 amps 60% ED at 140 amps 100% ED at 100 amps Current setting 6 switching stages Cooling transformer by built-in fan Cooling burner gas-cooled Design of mobile compact system Wire feeder 2-roller drive Fuse 16 Ampere Special device 2-stroke/4-stroke Points/Interval Dimensions L x W x H 760 x 320 x 580 mm Weight 53 kg Age approx. 20 years Condition workshop tested, very good, incl. UVV test report Scope of delivery welding system with the following accessories: 1 piece welding torch, 3 mtr. long 1 piece ground cable 1 piece pressure reducer argon with 2 pressure gauges 1 roll of welding wire D-300 coil, 5 kg, 8.0 mm Ø 1 can non-stick spray 1 piece hand shield 1 piece protect ...

Key data: 2745 KW, 3400 kVA, 6300 V

CHARACTERISTICS OF GENSET ✓ Jenbacher J616 G.S-NL (GS-J11 engine) | YOM 2016 | Power 2,745 kWe | Natural gas Generator Leroy Somer 3,400 kVA | 6,300 V | 50 Hz | cosφ= 0.8 AVAILABLE EQUIPMENT ✓ Genset with auxiliaries included Diane XT control panel and synchronizer ✓ Generator high voltage switchgear 6.3 kV ✓ Step-up transformer EFACEC 6.3/15 kV 3,500 kVA (YOM 2017) | Auxiliaries transformer ✓ Lub oil system, gas valves, crane, radiators HT circuit, cooling towers LT circuit, heat exchangers, control valves, water and oil pipes, exhaust silencer. ✓ Documentation related to the installation. CURRENT STATUS OF PLANT ✓ Plant stopped in 2023 due to commercial reasons. ✓ Genset is kept hot and crankshaft it is turned periodically. ✓ Genset is ready to run. ✓ Genset was always maintained under LTSA by Jenbacher ✓ Genset history: No failure ...

Key data: 400 KW

MAN E2842 LE322 Complete TRIGENERATION Plant Hours 14,500 Year 2017 Fuel NAT GAS Voltage: 400 V Scope of supply: The plant includes Engine, Alternator, Prefabricated Room, Intercooler, Skid, Aircooler, Gas Ramp, Radiator, Heat Exchanger, New / Exhaust Oil Exchange System, Exhaust Gas Chimney, Control Panel (Siemens), electrical panels, silencer, gas compressor, metering systems, pumps, chiller, afterburner, various stainless steel pipes. Capacity 401 kW. It is currently limited to 355 kW to work with low emissions. Also available in a cogeneration-only setup (180,000 €). Available for sale from Gas Engine Exchange. Please check our full range of equipment at gasengineexchange.com.

Manufacturer: CATERPILLAR Model: G3516B LE Type: Stationary to Gas Working Cycle: 04 times water cooled Nominal Rotation: 1,800 RPM Number of Cylinders: 16 Cylinders, arranged in V Piston diameter --mm: 170 mm Piston stroke -mm: 190 mm Engine Volume: 69 Liters Compression Ratio: 11.1:1 Suction: Turbocharged, Post-Cooled Fuel System: Electronic Ignition System Quantity: 02 units

Key data: 8000 KW, 7425 kVA, 11000 V

CHARACTERISTICS OF GENSET ✓ Wärtsila 16V32SG | YOM 2015 | Real power of the motor is 8.000 kW (in plate) | Effective design power was reduced to 7.400 kW in order to get adapted to legal power stated at permits (there was a gas turbine in this plant before installing this Wärtsilä genset) | Fuel: Natural gas ✓ Generator ABB 7,425 kVA | 11,000 V | 50 Hz | Cos = 0.98 AVAILABLE EQUIPMENT ✓ Genset with auxiliaries included control panel and synchronizer ✓ Generators high voltage switchgear 11 kV, protections cabinet ✓ Lub oil system, gas valves, crane, radiators HT circuit, cooling towers LT circuit, heat exchangers, control valves, water and oil pipes, exhaust silencer. ✓ Main step-up transformer SIEMENS 8000 kVA | 11 / 15 kV | YOM 2015 ✓ Auxiliaries transformer EFACEC 400 kVA | 0.4 / 15 kV | YOM 2009 ✓ Heat recovery boiler for steam generation | Y ...

Key data: 1487 KW

CUMMINS GQSK60 Gas Generator – In Excellent Condition! Looking for a reliable, powerful, and immediately available gas generator? The CUMMINS GQSK60 is the perfect choice for your needs. This generator is in excellent condition and has low operating hours. CUMMINS GQSK60: Excellent condition Low operating hours: Enjoy efficient operation with plenty of potential for many years of trouble-free use. Immediately available: No long wait times Fully equipped: The generator comes complete and ready for installation, including the control panel, breaker, gas line, exhaust silencer, and cooling system. Simply connect the gas and power supply. GAS POWER HOLLAND

Available in stock 2 x Used RMG Solenoid Gas Valves DN65 PN16, model 01-EVA 25 NH-4. We also have other elements of the gas train available, namely: 1 x Ball Valve DN65 PN16 with pressure switch 1 x Gas Filter DN65 PN16 1 x Gas Pressure Regulator DN65 PN16 The equipment is used but in good working conditions. VDC: 24 Power: 70 W Maximum Inlet Pressure: 0.1 bar Environment Temperature: -20ºC to +60ºC

Key data: 2679 , 6300

Available One complete Jenbacher 616 plant from 2016, with 33,000 operating hours. All maintenance has been performed by the official service. The engine has a power output of 2,679 kW and an electrical output voltage of 6,300 V. The generator brand is Leroy Somer. Scope of supply includes: Genset, cooling system, transformer, DIANE XT4 control system, fans, generator circuit breaker, gas train, low and high temperature pumps and heat exchangers, silencer, and heat recovery system from exhaust and oil. The plant is disassembled and ready for loading at our warehouse. Boroscope inspection, maintenance records, and inspection reports are also available. You are welcome to visit and inspect the assets at any time.

Available in stock 1 x Used Bryan Donkin RMG Gas Pressure Regulator RMG-BD226 (FIG 226 ZSO-ECL). Designed primarily for control of fuel feeds to industrial and commercial burners, heater units, boilers and other items of equipment where an accurate, safe and reliable controlled pressure is required. We also have other elements of the gas train available, namely: 1 x Ball Valve DN65 PN16 with pressure switch 2 x Solenoid Valves DN65 PN16 1 x Gas Filter DN65 PN16 The equipment is used but in good working conditions. Outlet Pressure Range: -3 mbar to 3 mbar Maximum Inlet Pressure: 0.1 bar DN 65 PN 16

Available in stock 9 x Used Capstone Gas Fuel Injector. Most commonly used for Microturbines C60. The units are used but are in good working conditions. Note: We have several Capstone parts in our stock to sell. If you are looking for something in particular, please contact us and we will see if we have anything to fulfill your request.

Engine Make Jenbacher Engine Type 620 Power KW/RPM 2801/1500 Fuel Natural-Gas Generator Model 400 Volts Hz 50 Year of Manufacturing 2001 Running Hours 75.000

EKU PXL 80M Lava stone grill EKU PXL 80M Lava stone grill Stand-alone unit Height-adjustable stainless steel V-grill grate W 800 x D 750 x H 850 mm 2 heating zones Piezo ignition Substructure open V-rust 17 kW Gas More lava stone crickets in other sizes - new and used - can be found in our shop! International shipping costs on request!

Engine Make JENBACHER Engine Type J 616 GS C02 Power KW 1942 KW RPM 1500 Fuel Natural Gas Generator Model Stamford Volts 690 Hz 50 Year of Manufacturing 1999 Running Hours 15.000

Engine Make MWM Engine Type TCG 620 V16 L Power KW/RPM 1358 / 1500 Fuel Gas Volts 400 Hz 50 Year of Manufacturing 1997 Running Hours

COMPLETE POWER PLANT OF 16 MEGAWATT 4 pieces MWM 2032V16 Year of manufacturing 2011 Running hours: #1 at 18607 operating hours #2 at 12261 operating hours #3 at 17068 operating hours #4 at 19206 operating hours Scope: Generator sets Control panels Gasline Pumps Heat exchanger Tranformers Break panels Silincer 00316 38 63 90 71 GAS POWER HOLLAND

Arc welder Type: Euromag 35-2 Manufacturer Messer Griesheim

Arc welder Manufacturer: Oerlikon Type: Minicito

Machine type MIG/MAG inverter welding system Brand Mahe Type Eco MIG 300 Digital Supply voltage 3 x 400 volts Setting range 10 – 300 amperes Duty cycle 40 % ED at 300 amps 60% ED at 240 amps Current adjustment infinitely variable incl. wire automatic Cooling inverter by built-in fan Cooling burner gas-cooled Design of mobile compact system Wire feed gearbox 4-roller gearbox Fuse 16 Ampere Dimensions L x W x H 880 x 400 x 635 mm Special accessories wire switch without power for threading TIG DC, without RF Rod electrodes weldable Weight 34 kg Age as good as new Condition workshop tested, as new, incl. UVV workshop test report Scope of delivery welding system with the following accessories 1 piece welding torch 3 mtr. long 1 piece ground cable 4 mtr. long 1 piece pressure reducer argon with 2 pressure gauges 1 roll of weldin ...

Key data: 812 KW, 400 V

Complete 812kW containerised CHP Himonsia / Siemens HGS-810 T5 LPG generating set Make and model: Himonsia / Siemens HGS-810 T5 LPG Scope of supply: 40ft Container (67dBA1m), Engine (Siemens), Alternator (Stamford), Control Panel (Comap Controller), Remote Radiator and Heat Exchanger. The Engine is currently being rebuilt with 4 x heads already replaced and the following spares available with the unit: 7-cylinder head gasket kits 1-cylinder head 1- exhaust manifold section 1-water temperature sensor Maximum service cost estimated at £30,000. Available for sale from Gas Engine Exchange . Please check our full range of equipment at gasengineexchange.com.

Machine type MIG/MAG inverter welding system Brand Mahe Type Eco MIG 300 Analog Supply voltage 3 x 400 volts Setting range 10 – 300 amperes Duty cycle 30 % ED at 300 amps 60% ED at 240 amps Current setting 12 switching stages Cooling inverter by built-in fan Cooling burner gas-cooled Design of mobile compact system Wire feeder 4-roller drive Fuse 16 Ampere Dimensions L x W x H 880 x 400 x 635 mm Special accessories wire switch without power for threading Rod electrodes weldable Weight 34 kg Age as good as new Condition workshop tested, like new, incl. UVV test protocol Scope of delivery welding system with the following accessories: 1 piece welding torch 3 mtr. long 1 piece ground cable 1 piece pressure reducer argon with 2 pressure gauges 1 roll welding wire D-300 coil, 5 kg 1 can non-stick spray 1 piece spare parts box, k ...

Key data: 130 , 400

Complete Containerised Trigeneration Tedom Genset 130kW Natural Gas. Fuel: Natural gas Year: 2017 Hours: 12,000 Capacity: 130 kW HZ: 50 Voltage: 400 V Scope of Supply: Engine, Alternator, Frame, Control System, Gas Line, Absorber, Cooling Tower, Water pumping system. Available for sale from Gas Engine Exchange . Please check our complete range of equipment at gasengineexchange.com.

Machine type MIG/MAG inverter welding system Make RILAND Type MIG 180PGDM Supply voltage 1 x 230 volts Adjustment range 15 – 180 amperes Duty cycle 20 % ED at 180 amps 60% ED at 110 amps Current adjustment infinitely variable Cooling inverter by built-in fan Cooling burner gas-cooled Portable assembly system version Wire feed gearbox 2-roller gearbox Fuse 16 Ampere Dimensions L x W x H 386 x 170 x 300 mm Special accessories TIG welding DC without HF E-welding Weight 8 kg Age 2 years As good as new Scope of delivery welding system with the following accessories: 1 piece welding torch MB 24, 2 mtr. Long 1 piece pressure reducer argon 1 piece ground cable 3 mtr. long, 16 sq m 1 piece electric welding cable 3 mtr. long, 16 sq m 1 piece of aluminum equipment 3 power nozzles aluminum, 1.0 mm Ø 3 pieces of current nozzles stee ...

Key data: 2700 KW, 1500 1/min

Jenbacher 620 Gas Genset Containerized Complete Package - TURNKEY solution to your tailored energy need. Containerized Jenbacher 620 with 2.7 MW unit is available for immediate sale. 2 x units with 2.7 MW is available for sale. Why to procure the Jenbacher from us? No Lead Time Units available straightaway Opportunity to move quickly Scope of supply includes: Fully Enclosed Containerized System: The entire system is pre-assembled and housed in a sturdy, weather-resistant container, making transportation and installation hassle-free. • Exhaust Silencers: Designed to keep noise levels low without compromising performance, making the system perfect for urban and noise-sensitive areas. • Table Cooler Radiators: These are included to help maintain optimal operating temperatures and enhance the lifespan of the generator. • Fuel System & Elec ...

Key data: 65

MAN E0826 E302 Natural Gas Generator Set for sale. Model: MAN E0826 E302 Fuel: Natural Gas Year: 2004 Capacity: 65 kW Hz: 50 Voltage: 400 V Scope of supply: Engine, alternator, acoustic canopy with panels, exhaust gas heat exchanger and other accessories. Available for sale from Gas Engine Exchange. Please check our complete range of equipment at gasengineexchange.com.

Engine Make SCANIA Engine Type Schnell 6R20.1B Power KW/RPM 265 / 1500 Fuel Gas Generator Model STAMFORD Volts 400 Hz 50 Year of Manufacturing 2014 GAS POWER HOLLAND 00316 38 63 90 71 (whatsapp)

Key data: 3000 KW, 1500 1/min

Jenbacher 620 Gas Genset Containerized Complete Package - TURNKEY solution to your tailored energy need. Containerized Jenbacher 620 with 2.7 MW unit is available for immediate sale. 2 x units with 2.7 mW is available for sale. Why to procure the Jenbacher from us? No Lead Time Units available straightaway Opportunity to move quickly Scope of supply includes: Fully Enclosed Containerized System: The entire system is pre-assembled and housed in a sturdy, weather-resistant container, making transportation and installation hassle-free. • Exhaust Silencers: Designed to keep noise levels low without compromising performance, making the system perfect for urban and noise-sensitive areas. • Table Cooler Radiators: These are included to help maintain optimal operating temperatures and enhance the lifespan of the generator. • Fuel System & Elec ...

The power plant, based on a 5 MW gas turbine CENTRAX 501 KB7 is complete with all needed equipment, allowing a steam output of 20 tons per hour at 20 bar. From ZERO hours until the last working day all maintenance was performed by Centrax under full maintenance contract.