gas power plant used for sale

Pressure:175 t chamfer lenght:4100 mm distance between columns:3600 mm column arm:410 mm ram stroke speed:180 mm/sec return speed:135 mm/sec working speed:10 mm/sec work stroke:275 mm oil volume:200 l dayligth:550 mm table height:900 mm table width:90 mm total power requirement:15 kW weight of the machine ca.:12000 kg dimensions of the machine ca.:5100 x 2150 x 2850 mm

Hydraulic motor Manufacturer : Rotary Power Article: SMA 1430 C1 182 Condition : New

Key data: 520 mm, 520 mm

Parotec Face Plate Pallet PowerGrip 160 Stitch Partool Zero Point Clamping System Face plate custom-made by a sister company von Schunk. Such a face plate for the Parotec is not available for sale. Very good used condition. Various milling on the top, see pictures the dimensions can be found in the pictures. Weight approx. 50kg. There are other Parotec accessories in stock Other used interchangeable plates, a steel groove plate, You will receive an invoice in paper form. For this item, VAT (19 percent) is shown on the invoice.

Key data: 318 t, 318

Parotec Face Plate Pallet PowerGrip 160 Stitch Partool Zero Point Clamping System Face plate custom-made by a sister company von Schunk. Such a face plate for the Parotec is not available for sale. Very good used condition. Various milling on the top, see pictures the dimensions can be found in the pictures. Weight approx. 50kg. There are other Parotec accessories in stock Other used interchangeable plates, a steel groove plate, You will receive an invoice in paper form. For this item, VAT (19 percent) is shown on the invoice.

Key data: 318 t, 318

Parotec Slot Plate Pallet Power Grip 160 Stitch Partool Zero Point Clamping System Very good used condition. the dimensions can be found in the pictures. Weight approx. 30kg. There are other Parotec accessories in stock More used interchangeable plates, one face plate D.52cm You will receive an invoice in paper form. For this item, VAT (19 percent) is shown on the invoice.

x-travel: 8000 mm y-travel: 1000 mm z-travel: 1250 mm dividing head: CNC chip conveyor: Universal angular milling head 2-axis adjustable: control: Fagor type: 8025 : CNC clamping plate: 1500x3000 mm clamping plate: 1500x4000 mm clamping plate: 1500x4000 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Two (2) Surplus/Never used, Mobile Substations 25/30 MVA, 115/13.8 kV. 60 Hz. 3 Phase, with ODTF1/ODAF2 cooling, YNd1 Connection, Cooper Windings, on a low bed chassis trailer, HV Surge arrester, High Capacitive Voltage transformer, 145 kV Hybrid Switchgear, Outdoor Circuit Breaker Roof Bushing, Control and Protection Panel, Battery Charger, Batteries and all the auxiliary equipment for this substation.

Laser cutting machine Type: Platino Fiber Manufacturer: Prima Power Year: 2018 Hours machine on: 15000 Hours laser on: 8200 Laser: 4000 W Machine in good condition, under power Find more here - / Contact us at -

Manufacturer: SHW Type of Machine: PowerSpeed 5 Condition: used Find more here - / Contact us at -

CNC turning-milling center Emco Hyperturn 65 Powermill SMYB Commissioning 7/2019 At call! Siemens 840D-SL Shopturn Main spindle BigBore spindle passage 76mm KK8 - 4,000 1/min Sub-spindle KK6 - 5,000 1/min 40-speed chain magazine HSK-T63 Turret bottom VDI30 / Sauter Electronic handwheel Emco Tool Breakage and Wear Gear milling Shopturn Expansion Pack 5-axis simultaneous machining Energy management for Sinumerik OPC UA / Siemens interface 3D machine model Emco Standard Bar Feeder Interface Machine Status Lamp LED Multiflow Cleaning Gun Oil Mist Separator Belt filter system with IKZ Main Spindle Clamping Hook Hainbuch Clamping Top Mini Combi Ax Hoist Sub-spindle Schunk 185mm THW-plus with hard jaws The options list is complete! No interest in dealer enquiries! No separate dealer price! WB mechanics GmbH is a precision mechanics workshop that markets its ...

CNC turning-milling center Emco Hyperturn 65 Powermill SMYB Commissioning 10/2017 At call! Siemens 840D-SL Shopturn Main Spindle SuperBigBore Spindle Passage 95mm KK8 - 3,500 1/min Sub-spindle KK6 - 5,000 1/min Milling spindle HSK-T63 12,000 1/min / new milling spindle 2024 40-speed chain magazine HSK-T63 Turret bottom VDI30 / Sauter Electronic handwheel Emco Tool Breakage and Wear Gear milling Shopturn Expansion Pack 5-axis simultaneous machining Energy management for Sinumerik OPC UA / Siemens interface 3D machine model Emco Standard Bar Feeder Interface Machine Status Lamp LED Multiflow Cleaning Gun Oil Mist Separator Belt filter system with IKZ Main Spindle Clamping Hook Hainbuch Clamping Top Mini Combi Ax Hoist Sub-spindle Schunk 185mm THW-plus with hard jaws The options list is complete! No interest in dealer enquiries! No separate dealer price!  ...

Manufacturer: Homag, Type: Power FL 14/10/12/CF, Year: 2004, Control: yes, Number of milling spindles: 4, Required space L x W x H mm: 8400x4750, Year :2004

SPECIFICATIONS: Length of pre-planer machine inlet: 2200 mm Machinable width: 230 mm Machinable height: 120 mm Spindle: Ø 40 mm Number of Spindles: 5 Cardan shaft drive Speed: 8000 rpm Voltage: 380 V Spindle configuration: 1: Bottom (5.5 kW) 2: Right (5.5 kW) equipped with PowerLock HSK 3: Left (5.5 kW) equipped with PowerLock HSK and electronic control 4: Top (5.5 kW) with PowerLock HSK and electronic control 5: Bottom (5.5 kW) equipped with PowerLock HSK EQUIPMENT: Complete with milling

Manufacturer: Indramat, Type: Power Supply, Model: KDV 2.2-100-220/300-220, Serial number: SN234691-02992 A05,

Offer 24573 Specifications: - Cutting wheel diameter up to 356 mm - Separation capacity up to 120 mm -Mot. Cutting Feed -One. Transverse infeed 120 mm - Table dimensions 410 x 310 mm - Table travel 220 mm - Drive 400 V / 5.5 kW - Coolant device - Space requirement approx. W 1500 x H 1800 x D 1050 mm - Weight approx. 850 kg

Manufacturer: Siemens, Type: SITOP power 20, Serial number: 6EP1 436-2BA00, Power Input: 50/60Hz, Power Output: 22,8-26,4V,

Manufacturer: Siemens, Type: Sitop power 20, Modell: Power Supply, Power Input: 400-500 Volt 1,2 Ampere, Power Output: 24 V /20 Ampere,

Manufacturer: Klöckner, Type: Power Supply, Modell: EM4-111-DR1, Seriennummer: 02-5376,

Salvagnini Power Supply PSU 100

Manufacturer:Weinig Model: Powermat 500 Year of Manufacture: 2009 Type of Machine: Planer with automatic return. Likely Use: Wood processing, particularly profiling and planing of wood components. Find more here - / Contact us at -

KIMLA POWERCUT LF 1530 6 kW fiber laser for tubes and sheet metal was built in 2021 in Poland. The reliable machine built on a rigid monolithic body equipped with state-of-the-art fibre technology guarantees the achievement of very smooth and even edges along the entire length of the workpiece, regardless of the machined material. The sheets are cut with a high-quality 6 kW fibre optic beam on a steel work table with integrated automatic pallet changing system, which allows uninterrupted machining by simultaneous loading and unloading of the workpieces during the cutting process. All cutting parameters are programmed in the intelligent PC-CAM CNC controller, which allows for very fast and dynamic operation with excellent accuracy. The KIMLA fibre laser cutting machine is also equipped with an integrated cutting system, extending the machine’s machining capabilities to include the cu ...

A Finn-Power CNC punching press is available. Press force: 300kN, max. workpiece width: 4061mm, max. workpiece length: 1528mm, max. workpiece thickness: 8mm, max. workpiece weight: 200kg, quick chuck X/Y: 80m/min/60m/min. Turret head positions: 20, turret head speed: 30rpm, tool type: thick turret, max. tool diameter: 89mm. Travel speed: 100m/min, drilling accuracy: 0.1mm, positioning accuracy: 0.08mm, oil tank capacity: 330l, max. operating pressure: 300bar. Machine dimensions X/Y/Z: approx. 5900mm/6300mm/2500mm, weight: approx. 13500kg, control: Siemens Sinumerik 840D. The table of the machine has been extended. Without machine housing. Documentation available. On-site inspection is possible.

A Prima Power CO2 laser cutting system is available. 1) Prima Power Platino 1530, year of manufacture: 2011, travel X/Y/Z: 3000mm/1500mm/150mm, rapid traverse: 100m/min, position accuracy: 0.03mm. 2) Prima Power CP 3000, year of manufacture: 2010, laser power: 3000W, power stability: +/- 2%, wavelength: 10.6µm, laser diameter: 19mm, dimensions X/Y/Z: approx. 900mm/3100mm/900mm, weight: approx. 1200kg. Documentation available. On-site inspection is possible. Available from Q1 2025.

A rack for DC power modules with two electrical housing units is available. Power module Phoenix Contact Charx Power 30kW, max. voltage AC/DC: 3x 530V/1000V, rated power: 30kW, efficiency: over 95%, dimensions X/Y/Z: approx. 483mm/134mm/550mm, weight: approx. 31kg. Including two electrical housing units. Documentation available. On-site inspection is possible.

weight max.: 1200 kg workpiece diameter: 20 - 800 mm total power requirement: 0,75 kW traversing speed: 80 - 1600 mm/min weight of the machine ca.: 56 kg range L-W-H: 520 x 470 x 390 mm - For machining cylindrical workpieces - Flat frame - Castors with polyurethane coating - Clear controls - Infinitely variable speed - The control electronics are of a robust and closed housing protected - With foot switch for start/stop - Drive with DC electric motors and gears The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Clamping force: 110 t Screw diameter: 22 mm Shot volume: 41 cm3 Screw L/D ratio: 20 Calculated stroke volume : 41,8 cm3 Correct injection pressure : 2,864 bar Max. screw speed : 500 min Screw tongue : 150 Nm Nozzle path contact force : 250/40 mm/kN Injection flow outside : 76 cm3/s Cylinder heating capacity : 6,3 kW Number of heating zones : 4 Working hours: 35.953 hours Type: Horizontal Drive: Electric

AL-KO POWER UNIT 250 P - Exhibition machine -Pre-separator integrated, automatic extinguishing system integrated---------- Technical data ----------Extraction nozzle Ã: 250 mm, nominal volume flow: 3,534 m³/h, max. volume flow: 4,900 m³/h, max. vacuum: 3,184 Pa, filter area: 22.4 m², chip collection volume: 2 x 250 litres, number of bags: 2 pieces, motor 400 V: 7.5 kW, dimensions (LxWxH): 2,351 x 1,058 x 2,361 mm, sound pressure level: 71 dB(A), weight: 758 kg, after: GS - HO - 07- new exhibition machine -

Mobile Genset 1250Kva Commercial PIC: yytan@topglove.com.my Technical PIC: Findyrul: m_findyrultopglove.com.my

Manufacturer: FINN Model: POWER LP6 Year of Manufacture: 2007 Working hours: 21,500 available : immediately Find more here - / Contact us at -

Manufacturer: FINN POWER Model: LPe5 Year of Manufacture: 2002 Work area: 2500×1250 mm (+ repositioning) AVAILABLE: immediately Find more here - / Contact us at -

Manufacturer: Prima Power Model: Combo Type of Machine : Laser cutting machine Find more here - / Contact us at -

longitudinal feed: X: 490 mm Vertical feed: Y: 320 mm cross travel: Z: 660 mm Swivel range: C: +/- 200 ° Control: HMC 500 WWM Walter lenght tool piece capture: A: 175 mm ISO 50 Max. rpm: A: 60 min/-1 centre height: 145 (190) mm max. workpiecediameter: 320 mm max. workpiece length: 320 (350) mm resolution: 0,0001 ° Resolution: 0,0001 mm Grinding spindle:: spindle diameter: 80 mm grinding wheel diameter: max. 200 mm Max. rpm: 0 - 7.000 min/-1 driving power - grinding spindle: 24 kW max. Torque: 6 Nm total power requirement: 35 kVA weight of the machine ca.: 4,65 t dimensions of the machine ca.: 3,6 x 2,5 x 2,95 m Documents: pallet loading station: CNC - Tool-Grinding-Machine WALTER - Helitronic Power Production The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 60.0 t chamfer lenght: 1270 mm distance between columns: 1000 mm column arm: 410 mm ram stroke speed: 160 mm/sec work speed: 10.0 mm/sec return speed: 165 mm/sec work stroke: 275 mm dayligth: 530 mm table height: 900 mm table width: 90.0 mm back stop - adjustable: max. 800 mm oil volume: 150 ltr. voltage: 400 V engine output: 7.5 kW Weight: 4320 kg range L-W-H: 2250 x 1960 x 2750 mm Demonstration/demo machine () From our showroom (like new) With very few operating hours -------------------------------------------------- CNC press brake with special equipment Version ERGO - knee room for the operator flexible articulated arm mount for the controller increased installation height increased cylinder stroke as well as increased bending beam speeds -------------------------------------------------- Furnishing: - DELEM CNC control model DA-66T graphic/touch screen 2D graphi ...

pressure: 175 t chamfer lenght: 4100 mm distance between columns: 3600 mm column arm: 410 mm ram stroke speed: 180 mm/sec return speed: 135 mm/sec work speed: 10,0 mm/sec work stroke: 275 mm dayligth: 550 mm table height: 900 mm table width: 90,0 mm oil volume: 200 ltr. voltage: 400 Volt total power requirement: 15,0 kW weight: 11.950 kg range L-W-H: 5100 x 2150 x 2850 mm -------------------------------------------------- Press brake with special equipment increased installation height increased cylinder stroke as well as increased bending beam speeds -------------------------------------------------- Furnishing: - DELEM CNC control model DA-58T graphics / touchscreen 2D graphic programming 15 high definition color TFT screen Bending sequence calculation Product programming and display in real size USB interface - Motorized backgauge with R-axis, on recirculating ball spindles - ...

pressure: 100 t chamfer lenght: 2600 mm distance between columns: 2200 mm column arm: 410 mm ram stroke speed: 200 mm/sec work speed: 9.5 mm/sec return speed: 155 mm/sec work stroke: 275 mm dayligth: 530 mm table height: 900 mm table width: 90.0 mm oil volume: 150 ltr. voltage: 400 Volt total power requirement: 7.5 kW weight: 6850 kg range L-W-H: 3750 x 1950 x 2800 mm -------------------------------------------------- Press brake with special equipment increased installation height increased cylinder stroke as well as increased bending beam speeds -------------------------------------------------- Furnishing: - DELEM CNC control model DA 53T (touchscreen) - Motorized backgauge with R-axis, on recirculating ball spindles - X = 800 mm R = 250 mm with 2 stop fingers - controlled axes Y1 - Y2 - X - R - C (crowning) - electr. Crowning controlled by CNC - Upper deer foot tool with PS 135.8 ...

pressure: 220 t chamfer lenght: 3760 mm distance between columns: 3250 mm column arm: 410 mm ram stroke speed: 180 mm/sec work speed: 10.0 mm/sec return speed: 160 mm/sec work stroke: 275 mm dayligth: 550 mm table height: 900 mm table width: 160 mm oil volume: 300 ltr. voltage: 400 Volt total power requirement: 18.5 kW weight: 12906 kg range L-W-H: 5100 x 2250 x 2900 mm -------------------------------------------------- Press brake with special equipment increased installation height increased cylinder stroke as well as increased bending beam speeds -------------------------------------------------- Furnishing: - DELEM CNC control model DA 58T (TouchScreen) - Motorized backgauge with R-axis, on recirculating ball spindles - X = 800 mm R = 250 mm with 2 stop fingers - controlled axes Y1 - Y2 - X - R - C (crowning) - electr. Crowning controlled by CNC - Upper deer foot tool with PS 135 ...

pressure: 40.0 t chamfer lenght: 1270 mm distance between columns: 1050 mm column arm: 350 mm dayligth: 387 mm work stroke: 170 mm table height: 850 mm back stop - adjustable: 800 mm adjustment speed: 230 mm/min ajustment speed: 140 mm/sec working feed: 10.0 mm/sec return speed: 170 mm/sec total power requirement: 5.5 kW weight of the machine ca.: 3220 kg dimensions of the machine ca.: 2150 x 1650 x 2300 mm -------------------------------------------------- Press brake with special equipment increased installation height increased cylinder stroke as well as increased bending beam speeds -------------------------------------------------- Furnishing: - DELEM CNC control model DA 58T (TouchScreen) - Motorized backgauge with R-axis, on recirculating ball spindles - X = 800 mm R = 250 mm with 2 stop fingers - controlled axes Y1 - Y2 - X - R - C (crowning) - electr. Crowning controlled by C ...

pressure: 175 t chamfer lenght: 3100 mm distance between columns: 2600 mm column arm: 410 mm ram stroke speed: 180 mm/sec work speed: 10.0 mm/sec return speed: 135 mm/sec work stroke: 275 mm dayligth: 550 mm table height: 900 mm table width: 90.0 mm oil volume: 200 ltr. voltage: 400 Volt total power requirement: 15.0 kW weight: 9450 kg range L-W-H: 4250 x 2150 x 2800 mm -------------------------------------------------- Press brake with special equipment increased installation height increased cylinder stroke as well as increased bending beam speeds -------------------------------------------------- Furnishing: - DELEM CNC control model DA-58T graphic/touch screen 2D graphical programming 15 TFT color screen with high resolution Bending sequence calculation Product programming and real size display USB interface - Motorized backgauge with R-axis, on ball screws - X = 800 mm R =  ...

pressure: 60.0 t chamfer lenght: 2100 mm distance between columns: 1700 mm column arm: 410 mm ram stroke speed: 160 mm/sec work speed: 10.0 mm/sec return speed: 165 mm/sec work stroke: 275 mm dayligth: 530 mm table height: 900 mm table width: 90.0 mm oil volume: 150 ltr. voltage: 400 Volt total power requirement: 7.5 kW weight: 5640 kg range L-W-H: 3250 x 1960 x 2750 mm -------------------------------------------------- Press brake with special equipment increased installation height increased cylinder stroke as well as increased bending beam speeds -------------------------------------------------- Furnishing: - DELEM CNC control model DA 53T (touchscreen) - Motorized backgauge with R-axis, on recirculating ball spindles - X = 800 mm R = 250 mm with 2 stop fingers - controlled axes Y1 - Y2 - X - R - C (crowning) - electr. Crowning controlled by CNC - Upper deer foot tool with PS 135 ...

pressure: 220 t chamfer lenght: 4100 mm distance between columns: 3600 mm column arm: 410 mm ram stroke speed: 180 mm/sec work speed: 10.0 mm/sec return speed: 160 mm/sec work stroke: 275 mm dayligth: 550 mm table height: 900 mm table width: 160 mm oil volume: 300 ltr. voltage: 400 Volt total power requirement: 18.5 kW weight: 13800 kg range L-W-H: 5150 x 2250 x 3000 mm -------------------------------------------------- Press brake with special equipment increased installation height increased cylinder stroke as well as increased bending beam speeds -------------------------------------------------- Furnishing: - DELEM CNC control model DA-58T graphics / touchscreen 2D graphic programming 15 high definition color TFT screen Bending sequence calculation Product programming and display in real size USB interface - Motorized backgauge with R-axis, on recirculating ball spindles - X ...

The power encoder cable for Tetra Pak systems plays a vital role in the operation and monitoring of various equipment within the Tetra Pak machinery, particularly in processes like filling and packing. Here are some key features and details regarding power encoder cables used in Tetra Pak systems:, Key Features of Power Encoder Cables:, - Function: The power encoder cable connects the encoder to the control system, allowing for the transmission of signals that monitor the position and speed of moving parts in the machinery., - Signal Transmission: These cables are designed to carry data signals related to rotational positioning, helping ensure that machines operate accurately and efficiently., - Durability: Power encoder cables are built to endure the rigorous conditions within Tetra Pak machinery, including exposure to moisture, variable temperatures, and physical wear. They are often m ...

Serial no. 18W3950940, Prime Power 720kW 900kVA, Standby power 800kW 1000kVA, Power factor, pf 0.8, Voltage, V 415, Current, A 1252, Speed, RPM 1500, Weight, kg 11,000, Contact: Ms Sabrina (60177418071)

Siemens SITOP UPS1600 Power Supply Item number: 6EP4137-3AB00-2AY0 Type: SITOP UPS1600 Input: DC 24V/43.4A Output: DC 24V/40A Battery connection: DC 24 V / 3 A Weight: approx. 2.5 kg Condition: used Price without VAT per piece Country of origin: Austria Piece1

Key data: 4 Meter, 13 t

Machine Type: Plasma Inverter Cutting Machine Make Hypertherm Type Powermax 30 AIR Serial No. 033.100 Connection voltage 1 x 230 Volt Adjustment range 15 – 30 amps Duty cycle 20% ED at 30 amps Current adjustment infinitely variable max. cut-off cut for a short time 15 mm at 125 mm/min max. quality cut for a short time 7 mm at 500 mm/min Cooling inverter through built-in fan Cooling burner compressed air cooled Portable assembly system design Fuse 16 Ampere Optional accessories integrated compressor Dimensions L x W x H 420 x 195 x 330 mm Weight with burner 13 kg Age 4 years Condition workshop tested, very good incl. UVV test report Scope of delivery Plasma cutting system with the following accessories: 1 piece AIR T30 hand cutting torch 4.5 mtr. long 1 piece ground cable 1 Piece Instruction Manual Warranty: 18 months from th ...

Key data: 4 Meter, 13 t

Machine Type: Plasma Inverter Cutting Machine Make Hypertherm Type Powermax 30 AIR Serial No. 039.660 Connection voltage 1 x 230 Volt Adjustment range 15 – 30 amps Duty cycle 20% ED at 30 amps Current adjustment infinitely variable max. cut-off cut for a short time 15 mm at 125 mm/min max. quality cut for a short time 7 mm at 500 mm/min Cooling inverter through built-in fan Cooling burner compressed air cooled Portable assembly system design Fuse 16 Ampere Optional accessories integrated compressor Dimensions L x W x H 420 x 195 x 330 mm Weight with burner 13 kg Age 3 years Condition workshop tested, very good incl. UVV test report Scope of delivery Plasma cutting system with the following accessories: 1 piece AIR T30 hand cutting torch 4.5 mtr. long 1 piece ground cable 1 Piece Instruction Manual Warranty 24 months from th ...

Punching force: 300kN, max. operating pressure: 300bar, weight: 13500kg, operating hours: approx. 52300h. Documentation available. An on-site inspection is possible.

A bevel gear rolling test machine Gleason is available. Workpiece diameter: 330mm, max. center distance: 203mm, driver spindle nose distance range: 100mm-250mm, max. offset range upper/lower: 203mm/50mm, driver spindle bore: 99mm, driver spindle taper per meter: 15.5mm/m, counter spindle bore: 58mm, counter spindle taper per meter: 12.7mm/m, spindle speed: 1500rpm, test angle range: 0°-180°, driver spindle repeatability: +/-0.004mm, runout: +/-0.003mm, machine dimensions X/Y: approx. 1550mm/2050mm, weight: approx. 2400kg. An on-site inspection is possible.

CNC Floor Milling Machine for Bed CNC control Heidenhain iTNC 530 Controlled NC table 1600 x 1600 mm Table dimensions 5500 x 2600 mm Travel X-axis 8000 mm Y-axis travel 2100 mm Travel Z-axis 1300 mm Travel W-axis 1000 mm C-axis swivel of the milling head body by 360° A-axis swivel of the milling head by 180° Spindle speed 36 - 6,000 rpm Spindle motor 42 / 30 kW Spindle holder DIN 69871-SK 50 Tools in Tool Magazine 48 If you have any questions about the machine, please do not hesitate to contact us by phone or e-mail. Feel free to check out our other ads for a full overview of our stock.

KIMLA POWERCUT LF1020 fiber laser was built in 2022 in Poland by POLCOM Przemysław Kimla. The machine has worked for a total of 814 hours and is in very good condition. Laser cutting is performed by means of a stable 2 kW fibre beam, which is generated by a resonator of the highest energy efficiency. A focusing lens system inside the cutting head ensures optimum beam geometry for various types of workpieces. As a result, the edges of the machined workpieces are distinguished by their unprecedented smoothness and absence of irregularities. The entire machining process is fully automatic, thanks to the use of an automatic pallet exchange system. This system enables simultaneous loading and unloading of workpieces during cutting, thus increasing production efficiency and reducing machine downtime to a minimum. The POWERCUT LF1020 fibre laser is offered with an extensive range of equi ...

CNC Prima Power Laser Cutting & Welding Machine TYPE: Optimo 2545 Basic: X= 4,500mm, Y= 2,500mm, Z= 1,020mm Length of the shaker (per PC): 4000 mm Width 2250mm/ Duty width: 3000mm Height: < 400 mm Process path (with coupled movement): 10,000 mm Loading capacity: 600 kg/m2 Max Speed: 0.5m/s Max acceleration: 0.5m/s2 Max kickback: