gas power plant used for sale

UV disinfection system mounted on stainless steel frame with pumping station, storage tank and control cabinet.

The chamber in which the product carrier is inserted is available over 2 flaps which are pneumatically controlled. The spray nozzles are tiltable. It is a nozzle with 63 spray nozzles installed.

UV reactor plant mounted inframe with control cabinet.

akvoFloat is a system for wastewater treatment, especially for removing solids and oil from old emulsions and wash water.

Extraction cabinet made of stainless steel equipped with PTFE-Pipes, drip pan and a membrane diaphragm pump. Former use as a storage for dangerous chemicals.

Biogas cogeneration plant of approximately 300 kW electric, installed in a soundproofed metal container. The set incorporates a Weifang Naipute/NPT model 300GFT gas engine, 450 kVA MBH alternator and control panel for the generator set. The installation also includes a gas train, ventilation system, pipes, pumps, heat exchangers, cooling system and vertical air coolant ICO_ND 300. According to the available technical documentation, the air cooler is designed for an air flow of approximately 34,000 m³/h and an installed ventilation power of approximately 37 kW. Technical documentation, operation and maintenance manuals, electrical diagrams, DSE controller documentation, Modbus communication, certificates and drawings are available. A circulation pump model ISG50-125 and a heat exchanger with an indicated weight of approximately 280 kg are also identified. The unit is offered in its cu ...

Equipped with 3 shelves, First 3 photos purely indicative Auction-ID: A3-50009-187

Equipped with 2 shelves, Complete with cardboard shelves Auction-ID: A3-50009-197

Equipped with 2 shelves, Complete with cardboard shelves Auction-ID: A3-50009-198

Equipped with 5 shelves, First 3 photos purely indicative Auction-ID: A3-50009-243

Equipped with 2 shelves, Complete with cardboard shelves Auction-ID: A3-50009-194

Equipped with 3 shelves, First 3 photos purely indicative Auction-ID: A3-50009-192

Equipped with 2 shelves, Complete with cardboard shelves Auction-ID: A3-50009-193

Equipped with 3 shelves, First 3 photos purely indicative Auction-ID: A3-50009-191

Equipped with 3 shelves, First 3 photos purely indicative Auction-ID: A3-50009-188

Equipped with 3 shelves, Complete with cardboard inserts, Issue according to instructions Auction-ID: A3-50009-199

Equipped with 2 shelves, Complete with cardboard shelves Auction-ID: A3-50009-195

Equipped with 3 shelves, First 3 photos purely indicative Auction-ID: A3-50009-189

Equipped with 5 shelves, without any substance. First 3 photos purely indicative, Release. According to indication Auction-ID: A3-50009-320

Equipped with 2 shelves, Complete with cardboard shelves Auction-ID: A3-50009-196

Equipped with 3 shelves, First 3 photos purely indicative Auction-ID: A3-50009-190

Mobile containerised steam boiler plant 2.000 kg/h • Configuration: mobile containerised steam boiler plant with auxiliary systems for independent operation, designed for relocation between sites. • Inspection certificate: the pressure equipment has an inspection certificate issued by accredited pressure equipment inspection body. The certificate covers the equipment and scope of inspection identified in the certificate. • Steam boiler: I.VAR Industry BHP-EN 2000, type PFV1422000, high-pressure, monobloc design. • Performance: steam production 2,000 kg/h, rated boiler output 1,385 kW. • Pressure: 6–10 bar; maximum working pressure of the boiler 12 bar. • Fuel: LPG – propane–butane. • Burner: Baltur TBG 200 LX ME modulating low-NOx gas burner, output range 475–2,000 kW, with Lamtec BT320 electronic controls and LCM100 load controller. • Gas train: DUNGS R2 ...

General Description Heavy-duty conventional engine lathe of likely Soviet/Eastern European manufacture, designed for turning, facing, boring and threading large cylindrical workpieces. The machine is equipped with a geared headstock, large independent chuck, heavy-duty carriage and manual controls suitable for general machining applications. Technical Details Manufacturer: Not identified Model: Not identified Machine type: Heavy-duty conventional engine lathe Year: Not confirmed Power supply: 380 V, 3-phase, 50 Hz Rated current: 63 A Starting current: 756 A (electrical plate) Large 4-jaw independent chuck (approx. 700–900 mm) 4-way tool post Quick-change gearbox Leadscrew and feed rod Tailstock Electrical control cabinet Condition Used industrial condition. The machine appears mechanically complete with headstock, carriage, tailstock and electrical cabinet install ...

2 identical thermal oil boilers for industrial process heat supply are offered. Equipped with: attached burner system, thermal oil piping connections, circulation/pump components, valves and monitoring devices, insulated piping, stainless steel cladding, integrated viewing/inspection area at the boiler front. Inspection possible by appointment.

Qty. 1 Second-hand paper production plant – PM5 Mfc.: PAMA line with Voith and Valmet systems Built: 1985 Stopped: 1/2026 Modernised: 1994–2025 Trimmed width: 2,640 mm Speed: 600 m/min Gross capacity: 150 t/day Basis weight: 45 – 130 g/m² Working width: 2,730 mm Paper grades: Office, copy, writing, printing, envelope and newsprint Installed electrical power: approx. 2.5 MW Steam consumption: up to approx. 16 t/h 01 Approach flow system Mfc.: PAMA 02 Headbox Mfc.: Voith 03 Fourdrinier section Mfc.: PAMA 04 Top-wire former Mfc.: Valmet 05 Press section 06 Dryer sections Mfc.: PAMA 07 SpeedFlow system Mfc.: Voith 08 After-dryer section Mfc.: PAMA 09 Calender 10 Pope reel Mfc.: PAMA Modernisations Valmet top-wire former installed / retrofitted in 1994 Approach-flow system expanded and modernised in 2002–03 MAP quality-control system installed / ...

Used Auction-ID: A1-50849-606

Used Auction-ID: A1-50849-579

Motor: 5.5 kW Speed: 2980 rpm Input diameter: 25 cm Output dimensions: 30 x 20 cm With mounting bracket With control box

Gravel plant WIMA 130...150 t/h  Year of manufacture 1992 and younger Throughput in normal operation 130...150 t/h Output fractions fine sand 0/1 + 0/2 + 2/8 + 8/16 + 16/32 Task from the land belt (not included !) Pre-screening WIMA FKP-1250-2-N 0/32 + 32/90 + 90/x Oversize Crusher Plant Impact Mill Hazemag AP-KH1005 with Feed Hopper & Belt 1. Screening machine WIMA flat screen 2000/6000/2 for separation 0/2 + 2/32 Thickener + Sand Pump + Dewatering Screening Machine Bucket wheel WIMA SR-30-09-100-S 2. WIMA Flat Screen 2000/6000/2 for Fractionation 2/8 + 8/16 + 16/32 Twin shaft blade wash WIMA DWSW150/2150/6000/2 (bypassable) Various conveyor and stockpile belts more operational condition  available from the end of 2026 ... beginning of 2027 in use until then Sale against bid from location D - BL Saxony-Anhalt Code No. Q64

The painting line is designed for varnishing elements made of MDF or HDF board. Spray booths have two circuits: one for clear coat and the other for color paint. The line is designed for water-based UV varnishes. The line consists of the following elements: - feeding table with an automatic robot from the Italian company NEOMEC - transport table with a cleaner - shower cabin from the Italian company GIARDINI DUALTECH 416 r.2017 - drying tunnel with IR lamps pcs.2 pcs - UV tunnel - roller conveyor - turntable - transport table - transport table with a cleaner - automatic painting machine - drying tunnel with IR lamps pcs.2 pcs - UV tunnel - roller conveyor - receiving table with a robot from the Italian company NEOMEC

Find more here - .ucymachines/

Demonstration system EVT AQUA - L for sale. Year of construction 2020 Equipped with the following options  Goods movement  Spraying device  Surface drainage  2 x heated flood unit  2 x ultrasonic rod transducers 1.5 kW / 25 kHz each  Return sieve  2 x fine filter 25 μm  Hot air drying  Vapour extraction via filter muck  Automatic oil separation Technical data Cleaning medium: Water with cleaning additive Filling volume: 800 dm3 Heating capacity: 30 kW Connected load: 60 kW Compressed air: 6 bar Weight of the system: 3000 kg Throughput: 4 - 6 batches/h 250 kg/h Basket dimensions: 670 x 480 x 320 mm Plant dimensions: 2400 x 2000 x 2450 mm Operating mode: 1-3 shifts Possible Applications: - Water Treatment: - Industrial Water Purification: Designed for treating and recycling water in manufacturing or processing plants. - Wastewater Ma ...

15013297 - without coupling material - Auction-ID: A7-51315-880

Defective, 20017536 Auction-ID: A7-51315-916

1994 Niemeyer RWE 13 – SF 7/002 D Shaft manufacturing plant Find more here - .ucymachines/ Contact us at - sales@ucymachines

A used Esback Köhler Fettbaker is currently for sale and immediately available in our warehouse in Bielefeld. Fat Baker Esback Charcoal Burner - Fat baker with proofer - 380 Volt 50Hz - Grease trays inner dimensions: 89x73cm

15013544 Auction-ID: A7-51315-965

Bread line baking technology built in 2021 consisting of dough divider, ribbon rounder, intermediate bread proofer and bread long moulder is currently for sale. Bread plant built in 2021 consisting of: - Dough divider bread dough divider machine Soft built in 2021 - Ribbon rounder Rounder built in 2021 - Intermediate bread proofer - Bread long scooter Combi 600 built in 2020

15015903 Auction-ID: A7-51315-929

12018922 - without coupling material - Auction-ID: A7-51315-853

ZENO CMX 300 / NT 65 Mixing plant Type: CMX300 M.No.: 15A-6180Pos.25 Motor: 2x 30KW/55A Year of construction: approx. 2014 Weight: approx. 6000kg Dimensions: with access = L 5450 mm x W 3700 mm x H 1800 mm without access = L 3950 mm x W 1700 mm x H 1800 mm Conveyor belt: Type: NT 65 M.No.: 15A-6180Pos.24 Motor: 11KW/21A Year of construction: approx. 2014 Weight: approx. 5000kg Dimensions: with access = L 13000 mm x W 3300 mm x H 1500 mm without access = L 13000 mm x W 1300 mm x H 1500 mm Dl777x Mixer & conveyor belt are one component. Find more here - .ucymachines/ Contact us at - sales@ucymachines

Good day We offer you a used OCC sorting system consisting of a paper spike, type 2000, from the manufacturer Grumbach und Petermann GmbH, with a paper take-off belt, Bollegraaf type HBGT 1200 x 4760 15° and a single-deck star screen, fine, manufacturer Lubo Screening & Recycling Systems B.V. The machines were dismantled down to the base frame, derusted, primed and finally painted. Defective shafts and rubber stars, the V-belts and spikes of the PaperSpike as well as pneumatic cylinders were replaced. All bearings and drive chains were replaced, and the engines and transmissions were checked. A viewing is possible by appointment. We assume no liability for the technical information or any errors. We would be happy if this machine is interesting for you. Your service team Mertens & Frowein GmbH

Eberhardt Universal Round and long mould Year of construction 2003 Siemens Simatic control system Height: 150cm Width: 80cm Depth: 100cm

13009296 - without coupling material - Auction-ID: A7-51315-851

Double Diaphragm Piston Pump