gas power plant used for sale

Key data: 3240 KW, 3294 kVA, 10500 V

Electricity and heat generator from 1998 with 61,000 operating hours, BSService at 50,000, then another 10,000 operating hours, complete (still installed). 1 available 2,635 kWel x 1,000 rpm, 10,500 V/ 50 Hz. AC generator: ABB AMG 630 L6, 3,294 kVA CHP Wärtsilä W16V25SG Manafacture: Wärtsilä Model: W16V25SG Type: Gas-fired CHP Serial Number: 4008 Mechanical power [kW]: 3.140 Thermal power [kW]: 4.272 Power fired [kW]: 8.134 Exhaust gas temperature [°C] 420 AC generator ABB AMG 630 L6 Manafacture: ABB Model: AMG 630 L6 Type: AC Synchronous Generator Serial Number: 106824 Power [kVA]: 3300 Voltage [V]: 10.500 Frequency [Hz]: 50 Current [A]: 181 Speed [1/min]: 1,000 Year of construction: 1998 Weight [kg]: 10.970

Machine type MIG/MAG welding system Make MERKLE Type RedMIG 2000 K Connection voltage 3 x 400 volts Adjustment range 25 - 200 amperes Switch-on time 30% ED at 200 amperes 60% ED at 140 amperes Current setting 7 switching stages Cooling transformer due to built-in fan Cooling burner gas-cooled Version of mobile compact system Wire feed 2-roll drive Fuse 16 Ampere Dimensions L x W x H 800 x 460 x 655 mm Weight 70 kg Age 12 months Condition workshop-tested, as new, incl. UVV test protocol Scope of delivery Welding system with the following accessories: 1 piece welding torch, 3 mtr. Long 1 piece ground cable 4 mtr. Long 1 piece pressure reducer Argon with 2 pressure gauges 1 roll welding wire D-300 coil, 5 kg 1 can of non-stick spray 1 piece hand shield 1 piece of protective glass 10 DIN 1 piece of white glass 1 piece spare part box ...

MWM TCG 2020 V 16 Remanufactured Motor / Short Block It is a refurbished short block. Repaired in accordance with the manufacturer's guidelines and the RAL seal of approval. Circumference: - Crankcase incl. new bearing - Crankshaft (Std-dimension) incl. new bearings - Camshafts incl. new bearings - Wheel drive incl. wheel box cover - Flywheel housing - Oil pump with oil suction pipe -Sump - Valve plunger - Oil pressure valve On request, the scope can be expanded (e.g. pistons, liners, cylinder heads, oil coolers, etc.) Further information on the scope and design can be found on our homepage: buecker-essing Removal and installation as well as service for the engine and CHP unit are optionally possible. Please contact us for a written offer. We also have other remanufactured engines, as well as AT cylinder heads, turbochargers, spare parts and other ...

Engine Make Jenbacher Engine Type JGS 620 GS Power KW/RPM 3044/1500 Fuel Natural gas Generator Voltage 10500 V Hz 50 Year of Manufacturing 2011 Running Hours 42666 30k service done at 32.000 hours GAS POWER HOLLAND 00316 38 63 90 71 whatsapp

Intelligent Gas Flow Meter, 5860S/BC1GA0BA1B1, Brooks Instrument, new We have set the lowest price for the new part on the market. We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece there is still a great discount. As good as new in original packaging! The part was bought from a spare parts warehouse of a company and has never been in operation, is completely as good as new and in its original packaging. - High-quality mass flow meter for gas - Max. 300 bar Functional guarantee! We cannot provide a conventional warranty and warranty for second-hand parts. Since we know that the device works, we give you a functional guarantee when you purchase it. If the device does not work within 6 months of purchase, you can return the goods and we will refund the purchase price.

MWM TCG 2020 V 20 Remanufactured Motor / Short Block It is a refurbished short block. Repaired in accordance with the manufacturer's guidelines and the RAL seal of approval. Circumference: - Crankcase incl. new bearings - Crankshaft (Std-dimension) incl. new bearings - Camshafts incl. new bearings - Wheel drive incl. wheel box cover - Flywheel housing - Oil pump with oil suction pipe -Sump - Valve tappets - Oil pressure valve On request, the scope can be expanded (e.g. pistons, liners, cylinder heads, oil coolers, etc.) Further information on the scope and design can be found on our homepage: buecker-essing Removal and installation as well as service for the engine and CHP unit are optionally possible. Please contact us for a written offer. We also have other remanufactured engines, as well as AT cylinder heads, turbochargers, spare parts and othe ...

Key data: 588

2 x Jenbacher 320 Wood gas / Syngas. We have for sale a complete generating station for syngas, including gas line, circuit breaker, control panel and radiator. Two low-hour wood gas / syngas generators in great condition. These generators were only run on natural gas. They are currently set for wood gas / syngas. All wiring between control panel and alternator has been marked up. Available for immediate delivery. For use on gas from pyrolysis plants, gasification plants, woodgas and synthesis gas. Capacity: these generator sets are rated at 588kW for syngas. If they are run on other gases they could produce 720kW. Make and Model: Jenbacher 320 Fuel: Wood gas / Syngas Year: 2008 Hours: 3,000 Capacity: 588 / 720 kW V: 400 HZ: 50 Scope of supply: Engine, alternatzr, frame, control panel, switch panels, gas line, radiators, wiring and other accessories. Price ...

Complete MTU E3042Z6 Combined Heat and Power Natural Gas Generating Set CHP With Acoustic Canopy. Ready to run, turnkey low-hour CHP generating set with acoustic canopy. New exchange block was installed 10,000 hours ago (total hours for set 30,000). Engine is in great condition and available for immediate delivery. Make and Model: MTU E3042Z6 Hours: 10,000 Year: 2017 Capacity: Electric Power 390 kW Thermal Power 490 kW Heating water inlet / outlet 70 / 90 C Fuel: Natural Gas Voltage: 400 HZ: 50 Scope of supply : Engine, Alternator (Leroy Somer), Base Frame, Control Panel, Gas line, Piping, Pumps, Exhaust, Intercooler, Cabling from control panel to alternator, Acoustic Canopy, Documentation.

Machine type MIG/MAG inverter welding system without BiPower Make Merkle Type MobiMIG 280 K Plant No. 123.035 Connection voltage 3 x 400 volts Adjustment range 25 - 280 amperes Switch-on time 35% ED at 280 amperes 60% ED at 240 amperes Current adjustment infinitely variable Cooling inverter by built-in fan Cooling burner gas-cooled Version of portable assembly line Wire feed gearbox 4-wheel transmission DV 26 Fuse 16 Ampere Dimensions L x W x H 470 x 255 x 545 mm Special accessories ColdMIG welding process, e-welding MIG soldering, filler wire welding Weight 27 kg Age 2 years Condition workshop-tested, very good, incl. UVV workshop test protocol Scope of delivery Welding system with the following accessories: 1 piece welding torch SBT 307 G, 3 mtr. Long 1 piece ground cable 4 mtr. long, 35 sqmm 1 piece pressure reducer Argon w ...

Key data: 626

Pro2 container unit with 626kW el. Performance for power generation - 40 ft normal container (L x W x H in metres) 12.2 x 2.55 x 2.55 metres with lighting - MWM genset TBG 616V16K - 626kW for landfill gas, biogas or natural gas with gas control system and control cabinets for plant control, auxiliary drive supply and GCB - Current Bh number only exactly 90.000 - Soundproofed design as a plant container - Separation of containers into engine room / electrical room with connecting door - Access door to the engine room on the longitudinal side and electrical room on the front side - Gas detector and smoke detector - Supply and exhaust air system with backdrop silencer and supply air filtration - Engine cooling water circuit with circulation pump, warm-up control via 3-way mixer - Emergency cooling for HT circuit integrated into the engine cooling water circuit, designed for the c ...

Key data: 220 °C, 2000 mm

PULVERBESCHICHTUNGSOFEN Verwendungszweck : Pulverbeschichtung Maximale Temperatur : 220ºC NUTZBARE INNENABMESSUNGEN Länge : 2.500mm Breite : 1.200mm Höhe : 1.800mm Material der Außenfläche : 1mm Kohlenstoffstahlblech, außen pulverbeschichtet Material der Innenfläche : 1mm verzinktes Stahlblech, nicht beschichtet Dicke der Isolierung : 150 mm Isolierung : Boden - 50 mm Steinwolle (50 kg/m³) Seiten- und Deckplatten - 150 mm Steinwolle (50 kg/m³) Wärmeübertragung : Konvektion, durch geschlossenen Luftkreislauf Heizungsart : Indirekte Heizung mit Wärmetauscher Temperaturregelung : Ein/Aus, 0-400ºC Digitaler Thermostat, Fe-Const (J-Typ) Thermokupplung Umgebungstemperatur : +10ºC (während des Betriebs) Gleichmäßigkeit des Ofens: ±2,5ºC (5ºC insgesamt) Regelgenauigkeit: ±1ºC Aufheizzeit : 25-30 min (leerer Ofen) Energiebedarf des Ofens : 30.000 kc ...

Gas Engine Generator Set (CHP/BHKW) MAN for natural gas Model E2866E 95 kWe Spec number 524806 Serial number 27093890484901 Stamford generator UC1274E2 400V/50Hz, 140 KVa 202 Amp year 2000 Serial number 0117910/02 Scope of delivery: - Generator set - Control panel

Machine type MIG/MAG inverter welding system without BiPower Make Merkle Type MobiMIG 280 K Connection voltage 3 x 400 volts Adjustment range 25 - 280 amperes Switch-on time 35% ED at 280 amperes 60% ED at 240 amperes Current adjustment infinitely variable Cooling inverter by built-in fan Cooling burner gas-cooled Version of portable assembly line Wire feed gearbox 4-wheel transmission DV 26 Fuse 16 Ampere Dimensions L x W x H 470 x 255 x 545 mm Special accessories ColdMIG welding process, e-welding MIG soldering, filler wire welding Weight 27 kg Age 12 months Condition workshop-tested, very good, incl. UVV workshop test protocol Scope of delivery Welding system with the following accessories: 1 piece welding torch SBT 307 G, 3 mtr. Long 1 piece ground cable 4 mtr. long, 35 sqmm 1 piece pressure reducer Argon with 2 pressure gau ...

Gas Engine Generator Set (CHP/BHKW) Waukesha for natural gas Model H24GLD 330kWe Serial number 80371/01 Stamford generator HC1534C2 400V/50Hz, 500 KVa 721 Amp year 2005 Serial number C145320 Scope of delivery: - Generator set - Control panel - Gasline section as displayed - Exhaust gas cooler as displayed

Machine type MIG/MAG inverter welding system Make Merkle Type MobiMIG 180 K Connection voltage 1 x 230 volts Adjustment range 25 - 180 amperes Switch-on time 20% ED at 180 amperes 60% ED at 110 amperes Current adjustment infinitely variable Cooling inverter by built-in fan Cooling burner gas-cooled Version of portable assembly line Wire feed gearbox 2-wheel transmission Fuse 16 Ampere Dimensions L x W x H 450 x 210 x 480 mm Special accessories ColdMIG welding process E-welding, MIG soldering Filling wire welding Weight 17 kg Age 12 months Condition workshop-tested, as new, incl. UVV test protocol Scope of delivery Welding system with the following accessories: 1 piece welding torch SBT 157 G, 3 mtr. Long 1 piece ground cable 1 piece pressure reducer Argon with 2 pressure gauges 1 roll welding wire D-200 coil, 5 kg 1 can  ...

Gas Engine Generator Set (CHP/BHKW) Waukesha for natural gas Model H24GLD Serial number 60468/01 Stamford generator HC1534E2 400V/50Hz, 600 KVa 866 Amp year 1996 Serial number C72199/04 Scope of delivery: - Generator set - Control panel - Gasline section as displayed - Exhaust gas cooler as displayed

Machine type MIG/MAG inverter welding system with bi-power setup Make Merkle Type MobiMIG 280 K - BiPower Connection voltage 230/400 volts Adjustment range 25 - 280 amperes Switch-on time 35% ED at 280 amperes 60% ED at 240 amperes Current adjustment infinitely variable Cooling inverter by built-in fan Cooling burner gas-cooled Version of portable assembly line Wire feed gearbox 4-wheel transmission DV 26 Fuse 16 Ampere Dimensions L x W x H 470 x 255 x 545 mm Special accessories ColdMIG welding process, e-welding MIG soldering, filler wire welding Bi-Power Setup Weight 27 kg Age 12 months Condition workshop-tested, as new, incl. UVV workshop test protocol Scope of delivery Welding system with the following accessories 1 piece welding torch SBT 307 G, 3 mtr. Long 1 piece ground cable 4 mtr. long, 35 sqmm 1 piece pressure reduc ...

Gas Engine Generator Set (CHP/BHKW) Waukesha for natural gas Model F18GL Spec number G 48573 Serial number 399762 Stamford generator HC4346 380V/50Hz, 300 KVa 455 Amp Serial number 8062 Scope of delivery: - Generator set - Control panel - Gasline section as displayed - Exhaust gas cooler as displayed

Gas Engine Generator Set (CHP/BHKW) Waukesha for natural gas Model H24GL Spec number 80012 Serial number 401853 Scope of delivery: - Generator set - Control panel - Gasline section as displayed - Exhaust gas cooler as displayed

- Gas mixing valve MWM 12301147 - Suitable for several motors - Please note! Price per piece! - 12301147 The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new project. By constantly adapting and integrating  ...

Rotary kiln, gas oven, pyrolysis oven, thermolyse furnace used Manufacture: REIDHAMMER Type: DRA 10/150-G-650; DRA 8/100-G-650 Built in 2015 Temperature max 650° C Natural gas Furnace chamber approx. 8 x 2 x 2.2 m Filling volume 1.77; 0.63 m3 Dimensions total approx.: 17 x 2 x 3 m

Machine type MIG/MAG welding system Make Merkle Type CompactMIG 220 K Connection voltage 3 x 400 volts Setting range 25 - 220 amperes Switch-on time 40% ED at 220 amperes 60% ED at 170 amperes Current setting 7 switching stages Cooling transformer due to built-in fan Cooling burner gas-cooled Version of mobile compact system Wire feed 4-wheel gearbox DV 26 Fuse 16 Ampere Dimensions L x W x H 870 x 480 x 740 mm Weight 90 kg Special Accessories Display Automatic wire Age 12 months Condition workshop-tested, as new, incl. UVV workshop test protocol Scope of delivery Welding system with the following accessories: 1 piece welding torch SB 157 G, 3 mtr. Long 1 piece ground cable 4 mtr. long, 35 sqmm 1 piece pressure reducer Argon with 2 pressure gauges 1 roll welding wire D-300 coil, 5 kg 1 can of non-stick spray 1 piece hand shield  ...

Machine type MIG/MAG welding system Make CEBORA Type MIG STAR 550 S Plant No. 991502 Connection voltage 3 x 400 volts Setting range 40 - 500 amperes Switch-on time 60% ED at 500 amperes 100% ED at 390 amperes Current setting 32 switching stages Cooling transformer due to built-in fan Cooling burner water-cooled Execution of mobile industrial plant with separate DV-case Wire feed gearbox 4-wheel drive Fuse 32 Ampere Dimensions L x W x H 1,000 x 500 x 1,250 mm Weight 190 kg Age approx. 25 years Condition workshop-tested, good, incl. UVV test protocol Special accessories 3 x throttle pick-ups Scope of delivery Welding system with the following accessories: 1 piece welding torch 3 mtr. Long 1 piece ground cable 1 piece pressure reducer Argon with 2 pressure gauges 1 piece spare part box kpl. Equipped 1 piece user manual Warr ...

- Mixing pipe mixture line MWM 12301281 - References: 12300476 ; 12300650 - Suitable for several motors - Please note! Price per piece! - 12301281 The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new proje ...

Machine type MIG/MAG welding system Make MERKLE Type CompactMIG 400 DW Connection voltage 3 x 400 volts Adjustment range 25 - 400 amperes Switch-on time 35% ED at 400 amperes 60% ED at 310 amperes 100% ED at 230 amperes Current setting 14 switching stages Cooling transformer due to built-in fan Cooling burner water-cooled Execution of mobile industrial plant with separate DV-case Wire feed 4-wheel gearbox DV 26 Fuse 16 Ampere Dimensions L x W x H 940 x 445 x 1,040 mm Weight 170 kg Special accessories display, automatic wire, VB cable 1.6 mtr. Age 12 months Condition workshop-tested, as new, incl. UVV workshop test protocol Scope of delivery Welding system with the following accessories: 1 piece welding torch SB 504 W, 3 mtr. long 1 piece ground cable 4 mtr. long, 70 sqmm 1 piece pressure reducer Argon with 2 pressure gauges 1 ...

Machine type MIG/MAG welding system Make MERKLE Type CompactMIG 400 K Connection voltage 3 x 400 volts Adjustment range 25 - 400 amperes Switch-on time 35% ED at 400 amperes 60% ED at 310 amperes 100% ED at 230 amperes Current setting 14 switching stages Cooling transformer due to built-in fan Cooling burner gas-cooled Execution of mobile industrial plant Wire feed 4-wheel gearbox DV 26 Fuse 16 Ampere Dimensions L x W x H 940 x 480 x 760 mm Weight 140 kg Special accessories display, automatic wire Age 12 months Condition workshop-tested, as new, incl. UVV workshop test protocol Scope of delivery Welding system with the following accessories: 1 piece welding torch SB 307 G, 3 mtr. long 1 piece ground cable 4 mtr. long, 70 sqmm 1 piece pressure reducer Argon with 2 pressure gauges 1 roll welding wire D-300 coil, 5 kg 1 can of non ...

Machine type Electrode inverter welding rectiveror Make Merkle Type LiteARC 180 Connection voltage 1 x 230 volts Adjustment range 20 - 170 amperes Switch-on time 25% ED at 170 amperes 60% ED at 130 amperes 100% ED at 115 amperes Current adjustment infinitely variable max. weldable material thickness 4 mm Cooling inverter by built-in fan Version of portable assembly line Fuse 16 Ampere Dimensions L x W x H 360 x 140 x 230 mm Weight 5 kg Age 12 months Condition workshop-tested, very good, as new incl. UVV test protocol Scope of delivery Welding system with the following accessories: 1 piece ground cable 1 piece electrode cable 1 piece hand shield 1 piece of lens 90 x 110 mm, white 1 piece protective glass 90 x 110 mm, 10 DIN 1 piece slag hammer, heavy version 1 piece steel wire brush, 2-row 1 piece mains plug 230 V, ful ...

Machine type Electrode inverter welding rectiveror Make Merkle Type LiteARC 160 Connection voltage 1 x 230 volts Adjustment range 15 - 160 amperes Switch-on time 25% ED at 150 amperes 60% ED at 90 amperes 100% ED at 80 amperes Current adjustment infinitely variable max. weldable material thickness 4 mm Cooling inverter by built-in fan Version of portable assembly line Fuse 16 Ampere Dimensions L x W x H 360 x 150 x 240 mm Weight 6 kg Age 12 months Special accessories Carrying strap Condition workshop-tested, as new, incl. UVV test protocol Scope of delivery Welding system with the following accessories: 1 piece ground cable 1 piece electrode cable 1 piece hand shield 1 piece of lens 90 x 110 mm, white 1 piece protective glass 90 x 110 mm, 10 DIN 1 piece slag hammer, heavy version 1 piece steel wire brush, 2-row 1  ...

Machine type MIG/MAG welding system Make MERKLE Type OptiMIG 351 DW Connection voltage 3 x 400 volts Setting range 25 - 350 amperes Switch-on time 60% ED at 350 amperes 100% ED at 300 amperes Current setting 28 switching stages Cooling transformer due to built-in fan Cooling burner water-cooled Execution of mobile industrial plant with separate DV-case Wire feed gearbox 4-wheel transmission DV 26 Fuse 32 Ampere Dimensions L x W x H 990 x 510 x 1.135 mm Weight 210 kg Special accessories Volt and Ampere digital display Automatic wire Age 12 months Condition workshop-tested, as new, incl. UVV workshop test protocol Scope of delivery Welding system with the following accessories: 1 piece welding torch 3 mtr. long 1 piece ground cable 4 mtr. long, 70 sqmm 1 piece pressure reducer Argon with 2 pressure gauges 1 piece spare part box k ...

Machine type MIG/MAG welding system Make MERKLE Type OptiMIG 351 KW Connection voltage 3 x 400 volts Setting range 25 - 350 amperes Switch-on time 60% ED at 350 amperes 100% ED at 300 amperes Current setting 28 switching stages Cooling transformer due to built-in fan Cooling burner water-cooled Execution of mobile industrial plant Wire feed gearbox 4-wheel transmission DV 26 Fuse 32 Ampere Dimensions L x W x H 990 x 510 x 845 mm Weight 190 kg Special accessories Volt and Ampere digital display Automatic wire Age 12 months Condition workshop-tested, as new, incl. UVV test protocol Scope of delivery Welding system with the following accessories: 1 piece welding torch SB 504 W, 3 mtr. long 1 piece ground cable 4 mtr. long, 70 sqmm 1 piece pressure reducer Argon with 2 pressure gauges 1 piece spare part box kpl. Equipped 1 piece use ...

Machine type MIG/MAG welding system Make MERKLE Type OptiMIG 451 KW Connection voltage 3 x 400 volts Adjustment range 25 - 450 amperes Switch-on time 40% ED at 450 amperes 60% ED at 420 amperes 100% ED at 340 amperes Current setting 42 switching stages Cooling transformer due to built-in fan Cooling burner water-cooled Execution of mobile industrial plant Wire feed gearbox 4-wheel transmission DV 26 Fuse 32 Ampere Dimensions L x W x H 990 x 510 x 845 mm Weight 200 kg Special accessories Volt and Ampere digital display Automatic wire Age 12 months Condition workshop-tested, as new, incl. UVV workshop test protocol Scope of delivery Welding system with the following accessories: 1 piece welding torch 3 mtr. long 1 piece ground cable 4 mtr. long, 70 sqmm 1 piece pressure reducer Argon with 2 pressure gauges 1 piece spare part box ...

AT-Motor, repaired according to RAL-GZ 797 Complete motor, version biogas Four-stroke petrol gas engine (75 kW) 6 cylinders in series water-cooled engine cooling water-cooled exhaust pipe Old part deposit: 6,000 euros

Bergen Rolls Royce B35:40V20AG complete gas power plant Year of Make 2011 running hours: 16.380 Hours 8415 Kw 11kV 50 Hz at 750 RPM with AVK DIG 167 f/8 alternator 9100 kvA Complete power plant with all auxilaries: Control Air Compressor ,Self Demand Transformer, LT cooling water system, cooling tower, HT cooling water system, cooling tower, cooling fans, Start Air Compressors and Air tank, Natural Gas Regulator Unit, Emergency Diesel Generator 220 kVA, piping systems oil filter and heater exchangers, Neutral Earthing Resistor Unit, Generator Cooling Fans, Steam Boiler: Nooter/Eriksen Capacity: 5.5 T/h, Switchgear Units, engine tools, instruction manual and more... Please contact for more info and complete scope / offer

AT-Motor, repaired according to RAL-GZ 797 Complete motor, version biogas Four-stroke petrol gas engine (110 kW) 6 cylinders in series water-cooled engine cooling water-cooled exhaust pipe Charging: Exhaust gas turbocharger with water-cooled turbine housing Mixture cooler: two-stage mixture cooling with high and low temperature circuit Old part deposit: 6,000 euros

NATURAL GAS THERMAL POWER PLANT CONSISTING OF 3 CUMMINS 1750GQPB GENERATOR SETS (QSV91-G ENGINE) Fully equipped natural gas thermal power plant. 01 CUMMINS manufactured generator set, Gas, model 1750GQPB (E02K251030), comprising Cummins QSV91-G Engine (66300362) and PCS; with 7695 operating hours. 01 CUMMINS manufactured generator set, Gas, model 1750GQPB (E02K251410), comprising Cummins QSV91-G Engine (66300363) and PCS; with 8746 operating hours. 01 CUMMINS manufactured generator set, Gas, model 1750GQPB (E02K251420), comprising Cummins QSV91-G Engine (66300359) and PCS; with 8061 operating hours. Electrical panels and controls for the respective equipment; DMC 300 (paralleling equipment); QTA (Automatic Transfer Switch); Noise attenuators; 02 Water towers, pumps, and associated cooling system pipes; 01 small transformer, switches, and cable trays; Maintenance switches and ...

Machine type MIG/MAG welding system Make OERLIKON Type Citomag 506 W Connection voltage 3 x 400 volts Adjustment range 30 - 500 Ampere Switching time 60 % ED at 500 amps 100% ED at 420 amps Current setting infinitely variable Cooling transformer by built-in fan Cooling burner water-cooled Design of mobile industrial plant with separate DV case Wire feed gearbox gearboxed 4-roll gearbox Protection up to a maximum of 300 A = 32 A over 300 A = 63 A Dimensions L x W x H 1,050 x 630 x 1,050 mm Weight 237 kg Age approx. 20 years Condition workshop tested, good, incl. UVV test report Scope of delivery welding system with the following accessories: 1 piece welding torch, 3 mtr. long 1 piece ground cable 4 mtr. long, 70 sqm 1 piece pressure reducer argon with 2 pressure gauges 1 piece spare parts box kpl. Equipped 1 piece user manual  ...

Mobile compressor for the evacuation of natural gas from pipelines for maintenance and repair to offer. There are only few trucks of this worldwide. This truck is fully operational and used to be operated only by Gas Industryi n the past! For first details please refer to attached file. The truck is located in the north of Germany (between Bremen and Hanover). A visit is possible by appointment. Further details can be provided on request. - The machine has been completly refurbished in 2022 (documentation/ certification available -> see attached picture) - The truck/ machine is fully operational - Reason for replacement was the truck/ car body ( wanted to have a modern truck – nothing to do with compressor) - Current replacement price of compressor: around 4 Million EUR – delivery time around 36-40 months - Optionally we could provide an engineer from Gas Industry for machine  ...

MAN 2876 E312 gas engine It is a refurbished exchange engine. Repaired in accordance with MAN manufacturer guidelines and RAL quality seals. - Four-stroke gasoline gas engine, 150 kW - 6 cylinders in series - Engine cooling: water-cooled - Water-cooled exhaust pipe Installation, installation and service around engine and CHP optionally possible. Old part deposit: 6.000,- EUR Please contact us for a written offer.

Key data: 800 KW, 1000 kVA, 400 V

ENGINE: 12M33D900E310NG FREQUENCY (HZ): 50 VOLTAGE(V): 400V/230V GENERATOR POWER: 1000kVA) / 800(kW) STARTING: ELECTRIC CONTROL SYSTEM: SELF-CONTROL FUEL TYPE: LPG; LNG; Gas COOLING: WATER-COOLED WEIGHT: 7500kg DIMENSIONS L/W/HEIGHT (MM): 550020002100 The engines are new, complete including control, diesel tank, exhaust and batteries. Network monitoring, grid feed-in Soundproofed Immediately ready for use. Control: Deep Sea Electronics (DSE) Alternator: Leroy-Somer Additional: Automatic Transfer Switch (ATS) 63A/100A ABB & Schneider Disconnectors GenCloud Connect with a phone or computer Single-phase valve 50°C-55°C Radiator External Diesel Tank Lubricating Oil Heater Water Heating Dispatch: Worldwide transport including unloading is possible for an extra charge To be able to quote an exact freight price, please send us an inquiry with your details and full a ...

Scania DC 12, complete engine It is a refurbished exchange engine. Repaired according to manufacturer's guidelines and according to RAL quality seals. - with exhaust manifold - with thermostat housing - with oil filler nozzles - Turbocharger as needed Installation, installation and service around engine and CHP optionally possible. Please contact us for a written offer.

Key data: 400 KW, 500 kVA

ENGINE: Man E2842LE232 FREQUENCY (HZ): 50 VOLTAGE(V): 400V/230V GENERATOR POWER: 500(kVA) / 400(kW) STARTING: ELECTRIC CONTROL SYSTEM: SELF-CONTROL FUEL TYPE: BIOGAS COOLING: WATER-COOLED WEIGHT: 6400kg DIMENSIONS L/W/HEIGHT (MM): 550020002100 The engines are new, complete including control, diesel tank, exhaust and batteries. Network monitoring, grid feed-in Soundproofed Immediately ready for use. Control: Deep Sea Electronics (DSE) Alternator: Leroy-Somer Additional: Automatic Transfer Switch (ATS) 63A/100A ABB & Schneider Disconnectors GenCloud Connect with a phone or computer Single-phase valve 50°C-55°C Radiator External Diesel Tank Lubricating Oil Heater Water Heating Dispatch: Worldwide transport including unloading is possible for an extra charge To be able to quote an exact freight price, please send us an inquiry with your details an ...

Scania DC 12, fuselage engine It is a refurbished exchange engine. Repaired according to manufacturer's guidelines and according to RAL quality seals. - without exhaust manifold - without thermostat housing - without oil filler nozzles Installation, installation and service around engine and CHP optionally possible. Please contact us for a written offer.

Key data: 200 KW, 250 kVA

ENGINE: Man E2676LE202 FREQUENCY (HZ): 50 VOLTAGE(V): 400V/230V GENERATOR POWER: 250(kVA) / 200(kW) STARTING: ELECTRIC CONTROL SYSTEM: SELF-CONTROL FUEL TYPE: BIOGAS COOLING: WATER-COOLED WEIGHT: 4400kg DIMENSIONS L/W/HEIGHT (MM): 430013002000 The engines are new, complete including control, diesel tank, exhaust and batteries. Network monitoring, grid feed-in Soundproofed Immediately ready for use. Control: Deep Sea Electronics (DSE) Alternator: Leroy-Somer Additional: Automatic Transfer Switch (ATS) 63A/100A ABB & Schneider Disconnectors GenCloud Connect with a phone or computer Single-phase valve 50°C-55°C Radiator External Diesel Tank Lubricating Oil Heater Water Heating Dispatch: Worldwide transport including unloading is possible for an extra charge To be able to quote an exact freight price, please send us an inquiry with your details an ...

Sell two new (commissioning 01.05.2023) wood gasifier - pyrolysis plants (each 50KW electric and 120KW thermal) with immediate effect for health reasons. The systems are sold as a complete system with entry system, moving floor (Heizomat) and dryer (11KW) 250KW (cooler). At the moment, the systems are not running in continuous operation, as the heating concept could not be implemented for health reasons. The systems run reliably and can be controlled and monitored via a remote monitoring system. In addition to energy, about 1.5 to 2 tons of biochar or biochar are produced per month. If necessary, support can be provided during dismantling and assembly.

MWM TCG 2016 V 12 exchange unit It is a complete, refurbished exchange unit (motor + generator + basic frame). Repaired according to manufacturer's guidelines and according to RAL quality seals. Further information on the scope and execution can be found on our homepage buecker-essing.de Installation, installation and service around engine and CHP optionally possible. Please contact us for a written offer. We also have other replacement engines, as well as AT cylinder heads, turbochargers, spare parts and other components in stock.

Key data: 1622 , 1835 , 400

2012 Caterpillar 3516C Gas Generator Containereed Package These containerised package XL has been bought for the UK project about couple of years ago but the project did not go ahead as planned. It has approx 25,000 hours and another unit with 26,000 hours on the clock. The containers also have CSC approved and testing certificate for shipping. The details are given below:- Technical specification of CAT 3516C Generating set Unit 1: Sr No: XL600164 Ar No: 3787743 Advertised Power 1622 KW Speed: 1500 RPM YOM: 05/2012 Unit 2: Sr no: XL600135 Arr no: 3787743 Advertised Power: 1622 KW Full load Speed: 1500 RPM YOM: 04/2012 Please see attached the pictures for the units available for sale. Kindly advise your interest if you would like to get further details feel free to contact us back. For arranging the visit inspection; and pricing information feel free to  ...

Capacity: 3000 kg Production capacity: 1500 kg/h degree: 1200 °c heating capacity: 1700 kcal/KW total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 240 KW, 300 kVA, 400 V

GENERATOR ENGINE: Perkins 1506A-E88TAG5 FREQUENCY (HZ): 50 VOLTAGE(V): 400V/230V GENERATOR POWER: 300(kVA) / 240(kW) ENGINE POWER: 240(kW) CYLINDERS: 6 CONTROL SYSTEM: SELF-CONTROL FUEL TYPE: DIESEL COOLING: WATER-COOLED WEIGHT: 2150kg DIMENSIONS L/W/HEIGHT (MM): 310010001700 The engines are new, complete including control, diesel tank, exhaust and batteries. Network monitoring, grid feed-in Soundproofed Immediately ready for use. Control: Deep Sea Electronics (DSE) Alternator: Leroy-Somer Additional: Automatic Transfer Switch (ATS) 63A/100A ABB & Schneider Disconnectors GenCloud Connect with a phone or computer Single-phase valve 50°C-55°C Radiator External Diesel Tank Lubricating Oil Heater Water Heating Dispatch: Worldwide transport including unloading is possible for an extra charge To be able to quote an exact freight price, please send us an inquiry wi ...

weight max. in kg: 2500 kg stroke: 3200 mm fork length: 1000 mm Drive: Gas Side shift: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: 4,25 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Solar Gas turbine Taurus 65 SOLONOX The turbine and gear box is from 2022 and it only has 2000 running hours. The package is from year 2011. The condition is excellent and is ready to start working, in addition it included Solonox mode and fire extinction module. All the maintenance has been done by Turbomach official service. The equipment is already dismounted on our warehouse and ready to be load. It is available all the systems except the exhaust system that is optional. It is possible to have a visit and a inspection of the turbine. Also is available a boroscope of the turbine. YOM:2022 Power: 6300kWe Fuel: Natural Gas Working Hours: 2300 h Voltage: 6300V