gas mixer used for sale

General SKU266Y410 MakePall TypeDU006-EU No.CCT-MM210178 Main Features MaterialStainless steel Motor0.18 KW Specified Features - Stirrer Motor Recycling > Consumer wasteIndustries > Chemical > Paints & coatingsIndustries > Food & Feed > Powdered foodsIndustries > Pharmaceutical > Generic medicinesIndustries > Pharmaceutical > OintmentsIndustries > Food & Feed > Tea, herbs & coffeeIndustries > Chemical > Fine chemicalsIndustries > Food & Feed > StarchIndustries > Chemical > Other chemicalGreen FridayIndustries > Chemical > RubberIndustries > Chemical > BiotechnologyIndustries > Chemical > AgrochemicalsIndustries > Food & Feed > SpicesIndustries > Chemical > Plastic & polymersIndustries > Chemical > Catalysts & fillersIndustries > Food & Feed > Feed additivesIndustries > Recycling > Paper & otherMixers > StirrersIndustries > Chemical > SolventsIndustries > Chemical > Detergent &  ...

General SKU338Y834 LocationBarneveld MakeMAP Italy Main Features MaterialStainless steel Volume4000 Ltr. Motor63 KW Specified Features - Powder turbo mixer Powder turbo mixercheck Capacity4.000 l Trough sizesDia. 1500x2450 mm Inletdia. 215/320 mm Inspection hatch2x (755 x 625 mm ) Outlet200 x 200 mm Glands air purgedcheck Motor55 kW,(400 V, 1470 rpm) With variable speed drivecheck Speed mixing shaft8,5-57 rpm With lump breaker2x Motor2x (4,0 kW (380 V, 2865 rpm)) MaterialStainless steel 1.4301 (304) General Serial887 TypeWBHX-4000 / OHK Year of construction1997 Mounted on framecheck With switchgearcheck Sizes switchgear0,80 x 0,40 x 1,90 m Floorspace4,40 x 1,90 m Total height2,40 m Weight3500 kgPowdered foodsGeneric medicinesTea, herbs & coffeeFine chemicalsStarchOther chemicalGreen FridayAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additiv ...

General SKU266Y412 MakePall TypeMMG403 Main Features MaterialStainless steel Motor0.18 KW Specified Features - Stirrer Motor± 0,186 kW Stirrers MaterialStainless steel 1.4306 (304L) General Year of construction2021 LocationBarneveld Weight50 kg CEcheck Extra information Speed 20–300 rpm. Motor 1/4 HP (approx. 0.186 kW). Power supply 100–230 V AC, 50/60 Hz. Input power Recycling > Consumer wasteIndustries > Chemical > Paints & coatingsIndustries > Food & Feed > Powdered foodsIndustries > Pharmaceutical > Generic medicinesIndustries > Pharmaceutical > OintmentsIndustries > Food & Feed > Tea, herbs & coffeeIndustries > Chemical > Fine chemicalsIndustries > Food & Feed > StarchIndustries > Chemical > Other chemicalGreen FridayIndustries > Chemical > RubberIndustries > Chemical > BiotechnologyIndustries > Chemical > AgrochemicalsIndustries > Food & Feed > SpicesIndustr ...

General SKU200W001 LocationBarneveld CEcheck MakeHPV TypeDish LPD liquid processing unit Main Features MaterialStainless steel Motor5.5 KW Specified Features - Inline mixer Capacity18,0 t/h of final product MaterialStainless steel 1.4435 (316L) General No.1200-0708/2008 Year of construction2008 Floorspace6,4x2,35 m Total height2,6 m Weight3500 kg Extra information perfume, aroma, mixing skid The LLPD mixing machine is designed for continuous mixing of the final product and its accumulation for subsequent pumping into final packaging. The machine is capable of producing various modifications of the final product (FP) in 10 perfume variants and different color spectra available within the capacity ranges of dye dosing systems. Qualified reblend (RB) can be added to FP during normal production within the dosing capacity range. The LLPD mixing machine consists of: • 2x  ...

General SKU200W007 MakeWaterleau TypeDiam 1210mm-L=3600mm No.2.11.560 Year of construction2013 LocationBarneveld Main Features MaterialStainless steel Motor5.5 KW Specified Features - Miscellaneous mixer Mixercheck MaterialStainless steel 1.4301 (304) General Floor space5,65x2,65 mtr Total height2,20 m Weight6470 kg CEcheck Extra information drum mixer with spraynozzles. -Drum diameter 1210mm. -Lenght 3600mm. - Input and output to belt conveyor. - Input 350x350 mm, output 600x400 mm - R77 Helical gearmotor, speed 1455/104 rpm, 5,5 kW agglomerator Consumer wastePaints & coatingsPowdered foodsGeneric medicinesOintmentsTea, herbs & coffeeFine chemicalsStarchOther chemicalGreen FridayRubberBiotechnologyAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesPaper & otherMiscellaneous mixersSolventsDetergent & surf.Other pharmaceuticsCosmeticsOrganicsE-waste  ...

VERTICAL MIXER 20 m3 capacity, total height approx 7.000 mm including transmission group (can be customized), max Ø 2.400 mm.(standard transport), constructed in painted electro-welded carbon steel., including horizontal feeding screw with hopper, inner auger diam.350 mm., lower loading hopper with safety grid and sampling shutter, complete with anti-dust cover, mm.600x500, pulley and belt transmission, protected by carters, inspection doors with safety limits, cleaning hinged door with safety device, level control window, 250 mm Ø discharging pipe on bottom side for quick discharging, opening on bottom of cone for complete discharging, with safety opening, side discharging pipe to big bag with valve mm.at 2.500 mm from ground, max electric level indicator, paddle type, automatic lubricating kit, electric motor 15 kw, complete with control panel., electric voltage: 400 V, 50 Hz, auxili ...

General SKU014F047 MakeMixaco Maschinenbau Neuenrade TypeCM-2000 D No.22.856 Year of construction1993 LocationBarneveld Main Features MaterialStainless steel Volume1600 Ltr. Motor90 KW Specified Features - Cold mixer Cold mixer:Container mixer: (1x) Capacity1600 Ltr, Useful capacity 800 Ltr Vessel sizesdia. 1500x750mm (brand new :OEM: vessel) With cover(jacketed) Outletdia. 300mm With motor90 KW, 380 Volt MaterialStainless steel 1.4301 (304) General With switchgear(as is) Floorspace3,2x1,8 M Total height3,0 M Weight10.000 KG Extra information -- RECONDITIONED --brand new oem vessel Powdered foodsGeneric medicinesTea, herbs & coffeeReconditionedGreen FridayAgrochemicalsSpicesPlastic & polymersCatalysts & fillersDiscountDetergent & surf.Other pharmaceuticsCosmeticsSugarAnimal feedSolid pharmaceuticsDyes & pigmentsMinerals & inorganicCold mixersMixacoIndustries > F ...

General SKU053E227 MakeMixaco Maschinenbau Neuenrade TypeCM-1000 S No.22800 Year of construction1992 Mounted on framecheck Main Features MaterialStainless steel Volume800 Ltr. Motor37 KW Specified Features - Cold mixer Cold mixer:Container mixer: (1x) Capacitymax. 800 Ltr (useful capacity) Vessel sizesdia. 1450x1000mm (conical vessel) With covercheck Outletdia. 500mm With motor37,0 KW, 380/660 Volt With motor4,0 KW, 220/380 Volt :tilting motor: MaterialStainless steel General LocationBarneveld With switchcheck Floorspace2,9x1,9 M Extra information -- RECONDITIONED --conical vessel Powdered foodsGeneric medicinesTea, herbs & coffeeReconditionedGreen FridayAgrochemicalsSpicesPlastic & polymersCatalysts & fillersDiscountDetergent & surf.Other pharmaceuticsCosmeticsSugarAnimal feedSolid pharmaceuticsDyes & pigmentsMinerals & inorganicCold mixersMixacoIndustries > Fo ...

General SKU086S374 MakeFukae Powtec TypeFS-GC-1200J Mach.No.424 Year of construction1988 Main Features MaterialStainless steel Volume2400 Ltr. Motor55 KW Specified Features - Universal mixer Universal mixer(1x) Capacity2400 Ltr Vessel sizesDia. 1850x1000mm With covercheck Inlet2x dia. 500mm, 1x dia. 160mm Outletdia. 250mm With motor55 KW, 415 Volt With lump breakercheck MaterialStainless steel General LocationBarneveld With switchcheck Floorspace3,9x2,4 M Total height3,2 M Weight9500 KG Extra information - RECONDITIONED -Paints & coatingsPowdered foodsGeneric medicinesReconditionedGreen FridayCatalysts & fillersDiscountDetergent & surf.CosmeticsUniversal mixersFood additivesLubricants & oleoConfectionerySolid pharmaceuticsBeveragesDyes & pigmentsBiopharmaceuticalMinerals & inorganicFukae PowtecIndustries > Chemical > Paints & coatingsIndustries > Food & Feed > ...

General SKU352Y866 LocationBarneveld CEcheck Main Features MaterialStainless steel Volume450 Ltr. Motor37 KW Specified Features - Cold mixer Cold mixercheck Capacity450 l Vessel sizesDia. 900x970 mm With covercheck Manual operated outletcheck OutletDN300 With jacketmixing part With motor22 kW (380 V, 1464 rpm) Rotor speed298 rpm With lump breakercheck With motor15 kW (400 V, 2950 rpm) MaterialStainless steel 1.4301 (304) With jacketcheck General MakeMixaco Maschinenbau SerialSN080067 TypeCM450-LM Year of construction2008 Mounted on framecheck Mounted on stainless st. framecheck With switchgearcheck Floorspace2,80 x 1,40 m Total height3,00 m Weight4000 kg Extra information Equipped with a nozzle for liquid injection, comes with 10 mixing containers and a control cabinet With Siemens touchscreen control, type Simatic panel, Diameter mixing part 885x500 mm ...

Elster SM-RI-X-E G1600 Turbine Wheel Gas Meter Elster Turbine Wheel Gas Meters SM-RI-X-E-G1600-200-98.5-K (170) Qmax: 2500 m³/h Qmin: 130 m³/h pmax: 89.5 bar Item #: 10520813-2014 Pulse generator HF2 162,370 Imp/m³ Regular price: 21.540,-€ net

Complete gas measuring station, gas warning meter, Polytron IR Ex, Dräger, used Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. Used! The part was purchased from a spare parts warehouse of a company, is in very good condition and fully functional. The complete gas measuring device is installed in a Rittal distribution cabinet and consists of: - Rittal distribution cabinet 60 x 30 x 80cm high - Air intake pump, IKS Group, 7006 VD 2,3/E/AC - Gas detector Dräger, Polytron IR Ex, - Brooks variable area flow meter 1355/... - Isolating amplifier Pepperl u Fuchs KFA6-SR2-Ex1.W - Circuit breaker and other accessories The air intake pump sucks in the air from the outdoor area and brings it to the Polytron gas detector Ensuring the function In order to ensure functionality, the buyer must inspect or put the goods into op ...

120651 Hoofdgedeelte van de fakkel NIEUW 2405 GEMAAKT IN DE VS 2 stuks op voorraad, NIEUW

N2 / H2 double station

MicroStep 2x plasma 6000 x 3000 mm Longitudinal travel X-axis: 6500 mm Cross travel Y-axis: 3300 mm Cutting capacity: 60 mm Table dimensions: 6000 x 3000 mm Plasmasource: 2x Kjelberg HiFocus 360 amp

EKU C9F-6GS 6 Burner Natural Gas Stove Hob (gas burner) Number of burners: 6 stand-alone gas burners. Burner configuration: Divided into two performance classes for flexible pot sizes: 3 x small/medium-sized burners: 3.5 kW each (burner head Ø approx. 80 mm) 3 x large power burners: 6.0 kW each (burner head Ø approx. 110/120 mm) Total power hob: 28.5 kW gas output. Equipment: Cast-iron pot supports (slide shelf) and thermoelectric ignition fuse on each flame for maximum operational safety. Oven (undercounter)Type: Gas-powered large-capacity oven (statically heated) with piezoelectric ignition. Oven power: approx. 8.0 kW to 9.0 kW burner power. Inner dimensions: Suitable for Gastronorm grates and trays (GN 2/1). Temperature range: Adjustable from 100 °C to 300 °C via a safety gas thermostat. Connected loads Total connected load (gas): approx. 36.5 kW to 37.5 kW (sum  ...

Used gas fireplace with integrated, ring-shaped gas burner and black housing. Equipment and features: Gas Powered Fire Pit Ring-shaped gas burner Gas connection with hose and pressure regulator Rotary control for flame control (low / high) Piezo ignition with push button Black, box-shaped housing Auction-ID: A1-51154-3

- Toyota Forklift / Forklift - Propulsion: Gas / LPG - Engine: Toyota 4P gas engine - Engine number: 4P0004697 - Serial number: 11045 - Operating weight: approx. 2.6 t - Equipped with Kaup lifting device - Lift mast with hydraulic lifting function - Fork carriage with two forks - Pneumatic tyres - Overhead guard - Driver's seat with seat belt - Lighting and exterior mirrors available - Manual control levers for travel and hydraulic functions - Rear-mounted gas cylinder - Classic Toyota instrumentation - Paintwork: Red - Visible signs of wear due to age and service life - Paint chips, scratches and corrosion build-up, especially on the lift mast, forks and bodywork - Forks with clear superficial traces of rust and wear - Engine compartment and aggregates with age-appropriate soiling - Tires optically used - Seat and controls with signs of wear - Year of construction and ...

Belt spiral mixer for powder and granules with hydraulic mast - 950mm diameter - Pneumatic outlet flap - approx. 120 litres filling volume - made of stainless steel - Drive power: 2.2 kW - 52 shaft revolutions per minute - Adjustable shaft speed - With hydraulic mast (0.55 kW)

type RMG 980 200/100 Recon Part number: 1214 0250 Please note: We have various other RECON parts from different manufacturers and types available. We like to send you our current store reserves.

RECON Part number: 1214 1745 Please note: we also have other various RECON parts of different manufaturers / types in stock. We are pleased to provide you with our current stock list. ---------------------------------------------------------------------- ----------- If you have any further questions do not hesitate to contact us

- Gas mixing valve MWM 12301147 - Suitable for several motors - Please note! Price per piece! - 12301147 The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new project. By constantly adapting and integrating  ...

- Mixing pipe mixture line MWM 12301281 - References: 12300476 ; 12300650 - Suitable for several motors - Please note! Price per piece! - 12301281 The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new proje ...

Recon Part number: 1230 0571 Attention: We also have various other RECON parts of different manufacturers / types available. We will be happy to send you our current stock list.

Gas mixer from Honeywell for sale, incl. gas test certificate and original packaging.

Recon Part Number: RMG 985B-200/100 Attention: We also have various other RECON parts from different manufacturers / types available. We will be happy to send you our current stock list. ---------------------------------------------------------------------- ----------- Sold only to commercial customers! ---------------------------------------------------------------------- ------------ If you have any further questions, please do not hesitate to contact us!

Recon Part Number: 1227 8128 Attention: We also have various other RECON parts from different manufacturers / types available. We will be happy to send you our current stock list. ---------------------------------------------------------------------- ----------- Sold only to commercial customers! ---------------------------------------------------------------------- ------------ If you have any further questions, please do not hesitate to contact us!

27 litre, Stock number: R1239, Litre: 27, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Planetary mixer, Standing: On a foot, Motor: 1.1 kW - 230 Volt, Inner diameter bowl: D 338 mm, Dimensions: L 545 x W 440 x H 882 mm, Other: With dough hook and whisk

Offer 2pcs gas mixers for sale. One gas mixer is complete, the other lacks the servo motor.

Taema OP25 – Gas Flow Meter / Mixer (O2-N2O) Manufacturer: Taema Model: OP25 Condition: Good, Functional Tested Auction-ID: A1-51275-52

Rühle Tumbler MKR 600, with vacuum, scraping arm, container size 600 liters, LED control, direct cooling by strong cooling unit, mixing and kneading, up to 25 rounds per minute, all stainless steel, with loading device, comfortable emptying of the goods by standard carriage size, refurbished. The machine is currently in the overhaul and can be tested in Koblenz, Germany.

Producer: Suhner Description: - Capacity- 2000l - Brand new microprocesor Mikster MCM 023 - Variable drum speed - Automatic control - Variable pressure level - Pressure measurement; 0-99 % - Manual work mode - 50 programs easy to change - 6 cycles to one program, max cycle time 100h, two phases on cycle - Total time one phase 99 minutes - Brand new inverter Lenze Section responsible for vacuum; - Vacuum pump Busch 36m3 /h - Vacuum valves Danfoss - Total power 5.5 KW ( main motor 4KW + pump 1,5 KW ) - Total weigth 1500 kg - Fully made of stainless steel

MTI P-10 laboratory mixer The laboratory mixer is suitable for mixing, homogenizing, dispersing and suspending of low-to high-viscosity products, heated, pressure and vacuum resistant Heating cooling jacket 5 bar Product space-1 / 0.75 bar Tank 15 l, Volume 11 litres. The machine includes two containers heated, presses a vacuum pump and a dispensing device to high-viscosity products from the mixing container. The documentation is available.

Are you looking for spare parts for your cone mixer? We have the most common spare parts suitable for various brands such as Nautamix, V-Mix, Vrieco mixeretc. in stock, or can produce them quickly and cost-effectively in our workshop. - Mixed screws - Replacement or replacement gearbox - Replacement or replacement of swivel arms - Gears, shafts, seals - Top bearings - Cross joints - Radial bearing - Outlets - Usw. We also have a repair and maintenance service. We would be happy to make you a non-binding offer. E-mail: t.roechter@heiligbv

You are looking for replacement parts for your cone mixer? We have the most common spare parts for various products such as E.g. Nautamix, v mix, Vrieco-mixer etc. in stock, or they can customize quickly and cost-effectively in our workshop. -Mixing augers -Spare or replacement transmission -Spare or replacement swing arms - gears, shafts, seals -Top bearings -Universal joints -Radial storage -Outlets -Etc. In addition, we have a repair and maintenance service. We like to submit a non-binding offer. E-mail: t.roechter@heiligbv

Rühle Tumbler MKR 150, with vacuum, mixing- and scraping arm, container size 150 liters, adjustable Touch-PC control, direct cooling by strong cooling unit, mixing and kneading, up to 50 rounds per minute, all stainless steel, comfortable emptying of the goods by standard carriage size. You are very welcome to test the machine in our facility in Koblenz, Germany.

Vakona ESK 125 Tumbler, vacuum mixing and tumbling machine, the machine comes with tumbling arm and mixing arm, container size 125 liters, MC control, direct cooling by strong cooling unit, mixing and kneading, all stainless steel. You are very welcome to inspect and test the machine in our facility in Koblenz, Germany.

Ruhle MKR 220 high tech tumbler with cooling and vacuum.

Height 2130 Width 1410 mm Length 2130 mm Weight 1500 kg Capacity 1200 l Voltage Electrical: 400V 50Hz 3N Installed Power 9.1 kw Main material Stainlees Steel Load 1000 kg Mixing System Spiral With Paddles Product discharge Pneumatic dampers, front Mixer type Vacuum Mixer Shafts amount Double Shaft

Rühle Miknetum MGR 1500, newest generation of Tumbler, year of construction 2008, with vacuum, mixing arm, container size 1500 liters, filling size 900 Liters, intelligent Touch-PC control, direct cooling by strong cooling unit, mixing and kneading, up to 25 rounds per minute, all stainless steel, feed spindle as loading device, comfortable emptying of the goods by standard carriage size. You are very welcome to see the machine at our facility in 56070 Koblenz, Germany.

Ruhle Miknetum MGR 900, newest generation of Tumbler, with vacuum, mixing arm, container size 900 liters, filling size 675 Liters, intelligent touch-PC control, direct cooling by strong cooling unit, mixing and kneading , up to 25 rounds per minute, all stainless steel, loading device, comfortable emptying of the goods by standard carriage size You are very welcome to test the machine in our facility in Koblenz, Germany.

Wolfking” mixer-grinder Type TSMIG 1250/200 twin shaft paddle mixer mixer capacity 1.250 L. 200 mm – head with tool trolley all stainless steel dimensions mixer (l x w x h) : ± 2.350 x 2.000 x 2.600 mm loading height : 2.200mm pneumatic lid suitable for cooling with N2 or Co2

Rühle Tumbler MKR 300, Ruehle Hightech Tumbler with vacuum, incl. mixing and tumbling arm, container size 300 liters, Touch-PC control, direct cooling by strong cooling unit, mixing and kneading, up to 25 rounds per minute, all stainless steel, with loading device. You are very welcome to inspect the machine at our facility in Koblenz, Germany. If you have any questions, please do not hesitate to contact us.

Blender Talsa MIX95P; 400 V, new, Bowl capacity 95 litres, engine completely in stainless steel, separate stirrer and Bowl drive, 1 speed, forward and return, Bowl tilt, Dimensions Lxwxh approx. 108x80x120cm, weight 170kg New machine, built in 2018

with mixing and Meng arm cooling vacuum

New machine - Contents: 1,000 litres when water is filled - Usable volume: approx. 800 litres depending on product characteristics - Maximum filling weight 1,000 kg - The mixer has a central bottom outlet - Containers, lids, swivel arm, mixing screw, V2A outlet housing

NNP Stainless vacuum tumbler, 1500Kg capacity, forward / reverse, with timer, two stainless lids, 3Ph