We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
119,320 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
Hand Feeding Covering Material, Hand Feeding Hard Spine Insert, Automatic Cardboard Feeding, Automatic Soft Spine Insert Feeding From Roll, Hot Glue, Format: Max. 530x400mm, Min. 110x155mm, Speed: Max. 15 Cycles/Min.
used
Manueller Blockhefter - Manual Stapler Nagel ENAK 50 Serial-No. 6017 -Online-Video-Inspection by Skype-Video- -We would be very pleased with your visit - more machines on Stock- -Available Immediately - Can be inspect- -On Stock Emskirchen / Nuernberg - Can be test-
used
Klemmbindesystem - Manual Binding machine Opus MB300 Format: A5, A4 (Hoch-/Querformat), A3 Querformat / formats A5+, A4+, A4+ Squared, A3+ landscape Gewicht: 19 kg / net weight: 19.0 kg Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nuernberg - Can be test
used
manueller Deckenherstellung - manual Casemaker Schmedt PraeDeck Year 05-1986 - Serial-Nr. 246 -Online-Video-Inspection by Skype-Video- -We would be very pleased with your visit - more machines on Stock- -Available Immediately - Can be inspect- -On Stock Emskirchen / Nuernberg - Can be test-
used
Manual Stapler Nagel enak Serial-No. 50/6-50/20B Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nuernberg - Can be test
used
Nutmaschine manuell / Creasing Machine - manuell Emil Kahle N80 Serial-No. 22003 Arbeitsbreite / Working width max. 800mm Manuell Fusspedal / Manuell foot operation -Online-Video-Inspection by Skype-Video- -We would be very pleased with your visit - more machines on Stock- -Available Immediately - Can be inspect- -On Stock Emskirchen / Nuernberg - Can be test-
used
Manueller Handstapler / Manual Hand Stacker Carl Stahl FL 600 Baujahr / Year 2000 - Serial-No. 13557 Tragkraft / Capacity max. 600 kg Eigengewicht / own weight 210kg Hubhoehe / Lift high max. 1600mm Gabel Laenge / forks length 1.150 mm Lastschwerpunkt / Load Center 600 mm Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nuernberg - Can be test
used
Raimann KR 310 E 340/120 multi-saw with movable disc - German production - year of production 1990 - DTR - number of hours 4452 h TECHNICAL PARAMETERS: - track width 340 mm - cutting height max 120 mm - cutting height with movable disc 85 mm - engine power 30 kW - minimum element length 700 mm - table width 740 mm - feed adjustable on the inverter 6-48 m/min - three rows of pawls - possibility of putting on a shoe - sleeve diameter 80 mm - length of fixed sleeve 190 mm - electric cutting height adjustment - electric shaft height adjustment - four upper pressure rollers - automatic central lubrication - laser - ruler - spigot diameter 250 mm Machine dimensions 250x200x220 cm weight 2000 kg
used
Fully automatic flatbed die-cutter, non-stop feeder, automatic introduction with large vacuum plate, double sheet cleaning station, platinum unit, turn die cutting frame, (batch delivery) non-stop delivery with belt, cutting force 300 TON, 4.500 speed/h, working with corrugated cardboard of thickness max. 9.5 mm, min. 0.8mm, The Machine Can Cut On Micro-corrugated Cardboard, Jobs Quick Change Device, Working With Compact Stock Of Thickness 1 mm And Beyond, Cutting Force 350 TON, Format: Max. 1055x1575mm, Min. 400x600mm, Standard Accessories
used
Conveyor belt with cleat belt, stainless steel, approx. 3.90 m long. Strap width approx. 62 cm.
used
Kolbus CASERMAKER DA 232 Year: 2004 Serial Nr.: 236 Transport feed Hopper feed of pre-cut boards Hot melt glue Copilot system with touchscreen Auto splice and waste cutter Automatic lubrication Max size 405 x cover 560, 110 x 155 mm • Max cover thickness 4 mm
used
Hand screw press - type "NEHER" -Good used condition Dimensions: LxWxH 1.4x1.2x2.3Meter Weight 850Kg Wckq0zxa
used
Item: Base Module Make: MAN B&W Type: L21/31 PCB: 0580-A & 0042-E Condition: USED Doc Rev: 14.0042.0 Rev 1.6 MBD: 1688285-9 BMI-II
used
Exhaust Manifold, Manifold, Discharge CAT PUMPS 49465 127747 for model 3520, 3527 Material: brass New ! Dimensions: 229 x 180 x 84 mm
used
Intake Manifold, Manifold, Inlet CAT PUMPS 49464 127745 for model 3520, 3527 Material: brass New ! Dimensions: 229 x 180 x 84 mm
used
Consistent precision when bending due to 3-point technology and pressure distribution via hydro cushion. Very good maintained condition. Has always been serviced regularly and annually by the company Bystronic (service reports are available). Servomotors were exchanged. Still some spare or wear parts new with it.
used
Machine FCS AE-400 Technical data Screw diameter Ø66mm; Injection pressure 1964 Kgf/cm²; Maximum shot volume 1026cm³; Max shot weight 937 gr; Injection rate 1368cm³/sec; Plasticizing rate 240kg/hr; Injection speed 400mm/sec; Screw rotation speed 250rpm; Mould clamping force 4000KN; Ejector stroke 140mm; Mould thickness 200~ 800mm; Suggestion minimum mold dim. (HxV) 450x450mm; Distance between tie bars 710x710mm; Mold platen 1040x1040; Pump driving motor 55,95KW; Heater capacity 33,2KW; machine dimensions (LxWxH) 8500x1950x2350mm; Oil tank capacity 1002Liter; Machine weight -25ton; Machine made 2008y; Produce: FU CHUN SHIN MACHINERY MANUFACTURE CO., LTD, Taiwan.
used
Mandrels, mandrels SOMET SK50 Type 685062 Diameter: Ø 60 x 215 mm / Ø 59 x 31 mm mounting: SK50 with wooden box used, tested ! dimensions ( wooden box ): 430 x 115 x 100 mm dimensions ( mandrel : 380 x 71 x 71 mm
used
Description: Internal dimensions approx. 1200 x 800 x 700 Machine number 3214 Including large lot of blasting material, protective screens Approx. Onsite Dimension. (l x w x h): 1,800 x 1,300 x 2,200 mm, weight approx.: 500 kg
used
Key data: 8 t, 420 mm, 120 mm
Machine Type: Hand Spindle Press Manufacturer: SCHULER Condition: good Offer Type: Used Machine Specifications: Compressive force: 8 t Projection: 120 mm Table: 420 x 235 mm Installation height: 175 mm Weight: 250 kg The machine is in good condition and ready for immediate use and can be viewed and demonstrated by us. We would be pleased if you are interested in our offer. Errors, modifications and prior sale excepted.
used
Description: Serial number: 2658 With electrode pliers, mobile device weight approx.: 100 kg, Approx. Onsite Dimension. (l x w x h): 1,100 x 500 x 900 mm
used
Description: Carrying capacity: 1200 kg Basket dimensions: approx. 1100 x 700 mm Approx. Onsite Dimension. (l x w x h): 2,500 x 1,700 x 1,100 mm, weight approx.: 200 kg
used
Ring bending machine, profile bending machine, bending machine, pipe bending tool, tube bender, tube bending machine, mandrel bending machine -Mandrel bending machine: mechanical profile bending machine -Accessories: see photos -Total dimensions: 1200/740/H1220 mm -Weight: 169 kg
used
Item: Base Module Make: MAN B&W Type: L21/31 PCB: 0580-A & 0042-E Condition: USED Doc Rev: 14.0042.0 Rev 1.6 MBD: 1688285-9 BMI-II
used
- Working range pipe max. Ø 6 – 50 mm - Pipe extension length 3,000 mm - Electronic three-axis control - Incl. existing bending tool D20xR40/D40xR80/D40xR120/ D50xR110 - incl. prev. Mandrels 20x2 / 20x1 / 40x2 / 50x2 - Weight approx. 750 kg - L x W x H approx. 3,800 x 700 x 1,500 mm - Incl. instruction manual as PDF
used
- Round tube steel DM 6 – 42 x 5 mm - Round tube stainless steel DM 6 – 42 x 3 mm - Pipe push-on length max. 6,000 mm - Programmable logic controller up to 20 angles - Digital display of longitudinal displacement - Digital display of torsion - Programmable, anticipatory mandrel retraction - Mandrel lubrication system by hand pump - Wrinkle smoother receptacle - Bending speed max. 13°/sec - Bending angle up to 180° + 10° deflection - Manual feed - Manual twisting - Right bending direction - Radii from 1.5 D - Incl. bending tool : - DM 12 mm - radius 36 mm ) / DM 15 mm - radius 37.5 mm - DM 18 mm - radius 36 mm - DM 22 mm, radius 44 mm with mandrel - DM 42 mm, radius 44 mm with mandrel
used
Description: mounted mandrels, Thermo grip veldoni HSK 63, 150 pieces weight approx.: 120 kg, Approx. Onsite Dimension. (l x w x h): 1,200 x 800 x 300 mm
used
Description: SEC-100 TBC is an automatic collaring machine for making manifolds It includes a feed table with either 1- or 2-axis control The tube is fastened from its both ends to the SEC-100 TBC A suitable collaring program is selected from the PC controls and an automatic cycle is started SEC-100 TBC makes all the collars according to the selected program Manual process: • preset the elliptical pilot hole parameters manually. • install the preadjusted collaring head and the clamps accoridng to the tube size. • set the axial tube stop. • mount the tube in the clamps. • push the start-button and the cycle will start. Automatic cycle: • the clamps close and the EC-100 mills the elliptical hole. • when the hole is ready, the EC-100 unit retracts. • the S-100 unit begins the collaring of the tube and the trimming of the collar. • finally the EC-100 returns to the milling ...
used
used
Approx. Onsite Dimension. (l x w x h): 400 x 250 x 150 mm, weight approx.: 5 kg
used
Key data: 20 t
Article code: 13-13-023 Manufacturer: Neher Very good general condition Machine workshop-tested Shipping time: All rights reserved. Year of construction: ca.1972 L x W x H: approx. 1600x1600x2300mm Weight: approx. 1200kg Max. pressing force: approx. 20 tons Wheel Diameter: ca.1600mm Working stroke: approx. 300mm Other accessories on request Price and other technical data on request
used
Key data: 20 t, 420 mm
Article number: 13-13-024 Manufacturer: Reyer Very good general condition Machine workshop-tested Shipping time: All rights reserved. Year of construction: ca.1972 L x W x H: approx. 1200x800x2000mm Weight: approx. 400kg Max. pressing force: approx. 20 tons Table surface: approx. 420x530mm Other accessories on request Price and other technical data on request
used
Description: With 11 drawers, each 900 x 600 mm, with compartment dividers Load capacity of one drawer 200 kg A card reader as well as a QR code and barcode scanner are integrated into the cabinet Gühring Tool Management Software (GTMS) Approx. Onsite Dimension. (l x w x h): 1,000 x 760 x 1,750 mm, weight approx.: 100 kg
used
Description: - hand lift cylinder with different inserts - one hydraulic cylinder pressing force: 10 to - one hydraulic cylinder pressing force: 0.5 to - with extensions Approx. Onsite Dimension. (l x w x h): 660 x 350 x 160 mm, weight approx.: 20 kg
used
Description: Reading 0.5 HR. Ball and diamond indenter. N.5 setting blocks (3xHRC, HRBW, HRA). Max measurable height when the lead screw protector is added 100 mm, without a lead screw cover 170 mm. Measurement depth 135 mm. Durometer dimensions 185 x 465 x 640 mm. Measuring force: 588,4 N (60 Kgf) /980,7 (100 Kgf) /1471 N (150 Kgf). The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 530 x 400 x 750 mm, weight approx.: 82 kg
used
Description: stroke 70 mm Approx. Onsite Dimension. (l x w x h): 200 x 300 x 700 mm, weight approx.: 30 kg
used
Description: interior dimensions approx. 900 x 550 x 700 mm with buckets of sand Approx. Onsite Dimension. (l x w x h): 1,800 x 1,400 x 1,600 mm, weight approx.: 800 kg
used
Description: maximum lifting height 1600 mm, capacity 800 kg Approx. Onsite Dimension. (l x w x h): 1,600 x 700 x 2,000 mm, weight approx.: 235 kg
used
Description: jaw width 80 mm , length 100 mm Approx. Onsite Dimension. (l x w x h): 280 x 70 x 130 mm, weight approx.: 5 kg
used
Description: Additional information: Filter cartridge/3-5μm 340 x 450 mm - H 34 2240/40 KIT MANN FILTER oil filter element, Mann Filter filter element for oil with the highest quality for wire erosion, sinking erosion and spark erosion drilling. The Mann + Hummel oil filter element H 34 2240/40 KIT reliably removes dirt and solid particles such as dust, metal abrasion, oil, carbon, soot, etc. It offers optimal protection and is used to filter engine, hydraulic and transmission oil. Technical data: Height: 450 mm External diameter: 340 mm weight approx.: 25 kg, Approx. Onsite Dimension. (l x w x h): 350 x 350 x 490 mm
used
Olland manual slicer, dimensions: 700 mm x 800 mm x 1500 mm.
used
Description: table dimensions approx. 315x215 Approx. Onsite Dimension. (l x w x h): 1,000 x 960 x 2,160 mm, weight approx.: 300 kg
used
weight approx.: 100 kg, Approx. Onsite Dimension. (l x w x h): 1,450 x 260 x 1,200 mm
used
Description: With double rotating brush Approx. Onsite Dimension. (l x w x h): 800 x 400 x 400 mm, weight approx.: 20 kg
used
Description: With double rotating brush Approx. Onsite Dimension. (l x w x h): 800 x 400 x 400 mm, weight approx.: 20 kg
used
Description: With double rotating brush Approx. Onsite Dimension. (l x w x h): 800 x 400 x 400 mm, weight approx.: 20 kg
used
Description: With double rotating brush Approx. Onsite Dimension. (l x w x h): 800 x 400 x 400 mm, weight approx.: 20 kg
used
Description: With double rotating brush Approx. Onsite Dimension. (l x w x h): 800 x 400 x 400 mm, weight approx.: 20 kg
used
Description: Manual tools + TRACTEL 2 Boxes TRACTEL Blocfor Approx. Onsite Dimension. (l x w x h): 900 x 500 x 300 mm, weight approx.: 10 kg
used
Description: • Lot of manual strapping machines • It includes: • 9 x manual strapping machines for plastic strap • 1 x SIGNODE PFH manual steel strap tensioner Approx. Onsite Dimension. (l x w x h): 1,200 x 800 x 400 mm, weight approx.: 40 kg