136,860 used machines on RESALE, but how to find them? Machine Search
Pressure regulator manually adjustable, ultrapure gas regulator DRÄGER TESCOM type: 44-2260-242-010 inlet pressure: max. 27 bar outlet pressure: 0 - 1.7 bar stainless steel ! Dimensions: 120 x 120 x 90 mm
Solenoid valve fuel gas MERTIK MV 10.2.4 Pn: 0.15 MPa (1.5 bar) nominal diameter: 10 mm (NW10) fitting: 1/2 coil: 220 V AC 50 Hz IP55 New ! Dimensions: 100 x 90 x 80 mm
Pressure regulator manually adjustable, ultrapure gas regulator DRÄGER TESCOM type: 44-2262-242-009 inlet pressure: max. 27 bar outlet pressure: 0 - 7 bar stainless steel ! Dimensions: 120 x 120 x 60 mm
Aprovis FriCon Gas Dehumidifier and Desulfurizer Plant for cleaning Biogas. Biogas cleaning plant including APROVIS FriCon 150/500-40-15-2-I0 Gas Dehumidifier and Desulfurizer Plant. Type: ESA 44,8m³ Year: 2019 Fuel: Biogas Scope of supply: Gas Cooler, Air Cooled Liquid Chiller, Base Frame for Gas Dehumidifier, Insulation, Demister DN 200, Syphon. Technical data for Desulfuriser Plant: >3.000 mg/m 3 H 2 S and 600 Bm³/h Gas flow: 600 Bm³/h (at around 37-40 o C) H 2 S-Input concentration: 2.000 ppm (3,000 mg/m³) Gas temperatures (entrance): 25-40 o C H 2 S load: maximum 1.800 g/h Columns pressure loss: < 3-8 mbar Pressure level: 45 mbar (Test pressure 50 mbar) Low pressure: maximum –10 mbar. Minimum inlet pressure: 2-4 mbar Hot water: DN=32 Dung use: app. 3,0 kg per day full load (approx. 110-115 Ct costs 1 kg) Extra air: 11-14 % Container/tank size: approx. ...
Pressure regulator manually adjustable, ultrapure gas regulator DRÄGER TESCOM type: 44-2261-242-010 inlet pressure: max. 27 bar outlet pressure: 0 - 3.5 bar stainless steel ! Dimensions: 120 x 120 x 60 mm
Pressure regulator manually adjustable, ultrapure gas regulator DRÄGER TESCOM Type: 44-3262H283-001 Inlet pressure: max. 35 bar Outlet pressure: 0 - 7 bar stainless steel ! Mint ! Dimensions: 140 x 140 x 100 mm
Available For sale Gas Generator MWM Type TCG 2016 V 16 1300 KVA Year 2007 Boigas book maintenance
Hot gas welding machine, multi-stage SCHLOMA ZIS-487/2 200 / 400 / 600 W 220 V AC approx. 2.8 m connection cable suitable air supply - see LU235 ! New !' Dimensions: 470 x 200 x 50 mm
2008 Herco ACR SYSTEM 23-1000 ACTIVATED CARBON RECOVERY SYSTEM Gas recovery system The installation is 10 years old, has a max. adsorption capacity for 75 fridges per hour, with a suction capacity of 850 m³/h. It is a system with activated carbon adsorption, with desorption over a cryo-unit. Designated Application Scope of Application The delivered recovery plant is designed and manufactured for reclaiming propellants refrigerator recycling. The propellants, vaporized during the shredding process, are sucked off from the shredder and adsorbents in the recovery plant. Other applications are not provided. If the plant is used for other applications, only the user carries the whole risk for damages. General data Application : Propellant recovery Plant designation : Activated carbon recovery system Plant type : ACR-SYSTEM 23-1000 Year of construction : 2008 Technical data ...
Offer 24589 Specifications: - Suitable for welding steel, aluminum special metals, Cr Ni, etc. - Welding current 450 A 60% ED - 360 A 100% ED - Welding current adjustable from 3 A - 450 A - Synergic setting control FRONIUS - FRONIUS water cooling unit - Separate wire feeder case - Intermediate package device – wire feeder case 14 m - 4 rolls of wire feeder infinitely adjustable - MIG - MAG Hosepack water-cooled approx. 4 m - Ground cable -Reducer - Mobile undercarriage - Connection 400 V / 6.6 A / 8.7 kVA - Space requirement approx. W 650 x H 900 + 450 x D 1100 mm - Weight approx. 200 kg
Offer 24600 Specifications: - Suitable for welding steel, aluminum special metals, Cr Ni, etc. - Welding current 450 A 60% ED - 360 A 100% ED - Welding current adjustable from 3 A - 450 A - Synergic setting control FRONIUS - FRONIUS water cooling unit - Separate wire feeder case - Intermediate package device – wire feeder case 14 m - 4 rolls of wire feeder infinitely adjustable - MIG - MAG Hosepack water-cooled approx. 4 m - Ground cable -Reducer - Mobile undercarriage - Connection 400 V / 6.6 A / 8.7 kVA - Space requirement approx. W 650 x H 900 + 450 x D 1100 mm - Weight approx. 200 kg
new
Key data: 1011 V, 400
Fast delivery! Gasgenerator Natural gas or Biogas Brand; Siemens Type; SGE-42HM Power; 1,011kWe RPM; 1500RMP Voltage; 400V Frabrication year; 2020 Guascor, Siemens, CHP, Gasgenerator, Biogas, Syngas, Jenbacher, MWM, MTU, Spareparts
Offer 24603 Specifications: - Suitable for welding steel, aluminum special metals, Cr Ni, etc. - Welding current 450 A 60% ED - 360 A 100% ED - Welding current adjustable from 3 A - 450 A - Synergic setting control FRONIUS - FRONIUS water cooling unit - Separate wire feeder case - Intermediate package device – wire feeder case 10 m - 4 rolls of wire feeder infinitely adjustable - MIG - MAG Hosepack water-cooled approx. 4 m - Ground cable -Reducer - Mobile undercarriage - Connection 400 V / 6.6 A / 8.7 kVA - Space requirement approx. W 650 x H 900 + 450 x D 1100 mm - Weight approx. 200 kg
Key data: 250 KW
2G Agenitor 406 BT70 ready for connection, electrical efficiency is 42.5%. New in original packaging, with warranty. Natural Gas, Hydrogen Ready. Electrical power - 250 kW Thermal power - 264 kW Make and Model: 2G Agenitor 406 BT70 Fuel: Natural gas Year - 2022 Hours: 0 Capacity: 250kW V: 400 HZ: 50 Scope of supply: Engine, Alternator, Frame, Oil Tank, Gas Train, Separate Cabinet with Control System and Operating Unit. Documentation. Available for sale from Gas Engine Exchange . Please check our complete range of equipment at gasengineexchange.com.
Intergas dosing unit DSD 500, type A, foaming unit and gas dosing station At the moment we have an intergas dosing unit for sale. This was a part of a project. Therefore the machine was used only very limited. - Operating hours: well below 100h - Weight: approx. 500kg Find more here - .ucymachines/
Offer 24604 Specifications: - Suitable for welding steel, aluminum special metals, Cr Ni, etc. - Welding current 450 A 60% ED - 360 A 100% ED - Welding current adjustable from 3 A - 450 A - Synergic setting control FRONIUS - FRONIUS water cooling unit - Separate wire feeder case - Intermediate package device – wire feeder case 1 m - 4 rolls of wire feeder infinitely adjustable - MIG - MAG Hosepack water-cooled approx. 4 m - Ground cable -Reducer - Mobile undercarriage - Connection 400 V / 6.6 A / 8.7 kVA - Space requirement approx. W 650 x H 900 + 450 x D 1100 mm - Weight approx. 200 kg
Key data: 850 KW
2 X MTU 8V 4000 L63 Trigeneration Plants Hours: 34,000 Year: 2013 Fuel: NAT GAS Control Panel: MTU Capacity: 2 X 850kW Voltage: 400 HZ: 50 Service History: At 21,000 hours, major maintenance was performed relating to: pistons, liners, turbo overhaul, and intercooler replacement. At 42,000 hours, another maintenance is scheduled identical to the 21,000-hour one + connecting rod replacement. At 31,500 hours, the generator was overhauled with bearing replacement. The "exchange" overhaul is scheduled at 63,000 hours. STOPPED IN MARCH 2024 Scope of supply: Complete Trigeneration Plant. The trigeneration plant consists of two endothermic engines fueled by methane gas, each having the following main characteristics: • Chemical power input 2,130 kW • Electrical power 849 kW • Engine jacket heat recovery 511 kW at 78/90°C • Diathermic oil boiler from exhaust ...
Machine Type: MIG/MAG Inverter Welding Machine Make Merkle Type MobiMIG 180 K Serial No. 89.754 Connection voltage 1 x 230 Volt Adjustment range 25 – 180 amps Duty cycle 20% ED at 180 amps 60% ED at 110 amps Current adjustment infinitely variable Cooling inverter through built-in fan Cooling burner gas-cooled Portable assembly system design Wire Feeder 2-Roller Gearbox Fuse 16 Ampere Dimensions L x W x H 450 x 210 x 480 mm Special Accessories ColdMIG Welding Process E-welding, MIG soldering, cored wire welding Weight 17 kg Age 12 years Condition workshop tested, very good incl. UVV workshop test report Scope of supply welding system with the following accessories: 1 piece of welding torch SBT 157 G, 3 mtr. long 1 piece ground cable 1 piece pressure reducer 1 roll of welding wire D-200 coil, 5 kg 1 can of non-stick sp ...
1. J616C Engines (2 units) Power: 2519 kVA General Overhaul (E60): 2011 Operating hours since overhaul: 20,503 Year of Manufacture: 1997 Serial numbers: 1200959 / 1200956 2. J320 GS S04 Engine (1 unit) Power: 2519 kVA General Overhaul (E60): 2011 Hours of operation since overhaul: 19,059 Year of Manufacture: 1997 Serial Number: 1200954 Scope of Supply: Diane XT3 Control Panel GEC ALSTHOM transformers ( 3 units: 2x2500 kVA, 1x1600 kVA) Gas Line Heat exchanger Fume exchanger Pumps Tabletop Cooler - ( Radiators ) Oil tank
Key data: 600 KW
After E70 about 4000h only walked. If you are interested, please contact us via WhatsApp at 004915229184328.
have for sale qty 2x used containerised gas gensets. Engine No 1 CHP complete unit J320GS Power: 1063Kw Year: 2000 Hours: 50,000 Excellent condition Bio Gas Gas Switchable Panels control: DIA.NE BLUE Complete Overhaul done at 60,000 hours Engine No 2 CHP complete unit J320GS Power: 1063Kw Year: 2011 H Complete Overhaul done at 60,000 hours Bear: 51,000h Very good condition Bio Gas Switchable Panels control: DIA.NE X
Centrax Gas Turbine-Generator Package - (USED) 50Hz Fuel Description Bio Gas Only Unit type M2000 KB5S Running hours 126701 Starts 2950 Megawatt hours 349558.0 mwhr Turbine speed 14580 RPM inspection report available
Gas bottle not included Auction-ID: A1-50251-280
Mobile bottle trolley and hose burner Gas bottle not included Auction-ID: A1-50251-25
used
Trumpf 3030 3000W 1999 Perfect machine, always under maintenance, with a new 3200 generator. CNC Siemens (no Bosch) Complete with everything, including disassembly.
used
Trumpf 3030 3000W 1999 Perfect machine, always under maintenance, with a new 3200 generator. CNC Siemens (no Bosch) Complete with everything, including disassembly.
Mobile bottle trolley Gas cylinders not included Auction-ID: A1-50251-283
Trumpf 3030 3000W 1999 Perfect machine, always under maintenance, with a new 3200 generator. CNC Siemens (no Bosch) Complete with everything, including disassembly.
Key data: 2022 KW, 11000 V
UK Power Generators Ltd have in stock GAS GENERATING SET available for sale: Introducing the G3520E Generator Set — a high-performance, reliable powerhouse that's ready to tackle any challenge! Manufactured in 2013, this unit boasts an impressive output power of 2022 kW at a robust 11 KV, making it the ideal solution for demanding operations. With only 40,000 running hours Engine Model: G3520E (Serial No. GZE00249) Alternator Model: SR 4 HV (Serial No. ADB00414) Arrangement No.: 3856060 (Engine) / 160-1360 (Alternator) Ready to power your world, this unit comes with complete maintenance records. High Efficiency: The G3520E engine, paired with the SR 4 HV alternator, ensures low fuel consumption and optimal power output. Durability: Built to last, with proven performance in tough conditions. Versatility: Ideal for industrial, commercial, and lar ...
Key data: 4500 KW, 10500 V
MWM TCG2032V16, 4300kw 10.5kv 50Hz -- USD1.3 million
Key data: 8000 KW, 750 1/min
Complete natural gas Power plant based on a Engine Manufacturer: WARTSILA Engine Model: W16V34SG Engine Power: 8000 KW Year of Manufacture: 2015 Total Operating Hours: 37 000 hours since new
I am pleased to offer for sale the complete Heat Recovery Steam Boiler with gas burner. Please see below key details about the power plant: Boiler Manufacturer: GEA - DELTAK Capacity: 20 ton / hour at 25 bar Year of Manufacture: 2006
Key data: 500 , 400
Available 5 units of Guascor 360. All the accesories (is complete power plant) are also available but you can only take de engines if you want. Power:500kW YOM:1998´ Hours: 60000 h Generator: Leroy Somer Voltage: 400V
TO WHOM IT MAY CONCERN; WE VE 2 PCS USED REPORTED EXHAUST GAS TURBOCHARGERS ABB TPS 57 - D01 AT STOCK PLS FIND DETAILS ON BELOW TYPE TPL 57-D01 HT 466584 & 466585 N MAX 718 TMAX 650 nMAX 682 620 PLS FIND SERVICE REPORT ON FILES SECTIONS IF YOU VE ANY FURTHER QUESTIONS PLS DO NOT HESITATE TO CONTACT WITH US With Kind Regards ; Aliaga Marine Services E-mail: info/aliagamarine.com Phn/Fax:+90 232 618 03 85 Mobile: +905556084850 abc.aliagamarine.com TURKEY
maximum number of results exceeded
please refine your search
100 € 
