gas man used for sale

Mobile compressor for the evacuation of natural gas from pipelines for maintenance and repair to offer. There are only few trucks of this worldwide. This truck is fully operational and used to be operated only by Gas Industryi n the past! For first details please refer to attached file. The truck is located in the north of Germany (between Bremen and Hanover). A visit is possible by appointment. Further details can be provided on request. - The machine has been completly refurbished in 2022 (documentation/ certification available -> see attached picture) - The truck/ machine is fully operational - Reason for replacement was the truck/ car body ( wanted to have a modern truck – nothing to do with compressor) - Current replacement price of compressor: around 4 Million EUR – delivery time around 36-40 months - Optionally we could provide an engineer from Gas Industry for machine  ...

COMPLETE POWER PLANT OF 16 MEGAWATT 4 pieces MWM 2032V16 Year of manufacturing 2011 Running hours: #1 at 18607 operating hours #2 at 12261 operating hours #3 at 17068 operating hours #4 at 19206 operating hours Scope: Generator sets Control panels Gasline Pumps Heat exchanger Tranformers Break panels Silincer 00316 38 63 90 71 GAS POWER HOLLAND

Key data: 1451 , 1487 , 400

2012 Jenbacher J420G Gas Generator We have 2 units Jenbacher 420 available for sale, please see below the details for the units: Unit 1: Year of Manufacturing: 2012 Running hours: 73,357 hours Fuel: Gas Power Output: 1451 KW Model: J 420 GS-B 25 Frequency: 50Hz Speed: 1500RPM Voltage: 400 V Serial No: 1047229 Unit 2: Year of Manufacturing: 2012 Running hours: 74,179 hours Fuel: Gas Power Output: 1487 KW Model: J 420 GS-B L Frequency: 50Hz Speed: 1500RPM Voltage: 400 V Serial No: 1047212 Scope of supply: 1. Engine and Alternator mounted on skid 2. Breaker panel 3. Engine control panel 4. Gas lines Please see attached the pictures for the units available for sale. Kindly advise your interest if you would like to get further details feel free to contact us back. For arranging the  ...

Key data: 800 KW, 1000 kVA

ENGINE: 12M33D900E310NG FREQUENCY (HZ): 50 VOLTAGE(V): 400V/230V GENERATOR POWER: 1000kVA) / 800(kW) STARTING: ELECTRIC CONTROL SYSTEM: SELF-CONTROL FUEL TYPE: LPG; LNG; Gas COOLING: WATER-COOLED WEIGHT: 7500kg DIMENSIONS L/W/HEIGHT (MM): 550020002100 The engines are new, complete including control, diesel tank, exhaust and batteries. Network monitoring, grid feed-in Soundproofed Immediately ready for use. Control: Deep Sea Electronics (DSE) Alternator: Leroy-Somer Additional: Automatic Transfer Switch (ATS) 63A/100A ABB & Schneider Disconnectors GenCloud Connect with a phone or computer Single-phase valve 50°C-55°C Radiator External Diesel Tank Lubricating Oil Heater Water Heating Dispatch: Worldwide transport including unloading is possible for an extra charge To be able to quote an exact freight price, please send us an inquiry with your details and full a ...

Key data: 400 KW, 500 kVA

ENGINE: Man E2842LE232 FREQUENCY (HZ): 50 VOLTAGE(V): 400V/230V GENERATOR POWER: 500(kVA) / 400(kW) STARTING: ELECTRIC CONTROL SYSTEM: SELF-CONTROL FUEL TYPE: BIOGAS COOLING: WATER-COOLED WEIGHT: 6400kg DIMENSIONS L/W/HEIGHT (MM): 550020002100 The engines are new, complete including control, diesel tank, exhaust and batteries. Network monitoring, grid feed-in Soundproofed Immediately ready for use. Control: Deep Sea Electronics (DSE) Alternator: Leroy-Somer Additional: Automatic Transfer Switch (ATS) 63A/100A ABB & Schneider Disconnectors GenCloud Connect with a phone or computer Single-phase valve 50°C-55°C Radiator External Diesel Tank Lubricating Oil Heater Water Heating Dispatch: Worldwide transport including unloading is possible for an extra charge To be able to quote an exact freight price, please send us an inquiry with your details an ...

We have to sell Low voltage Engines for explosive gas atmospheres are with us on site, we offer transport at this price in Polish, abroad you have to call and ask about the cost. The engines are from 2018, but still originally packed was purchased as a spare part. More information about the engine is in the last picture. The price is for 1 piece, for the purchase of two we do an extra discount. Worth!

Key data: 200 KW, 250 kVA

ENGINE: Man E2676LE202 FREQUENCY (HZ): 50 VOLTAGE(V): 400V/230V GENERATOR POWER: 250(kVA) / 200(kW) STARTING: ELECTRIC CONTROL SYSTEM: SELF-CONTROL FUEL TYPE: BIOGAS COOLING: WATER-COOLED WEIGHT: 4400kg DIMENSIONS L/W/HEIGHT (MM): 430013002000 The engines are new, complete including control, diesel tank, exhaust and batteries. Network monitoring, grid feed-in Soundproofed Immediately ready for use. Control: Deep Sea Electronics (DSE) Alternator: Leroy-Somer Additional: Automatic Transfer Switch (ATS) 63A/100A ABB & Schneider Disconnectors GenCloud Connect with a phone or computer Single-phase valve 50°C-55°C Radiator External Diesel Tank Lubricating Oil Heater Water Heating Dispatch: Worldwide transport including unloading is possible for an extra charge To be able to quote an exact freight price, please send us an inquiry with your details an ...

Sell two new (commissioning 01.05.2023) wood gasifier - pyrolysis plants (each 50KW electric and 120KW thermal) with immediate effect for health reasons. The systems are sold as a complete system with entry system, moving floor (Heizomat) and dryer (11KW) 250KW (cooler). At the moment, the systems are not running in continuous operation, as the heating concept could not be implemented for health reasons. The systems run reliably and can be controlled and monitored via a remote monitoring system. In addition to energy, about 1.5 to 2 tons of biochar or biochar are produced per month. If necessary, support can be provided during dismantling and assembly.

Key data: 1622 , 1835 , 400

2012 Caterpillar 3516C Gas Generator Containereed Package These containerised package XL has been bought for the UK project about couple of years ago but the project did not go ahead as planned. It has approx 25,000 hours and another unit with 26,000 hours on the clock. The containers also have CSC approved and testing certificate for shipping. The details are given below:- Technical specification of CAT 3516C Generating set Unit 1: Sr No: XL600164 Ar No: 3787743 Advertised Power 1622 KW Speed: 1500 RPM YOM: 05/2012 Unit 2: Sr no: XL600135 Arr no: 3787743 Advertised Power: 1622 KW Full load Speed: 1500 RPM YOM: 04/2012 For arranging the visit inspection; and pricing information feel free to contact us at: Infoukpowergeneratorsltd 00447956518924

The machine is in good technical condition. Maximum table size: 12000 x 2500 mm Maximum sheet thickness: 25 mm (plasma torch) Maximum drilled diameter: 30 mm (drilling unit) Filter device EKOFAN N8-10600 Software program for creating cutting plans AsperWin MSNC 500 control system Plasma source Kjellberg HiFocus 280i Compressor GA5 FF-13 EUR 400+N 50 TM CE Atlas Copco By prior arrangement, the possibility of a tour in progress.

Arc welder CLOOS Type GLC 206 Fabr. No. 1150 Year of construction approx. 1984 Nominal power 200 Amp. Power 250 Amp. - 60% ED 200 Amp. - 100% ED Adjustment range 18 steps Mains connection 380 Volt, 50 Hz, 32 Amp. Plug- wire feed adjustment - external wire feeder CLOOS type CK 21 with 2 roller drive - equipped with 1.2 mm welding wire hose package 3 meters with central connection - current indicator - voltage display - air cooling with fan - pressure mannometer for gas cylinder Space requirement L x W x H 1200 x 460 x 960 mm Weight 160 kg; used

Inert gas welding device, inert gas device, welding rectifier -Max. Welding power: 330 A -Remote control connection -4 roller drive -Water-cooled -with: removable wire feeder -Incl. Ground cable -Gas valve -Dimensions: 550/900/H1170 mm -Weight: 116 kg

Arc welder CLOOS Type GLC 403 PA-TS Fabr. No. 8198 Year of construction 1994 Nominal power 400 Amp. Power 400 Amp. - 60% ED 310 Amp. - 100% ED setting range infinitely variable connection hose package 4.5 meters Mains connection 380 Volt, 50 Hz, 32 Amp. Plug 2 stroke and 4 stroke welding device - external wire feeder type CK 72/5TSZK with 2 roller drive and 4.5 meter hose package- 4 meter hose package with central connection and EHRIG hand torch type Senator-800-D - Water-cooled - Pressure mannometer for gas cylinder - Welding machine equipped with 1 mm welding wire Space requirement L x W x H 1250 x 600 x 1100 mm Weight 300 kg good condition; used

Arc welder EWM Type MIG 230 Fabr. No.: L/0340 Year of construction 1994 Power 230 Amp. = 35 % ED 120 Amp. = 100 % ED Setting range 8 steps Mains connection 400 Volt, 50 Hz, 16 Amp. Plug 2-stroke and 4-stroke welding device- Spot welding device - 2-roller wire feed - 3 meter hose package with central connection - Welding gas pressure reducer Space requirement L x W x H 1000 x 450 x 700 mm Weight 70 kg good condition; used

Key data: 736 , 400

2 x Jenbacher 316GS BO3 Natural gas Generator Set Model: Jenbacher 316GS BO3 Fuel: Natural gas Year: 1996 Hours: 41,000 and 42,000 Capacity: 2 x 736 kW HZ: 50 Voltage: 400 V Scope of supply: Engine, alternator, heat exchange system, full installation including transformer and electric power component. General Information : The engine has been serviced by Jenbacher. Available for Sale Now. Price: Please Apply

Engine Make MWM Engine Type TCG 2020 V20 Power KW 2000 KW Power Output 1983 KW RPM 1500 Fuel Natural Gas Generator Model Marelli MJH 630 LA4 Volts 10000 Hz 50 Year of Manufacturing 2018 Total Running Hours 0 brand new, directly available

Engine Make CATERPILLAR Engine Type CG 170-20 Power KW 2062 KW RPM 1500 Fuel Natural Gas Generator Model Marelli MUH 630 LA4 E20 Volts 11000 Hz 50 Year of Manufacturing 2018 Total Running Hours 0 BRAND NEW DIRECTLY AVAILABLE 3 PIECES

Charvet S.A. s/s cooking vessel, type: A, gas heated, inside dimensions: 700 mm x 640 mm x 580 mm, total dimensions: 1180 mm x 1100 mm x 1300 mm.

Brand Deutz Model: Gas generator set 1460 kVa Year of construction: 2001 Serial number: 69886750152 Capacity (KvA) 1460 Capacity (Kw) 1168 Engine brand Deutz Engine model TBG620V12 Motor capacity (Kw) 1050 Fuel Natural gas Alternator Brand Stamford Alternator Model HCI734F2-CG Voltage 400 - 231 Frequency (Hz) 50 RPM 1500 Amperes (A) 2107 Dimensions LxWxH (mm) 4700 x 1600 x 2600 Weight (kg) ca 10500 Number of stucco in stock 1 Made in Germany Comments Low hours builded out, no electric panel, no cooler, will be sold in present condition

Brand Deutz Model: Gas generator set 1460 kVa Year of construction: 2001 Serial number: 69886750151 Capacity (KvA) 1460 Capacity (Kw) 1168 Engine brand Deutz Engine model TBG620V12 Motor capacity (Kw) 1050 Fuel Natural gas Alternator Brand Stamford Alternator Model HCI734F2-CG Voltage 400 - 231 Frequency (Hz) 50 RPM 1500 Amperes (A) 2107 Dimensions LxWxH (mm) 4700 x 1600 x 2600 Weight (kg) ca 10500 Number of stucco in stock 1 Made in Germany Comments Low hours builded out, no electric panel, no cooler, will be sold in present condition

Complete 96 MWe gas fired black start/ peak load power station, consisting of 4 (four) GE Frame 5N Gas Turbine Sets 24 MW each. Each set consists of a: • Gasturbine • Generator • Diesel Engine • Main Gearbox • Auxiliary Gearbox • Speedtronic Mark II control system • Exhaust plenum • Air inlet filter house 125 MVA transformer With or without building. additional info on request.

Max. operating temperature: 1600°C, including control cabinet, feeder and a defective glove box.

Circular cut diameter: 40-1000mm, max. cutting depth: 40mm, machine was scarcely used.

Nominal heating power: 80kW, length: 710mm, width: 1805mm, height: 1072mm.

Nominal oil/gas output: 460kW, max. rated power input: 1000W, were maintained regularly.

Nominal power: 468.2kW, max. temperature: 100°C, capacity: 59l, length: 1870mm, width: 845mm, height: 1460mm, weight: 465kg, was maintained regularly.

Nominal heating output: 22.5-90kW, weight: 175kg, the machine was never used.

There are two identical burners available, power: 350-2800kW, connection pressure: 15-500mbar, connected load: 9.23kW.

Fuel: natural gas, power: 300-2000kW, connection pressure: 15-500mbar, electric power: 4.32kW, operational hours counter: 38,723h, with documentation, without control cabinet.

(1) Gas (2) Fuel (3) Electric: 2   Temperature maximum: 1050 C° Capacity (kg): 5000 kg Connection 3 x 250 Amp Power 200 KW Driven loading cart with 5000 Kg capacity Temperatur 50 - 1050 Gr Celsius Heater heatmasters 2 chanells with 12 elements (AF3.25 wire) Control HM-1000 Controller HM-Rigel Version 2.2b (T) Insulation ceramic wood / fibre 200 mm For Stress relieving, annealing, normalizing, heat treament Length:3650mm Width:2545mm Height:4500mm Weight:4400kg INDUSTRIAL FURNACES  ;Furnaces are used in many industries to produce a wide range of products under demanding requirements.  this extensive design and manufacturing capability in thermal processing equipment is the solution for your high temperature furnace requirements.  with wide assortment of furnaces, including Continuous, Batch, Car Bottom, Solution Heat Treat and Atmosphere. & ...

Arc welder Type: Euromag 35-2 Manufacturer Messer Griesheim

Arc welder Manufacturer: Oerlikon Type: Minicito

Machine type MIG/MAG inverter welding system Brand Mahe Type Eco MIG 300 Digital Supply voltage 3 x 400 volts Setting range 10 – 300 amperes Duty cycle 40 % ED at 300 amps 60% ED at 240 amps Current adjustment infinitely variable incl. wire automatic Cooling inverter by built-in fan Cooling burner gas-cooled Design of mobile compact system Wire feed gearbox 4-roller gearbox Fuse 16 Ampere Dimensions L x W x H 880 x 400 x 635 mm Special accessories wire switch without power for threading TIG DC, without RF Rod electrodes weldable Weight 34 kg Age as good as new Condition workshop tested, as new, incl. UVV workshop test report Scope of delivery welding system with the following accessories 1 piece welding torch 3 mtr. long 1 piece ground cable 4 mtr. long 1 piece pressure reducer argon with 2 pressure gauges 1 roll of weldin ...

Machine type MIG/MAG inverter welding system Brand Mahe Type Eco MIG 300 Analog Supply voltage 3 x 400 volts Setting range 10 – 300 amperes Duty cycle 30 % ED at 300 amps 60% ED at 240 amps Current setting 12 switching stages Cooling inverter by built-in fan Cooling burner gas-cooled Design of mobile compact system Wire feeder 4-roller drive Fuse 16 Ampere Dimensions L x W x H 880 x 400 x 635 mm Special accessories wire switch without power for threading Rod electrodes weldable Weight 34 kg Age as good as new Condition workshop tested, like new, incl. UVV test protocol Scope of delivery welding system with the following accessories: 1 piece welding torch 3 mtr. long 1 piece ground cable 1 piece pressure reducer argon with 2 pressure gauges 1 roll welding wire D-300 coil, 5 kg 1 can non-stick spray 1 piece spare parts box, k ...

Key data: 130

Complete Containerised Trigeneration Tedom Genset 130kW Natural Gas. Fuel: Natural gas Year: 2017 Hours: 12,000 Capacity: 130 kW HZ: 50 Voltage: 400 V Scope of Supply: Engine, Alternator, Frame, Control System, Gas Line, Absorber, Cooling Tower, Water pumping system. Available for Sale Now.

MAN E0826 E302 Natural Gas Generator Set for sale. Model: MAN E0826 E302 Fuel: Natural Gas Year: 2004 Hours: 200 Capacity: 65 kW Hz: 50 Voltage: 400 V Scope of supply : Engine, alternator, acoustic canopy with panels, exhaust gas heat exchanger and other accessories. Price: 25,000€

Achievement: 280A at 40% 230A at 60% 175A at 100% Wire feed: 1 - 20 m/min. Equipped with: - Sweat pack - Massa cable - Gas valve - Automatic welding helmet -Operating instructions Machine LxWxH: 1000 x 565 x 900 mm Machine weight: 145 kg

Machine type MIG/MAG inverter welding system Make RILAND Type MIG 180PGDM Supply voltage 1 x 230 volts Adjustment range 15 – 180 amperes Duty cycle 20 % ED at 180 amps 60% ED at 110 amps Current adjustment infinitely variable Cooling inverter by built-in fan Cooling burner gas-cooled Portable assembly system version Wire feed gearbox 2-roller gearbox Fuse 16 Ampere Dimensions L x W x H 386 x 170 x 300 mm Special accessories TIG welding DC without HF E-welding Weight 8 kg Age 2 years As good as new Scope of delivery welding system with the following accessories: 1 piece welding torch MB 24, 2 mtr. Long 1 piece pressure reducer argon 1 piece ground cable 3 mtr. long, 16 sq m 1 piece electric welding cable 3 mtr. long, 16 sq m 1 piece of aluminum equipment 3 power nozzles aluminum, 1.0 mm Ø 3 pieces of current nozzles stee ...

The power plant, based on a 5 MW gas turbine CENTRAX 501 KB7 is complete with all needed equipment, allowing a steam output of 20 tons per hour at 20 bar. From ZERO hours until the last working day all maintenance was performed by Centrax under full maintenance contract.

Hello all We have in our stock in Turkey 1 unit Caterpillar 3516 containerised gas generator system İn good condition 1070 Kw in 1500 RPM please email us at infofin-marine fin-marine

offer 22686 Specifications: - Welding current 300 A 40% ED - 240 A 60% ED - 180 A 100% ED - Welding current adjustable 10 A - 300 A - Digital volt + ampere display - 4 roller wire feed infinitely adjustable - 2 stroke - 4 stroke - regulation - Eco Pulse Front Panel with various welding settings - water-cooled hose package approx. 4 running meters - Ground cable -Reducer - Water chiller unit - Connection 400 V / 32 A / 18 kVA - Space requirement approx. W 450 x H 1200 x D 1050 mm - Weight approx. 80 kg

HP Fuel gas Compressor RC10K -11/351 for power plant Wartsila

Key data: 9000 , 6000

9MW Wärtsilä W20V34GS Natural Gas Engine Generating Set. Hours: 17,450 Year: 2007 kW: 9000 HZ: 50 V: 6000 Fuel: Natural Gas Complete plant with: Engine, Alternator 750 RPM, Frame, Control System, Gas Line, 2 Radiators, 2 Cooling Towers, Synchronization Panels, Switchgear, Transformer 6,000V / 20,000V. Other accessories as in the photos. Service done at 16,000 hours. Available for Sale Now.

Engine Make SCANIA Engine Type Schnell 6R20.1B Power KW/RPM 265 / 1500 Fuel Gas Generator Model STAMFORD Volts 400 Hz 50 Year of Manufacturing 2014 GAS POWER HOLLAND 00316 38 63 90 71 (whatsapp)

Engine Make JENBACHER Engine Type JMS 616 GS-N LC Power KW 2433 RPM 1500 Fuel GAS Generator Model AVK Generator Power 3760 kVa Volts 10500 Hz 50 Year of Manufacturing 2008 Running Hours 48312 GAS POWER HOLLAND 00316 38 63 90 71 FULL MAINTENANCE HISTORY AVAILABLE

Engine Make Jenbacher Engine Type 620 Power KW/RPM 2801/1500 Fuel Natural-Gas Generator Model 400 Volts Hz 50 Year of Manufacturing 2001 Running Hours 75.000 GAS POWER HOLLAND 00316 38 63 90 71

Engine Make JENBACHER Engine Type JMS 420 GS – NL C Power KW 1412 Power Output 1451 RPM 1500 Fuel GAS Generator Model STAMFORD Volts 400 Hz 50 Year of Manufacturing 2005 Running Hours 36.000 GAS POWER HOLLAND 00316 38 63 90 71 whatsapp

Engine Make MWM Engine Type TCG 620 V16 K Power KW/RPM 1358 / 1500 Fuel Gas Volts 400 Hz 50 Year of Manufacturing 1997 GAS POWER HOLLAND 00316 38 63 90 71 whatsapp

Engine Make JENBACHER Engine Type JMS 420 GS -A 02 Power KW 1415 Power Output 1451 RPM 1500 Fuel GAS Generator Model Stamford Generator Power 1935 KVA Volts 690/400 Hz 50 Year of Manufacturing 2006 Running Hours 29158 GAS POWER HOLLAND 00316 38 63 90 71 whatsapp