129,257 used machines on RESALE, but how to find them? Machine Search
Water-cooled, welding current max. 345 amps see pictures Auction-ID: A7-44764-202
From operating resolution: Selco Genesis 352 GSM DC Device No.007410000118 with water cooling Welding range 6-350 amps 350Amps at 60%ED 270Amps at 100% ED 380 volts with 8meter burner AQ 18F with flexible head and ground cable Adjustable pulse function RF Ignition 2/4 stroke
Key data: 526 KW, 910 kVA, 400 V
Jenbacher JMS 312 GS-B.LC - Container Design Number: F866 Year of construction: 2009 Country: Switzerland Site Name: Aarberg Module number: 803588 Engine number: 6128071 Serial number: 323762 Engine type: 312 Engine version: C225 Gas type 1: Biogas Control System: Dia.ne XT Power Output: 544 kW Electrical Output: 526 kW Thermal output: 505 kW Alternator: NEWAGE Type: HCI 634 H2 Type Rating: 910kVA Voltage 400V Frequency: 50Hz Turbocharger: PBST Type: TCR12-42516 Actual OH: 126,000 Starts: 5543 Service: Equipment was serviced by IWK (authorized Service Partner of INNIO for Switzerland). At 60k OH the Longblock was exchanged, at 105k OH the Minor Overhaul (40k) was done. Till next Major Overhaul the engine has approx. 15k OH left.
From operating resolution: Pulse welding system Cebora EVO Speed Star 380 TC Specifications: Control Sound Digibox MIG P4 Welding range 10-380 amps 310Amps at 100% ED 4 Roller feed Water cooling TIG welding possible in the DC range Feed rollers 1.2mm Burner 4meter with 1.0mm wire, ground cable and pressure reducers-- Dimensions in mm approx. 950x850x1020 Operating instructions
Hours: 19960 hours. Spare filters available. Auction-ID: A1-41989-4
From operating resolution: Kjellberg TIG 321 AC/DC Year of construction 2013 Pulse function HF Ignition Water cooling Welding Range: 5-320Amp Gyg2uk 320Amps at 45% ED complete, with 4meter torch, ground cable and pressure reducer Dimensions in mm approx. 1100x510x810 --Very neat device-
For sale on "as is" basis Used Solar Gas Turbine Mars 100 SoLoNOx Natural Gas Location: Europe Year of manufacture: 2012 Output Power: 11,350 kWe Heat Rate: 10.935 kJ/kWe-hr (10.365 Btu/kWe-hr) Exhaust Flow: 153,245 kg/hr (337,950 lb/hr) Exhaust Temperature: 485 °C (905 °F) Frequency: 50 Hz Package hours: 27206 Gas turbine hours: 20547 Number of starts: 216 Housed on skid installed indoor with attenuating enclosure and fire detection and suppression system. Inlet System Barrier Filter and Silencer mounted on ancillary skid on the roof of the enclosure. Gear Reduction Box RENK MAAG GmbH. Type: GPF3-28, Output Speed/Freq. 50Hz - 1500rpm Generator Data: Electric Brushless AC Generator with Permanent Magnetic Alternator. Alternator data: 2.2kW. PF.9. 1 Phase. 240V/10A/120Hz. Gen Skid includes Lube oil tank, pumps, filters, start system with AC Direct Drive AC Motor, VFD, ...
Offered out of insolvency is a DC TIG welding machine EWM Tetrix 301 Activarc with Comfort T3.24 control Year of construction 2009 spotarc/ second pulse 2/4 stroke Water cooling Welding range 5-300Ampere 300Amps at 60% ED 250Amps at 100% ED Bzn9kovxtp 8meter hose package, with ground cable and pressure reducer
Agilent GC 6890N, Detector WLD Option: Extension with FID Injector: Split/Splitless with EPC LAN connection Agilent Chemstation B04.03
Key data: 220
MAN Lean Burn Biogas 2876 LE302 Containerised Generator. Model: MAN Lean Burn Biogas 2876 LE302 Capacity: 220 kW Hours: 0 Year: 2023 Fuel: Biogas V: 400 HZ: 50 Scope of supply: New MAN 2876 LE302 and ComAp Control Panel. Used Container, Alternator, Radiators and Gas line. MAN Engine comes with manufacturers warranty. Available for sale from Gas Engine Exchange. Please check our complete range of equipment at gasengineexchange.com.
1. PE 200 AAS, tipo a fiamma.(con schermo di controllo, potrebbe funzionare senza o con computer) 2. PE 400 AAS.(senza schermo di controllo) 3. PE 900Z, tipo grafite. Tutti in ottime condizioni e set completo di computer e accessori necessari.
Key data: 210 , 400
Tedom Cento 210 kW Biogas Container Generator Set Brand: TEDOM Package: CENTO 200 Engine model: TB 210 G5V TW 86 Fuel: Biogas Capacity: 210 kW Voltage: 400 Year: 2022 Hours: 1,000 Scope of supply: Full container with engine, alternator, frame, control panel, gas line, radiators, chimney etc. Additional info: In 2023 a new engine block was installed and the alternator was overhauled. (90k€ invoice). Original container and plant is from 2017. Available for sale from Gas Engine Exchange. Please check our complete range of equipment at gasengineexchange.com.
Key data: 210 , 400
Tedom TB210 G5V TW 86 Complete Containerised Biogas Unit. Make and model: Tedom TB210 G5V TW 86 Capacity: 210kW Hours: 51 Year: 2015 Fuel: Biogas V: 400 Hz: 50 Scope of supply: Complete Containerised Biogas Unit Including: Engine, Alternator (Leroy Somer), Control Panel (ComAp IntelVision8), Base Frame, Gas line, 2 x Radiators, 2 x Air Intake, Silencer, Piping, Biogas Treatment and Condensare discharge system, Carbon filter. All documentation and diagrams. Inspection notes: Liners in good condition. Engine turned over easily. Has been kept heated. Available for sale from Gas Engine Exchange. Please check our complete range of equipment at gasengineexchange.com.
Jenbacher 320 Stamford AC Generator Manufacturer: Jenbache Model: 320 Alternator Year of manufacturing: 2003 Rated Output Power: 1330 KVA Speed: 1500 RPM Voltage: 400 V Frequency: 50 Hz Phase: 3 Condition :Used Please see attached the pictures for the units available for sale. Kindly advise your interest if you would like to get further details feel free to contact us back. For arranging the visit inspection; and pricing information feel free to contact us at: Enquiries@ukpowergeneratorsltd.com 00447956518924
Jenbacher 320 Empty containers 2 UK Power Generators Ltd have in stock the container for the generators to be inserted and perform their energy production operations. Ideal for Jenbacher 320 generators Available for sale... The empty container with highly specialised flooring and walls considering the equipment to be installed in there. The container pictures are attached to this advert, as seen. Everything inside the empty container. Please write to us at Infoukpowergeneratorsltd for further information on arranging viewing or pricing details. ~ UK Power Generators Ltd Enquiries@ukpowergeneratorsltd.com 00447956518924
Agilent 7890A +5975C+7683(100 tray) with SSL + PTV inlet. And with pump. Agilent 7890A +5975C+7693(150 tray) with SSL + PTV inlet. And with pump. Both in very good condition.
Machine type: MIG/MAG welding machine Make Merkle Type ME 251 LK Appendix No. 7206 Connection voltage 3 x 400 volts Adjustment range 40 - 250 amps Duty cycle 35% ED at 250 amps 60% ED at 170 amps Current setting 8 switching levels Cooling transformer by built-in fan Cooling burner gas-cooled Design of mobile compact system Wire Feeder 2-Roller Drive Fuse 16 Ampere Dimensions L x W x H 815 x 440 x 680 mm Special accessories for point and interval equipment Weight 122 kg Age approx. 20 years Condition workshop tested, good incl. UVV test report Scope of supply welding system with the following accessories: 1 piece welding torch 3 mtr. long 1 piece ground cable 1 piece pressure reducer 1 roll of welding wire D-200 coil, 5 kg 1 can of non-stick spray 1 piece spare parts box, complete Adorned 1 pair of welding gloves 1 Pi ...
2015 Manufacture Date 0 hours since manufacture Stored continuously been stored indoors a temperature-controlled building since delivery (still crated) 7901S Taurus 60 (SoLoNOx) 5670/kWe Generator 13800 Volt 60 HZ (1800 RPM) 3 Phase No enclosure, open skid TURBOTRONICS PLC 4 with TT4000 Display FAT tested by Solar Turbines VFD start system Complete Air inlet filtration system Complete site (equipment) inspection performed by Solar 2019
Remote control for inert gas welding device, inert gas device, welding rectifier, hand controller -Manufacturer: Fronius, remote control RCU5000i Univ.SD -Art.No.: 4,046,098 -Voltage: U1 24 V -Dimensions: 180/260/H50 mm -Weight: 1.5 kg
Shock absorbers, gas pressure springs, shock absorbers, start-up dampers, impact absorbers -Piston: Ø 40 mm -Piston housing length: 377 mm -Piston rod: Ø 20 mm -Recording hole: Ø 14 mm -Dimensions: Ø 40 x 530 mm -Weight: 1.5 kg/piece
Offer 24191 Specifications: - Welding current max 250 A 30% ED - 180 A 60% ED - 140 A 100% ED - Welding current adjustable in 8 stages - 30 A / 15 V - 300 A / 30 V - 4 roller wire feeders infinitely adjustable - 2 stroke + 4 stroke regulation - Weld seam lengths - time setting - Hosepack air-cooled approx. 3 m - Ground cable -Reducer - Connection 400 V - Space requirement approx. W 550 x H 1090 x D 950 mm - Weight approx. 140 kg
Shock absorbers, gas pressure springs, shock absorbers, start-up dampers, impact absorbers -Piston: Ø 40 mm -Piston housing length: 377 mm -Piston rod: Ø 20 mm -Recording hole: Ø 14 mm -Price: per piece -Number: 3 pieces -Dimensions: Ø 40 x 530 mm -Weight: 1.5 kg/piece
Offer 24109 Specifications: - 4 spaces for 50L. bottles - Full-length bottle cage - Exhaust air opening - Closet is lockable , key is provided - Required space W 1400 x D 465 x H 2150 mm - Weight approx. 120 kg
Machine Type: TIG Inverter Welding Machine Water-cooled DC system Make Merkle Type TIG Insquare 350 W-DC Appendix No. 24.410 Connection voltage 3 x 400 volts Adjustment range 5 – 350 amps Duty cycle 60% ED at 350 amps 100% ED at 270 amps Current adjustment infinitely variable max. weldable material thickness steel / stainless steel = 10 mm Cooling inverter through built-in fan Cooling burner water-cooled Design of mobile industrial plant Fuse 16 Ampere Dimensions L x W x H 955 x 515 x 945 mm incl. bottle holder Weight 130 kg Age approx. 30 years Condition workshop tested, good incl. UVV test report Scope of supply welding system with the following accessories: 1 piece TIG torch SR 18 SC, 8 mtr. long 1 piece ground cable 1 piece pressure reducer 1 pair of TIG gloves 1 piece spare parts box complete Equipped 1 Piece Instruc ...
Air bellows, roller bellows, air cushions, spring-loaded brake -Gas bottle holder -for: 33.5/43.5 Lbs -Hole spacing: 115/75 mm -Weight: 3.2 kg
Shock absorber, gas spring, shock absorber -Shaft: Ø 35 mm -Shaft length: 28 mm -Bore: M8 -Quantity: 8 pieces available Price: per piece -Dimensions: 75/160 mm -Weight: 3.8 kg/piece
Key data: 2000 , 2500 , 400
Jenbacher J616 GS Year 1999 2000KW Rated Power (generator) 2160 KW / 2700 KVA STAMFORD 400Volt Natural Gas Scope: Engine & Alternator on frame Panel DIANE bleu Gas-line location Netherlands. generalpowerholland.nl +31681163153
Shock absorber, gas spring, shock absorber -Shaft: Ø 50 mm -Shaft length: 28 mm -Bore: M8 -Quantity: 5 pieces available Price: per piece -Dimensions: 95/170 mm -Weight: 6.6 kg/piece
Gas cylinder trolley, gas cylinder cart, steel cylinder cart -Transport trolley: galvanized version -Tires: pneumatic -Quantity: 1 piece available -External dimensions: 760/520/H1320 mm -Own weight: 19 kg
Gas bottle cart, gas bottle cart, steel bottle cart -Transport trolley: galvanized version -Tires: solid rubber -Number: 1 piece car available -Price: per piece -External dimensions: 730/520/H1325 mm -Own weight: 26 kg
Gas bottle cart, gas bottle cart, steel bottle cart -Transport trolley -Tires: PU tires puncture-proof 260x85mm -Number: 1 piece car available -Price: per piece -External dimensions: 730/500/H1150 mm -Own weight: 17.5 kg
TEDOM TB 130 G5V TX 86 Biogas Container Generator Set. Hrs: 0 Year: 2017 Capacity: 130,4 kW Voltage: 400 V Fuel: Biogas Scope of supply: Complete Containerised Biogas CHP Generator Set - Engine, Alternator, Base frame, Control panel, Gas line, Radiator, Exhaust gas heat exchanger, Chimney, Control system, Circuit breaker and Container. Service History : The machine has not been commissioned and has not been maintained since the installation. Available for sale from Gas Engine Exchange. Please check our complete range of equipment at gasengineexchange.com.
Gas and air filters, air filters -Manufacturer: Maxitrol -Type: GF65 MF-DN65 -Dimensions: 245/199/H190 mm -Weight: 4.5 kg
Inert gas welding device, inert gas device -Max. Welding power: 340 A. -4 roller drive -Water-cooled -Incl. Ground cable -with removable wire feeder -Hose package length: 4000 mm -Dimensions: 1100/515/H1170 mm -Weight: 214 kg
Immediately available used exhaust gas compensator
Immediately available overhauled gas-oil flow covers, also used ones we have all in stock
Machine type: MIG/MAG welding machine Make Lorch Type Saprom 905 Connection voltage 3 x 400 volts Adjustment range 25 - 400 amps Duty cycle 40% ED at 400 amps 60% ED at 350 amps Current adjustment infinitely variable Cooling inverter through built-in fan Cooling burner water-cooled Design of mobile industrial plant with separate DV case, Robot interface and 5 mtr. VB Cable Wire Feeder Gearbox 4-Roller Gearbox Fuse 32 Amps Dimensions L x W x H 900 x 420 x 1,235 mm Weight 123.5 kg Age approx. 15 years Condition workshop tested, very good, incl. UVV workshop test report Scope of supply welding system with the following accessories: 1 piece welding torch 3 mtr. long 1 piece ground cable 1 piece pressure reducer 1 piece spare parts box complete Equipped 1 Piece Instruction Manual Warranty: 6 months from the date of delivery Li ...
Sample gas cooler -Measuring gas cooler with: protective lining -Connection: 240 volts -Dimensions: 335/560/H390 mm -Weight: 32 kg
used
Dear Ladies and Gentlemen, We hereby offer the following exhaust gas heat exchanger from Enkotherm. Year of construction 2020 New and unused! Hours: 0 Details can be found in the pictures and PDF in the advertisement. Prior sale/errors/changes at any time reserved, EXW Beesten Price VHB! If you have any questions, please feel free to contact Sascha Neuwirth at any time Service for all aspects of the gas engine EPS BHKW GmbH Speller Straße 12 49832 Beesten Phone: +49 5905 945 82-0 Fax: +49 5905 945 82-11 Mail: info@eps-bhkw.de
Shock absorber, gas spring, shock absorber, start-up damper -Pipe: Ø 82 mm -Total length: 510 mm -Hole diameter: Ø 24 mm -Number: 2 shock absorbers available Price: per piece -Dimensions: 82/82/H510 mm -Weight: 11.5 kg/piece
maximum number of results exceeded
please refine your search
150 € 
