gas generatoren used for sale

Key data: 3000 KW, 1500 1/min

Jenbacher 620 Gas Genset Containerized Complete Package - TURNKEY solution to your tailored energy need. Containerized Jenbacher 620 with 2.7 MW unit is available for immediate sale. 2 x units with 2.7 mW is available for sale. Why to procure the Jenbacher from us? No Lead Time Units available straightaway Opportunity to move quickly Scope of supply includes: Fully Enclosed Containerized System: The entire system is pre-assembled and housed in a sturdy, weather-resistant container, making transportation and installation hassle-free. • Exhaust Silencers: Designed to keep noise levels low without compromising performance, making the system perfect for urban and noise-sensitive areas. • Table Cooler Radiators: These are included to help maintain optimal operating temperatures and enhance the lifespan of the generator. • Fuel System & Elec ...

The power plant, based on a 5 MW gas turbine CENTRAX 501 KB7 is complete with all needed equipment, allowing a steam output of 20 tons per hour at 20 bar. From ZERO hours until the last working day all maintenance was performed by Centrax under full maintenance contract.

Engine Make Jenbacher Engine Type 620 Power KW/RPM 2801/1500 Fuel Natural-Gas Generator Model 400 Volts Hz 50 Year of Manufacturing 2001 Running Hours 75.000 GAS POWER HOLLAND 00316 38 63 90 71

Forty two (42) Quality Used Cummins/Aggreko NCH20-QSK60G22, Dual Frequency 1875 kVA, 480v. 60 Hz. or 1875 kVA, 400v. 50 Hz. Natural gas generator sets. These 1875 kVA units are set for continuous an parallel to gird IPP applications. These units have less than 5000 hours of use since new. The generator is a gas engine driven alternator with control electronics, mounted on a bedplate and housed within a custom-built 20ft stackable container. The standard package is composed of the following: Alternator and engine assembly, Pressurized oil system, Automated control system, Instrumentation, Safety provisions, Engine cooler pack, Silencer, Gas lines including external Low Pressure Gas Train & internal Solenoid Valve The engine and alternator are integrally mounted. This assembly is isolated from the bedplate base by rubber isolation mounts. A 20ft containerised Gas Cooling Module (G ...

Engine Make MWM Engine Type TCG 620 V16 K Power KW/RPM 1358 / 1500 Fuel Gas Volts 400 Hz 50 Year of Manufacturing 1997 GAS POWER HOLLAND 00316 38 63 90 71 whatsapp

Subject: Pre-Owned Power Plant – Jenbacher JGC 312 GS-L Engine – 625 kW – Complete Equipment Dear Sir or Madam, We are pleased to offer for sale a complete power plant, fully operational and ready for use, comprising the following: 1. Engine Container 40 ft Jenbacher JGC 312 GS-L (Equip2 D4UN Masterpack NW12 H1) – nameplate year 2009 at 40.000 hour , overhauled in 2018 Power output: 625 kW Stamford alternator – continuous power 765 kVA Equipment included: DIA.NE TX control panels, silencer, heat exchanger, exhaust, control cabinet Roof fitted with a skid comprising: plate heat exchanger, flue gas heat exchanger, silencer 2. Electrical Container 40 ft Room equipped with electrical cabinets and a delivery substation Transformer 800 kVA – 20 kV / 400 V Roof-mounted air heater skid Price for the complete plant: €50,000 (ex-VAT), ex-wor ...

Engine Make JENBACHER Engine Type JMS 616 GS-N LC Power KW 2433 RPM 1500 Fuel GAS Generator Model AVK Generator Power 3760 kVa Volts 10500 Hz 50 Year of Manufacturing 2008 Running Hours 48312 GAS POWER HOLLAND 00316 38 63 90 71 FULL MAINTENANCE HISTORY AVAILABLE

Engine Make SCANIA Engine Type Schnell 6R20.1B Power KW/RPM 265 / 1500 Fuel Gas Generator Model STAMFORD Volts 400 Hz 50 Year of Manufacturing 2014 GAS POWER HOLLAND 00316 38 63 90 71 whatsapp

Natural Gas Power Plant 58.3 MW / 50 Hz Wartsila 6 × 20V34SG with Auxiliaries This power plant was originally built by Wärtsilä in 2011 as a turnkey project without heat recovery boilers. Later, the owner added 4 × 3.7 MW / 18 bar exhaust gas steam boilers with auxiliaries, which are available as optional items. The plant was in operation until 2017, accumulating approx 21000 operating hours per engine. All scheduled services were performed by Wärtsilä Service, including the 16,000-hour and 24,000-hour services, completed just prior to dismantling in 2021. This ensures that the gensets are fully maintained and do not require servicing before re-commissioning. After shutdown, all equipment—including cables, pipes, and OEM modules—was professionally dismantled, tested, packed for transportation, and placed in storage. Control cabinets are stored in a heated warehouse, wh ...

Engine Make JENBACHER Engine Type J 616 GS C02 Power KW 1942 KW RPM 1500 Fuel Natural Gas Generator Model Stamford Volts 690 Hz 50 Year of Manufacturing 1999 Running Hours 15.000 SHORT BLOCK BY JENBACHER GAS POWER HOLLAND 00316 38 63 90 71 whatsapp

Turbogas Turbine GE5/1 5MW Natural gas for sale. Complete turbogas turbine plant with electric generator, recovery boiler and exchangers, dry cooler, diverter. Total Hours: 36,000 8,000 hours from the last overhaul. THERMAL POWER 9,0 MWt Saturated steam production 13,000 kg/h at 10BARg Voltage 11000 V Frequency 50 hZ Also available: - GE5/1 used turbine in nitrogen storage with 72,000 hours + 8,000 Hours after the last overhaul + one used generator Price: €240,000. - NEW GE5 Turbine Spare Parts (value 1 million) Price : €320,000. Available for sale from Gas Engine Exchange . Please check our complete range of equipment at gasengineexchange.

Key data: 529 , 400

AVAILABLE FOR SALE! USED GAS GENEARATORS SET. MAKE: JENBACHER TYPE: J212 GSB 21 POWER RATING: 529 KW FUEL: NATURAL GAS YEAR:2002 HOURS: 43.000 ALTERNATOR: AVK - STAMFORD ,400V, 50HZ, 1500 RPM EXCELLENT CONDITION. Engine has been overhauled and upgraded with New control system SCOPE OF DELIVERY: ENGINE+ALTERNATOR CONTROL PANEL GAS STREET

Key data: 1560 KW, 4160 V

Introducing the MWM TCG 2020 V16K generator, a powerhouse of energy efficiency and reliability. Built in 2010, this generator is in pristine condition, unused and ready to deliver exceptional performance. With a rated power of 1418 kW and the ability to run on a variety of gases, including natural gas, biogas, mine gas, sewage, or landfill gas, it offers versatility like no other. Equipped with a Marelli Generators alternator, this generator boasts a power output of 1560 kW, operating at 4160 V with a speed of 1500 RPM and a frequency of 60 Hz. Weighing 16500 pounds, this robust machine is located in the USA and is competitively priced for your convenience. For more information on this top-tier MWM generator, contact us

Gas mixer from Honeywell for sale, incl. gas test certificate and original packaging.

Gas mixture regulator, Woodward 8442-1005 for sale, with original packaging

Complete Natural Gas power plant based on 2 x MWM 2032 V16 gensets with 4300 KW each, for a total of 8600 KW, with heat recovery boiler and heat exchangers.

Key data: 9 KW, 10 kVA, 13 V

SURPLUS Wartsila Power Plant, with two (2) – 9.38 Mw = 18.76 Mw – ISO - Wartsila Generator, W20V34SG Engine-Generator sets, 60 Hz, 13,.8 kV. DOM – 2018 – warranty expired – sold as is – where is - Condition. Surplus – Never used – Never Installed With balance of plant – Brief description below with prefabricated building W20V34SG Engine Generator set – open Generator set, Starting Air system + Starting Air Bottle, Maintenance Water Tank, Ventilation Inlet Air duct, LV Switchgear / MCC – Review SLD, Engine Control Panel – Start stop – Synchronization, Neutral Point Cubicle, Exhaust Gas Silencer, Charge Air Dry Filter, Cooling Radiators + Expansion Vessel, Exhaust Gas Module, Charge Air Filter Charge Air silencer, Exhaust Gas Branch pipe, Explosion relief valve, Exhaust Gas Silencer, Exhaust pipe ventilation fan, Flexible bellows, Oil mist separat ...

Gas-shielded welding machine with pulse function, MIG/MAG pulse welding system max. welding power: 330 A Remote control connection 4-roller drive Water-cooled with: detachable wire feeder incl. ground cable Gas fitting Dimensions: 655/900/H1495 mm Good condition.

Complete Natural Gas power plant based on a MWM 2032 V16 gensets with 4300 KW, with heat recovery boiler and heat exchangers.

SUMERA MOTOR SMG-100LG-S gas generator was built in 2018 in Poland by SUMERA MOTOR Sp. j. The machine, which is powered by natural gas, ensures uninterrupted operation of machinery and industrial systems in the event of power cuts or in conditions where electricity cannot be supplied. All components of the machine, including the 100 kVA motor, are located inside a soundproof enclosure that significantly reduces noise levels. The SMG 100LG-S generator weighs 1690 kg. Technical specifications of the SUMERA MOTOR SMG-100LG-S gas generator - fuel type: natural gas - rated power: 100 kVA (80 kW) - rated current: 144.6 A - rated voltage: 230/400 V - rated frequency: 50 Hz - rated power factor: 0.8 cosφ - performance level: G3 - degree of protection: IP 44 - maximum operating temperature: 40°C - weight of the SUMERA MOTOR machine: 1690 kg

Offer 23108 Specifications: - Welding current max. 550 A 60% ED - 420 A 100% ED - Welding current adjustable 50 A - 550 A - 3 coarse steps + 12 fine steps - Separate wire feeder case with between package 4 m - 4 roller wire feeders infinitely adjustable 0.5 - 24 m/min - 2 stroke + 4 stroke - regulation - water-cooled hose package approx. 4 rm - Ground cable -Reducer - Connection 400 V / 64 A - Space requirement approx. W 550 x H 1310 x D 1050 mm - Weight approx. 150 kg

core engine Centaur 50. The turbine and associated gearbox have been completely base overhauled after last operating and are a ready-to-install for a zero-hour turbine exchange. After the overhaul, there was no active operation / no installation. The turbine and gear box Sale Solar Centaur 50 Base overhauled core engine: Manufacturer Solar Turbines - Type CENTAUR 50 SoLoNox - Year of construction 2022 Zero-hour core turbine and gearbox - Electrical output 4,040 kWel - Speed 14,944 rpm 50Hz - Fuel Natural gas H - Design temperature 15° C - Turbine inlet temperature 665 °C (1.229 °F) - Gearbox with zero operating hours - Turbine control Solar TTS4

Emergency power gas turbine from 1977 with few running hours, without generator and controller. 1 available 456 KW x 1,500 1/min Manafacture: Garrett Model No.: ME831-800A Type: Gas turbine Serial Number: P-830005 Power [KW]: 456 Year of construction: 1977 Weight [kg]: 915 Dimensions LxWxH [cm]: 270x120x120

Tecnodom Master 150 Gastro refrigerated counter Description Refrigerated counter in a modern design. Ventilated version, equipped with hypothermia, lighting in the cove and an uncooled glass intermediate floor. Analogue temperature display and night cover in the form of plexiglass sliding windows. Very suitable for your cafeteria, sandwich shop, supermarket and any catering business. Includes sliding windows made of plastic With curved tilting window Including intermediate level Specifications Dimensions WxDxH: 1500x898x1243 Inside dimensions: 138x56x70 cm Connection value: 0.65 kW Connection voltage: 230V Temperature range degrees: +2 to +6 degrees More items - new and used - can be found in our shop! International shipping costs on request!

Key data: 155

Schnell CHP Biogas Container 160kW. Low hours biogas CHP. Equipped with a Liebherr L4R20.1BO Engine. 155kW electrical 154kW thermal Fuel: Biogas Year: 2016 Hours: 13000h Power: 155kW Voltage: 400V Frequency: 50Hz Scope of supply: fully equipped container (L12,2m W3,2m H3,1m) including engine, alternator, frame, control panel, gas ramp, heat exchanger, table cooler, chimney. Additional 100kW boiler. The engine is currently set to run at 100kW, but power can be increased to 155kW via a software update. Available for sale from Gas Engine Exchange . Please check our complete range of equipment at gasengineexchange.com.

Complete Waukesha CHP power plant Including: Generator set Heat recovery Silincer Exhaust pipe Pumps Pipes Oil system Gas line Sound proof housing Air in and outlet The complete installation is in good condition and directly available. GAS POWER HOLLAND 00316 38 63 90 71

Hitachi LaChrom L 7485 Fluorescence Detector Excitation 200-850 nm Emission 250-900 nm Autozero analytical flow cell

Key data: 800 KW, 1000 kVA, 400 V

NEW/Surplus MWN 3016 V 16, 800 kW, 400v. 50 Hz. CHP Enclosed Natural Gas Generator Set Rating: 800kW, Electric Power: 800kWe Power factor (cos. phi): 1.0, 400 Volts, 3Ph, 50Hz, 1500 Rpm Altitude: max 1100m a.s.l., Ambient temperature: +5 up to +53 degC Engine: MWM 3016 V 16, 16 cylinders in V, water cooled, turbo charged with intercooler Alternator: 800kW / 400V synchronous, 3 phases, brushless, self-exciting, self-regulating, air cross flow ventilated, protection mode IP23, engine flywheel and generator shaft coupled, engine and generator coupled over SAE flange and fixed to one unit, genset mounted with vibration dampers. Control unit MMC consisting of: Electronic speed regulation for the engine,  Cos. phi regulation for the engine, Complete engine monitoring and control, Complete generator monitoring, Display of all relevant data (voltage, frequency, power, temperatures, oil pr ...

Gasket welder (Ref. No. 160-2667) for window seals Welding width 40 mm 220 volts L x W x H: 250 x 300 x 100 mm Weight approx. 3 kg The machine is in good condition, ready for operation Subject to changes, errors and prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system+technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone: 0041 62 966 18 32 Fax 0041 62 966 21 12

FOR SALE – 2 x Jenbacher J320 GS B05 We offer two Jenbacher J320 gas engine units in excellent working condition: Power Output: 1,064 kW each Fuel Type: Natural Gas Speed: 1,500 RPM – 50 Hz Control System: DIANE XT4 Voltage: 400 V Alternator: STAMFORD Running Hours: approx. 53,000 hours each Maintenance: All maintenance performed by official Jenbacher service Available for immediate sale. Site visits available, including endoscopic inspection. More pictures and detailed technical information can be provided upon request. For further details or to schedule a visit, please contact: Cogeneración Técnica Energética ctenergetica.com +34 674945249

Agilent 1200 HPLC system consisting of: Agilent 1200 G 1312B SL binary HPLC pump (up to 600 bar) Agilent 1200 G 1315B Diode Array Detector Agilent 1200 G 1316 B TLC SL Colcom/column thermostat Agilent 1200 G 1379 Degasser Agilent 1200 G 1330 Thermostat for Autosampler Agilent 1200 G 1367D Autosampler Hip ALS SL + on request with Agilent Chemstation/Warranty

Agilent 5973N inert MSD with GC Agilent 6890 N Agilent 5973 N inert MSD with GC Agilent 6890 N Network Agilent 5973 inert MSD with EI and turbomolecular pump enhanced BOC Edwards Turbopump Agilent GC 6890 Network with Split/Splitless Injector/EPC Edwards Vacuum Pump 1.5 MSD Productivity Chemstation E02.02 on PC/Win 10 NIST on request Option: Agilent Liquid Sampler, CTC or Gerstel MPS2 Sampler currently serviced/with warranty Installation on request

Key data: 2800 KW

ANNOUNCEMENT – WAUKESHA 16V AT27GL ENGINES & KATO GENERATORS FOR SALE Available for sale: three Waukesha 16V AT27GL natural gas engines, plus three KATO 3606LVA generators and Aalborg AV-4 heat-recovery boilers. These units offer proven durability and efficiency, ideal for power generation and industrial applications. Waukesha 16V AT27GL Engines – Key Information Engine 1 – Serial C-94476/1 Hour Meter: 79,928 h Maintenance: 36K Plus at 52,000 h (2021) and 8K (2025) Pending: 72K Status: Operational Turbochargers: 12K service (2025) Engine 2 – Serial C-94534/1 Hour Meter: 84,152 h Maintenance: 8K (2025) Pending: 72K + main gas valve replacement Turbochargers: require 50K overhaul Status: Operational Engine 3 – Serial C-94476/2 Hour Meter: 67,122 h Maintenance: 72K at 66,000 h (2024) Pending: liner replacement + main gas v ...

Machine type: MIG/MAG welding system Make: Werner Type Wemag 300 K-1 Connection voltage 3 x 400 volts Setting range 40 - 300 amps Duty cycle 60 % d.c. at 300 amps 100% d.c. at 230 amps Current setting 21 switching levels Cooling transformer by built-in fan Cooling burner gas-cooled Design of mobile industrial plant Wire feed gearbox toothed 4-roller gearbox Fuse 32 amps Dimensions L x W x H 1100 x 420 x 720 mm Weight 135 kg Age: 32 Years Optional accessories 2-stroke / 4-stroke Condition workshop-tested, good, incl. UVV workshop test protocol Scope of delivery welding system with the following accessories: 1 piece welding torch, 3 mtr. long 1 piece ground cable 1 piece of pressure reducer argon with 2 pressure gauges 1 piece welding wire D-300, 5 kg 1 piece of welding gloves with cuff 1 piece spare parts box cpl. Equipped 1 piec ...

Key data: 2000 KW, 1500 1/min

Brand New Containerised MTU 16V4000L64FNER Natural Gas Generator Sets Brand new MTU 16V4000L64FNER containerised natural gas generator sets are available. This high-efficiency, low-emission MTU Series 4000 power modules deliver dependable performance for continuous, prime, or standby operation across industrial, commercial, and CHP (Combined Heat and Power) applications. Each unit is factory-assembled and tested in a 40ft ISO High Cube container, integrating the engine, alternator, cooling, ventilation, exhaust, and control systems—ensuring rapid installation and plug-and-play operation and can be delivered anywhere through road, sea or railway transportation. Key Specifications & Features Engine: MTU 16V4000L64FNER, 4-stroke, V16 lean-burn natural gas engine Power Output: Up to 2800 kVA Container Design: Weatherproof, sound-attenuated 40ft High Cube I ...

Key data: 1400 KW, 1800 kVA, 400 V

Gas generator set from 2004, Scope of delivery: Base frame and generator (defective), as shown with missing parts. 1 available 1,800 KWel x 1,500 rpm, 400 V/50 Hz. AC generator: Stamford HC I734G2 CG, 1,800 KVA Gas engine MWM TBG620-V16K Manufacturer: MWM Model No.: TBG620-V16K Type: Gas generator set Serial Number: 2205035 Power [KW]: 1.400 Year of construction: 2004 Hours:– Weight [kg]: 8.588 Dimensions LxWxH [cm]: 470×145 AC generator Stamford HC I734G2 CG Manafacture: Stamford Model: HC I734G2 CG Type: AC Synchronous Generator Serial Number: 00366141 Power [KVA]: 1,800 Voltage [V]: 400 Frequency [Hz]: 50 Current [A]: 2.598 Speed [1/min]: 1,500 Year of construction: 2004 Weight [kg]: 3.700

Key data: 1400 KW, 1800 kVA, 400 V

MWM Power Generator TBG620-V16K Gas generator set from 2004, Scope of delivery: as shown, generator defective with base frame. 1 available 1,800 KWel x 1,500 rpm, 400 V/50 Hz. AC generator: Stamford HC I734G2 CG, 1,800 KVA Gas engine MWM TBG620-V16K Manufacturer: MWM Model No.: TBG620-V16K Type: Gas generator set Serial Number: 2205165 Power [KW]: 1.400 Year of construction: 2004 Hours:– Weight [kg]: 8.588 Dimensions LxWxH [cm]: 470×145 AC generator Stamford HC I734G2 CG Manafacture: Stamford Model: HC I734G2 CG Type: AC Synchronous Generator Serial Number: 0132701/03 Power [KVA]: 1,800 Voltage [V]: 400 Frequency [Hz]: 50 Current [A]: 2.598 Speed [1/min]: 1,500 Year of construction: 2004 Weight [kg]: 3.700

Key data: 1400 KW, 1800 kVA, 400 V

Gas generator set from 2005, Scope of delivery: Base frame and generator, as shown with missing parts. 1 available 1,800 KWel x 1,500 rpm, 400 V/50 Hz. AC generator: Stamford HC I734G2 CG, 1,800 KVA Gas engine MWM TBG620-V16K Manufacturer: MWM Model No.: TBG620-V16K Type: Gas generator set Serial Number: 2205551 Power [KW]: 1.400 Year of construction: 2005 Hours:– Weight [kg]: 8.588 Dimensions LxWxH [cm]: 470×145 AC generator Stamford HC I734G2 CG Manafacture: Stamford Model: HC I734G2 CG Type: AC Synchronous Generator Serial Number: 00145797 Power [KVA]: 1,800 Voltage [V]: 400 Frequency [Hz]: 50 Current [A]: 2.598 Speed [1/min]: 1,500 Year of construction: 2005 Weight [kg]: 3.700

FOR SALE NEW- UNUSED WARTSILA COMPLETE EXHAUST GAS TURBO CHARGER . TO WHOM IT MAY CONCERN ; WE VE NEW UNUSED WARTSILA ST 6 COMPLETE EXH GAS TURBO CHARGER WITH ORIGINAL PACKAGE AT WOODEN BOX AT OUR STOCK . FOR YR GUIDENCE IT IS KBB HPR 6000 PLS REFER ATTACHED PICTURES. PLS FIND SPECT AT BELOW. TYPE ST 6 SPEC 7601068 n max 32900 mın t max 650 C Serial 00566 / 17 YOB. 2017 WEIGHT 466KG MADE IN THE EU EX OWNER SUPLIED FROM WARTSILA. TURBOCHARGER READY TO TRANSPORT. IF YOU ARE ANY FURTHER QUESTIONS PLS DO NOT HESITATE TO CONTACT WITH US . Capt. Ayhan Ugurluba With Kind Regards ; Aliaga Marine Services E-mail: info/aliagamarine.com Phn/Fax:+90 232 618 03 90 Mobile: +905556084850 aliagamarine.com TURKEY

Key data: 1344 KW, 1680 kVA, 400 V

Used CHP power plant, install in French hospital in Marseille Gas generator MWM DEUTZ Model TBG620V16K Power 1680 kVA year of manufacture 1996 Running hours 30.000 Natural gas supply with control panel Transformers 1600 kva Gas train Table cooler Heat exchanger Price 30.000 €

Key data: 1600 KW, 400 V

CHP Power Plant 800 kWe with 2 × MWM TCG 2016V08 Gas Gensets Combined Heat and Power (CHP) plant with 800 kWe / 400 V / 50 Hz output, designed to operate on natural gas or biogas. The plant was originally delivered by MWM in 2011 and remained in operation until 2021. It has low operating hours and is in good technical condition. Thermal energy is recovered as hot water at 90°C, currently utilized for district heating. Due to limited biogas availability, the plant typically ran at 30–40% load and not in continuous 24/7 operation. The facility includes a complete gas treatment and mixing system to handle landfill gas with a methane content of 40–55% CH₄. The power generators are housed in two soundproof containers, while the TEAM Evo MWM power plant control system, electrical switchgear, and control cabinets are installed in a separate control room. The heat recovery syste ...

Key data: 3240 KW, 3294 kVA, 10500 V

Electricity and heat generators from 1997 with 54,430 operating hours, complete with control and heat exchangers. 1 available 2,635 kWel x 1,000 rpm, 10,500 V/ 50 Hz. AC generator: ABB AMG 630 L6, 3,294 kVA CHP Wärtsilä W16V25SG Manafacture: Wärtsilä Model: W16V25SG Type: Gas-fired CHP Serial Number: 4099 Mechanical power [kW]: 3.140 Thermal power [kW]: 4.272 Power fired [kW]: 8.134 Exhaust gas temperature [°C] 420 Exhaust gas flow [kg/s]: 5.7 AC generator ABB AMG 630 L6 Manafacture: ABB Model: AMG 630 L6 Type: AC Synchronous Generator Serial number:– Power [kVA]: 3294 Voltage [V]: 10.500 Frequency [Hz]: 50 Current [A]: 181 Speed [1/min]: 1,000 Year of construction: 1997

Key data: 1548 KW, 1935 kVA, 11000 V

Jenbacher J420 GS-B25 Rated power: 1500 kw Year of manufacture: 2015 Frequency: 50hz Rated voltage: 10500v Performance class: G2 Hours aprox: 55.000 Diane XT4 control panel Stamford generator: 1548kw / 1935 kva 50hertz rpm 1500 Voltage 10.500 volt Scope: Engine Generator stamford Diane XT-4 Control panel Engine panel Gasline Battery located place: Netherlands generalpowerholland.nl +31681163153

1. EQUIPMENT OVERVIEW SIEMENS SGT-500 GAS TURBINES Quantity: Two (2) Units Available Condition: New Surplus / Zero Hours Manufacturing & Storage • Manufactured in 2007 • New surplus, never used • Zero operating hours • Stored strictly in accordance with OEM preservation procedures • Originally supplied for an FPSO project that was cancelled Certification • Marine Rated • DNV (Det Norske Veritas) certified 2. GAS TURBINE – TECHNICAL DATA • Model: Siemens SGT-500 • Configuration: Single-shaft industrial gas turbine • Fuel: Dual fuel – Natural Gas / Diesel • Frequency Capability: 50 / 60 Hz Power Output (ISO conditions – indicative) • Natural Gas: approx. 17.4 MW • Diesel: approx. 17.0 MW (Output may be slightly higher depending on site conditions) Performance • Specific Fuel Consumption • 221 g/kWh (Na ...

Recon Part Number: RMG 985B-200/100 Attention: We also have various other RECON parts from different manufacturers / types available. We will be happy to send you our current stock list. ---------------------------------------------------------------------- ----------- Sold only to commercial customers! ---------------------------------------------------------------------- ------------ If you have any further questions, please do not hesitate to contact us!