gas generator used for sale

Gas-shielded arc welding rod OERLIKON CARBOFIL 1 R EN 440 - G 46 2 M G3 Si 1 Material: 1,,5125 Diameter: Ø 1.2 mm Spool: Ø 500 mm Quantity: approx. 185 kg New 500 x 500 x 320 mm

Pressure regulator manually adjustable, pure gas regulator DRUVA Type: LMD-500-01 Inlet pressure: max. 50 bar outlet pressure: 0.5 - 6 bar stainless steel ! Dimensions: 125 x 115 x 50 mm

Pressure regulator manually adjustable, pure gas regulator DRÄGER TESCOM type: 44-3262-242H283 Inlet pressure: max. 35 bar outlet pressure: 0 - 35 bar stainless steel ! Dimensions: 135 x 135 x 70 mm

Pressure regulator manually adjustable, pure gas regulator DRÄGER TESCOM Type: 44-2260-242-010 Inlet pressure: max. 27 bar outlet pressure: 0 - 1.7 bar stainless steel ! Dimensions: 120 x 120 x 90 mm

Solenoid valve fuel gas MERTIK MV 10.2.4 Pn: 0.15 MPa (1.5 bar) nominal diameter: 10 mm (NW10) Screw connection: 1/2 Coil: 220 V AC 50 Hz IP55 New ! Dimensions: 100 x 90 x 80 mm

Sealing Gas Valve PFEIFFER VACUUM Type: PM Z01 313 A ( PMZ01313A ) 42806 Nominal diameter: 1/8 inch Gas flow: 147,5 - 20 sccm ( standard cubic centimeters ) inlet pressure: max. 1500 hPa ( 1.5 bar ) Power consumption: 4.0 W Control voltage: 24 V DC Material ( valve body ): Edelstahl New, with documents ! Dimensions ( valve ): 110 x 50 x 20 mm Dimensions ( packaging ): 180 x 120 x 50 mm

Sealing gas valve, vacuum valve PFEIFFER VACUUM Type: PM Z01 142 Nominal diameter: DN 16 KF ( 5/8 ) Material ( valve body ): Stainless steel New ! Dimensions: 75 x 35 x 35 mm

Hitachi LaChrom L 7485 Fluorescence Detector Excitation 200-850 nm Emission 250-900 nm Autozero analytical flow cell

Pressure regulator manually adjustable, pure gas regulator DRÄGER TESCOM Type: 44-2262-242-009 Inlet pressure: max. 27 bar outlet pressure: 0 - 7 bar stainless steel ! Dimensions: 120 x 120 x 60 mm

Pressure regulator manually adjustable, pure gas regulator DRÄGER TESCOM Type: 44-2261-242-010 Inlet pressure: max. 27 bar outlet pressure: 0 - 3.5 bar stainless steel ! Dimensions: 120 x 120 x 60 mm

Hot gas welder, multi-stage SCHLOMA ZIS-487/2 200 / 400 / 600 W 220 V AC approx. 2.8 m connection cable suitable air supply - see LU235 ! New ! Dimensions: 470 x 200 x 50 mm

Sealing, ring and plate cutting machine FRIPA Model: P125-1 Working range: Ø 30 - 300 mm Projection: 230 mm Working table: 320 x 420 mm Working height: 45 mm Distance Punch - Working table: max. 40 mm used, tested ! Dimensions: 540 x 320 x 440 mm

Gasket welder (Ref. No. 160-2667) for window seals Welding width 40 mm 220 volts L x W x H: 250 x 300 x 100 mm Weight approx. 3 kg The machine is in good condition, ready for operation Subject to changes, errors and prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system+technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone: 0041 62 966 18 32 Fax 0041 62 966 21 12

Gasket set SCHUNK 0370895 DSA PNG+125 8-piece New ! Dimensions ( packaging ): 120 x 70 x 10 mm

Gasket kit SCHUNK 0303451 DSA PZN+80 4-piece New ! Dimensions ( packaging ): 120 x 70 x 10 mm

Machine type: MIG/MAG welding system Make MERKLE Type RedMIG 2000 K Serial No. 81.838 Connection voltage 3 x 400 volts Setting range 25 – 200 amps Duty cycle 30 % d.c. at 200 amps 60% d.c. at 140 amps Current setting 7 switching levels Cooling transformer by built-in fan Cooling burner gas-cooled Portable compact system design Wire feeder 4-roller drive DV 26 Fuse 16 amps Dimensions L x W x H 800 x 460 x 655 mm Weight 70 kg Age approx. 12 years Condition workshop-tested, good, incl. UVV test protocol Scope of delivery welding system with the following accessories: 1 piece welding torch, 3 mtr. long 1 piece ground cable 1 piece of pressure reducer argon with 2 pressure gauges 1 roll of welding wire D-300 coil, 5 kg 1 can of non-stick spray 1 piece hand shield 1 piece protective glass 10 DIN 1 piece facing glass white 1 piece  ...

Agilent 1200 HPLC system consisting of: Agilent 1200 G 1312B SL binary HPLC pump (up to 600 bar) Agilent 1200 G 1315B Diode Array Detector Agilent 1200 G 1316 B TLC SL Colcom/column thermostat Agilent 1200 G 1379 Degasser Agilent 1200 G 1330 Thermostat for Autosampler Agilent 1200 G 1367D Autosampler Hip ALS SL + on request with Agilent Chemstation/Warranty

Agilent 5973N inert MSD with GC Agilent 6890 N Agilent 5973 N inert MSD with GC Agilent 6890 N Network Agilent 5973 inert MSD with EI and turbomolecular pump enhanced BOC Edwards Turbopump Agilent GC 6890 Network with Split/Splitless Injector/EPC Edwards Vacuum Pump 1.5 MSD Productivity Chemstation E02.02 on PC/Win 10 NIST on request Option: Agilent Liquid Sampler, CTC or Gerstel MPS2 Sampler currently serviced/with warranty Installation on request

Gasket kits SMC 13x MGP32-PS 2x MGP40-PS 4x MGP50-PS 2x CS95-50 for compact cylinders, MGP series and tie rod cylinders series C95/96 retail sale on request ! New ! Dimensions ( packaging ): 120 x 80 x 60 mm

Rubber-cork gasket, 10 pieces SCHUNK 9612791 PGN 160 Deckel Material: Rubber - Cork - Mixture Material thickness: 0.75 mm New ! Dimensions ( packaging ): 190 x 120 x 10 mm

Screw-in cylinder, with sealing kit, 3 pieces ROEMHELD, HILMA, STARK 1471-001 piston diameter: Ø 16 mm Rod diameter: Ø 10 mm stroke: 10 mm cylinder head reworked to hexagon with width across flats: 24 mm Seal kit: 0131471 Seal kit: New , 9 pieces used, tested ! Dimensions ( screw-in cylinder ): 60 x 28 x 28 mm Dimensions ( packaging ): 140 x 100 x 30 mm

Steam boiler Loos with Weißhaupt gas burner Type: U-ND 500 capacity: 500 kg steam/h Max. operating overpressure: 1 bar Test overpressure: 2 bar Water capacity full approx.: 770 l year of construction: 2003/2004 CE-marking: 0036 incl. hot water tank with condensate pump

Machine type: MIG/MAG welding system Make: Werner Type Wemag 300 K-1 Connection voltage 3 x 400 volts Setting range 40 - 300 amps Duty cycle 60 % d.c. at 300 amps 100% d.c. at 230 amps Current setting 21 switching levels Cooling transformer by built-in fan Cooling burner gas-cooled Design of mobile industrial plant Wire feed gearbox toothed 4-roller gearbox Fuse 32 amps Dimensions L x W x H 1100 x 420 x 720 mm Weight 135 kg Age: 32 Years Optional accessories 2-stroke / 4-stroke Condition workshop-tested, good, incl. UVV workshop test protocol Scope of delivery welding system with the following accessories: 1 piece welding torch, 3 mtr. long 1 piece ground cable 1 piece of pressure reducer argon with 2 pressure gauges 1 piece welding wire D-300, 5 kg 1 piece of welding gloves with cuff 1 piece spare parts box cpl. Equipped 1 piec ...

Recon Part Number: RMG 985B-200/100 Attention: We also have various other RECON parts from different manufacturers / types available. We will be happy to send you our current stock list. ---------------------------------------------------------------------- ----------- Sold only to commercial customers! ---------------------------------------------------------------------- ------------ If you have any further questions, please do not hesitate to contact us!

Recon Part Number: 1227 8128 Attention: We also have various other RECON parts from different manufacturers / types available. We will be happy to send you our current stock list. ---------------------------------------------------------------------- ----------- Sold only to commercial customers! ---------------------------------------------------------------------- ------------ If you have any further questions, please do not hesitate to contact us!

Machine type: MIG/MAG welding system Make Oerlikon Type Minicito 304 Connection voltage 3 x 400 Volt Adjustment range 35 – 300 amps Duty cycle 35% ED at 300 amps 60% ED at 230 amps 100% ED at 180 amps Current setting: 14 switching levels Cooling transformer by built-in fan Cooling burner gas-cooled Design of mobile compact system Wire feeder toothed 4-roller gearbox Fuse protection 16 amps Dimensions L x W x H 950 x 400 x 820 mm Weight 80 kg Age approx. 15 years Condition workshop-tested, good, incl. UVV test report Scope of delivery welding system with the following accessories: 1 piece welding torch 3 mtr. long 1 piece of ground cable 1 piece pressure reducer 1 roll of welding wire D-300 coil, 5 kg 1 can of non-stick spray 1 piece of hand shield 1 piece of protective glass 10 DIN 1 piece of glass attachment white 1 spare  ...

LORCH HR 918 REMOTE CONTROL LORCH HR 918 remote control As new. For details see Lorch With conversion kit to CAN bus (if this is not already on your machine) Price: €500 ex VAT

Capacity 1500 kw Gas type : Biogas With container Engines not used

Offer 22437 Specifications: - Welding current max. 450 A / 36 V 60% ED - 350 A / 32 V 100% ED - Welding current adjustable in 2x 18 switch levels 60 - 450 A - 2 bar + 4 bar – regulation, points, interval - 2 roll wire feeders, infinitely adjustable in separate - Wire feeder case CLOSS , CK 68 C - Intermediate package machine – wire feed approx. 6 m - Hose package water-cooled approx. 4 m - Ground cable -Reducer - Connection 400 V / 19 KVA - Space requirement approx. W 490 x H 1200 x D 1100 mm - Weight approx. 180 kg

For sale : 2 pcs. the complete TEM-EVO cabinets (w/CPU 1247 3959 KZ) 1 pc. Operating terminal BRT 1247 3955 KZ 2 pcs. I/O-Controller module CMPS 1247 0960 KZ 4 pcs. I/O-Controller module CM16DI 1247 0962 KZ 4 pcs. I/O-Controller module CM8DO 1247 0963 KZ 2 pcs. I/O-Controller module CM16DO 1247 0964 KZ 8 pcs. I/O-Controller module CM8DIO 1247 0965 KZ 14 pcs. I/O-Controller module CM2AI 1247 0966 KZ

Machine type: MIG/MAG welding system Make MERKLE Type OptiMIG 351 DW Plant no.: 129.187 Connection voltage 3 x 400 Volt Adjustment range 25 - 350 amps Duty cycle 60% ED at 350 amps 100% ED at 300 amps Current Adjustment 28 Switching Levels Cooling transformer by built-in fan Cooling burner water-cooled Design of mobile industrial plant with separate DV case Wire Feed Gearbox 4-Roller Gearbox DV 26 Fuse protection 32 amps Dimensions L x W x H 990 x 510 x 1,135 mm Weight 210 kg Optional Accessories Volt and Ampere Digital Display Automatic wiring Age 24 months Condition workshop-tested, like new, incl. UVV workshop test report Scope of delivery welding system with the following accessories: 1 piece welding torch 3 mtr. long 1 piece of ground cable 4 mtr. long, 70 sq mm 1 piece of pressure reducer argon with 2 pressure gauges 1  ...

We are also happy to send you videos of how it works. Shipping possible by arrangement for an extra charge. If you have any questions, just get in touch. PLEASE NOTE: This offer is non-binding and subject to availability. The indicated price is per piece, net, plus 19% VAT. free loading from DE-83395 Freilassing.

CAT G3516B YOM: 2006 Natural gas Power: 1085Kw Always maintenanced under CATERPILLIAR contract full service. Scope of supply: Complete package Genset Control panels Gas train Silincer Mufller Coolers Oil system

Machine type: MIG/MAG welding system Make MERKLE Type OptiMIG 351 DW Plant no.: 123.585 Connection voltage 3 x 400 Volt Adjustment range 25 - 350 amps Duty cycle 60% ED at 350 amps 100% ED at 300 amps Current Adjustment 28 Switching Levels Cooling transformer by built-in fan Cooling burner water-cooled Design of mobile industrial plant with separate DV case Wire Feed Gearbox 4-Roller Gearbox DV 26 Fuse protection 32 amps Dimensions L x W x H 990 x 510 x 1,135 mm Weight 210 kg Optional Accessories Volt and Ampere Digital Display Automatic wiring Age 4 years Condition workshop-tested, very good, incl. UVV workshop test report Scope of delivery welding system with the following accessories: 1 piece welding torch 3 mtr. long 1 piece of ground cable 4 mtr. long, 70 sq mm 1 piece of pressure reducer argon with 2 pressure gauges 1 p ...

Gasket set, exterior, 7 pieces ROEMHELD, HILMA, STARK 131531 for screw-in cylinders 1471-001 5 -piece other quantities on request ! New ! Dimensions (packaging): 180 x 140 x 20 mm

Machine Type: Pulse-Arc Inverter Welding Machine Make MERKLE Type HighPULSE touch 450 DW Plant no.: 125.127 Connection voltage 3 x 400 Volt Adjustment range 20 – 450 amps Duty cycle 60% ED at 450 amps 100% ED at 360 amps Infinitely variable current adjustment Cooling inverter by built-in fan Cooling burner water-cooled Design of mobile industrial plant with separate DV case and 1.6 mtr. long VB cable Wire feeder 4-roller drive DV 31, speedometer motor Fuse protection 32 amps Dimensions L x W x H 1,210 x 430 x 1,100 mm Weight 123 kg Age 3 years Condition workshop-tested, like new, incl. UVV test report Scope of delivery welding system with the following accessories: 1 piece welding torch SBT 504 W, 3 mtr. long 1 piece of ground cable 1 piece pressure reducer with 2 pressure gauges 1 roll of welding wire 0.8 mm, D-300, 5 ...

Inert gas welding device, inert gas device -Max. Welding power: 350 A. -2 roller drive -Air cooled -Incl. Ground cable -with removable wire feeder -Gas valve -Hose package: 2.8 m -Dimensions: 1100/640/H1090 mm -Weight: 190 kg

Inert gas welding device, inert gas device, welding rectifier -without wire feed -Max. Welding power: 350 A -Dimensions: 700/600/H1400 mm -Weight: 62 kg

Remote control for inert gas welding device, inert gas device, welding rectifier, hand controller -Remote control -Manufacturer: unknown -Type: Poti -Number: 1x controls available -Price: per piece -Dimensions: 155/105/H130 mm -Weight: 2.7 kg

Inert gas welding device, inert gas device -Max. Welding power: 320 A. -2 roller drive -Air cooled -Incl. Ground cable -with removable wire feeder -Gas valve -Hose package -Dimensions: 1000/500/H970 mm -Weight: 170 kg

Window rubber, cutting machine, gasket cutter -Stops: 2 -Dimensions: 2500/600/H1000 mm -Weight: 15 kg

Heating, burner, gas burner -Gas type: natural gas liquid -Gas connection: 20 mbar to 1000 mbar -Nominal heat output: 3590 kW -Blower motor: 5.5 kW -Weight: 160 kg

Inert gas welding machine -Max. Welding power: 400 A. -Four roll feed -Water-cooled -Hose package -with removable wire feeder -Incl. Ground cable -Gas valve

Inert gas welding device, arc welding system, MIG/MAG welding system -Scope of delivery: without wire feed unit with hose package, according to the pictures -Manufacturer: Ess, inert gas welding machine MIG-MAG 520 MW without wire feed -Type: 520-2MW -Max. Welding power: 500 A -Water-cooled -Dimensions: 1160/500/H810 mm -Weight: 303 kg

Shock absorber, gas spring, shock absorber, start-up absorber, impact absorber -Manufacturer: GSL (German Standard Lift), gas spring gas pressure spring 2 pieces -Type: 250N 11/14287251554/00101 -Piston: Ø 28 mm -Piston rod: Ø 14 mm, length 750 mm -Socket: M10 x 1.5 -Price/delivery: complete -Dimensions: Ø 28 x 1585 mm -Weight: 2.1 kg/pcs

Spiral wound gasket, labyrinth body gasket, flange gasket -Spiral seal: Flange seal according to DIN EN 12560-2 5 pieces/package -Type: 2 1/2 150lbs 1.4404/PTFE -Dimension: Ø124 x 2mm -Price: complete -Total weight: 0.7 kg

Spiral wound gasket, labyrinth body gasket, flange gasket -Spiral seal: Flange seal according to DIN EN 1514-2 -Type: DN65 PN40 1.4404/PTFE -Number: 4x seal available -Price per piece -Dimension: Ø127 x 4 mm -Weight: 0.1 kg/pc.

Spiral wound gasket, labyrinth body gasket, flange gasket, high pressure gasket -Manufacturer: Frenzelit, flat gasket Novatec Premium -External: O 126 mm -Inside: O 77 mm -Thickness: 2mm -Number: 51x seal available -Price per piece -Minimum purchase: 15 pieces -Weight: 0.03 kg/pc.

Spiral wound gasket, labyrinth body gasket, flange gasket, high pressure gasket -Manufacturer: Frenzelit, flat gasket Novatec Premium -External: O 162 mm -Inside: O 116 mm -Thickness: 2mm -Number: 107x seal available -Price per piece -Minimum purchase: 10 pieces -Weight: 0.05 kg/pc.

Solenoid valve, butterfly valve, flap valve, solenoid valve, solenoid valve, solenoid gas valve, gas solenoid valve, double gas valve, gas valve -Manufacturer: Siemens, double gas valve -Type: VGD40.040 -Connection: DN40 -Pmax .: 1000 mbar -Dimension: 235/170 / H195 mm -Weight: 6.9 kg