126,719 used machines on RESALE, but how to find them? Machine Search
We offer an MWM engine TCG 2032 V16 for sale. Specifications: Engine: MWM Type: TCG 2032 V16 Power: 3000 kW, (Actual power is 4000 kW, it has been reduced) Year of Make: 2009 Runninghours: 67,000 h
Remote control for inert gas welding device, inert gas device, welding rectifier, hand controller -Remote control -Manufacturer: unknown -Type: Poti -Number: 1x controls available -Price: per piece -Dimensions: 155/105/H130 mm -Weight: 2.7 kg
Solenoid valve, butterfly valve, flap valve, solenoid valve, solenoid valve, solenoid gas valve, gas solenoid valve, double gas valve, gas valve -Manufacturer: Siemens, double gas valve -Type: VGD40.065 -Connection: DN65 -Pmax .: 700 mbar -Dimensions: 285/190 / H210 mm -Weight: 8.3 kg
Solenoid valve, butterfly valve, flap valve, solenoid valve, solenoid valve, solenoid gas valve, gas solenoid valve, double gas valve, gas valve -Manufacturer: Siemens, double gas valve -Type: VGD40.040 -Connection: DN40 -Pmax .: 1000 mbar -Dimension: 235/170 / H195 mm -Weight: 6.9 kg
Machine type: MIG/MAG welding machine Make MERKLE Type ME 282 LK N Connection voltage 3 x 400 volts Adjustment range 40 – 280 amps Duty cycle 15% ED at 280 amps 60% ED at 200 amps Current setting 7 switching levels Point and interval setup Cooling transformer by built-in fan Cooling burner gas-cooled Design of mobile compact system Wire Feeder 2-Roller Drive Fuse 16 Ampere Dimensions L x W x H 885 x 375 x 590 mm Weight 80 kg Age approx. 25 years Condition workshop tested, good incl. UVV test report Scope of supply welding system with the following accessories: 1 piece welding torch SB 307 G, 3 mtr. long 1 piece ground cable permanently mounted 1 piece pressure reducer 1 roll of welding wire D 300, 5 kg 1 pair of welding gloves with cuff 1 piece spare parts box complete Equipped 1 can of ME 4000 non-stick spray 1 Piece ...
Spiral wound gasket, labyrinth body gasket, flange gasket, high pressure gasket -Manufacturer: Frenzelit, flat gasket Novatec Premium -External: O 162 mm -Inside: O 116 mm -Thickness: 2mm -Number: 107x seal available -Price per piece -Minimum purchase: 10 pieces -Weight: 0.05 kg/pc.
TO WHOM IT MAY CONCERN; WE VE 2 PCS USED REPORTED EXHAUST GAS TURBOCHARGERS ABB TPS 57 - D01 AT STOCK PLS FIND DETAILS ON BELOW TYPE TPL 57-D01 HT 466584 & 466585 N MAX 718 TMAX 650 nMAX 682 620 PLS FIND SERVICE REPORT ON FILES SECTIONS IF YOU VE ANY FURTHER QUESTIONS PLS DO NOT HESITATE TO CONTACT WITH US With Kind Regards ; Aliaga Marine Services E-mail: info/aliagamarine.com Phn/Fax:+90 232 618 03 85 Mobile: +905556084850 abc.aliagamarine.com TURKEY
Spiral wound gasket, labyrinth body gasket, flange gasket -Spiral seal: Flange seal according to DIN EN 12560-2 5 pieces/package -Type: 2 1/2 150lbs 1.4404/PTFE -Dimension: Ø124 x 2mm -Price: complete -Total weight: 0.7 kg
Machine type: MIG/MAG welding machine Make Merkle Type ME 202 LK Connection voltage 3 x 400 volts Adjustment range 30 – 200 amps Duty cycle 20% ED at 200 amps 60% ED at 120 amps Current setting 7 switching levels Cooling transformer by built-in fan Cooling burner gas-cooled Design of mobile compact system Wire feeder 2-roller drive Fuse 10 Ampere Dimensions L x W x H 780 x 360 x 590 mm Weight 62 kg Special accessories for point and interval equipment 2/4-stroke gearshift Age approx. 30 years Condition workshop tested very good incl. UVV test report Scope of supply welding system with the following accessories: 1 piece welding torch 3 mtr. long 1 piece ground cable 1 piece pressure reducer 1 roll of welding wire 0.8 mm Ø, D 300, 5kg 1 can of non-stick spray 1 piece spare parts box complete Equipped 1 Piece Instructi ...
INDUSTRIAL GAS TURBINE Brand: Rolls-Royce Model: 501-KB5s-DLE Maximum pressure: 1,205 PSI Condition: Pre-owned / Overhauled : Industrial Equipment Operational Period: 1999 - 2011 Total Running Hours: 39,500 hours Documentation: I am reviewing the documents and will send you the key details shortly
Inert gas welding machine, arc welding system, MIG/MAG welding system -Manufacturer: Ess, inert gas welding machine MIG-MAG 520-2 MW -Type: 520-2MW -Max. Welding power: 500 A -Water cooled -Wire feed case: ESS DVK 17 -Dimensions: 1160/500/H1220 mm -Weight: 379 kg
Inert gas welding machine, arc welding system, MIG/MAG welding system -Manufacturer: Ess, inert gas welding machine MIG-MAG type 310 MW -Max. Welding power: 310 A -Water cooled -Wire feeder: ESS PS 12-8 -Accessories: including hose package, ground cable -Dimensions: 1020/480/H910 mm -Weight: 208 kg
Heating, burner, gas burner, fan burner, gas fan burner -Manufacturer: Dreizler, fan burner type GE 200/300 AR 2 -Nominal heat output: 355 kW -Gas type: natural gas -Gas connection: 20 mbar -Blower motor: 0.37 kW -Dimension: 760/510/H535 mm -Weight: 33 kg
ring cutting machine, cutting device, cutting pliers, cutting machine, ring, disc, segment and strip cutting machine, ring cutting machine -Manufacturer: Klinger, ring cutting machine -Cutting range: 80 - 1250 mm -Cutting thickness: up to 9 mm -Dimensions total 1100/170/H280 mm -Weight: 6.4 kg
Plasma cutting machine, plasma cutter for plasma cutting system -Manufacturer: Hypertherm, gas console for plasma cutting machine -Type: 073239 from plasma cutting machine HT2000LHF -Dimensions: 295/175/H370 mm -Weight: 9.9 kg
Heat exchanger for inert gas welding machine, inert gas device, cooler -Manufacturer: CLOOS, heat exchanger from inert gas welding machine GLC 353 MC3 -Blower: ebm papst type M4Q0465-DA01-S8 -Dimensions: 330/160/H330 mm -Weight: 4.2 kg
gasoline engine, gas engine, drive engine -Manufacturer: Perkins, gas engine -Type: unfortunately without type designation -Engine power: -Dimensions: see photos -Transport dimensions: 800/670/H980 mm -Weight: 426 kg
Gas cylinder trolley, gas cylinder cart, steel cylinder cart -Tires: Air -External dimensions: 1000/750/H1200mm -Weight: 36 kg
Perkin Elmer Clarus 500 with autosampler and 2 x FID, currently serviced
Heating, burner, gas burner -Gas type: Natural gas (Liquefied petroleum) -Gas connection: 20 mbar to 1000 mbar -Nominal heat output: 3590 kW -Blower motor: 5.5 kW -Weight: 160 kg
hydraulic pump with gasoline engine -mobile hydraulic unit -Gasoline engine: JLO L152 -Power: 4.4 KW -Hydraulic pump: Hawe R6.0 -Performance: 4.3 L/min at 1450 rpm, pressure 350 bar
Welding machine, fully functional
Fully functional welding machine
Key data: 3048 KW, 1500 1/min
Engine with gas train, XT4 safi2 control panel, wihout generator ABB turbochargers, documentation
We are selling here a 616 V08-K ( MWM / Deutz ) turbocharger for landfill gas. Shipping: DHL, DHL Express, Freight Forwarder. Request international shipping. Customs fees may apply. English requests are gladly accepted at the international level. In addition, we offer spare parts for various engine manufacturers in the gas engine sector / biogas. The spare parts can be sent to you by express as quickly as possible. This minimizes downtime. Our dedicated sales team with decades of professional experience is at your side with advice and support. This also includes maintenance E40, E50, E60 and even an E70 for MWM engines. These maintenance can be carried out on site, except for one E70. Our mobile response team is active nationally and internationally. They bring the necessary tools and know-how with them. Draw on over 25 years of professional experience. With our modern ...
Turbocharger - AT for M.A.N. gas engines. 51.09100.9658. Refurbished. Shipping: DHL, DHL Express, Freight Forwarder. Request international shipping. Customs fees may apply. English requests are gladly accepted at the international level. In addition, we offer spare parts for various engine manufacturers in the gas engine sector / biogas. The spare parts can be sent to you by express as quickly as possible. This minimizes downtime. Our dedicated sales team with decades of professional experience is at your side with advice and support. This also includes maintenance E40, E50, E60 and even an E70 for MWM engines. These maintenance can be carried out on site, except for one E70. Our mobile response team is active nationally and internationally. They bring the necessary tools and know-how with them. Draw on over 25 years of professional experience. With our modern engine bogie ...
Volume: 2900kg/6400l, length: 6000mm, diameter: 1250mm, height: 1400mm, filling: liquid gas according to DIN 51622/EN589, max. filling level: 85%, test pressure: 22.3bar, max. permissible pressure: 15.6bar, permissible temperature min./max.: +20°C/40°C, storage: above ground. Including foundation plates (2400mm/1200mm/120mm) and steel frame. Documentation available. On-site inspection is possible.
With LED light and key Auction-ID: A1-45973-32
GAS BOILER 16MT Design pressure:18 Max working pressure:17 Test pressure:23.4 Operating water volume 25,400 Design code:TRD Manufacturing date:2013 Commercial: Mainie Harun (mainie@topglove.com.my) Noor Syaida (noor_syaida@topglove.com.my) Technical: Muhd Syahir (mhd_syahir@topglove.com.my) Nik Faris (nik_faris@topglove.com.my) Incoterm: EX WORK Currency: USD
2 x stainless steel gastro containers LxWxH: 53x32x10 Total price
Stock number: F653, Cup filling/closing machine, stainless steel,, Gasti type Doga Therm 41S., Theoretical capacity 2500-4000 units/h., Cup magazine., 2 filling nozzles, 50-550 cm3 piston dosing,, from product container with double jacket., 2 x 2 lid magazine with pressure station., cassette conveyor with 2 formats,, Ø 80 mm og Ø 91 mm., Material: Stainless steel AISI 304
109 litre, Stock number: D935, Litre: 109, In stock: Yes, Amount in stock: 1 pc., Item: Gas Incubator, Inner dimensions: W 425 x H 520 x D 500 mm., Temperature: 0-55º C, Power: 0,6 kW - 230 Volt, Shelf: 3 pcs., Manufacturer: Heraeus, Model/type: BB 16 CU, Other: Double glass door and inside copper cladding.
maximum number of results exceeded
please refine your search
100 € 
