127,695 used machines on RESALE, but how to find them? Machine Search
Temperature sensor, duct temperature sensor, screw-in temperature sensor, temperature sensor -Temperature sensor: screw-in temperature sensor -Measuring range: 0 to 300°C -Accuracy class: KL.1 -Measuring probe: Screw-in length 200 mm -Transport dimension: 330/260/H140 mm -Weight: 1.3 kg
Temperature sensor, duct temperature sensor, screw-in temperature sensor, temperature sensor, thermometer -Temperature sensor: screw-in temperature sensor -Measuring range: 0 to 160°C -Measurement probe: Screw-in length approx. 200 mm -Transport dimension: Ø100 x 240 mm -Weight: 0.4 kg
Temperature controller, temperature sensor, setting for temperature, signal converter, temperature converter, temperature limiter, electronic temperature controller -Manufacturer: Jumo, temperature controller type GROw-48/2a -Temperature range: °C -Dimensions cardboard: 210/150/H90 mm -Weight: 0.8 kg
Temperature controller, temperature control unit, temperature regulator, modular temperature control unit, tool heater -Manufacturer: PSG, temperature control unit for tool heating with up to 8 control zones -Type: RSD II 8 -P max: 21 kW -Dimensions: 490/400/H490 mm -Weight: 30 kg
Temperature controller, temperature control device, temperature control device, modular temperature control device, tool heater -Manufacturer: PSG, temperature control device for tool heating up to 8 control zones -Type: RSD II 8 -P max: 28 kW -Transport dimensions: 490/430/H460 mm -Weight: 30 kg
Key data: 100 °C, 8 kW, 30 W
HB-Therm HB-100Z1 temperature control unit with water medium for a maximum temperature of 100 °C. Heating 8 kW, cooling 30 kW, pump 1 kW, 60 l/min, 60 m. In good condition, ready for use. Please also note our large selection of other used plastic processing machines. All our machines can be viewed on site via video and tested in person.
Connected load: 4.55kW, cooling capacity: 9kW, circulation medium temperature: 30°C, refrigerant: R 134a, filling weight: 2.13kg, max. operating overpressure: 21bar, compressor volume flow: 11.46m³/h, compressor speed: 2900rpm, compressor discharge pressure: 22.6bar. Documentation available. On-site inspection is possible. The appliance was only used for a few hours for test purposes.
A heat treatment facility (2-chamber bogie hearth furnace) consisting of two furnaces is available. 1) Chamber furnace Bättenhausen Wärmetechnik GmbH, year of construction: 1991. 2) Chamber furnace LIO Poland, year of construction: 2008. Chamber dimensions X/Y/Z: 2x900mm/4300mm/1100mm, fuel: natural gas, temperature range: 350°C-1100°C, burners: 2x18, max. product dimensions X/Y/Z: 8800mm/3100mm/250mm, max. product weight: 18t. Process: Normalizing, tempering, soft annealing, austenitizing, hardening. Including a chimney, height: 38m. The plant is partly scrapped. Documentation available. On-site inspection is possible.
Process controller, controller, temperature controller, temperature sensor, temperature setting -Type: HROt-48/k,ap -Setting value: from 0 to 1200 C NiCr-NiK -5 A, 230 VAC-ohm load -AC 48..63 Hz, 230 V 4 VA -Price: per piece -Quantity: 6x Available -Weight: 0.5 kg
Process controller, controller, temperature controller, temperature sensor, setting for temperature -Type: HROt-48/k,ap,os -Setting value: from 0 to 1200 C NiCr-NiK -5 A, 230 VAC-ohm load -AC 48..63 Hz, 230 V 4 VA -Price: per piece -Number: 4x available -Weight: 0.5 kg
Process controller, controller, temperature controller, temperature sensor, temperature setting -Type: SR71-8Y1-1C Price: per piece -Quantity: 7x Available -Weight: 0.3 kg
Process controller, controller, temperature controller, temperature sensor, temperature setting -Type: Sigmagyr RVP210.1 -Weight: 0.8 kg
Temperature controller, temperature sensor, temperature setting -Type: 237.0120-035 Price: per piece -Number: 28 available -Weight: 0.5 kg
Temperature control unit 1 container 21 liters + 2 containers 9 liters Tabletop model TG 2-3 T electronic temperature controller Stainless steel Dry heating Connection 230 V, 1600 Watt Dimensions : 575 x 825 x 220 mm, WxDxH We have other temperature control units in stock for you!
good driving car roof not working Auction-ID: A1-42013-187
Nabertherm High Temperature Furnace 1600 °C The high-temperature furnaces HT 04/16 - HT 450/18 have proven themselves for many years in the laboratory and for production. Whether for quartz glass, glass-ceramics, the sintering of CIM components or other processes up to With a maximum temperature of 1800 °C, these furnaces represent the optimal solution for the sintering process. Thanks to their solid construction in a compact free-standing model, these high-temperature furnaces are suitable for processes in the laboratory where maximum precision is required. Excellent temperature uniformity and sensible details set unsurpassable quality standards. Tmax 1600 °C Double-walled housing construction with fan cooling, resulting in low outer wall temperature Heating from both sides via molybdenum disilicide heating elements High-quality fibre insulation with special rear i ...
TAMGLASS HTF Super-2436-CT-10 Glass tempering Furnace Producer TAMGLASS YOM 2005 2020 is refurbished by GLASTON, new hardware and new software. In production until end of 2021 Operating hours 49,700 h Machine number: HTF Super 0424 Glass dimensions - 2400 x 3600 mm Glass thickness 4-19 mm (glasses with thickness 10 and 12 mm and size up to 3800 mm can be tempered as well). Productivity at normal operation in 7 hours: - 5 cycles/hour (10 mm glass). - 6.25 cycles/hour (10 mm glass), etc. Set of spare parts is included.
Key data: 160 °C, 20 kW
Temperature control unit of the tools - Single STW 180/1-18-70-N1.1 (2 pcs.) Year of Make: 2013 Location: Lodz, Poland Description: Max. heating capacity - 160°C Heat transfer medium – water Power: 20 kW Device has: - a vacuum pump - a vacuum chamber - a function to suck medium out of tools - The device can be integrated with the machine, unattended All offered devices are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected device or to participate in live technical tests at our company in Łódź. Price: On request
Key data: 90 °C, 10 kW
Temperature control unit for tools - Wittmann Basic-C90 Year of Make: 2015 Location: Lodz, Poland Description: Max. heating capacity - 90°C Heat transfer medium – water Power: 10 kW Device has: - a vacuum pump - a vacuum chamber - a function to suck medium out of tools - The device can be integrated with the machine, unattended All offered devices are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected device or to participate in live technical tests at our company in Łódź. Price: On request
Universal temperature control unit WEINREICH type WTD 4Temperature control unit with electric heating and connections for external coolingFabr. No.: 11932217 year of construction 1993Temperature max. 140CBorcing pressure max. 6 barPump capacity 30 l/min. Tank volume 4 litresHeating capacity 4 kWeergisation capacity heat exchanger 15 kWCotor capacity of the pump 0.37 kWUmrune water supply + return G 3/8Cooling water flow + return G 3/8Total capacity 4.4 kWNe-connection 380 volts, 50 Hz, CEE plug-in temperature control medium water
Tempering Furnace ARTUR NOLZEN Type TL30/30/50Convection Oven, Convection Oven, Heating OvenFabr. No. 14785 Year of construction 1996Temperature range max. 750C Internal dimensions 300 x 300 x 480 mmInner width at the center bar 260 mmConnected load 6 kWnet connection 400 Volt, 50 Hz- Temperature control NOLZEN Type TRO t - 96 1a.re4- Time control THEBEN, Type TR 635 top- Heating time to 750 C in approx. 95 min. Required space L x W x H 1300 x 1100 x 1400 mmWeight 310 kgGood condition; used
2015, Crack in screen but functional, machines are put away working and have had inspection annually
2015, machines have been put away working and have had annual inspections
2015, machines have been put away working and have had annual inspections
2017, machines have been put away working and have had annual inspections
2015, machines have been put away working and have had annual inspections
2011, machines have been put away in working order and have had annual inspections
JKV Hermes JKV30 chocolate tempering machine Stainless, chocolate tempering moulding machine with vibratory table, adjustable temperature controls, mobile, 3 in stock, 1PH
Type: OptiDipper 650 Serial number: 87 Year of construction: 2013 Belt width: 650 mm Product height: max 50 mm Filling: min 40 L Infeed conveyor length: 600 mm Outfeed conveyor length: 950 mm Power: 3 x 400V, 50Hz, 1.8kW Dimensions: 3850 x 1400 x 1350 mm Weight: 850 kg
Key data: 160 °C
Description 1pc 800.--2 pieces 1.500.-- +VAT.HB Therm HB 160U1 max-160°C 8 KW ,year 2000 from resolution plastic production of medical device manufacturer ,operating instructions in the device in special compartment R1329 and R1330our identification no. Display protected by fold-away film Viewing by e-mail appointment is desirable Sale only to traders and under the following conditions The machine is considered to have been taken over when it leaves the company, subsequent complaints cannot be taken into account So no guarantee and return.We do not assume any liability for compliance with all requirements mentioned in the UVV (accident prevention regulations)
TEMPERATURE TRANSMITTER TA2532/EVT004
Temperature transmitter Process connection: G½ with sealing cone Installation length EL: 50 mm Suitable for direct installation Analogue output Measuring range: -50...200 °C Measuring element: 1 x Pt 1000, to DIN EN 60751, class A Factory setting: 0...200 °C
Used sharpener from Gami company type T400ES. New 2015. Pencil sharpener with a mesh for coating products with chocolate. The set also includes a vibrating table for pralines and a funnel for coating cookies with icing.
Type: TD600 Belt width: 600 mm Power: 3 x 380V, 50Hz, 0.5kW Dimensions: 2500 x 800 x 1450 mm Weight: 200 kg
Key data: 95 °C, 12 kW, 45 W
This temperature control unit is in good condition inside and out. Thanks to the powerful pump and the many outlets, it can supply several water circuits. Make an offer. Please also see my other advertisements.
BALZERS LTE 020 – Thermally controlled sample preparation station ✔ Use in: Coating technology, semiconductor processing, surface analysis, electron microscopy/ • Digital display unit with 4 channels (B1-B4) • Temperature display in °C • Adjustable via SET / UP / DOWN • Separate control for mains & lamp • Power supply: 220 V Hint: For detailed technical data and processing instructions, we strongly recommend consulting the original data sheets or contacting the manufacturer directly. More items - new and used - can be found in our shop! International shipping costs on request!
Agitator tank, make Schwarte - Milfor, year 2015, unused, for oil and other liquids,, stands on load cells,, Content: 1,000 liters, Inside diameter: 1,000 mm,, cyl. height: 1,250 mm,, outlet height: 500 mm,, single-walled/uninsulated on the top floor,, double-walled / insulated on the cylindrical shell and underbody,, with pressure-resistant heating/cooling system, Jacket space: 30 liters,, Permissible operating temperature: up to max. 85°C.
Equipment: Spacious interior with stainless steel shelves and doors for optimal sample organization Strong insulation for constant temperature even in the event of a power failure Digital control element with temperature display RS232 interface for external monitoring and data acquisition Robust castors for easy transport Condition: Used, functional With slight signs of wear (see pictures) Interior clean and fully equipped
Temperature control unit Jufeba TG 1-2 T Tabletop Model: TG 1-2 T Stainless steel Simple & robust technology Manual temperature control only DGUV V3 tested by us Connection 230V Approx. dimensions: 380 x 720 x 220 mm, WxDxH Used device cleaned with warranty + spare parts service Option: Maintenance contract Stainless Steel GM Tank E-Box Delivery Instruction & Commissioning
Manufacturer: Single Temperiertechnik GmbH Model No.: Advanced Oil D2-180-18-0 Year of Make: 2016 Heating capacity: 18 kW Specific heating capacity: 23.2 kVA Rated current: 32 A Supply Voltage: 3×400V/N/PE Frequency: 50 Hz Max. temperature: 180 °C Max. operating pressure: 3.1 bar Safety valve: 6.0 bar Medium: Heat transfer oil External capacity max.: 22 litres Net weight: 169 kg Device dimensions: Standard design (according to device type) Application: Temperature control for industrial processes, tools, plant modules Location: Schierling
Arburg 120.529 SN 2.5275G temperaturecards Multronica Spritzgiessmaschine Ersatz Hersteller: Arburg Teilenummer: SN 2.5275G Type: 120.529 Anwendung: Ersatzteil für Arburg Spritzgussmaschinen Zustand: gebraucht, geprüft, voll funktionsfähig Referenznummer: 11000323
Arburg 14326-Z SN 158.058 Temperaturecard (18) Dialogica Spritzgiessmaschine Hersteller: Arburg Teilenummer: SN 158.058 / SN 158058 Type: 14326-Z Anwendung: Ersatzteil für Arburg Spritzgussmaschinen Zustand: gebraucht, geprüft, voll funktionsfähig Referenznummer: 11082523
maximum number of results exceeded
please refine your search
1.000 € 
