gas generator set used for sale

Diesel Generators 1600 kWe / 50Hz with CAT 3516B engines and local control panel We have multiple identical CAT 3516B skid-mounted diesel generating sets available, all manufactured in 2018 and installed in the same HFO power plant, complete with full HFO plant auxiliaries. Each engine is coupled to a 2000 kVA / 415 V / 50 Hz brushless synchronous alternator via a flexible coupling, both mounted on a rigid base frame. These units are optimized for low emissions, high efficiency, and continuous base load operation. The generators have been serviced exclusively by the local CAT dealer and have only 1,500–2,000 operating hours. The standard scope of supply includes: • Engine control panel (EMCP 4) • 24V electric starting system • Radiator cooler Balance of Plant (BOP) equipment is available for customers requiring multiple units. Technical data Engine type CAT  ...

Key data: 53500 KW, 11000 V

Diesel Power Plant Wartsila 50 MW with 6 x 20V32 HFO Generator Set The diesel power plant has a total installed capacity of 53.5 MW and comprises six identical Wartsila 20V32 generator sets, each rated at 8.9 MWe (50 Hz). The generating sets are equipped with asynchronous AKV alternators and are designed to operate on heavy fuel oil (HFO). All necessary auxiliary systems are included. Each engine operates at 750 rpm and is turbocharged with intercooling. The engines are mounted on base frames that also function as wet oil sumps. The generator sets have accumulated approximately 35,000 total operating hours and have been maintained in accordance with Wartsila’s service guidelines. Maintenance has been performed by Wartsila Service and a certified service provider specializing in Wartsila engines. Engine cooling is provided by a radiator-based cooling system with two separate co ...

Key data: 800 KW, 400 V

CATERPILLAR GENERATOR SET Model TCG3016 V16 – 800 kW Year 2021 – 13,000 Operating Hours – Containerized Unit We offer a CATERPILLAR TCG3016 V16 generator set with an electrical output of 800 kW. The unit is containerized and ready for industrial, energy production, or cogeneration applications. Main specifications: Electrical power output: 800 kW Voltage: 400 V Frequency: 50 Hz Maximum current: 1600 A Short-circuit current: 65 kA Protection rating: IP54 Year of manufacture: 2021 Operating hours: 13,000 h Configuration: CATERPILLAR TCG3016 V16 gas engine Industrial 400 V alternator Control and power cabinet Fully integrated containerized unit for easy transport and installation Condition: Unit in working condition Immediately available Inspection possible upon request

; Power [PS]: 680; Gross weight [kg]: 14240; Engine: Battery System: LIFePO4; Accessories: Tanker, Control Panel, Wiring port: L1, L2, L3, N, PE, Power Input: , - AC socket: 3P/5W, 1x500kW, 5x16kW , - AC copper: 3P/4W, 500kW , - DC socket: 110kW, Power Output: , - AC socket: 3P/5W, 1x500kW , - AC socket: 1P, 1x16A; 3P, 1x32A , - AC copper: 3P/4

; Power [PS]: 98; Gross weight [kg]: 3000; Engine: Battery System: LIFePO4; Accessories: Battery, Control Panel, Power connection Input:, - AC socket: 3P/5W, 1x60kW, 1x30kW, - AC copper: 3P/4W, 60kW, - DC socket: 60kW, Power connection Output:, - AC socket: 3P/5W, 1x60kW, - AC socket: 1P, 1x16A; 3P, 1x32A, - AC copper: 3P/4W, 60kW

; Power [PS]: 544; Gross weight [kg]: 12000; Engine: Battery System: LIFePO4; Accessories: Tanker, Control Panel, Wiring port: L1, L2, L3, N, PE, Power Input:, - AC socket: 3P/5W, 1x400kW, 4x20kW, - AC copper: 3P/4W, 400kW, - DC socket: 110kW, Power Output:, - AC socket: 3P/5W, 1x400kW, - AC socket: 1P, 1x16A; 3P, 1x32A, - AC copper: 3P/4W, 400

; Power [PS]: 170; Gross weight [kg]: 3701; Engine: Battery System: LIFePO4; Accessories: Tanker, Control Panel, Wiring port: L1, L2, L3, N, PE, Power Input:, - AC socket: 3P/5W, 1x100kW, 1x30kW, - AC copper: 3P/4W, 100kW, - DC socket: 60kW, Power Output:, - AC socket: 3P/5W, 1x100kW, - AC socket: 1P, 1x16A; 3P, 1x32A, - AC copper: 3P/4W, 100k

Over 80 years experience in maintenance., Expert that jointly reflects on the ideal solution for your situation., 1,000 hours or one-year guarantee: optimal reliability., Available 24/7., Quickservice., We can always supply a replacement generator., Wide range of stock that can be supplied immediately.; Transport weight [kg]: 1656; Gross weight [kg]: 1656; Engine: NEF45SM3; Accessories: Product features:, Drip-tray, Start battery, Exhaust system; Water Tank Volume [l]: 390

Key data: 1800 KW, 2240 kVA, 415 V

Diesel Generator 5 x CAT 3516B 2000 kVA / 50 Hz – 2023 Never Installed Never installed, surplus CAT 3516B skid mounted diesel generating sets. Engine is coupled with 2000 kVA / 415 V / 50 Hz Leroy Sommer DSG 74L1 brushless synchronous alternator with a flexible coupling, and both mounted on a rigid base frame. These units are designed for standby and prime duty. Main engine control panel EMCP, 24V electric starting system. Technical data Engine type CAT 3516B – 16-cylinder, 1500 rpm diesel engine Alternator Leroy Sommer 2000 kVA / 415V / 50Hz Power factor 0.8 Manufacturing year 2023 Operating hours Zero, never installed Number of units available 5 pcs Prime rating 2000 kVA (1600 kW) Stand by rating 2240 kVA (1800 kW) Control system EMCP 4.2

Key data: 4000 KW, 11000 V

Diesel Generator Niigata 4 MWe / 50 Hz HFO Never Installed Never used medium speed Niigata HFO / Diesel fuel generator with Nishibhiba made air cooled 11 kV synchronous alternator with auxiliaries. All equipment was manufactured in year 2017 and they were never installed. Engine can run with normal diesel fuel of 180 cSt heavy fuel oil. Engine has two intercooled turbo chargers, on built lubrication fuel filter and engine driven cooling and lubrication pumps. Auxiliaries includes control panel, fuel booster unit for 180 cSt HFO, fuel oil filter, tools and spares. Delivery don’t include synchronization module and neither 11 kV breaker switch. Engine and alternator will be bolted on to a concrete foundation. Techncial characteristics Manufacturer Niigata, Japan Engine type 12V28 AHX Manufacturing year 2017 Operating hours since new Zero (only FAT) Electric ouput 4000 kWe ...

diesel power generator Brand: Ford power: 8,125 kVA Engine: 498 cc diesel engine Starting: Electric starter motor Sockets: 1 x 400 volts (CEE 3P+N+E) 1 x 230 volt (CEE 2P+E) 1 x 230 volts (CEE 7/3 – Schuko) Protection: circuit breaker and emergency stop Housing: Soundproofing housing Display: LED Display Keys: 2 keys Weight: 165 kg Degree of protection: IP44 Condition: unused, in the original packaging Auction-ID: A3-43525-541

Auction-ID: A1-40418-9

Frequency: 50 Hz; Rated power: 6.0 kVA/7.5 kVA; Max. power 6.3 kVA/8.125 kVA; Voltage V 230/400 V; Current A 25.2/11.4 A; Connections 16A & 32A; LED display; Fuel tank capacity L 15 ; Operating time at 75% load H 7; Noise level at 7 m dBA 72; DC output V/A 12/8.3 V; Battery V/Ah 12/30 V; ENGINE 192FE; Engine type Diesel; Power hp 12; Start electric; Cubic capacity CC 498; Oil capacity L 1.65; AL6-T ALTERNATOR; Power kW 6; Power factor 1 / 0.8; Tension regulation Brush/AVR; DIMENSIONS & WEIGHT Net weight kg 151 Gross weight 163 kg; Machine dimensions: 850x525x665 mm; Package dimensions: 870x550x820 mm; FC L20'/40'HQ 72/156; Unused in box Auction-ID: A1-41995-97

DAWER 10000E, Professional powerful gasoline generator with 10.5 KW power, 13 KVA. Max power 10.8 KW, 13.5 KVA. 220 volt plugs, generator with copper core. Boxed, suitable for frequent use Auction-ID: A1-40418-158

unused diesel generator Auction-ID: A1-40418-21

Unused generator Auction-ID: A1-40418-19

Diesel generator, 3 Phase Diesel generator 2x220 volt max 6500 watt, 165 kg, new in box Auction-ID: A1-40418-238

Maximum power 2200 watts, unused in box Auction-ID: A1-40418-121

Maximum power 2200 watts, unused in box Auction-ID: A1-40418-434

unused diesel generator Auction-ID: A1-40418-20

Fully automatic screed-mortar installation on tandem axle trailer; equipped with 60 meters of hose; working pressure 15 Bar; power supply by means of \"Olympian\" 20 kVA power generator; type GEP22-2 (2006); 13-pin plug; 230V connection; support leg; aluminum trailer; work tent; 3-leg funnel; 150 liter buffer; 3\" inch; 380V power cable; Fully operational Auction-ID: A1-40137-94

Diesel generator, 3 Phase Diesel generator 2x220 volt max 6500 watt, 165 kg, new in box Auction-ID: A1-40418-118

Maximum power 2200 watts, unused in box Auction-ID: A1-40418-433

Maximum power 2200 watts, unused in box Auction-ID: A1-40418-435

Maximum power 2200 watts, unused in box Auction-ID: A1-40418-432

unused Auction-ID: A1-40418-175

Unaudited Good condition Auction-ID: A7-46327-195

Very clean and brand-new 110 kVA diesel generator set in a high-quality silent canopy. Suitable for a wide range of applications including construction sites, industrial use, events, agricultural operations, backup power systems, and business continuity solutions. This generator is built in a robust sound-attenuated enclosure and delivers reliable performance under demanding conditions. Thanks to its compact design and professional finish, the unit is ready for immediate operation. Specifications Standby power: 110 kVA Prime power: 100 kVA Frequency: 50 Hz Voltage: 400/230V Speed: 1500 RPM 3-phase configuration Silent canopy / soundproof enclosure Large integrated fuel tank New condition Year of manufacture: 2025 Applications: Backup power supply Construction and infrastructure projects Agricultural sector Warehouses and workshops Events and temporary power supply ...

Very clean and brand-new 170 kVA diesel generator set in a high-quality silent canopy. Suitable for a wide range of applications including construction sites, industrial use, events, agricultural operations, backup power systems, and business continuity solutions. This generator is built in a robust sound-attenuated enclosure and delivers reliable performance under demanding conditions. Thanks to its compact design and professional finish, the unit is ready for immediate operation. Specifications Standby power: 170 kVA Prime power: 155 kVA Frequency: 50 Hz Voltage: 400/231V Speed: 1500 RPM 3-phase configuration Silent canopy / soundproof enclosure Integrated fuel tank – 380L New condition Year of manufacture: 2026 Applications Backup power supply Construction and infrastructure projects Agricultural sector Warehouses and workshops Events and temporary power supp ...

Viewing by appointment Working condition Auction-ID: A1-40377-36

Viewing by appointment Unused Auction-ID: A1-40377-39

Viewing by appointment Unused Auction-ID: A1-40377-29

Viewing by appointment Unused Auction-ID: A1-40377-38

Viewing by appointment Auction-ID: A1-40377-17

equipped with Cummins diesel engine \"939 hr operating hours\", electric motor, control panel, Grundfos multistage high pressure pump, KSB centrifugal pump, diesel tank volume 400 Ltrlot has been dismantled before the collection day, Auction-ID: A1-45845-5

Viewing by appointment Unused Auction-ID: A1-40377-80

equipped with electric motor, control panel, Grundfos multi-stage high-pressure pump, KSB centrifugal pump, lot has been dismantled for the collection day, Auction-ID: A1-45845-6

Viewing by appointment Auction-ID: A1-40377-31

Power generator, emergency power generator, generator, power generator, power generator, emergency power generator -Discount: You get a 20% discount on this item -Soundproofed: 91 dB -Power: 7.0 kVA 50 Hz -Petrol engine: Honda -2x: Schuko 230 Volt -1x: 380 Volt power outlet -1x: Charging cable, 12-volt socket -Dimensions of unit: 590/780/H750 mm -Weight: 136 kg

max. wheel diameter:275 mm gear width:55 mm max. module:6,5 min. module:1,5 Face Hobbing-Continious Process Continuous process: The workpiece and tool (usually Spiron) rotate at the same time, and all teeth are created in one operation at the same time. Knife head has several knife groups (not arranged in a circle) Parallel tooth Conical tooth tip surface Single Item procedure: The workpiece is stationary and the tool (usually Arcon) rotates and cuts a tooth by immersing the tool. Once a tooth is cut, the tool moves out of the tooth again, the workpiece divides by one tooth width and the next tooth is cut until all teeth are finished. Knife head has arranged all knives in a circular path. Conical tooth height Parallel tooth head surface C28 can do both, wheel + pinion. However, a C28 must be ?prepared? for the individual part procedure. I.e. direct measuring system + part gear brake, w ...

max. wheel diameter:275 mm gear width:55 mm max. module:6,5 min. module:1,5 Face Hobbing-Continious Process Continuous process: The workpiece and tool (usually Spiron) rotate at the same time, and all teeth are created in one operation at the same time. Knife head has several knife groups (not arranged in a circle) Parallel tooth Conical tooth tip surface Single Item procedure: The workpiece is stationary and the tool (usually Arcon) rotates and cuts a tooth by immersing the tool. Once a tooth is cut, the tool moves out of the tooth again, the workpiece divides by one tooth width and the next tooth is cut until all teeth are finished. Knife head has arranged all knives in a circular path. Conical tooth height Parallel tooth head surface C28 can do both, wheel + pinion. However, a C28 must be ?prepared? for the individual part procedure. I.e. direct measuring system + part gear brake, w ...

max. wheel diameter:275 mm gear width: mm max. module: weight of the machine ca.:9,4 t dimensions of the machine ca.:3,7 x 3 x 2,82 m min. number of teeth:5 max. number of teeth:2000 range of tooth size:20 mm max. gear width (internal machining):58 mm X-axis:325 mm y-axis:350 mm Z-axis:475 mm Bevel gear milling machine Gleason Pfauter including Promot Automation