127,279 used machines on RESALE, but how to find them? Machine Search
Total height container 390 cm! Equipped with: 4000 liter fuel diesel tank (empty)( 3450x1250x2000 mm) Including: 20ft container. Auction-ID: A1-43429-70
40kvA current power; 1,500 rpm; 4-cylinder Deutz engine oil-cooled; 3.1l displacement; Linz-Stamford Generator; AC output: 1 x 400V 32A, 1 x 400V 16A, 1 x Schuko 16A, 1 x Schuko 230V; Electric starter; Power failure detection AMF (Automatic Mains Failure); Automatic Switch Transfer (ATS) emergency power system; Operating time at 50% output approx. 28 hours (157l tank capacity); Auction-ID: A1-46030-12
30kvA current power; 1,500 rpm; 4-cylinder Deutz engine oil-cooled; 3.1l displacement; Linz-Stamford Generator; AC output: 1 x 400V 32A, 1 x 400V 16A, 1 x Schuko 16A, 1 x Schuko 230V; Electric starter; Power failure detection AMF (Automatic Mains Failure); Automatic Switch Transfer (ATS) emergency power system; Operating time at 50% output approx. 28 hours (157l tank capacity); Auction-ID: A1-46030-14
Multifuel 1Wartsila 19.5 MW CHP Power Plant with 2 × 20V34DF (2021) This 19.5 MW multifuel (Gas / HFO / LFO) combined heat and power (CHP) plant is equipped with two Wartsila 20V34DF generating sets and exhaust gas heat recovery boilers. The plant was commissioned at the end of 2022 and has accumulated approximately 20,000 operating hours since new. All operation and maintenance activities have been performed by the Wartsila OEM Service team, ensuring that both the generating sets and auxiliary systems are maintained according to standards and remain in near-new condition. The plant is currently fully operational, available for immediate delivery, and can be load-tested for qualified buyers. The scope of delivery includes complete mechanical equipment capable of producing 19.5 MW of electrical power, 9.0 tons/hour of saturated steam at 10 bar and 8 MW of 90C hot water . In ad ...
Viewing by appointment Working condition Auction-ID: A1-43890-27
Max snhelness: 2000, 20 LBS, diesel. Auction-ID: A1-40136-275
Unaudited Good condition Auction-ID: A7-46327-195
Key data: 710 KW
Nei pebbles Ltd electrical machine cage rotor induction motor output 710 KW machine designed for heavy-duty applications, often utilized for driving compressors, fans, or pumps
Steam generator PS400-60, electric heated stainless steel steam generator year of manufacture 2022, Factory inspection with the manufacturer 2026, 400 V / 60 kW / 50 Hz, 2-stage switchable (30 + 30 kW), max. operating pressure: 5 bar, adjustable operating pressure: 0 - 4 bar, max. steam amount: max. 84 kg/h (calculated value under optimal conditions), on a mobile frame, 1. Mechanical construction, The pot body is made of stainless steel 1.4571 and electrically welded. In, Kettle bodies are heating elements screwed in. The kettle body is located in a, Stainless steel housing and is clad with thermal insulation. In the stainless steel housing, the control cabinet is also located here. fittings (e.g.: steam outlet, water inlet,, etc.) lie outside the housing, 2. Functionality, Feedwater is pushed into the steam boiler by a water inlet valve. Is, when the intended water level is reached, the ...
25 liter fuel tank; 1x AC230; 1x AC; 420CC; 400V; IP23; speed 3000/min; AVR; 5622 Auction-ID: A1-45902-765
Tank capacity 4.1L; Max Ac output 2000W; Rated Ac output 1800W; unused; in the box; 230V connection; recoil; 8176 Auction-ID: A1-45902-160
25 liter fuel tank; 1x AC230; 1x AC; 420CC; 400V; IP23; speed 3000/min; AVR; 5622 Auction-ID: A1-45902-760
diesel power generator Brand: Ford power: 8,125 kVA Engine: 498 cc diesel engine Starting: Electric starter motor Sockets: 1 x 400 volts (CEE 3P+N+E) 1 x 230 volt (CEE 2P+E) 1 x 230 volts (CEE 7/3 – Schuko) Protection: circuit breaker and emergency stop Housing: Soundproofing housing Display: LED Display Keys: 2 keys Weight: 165 kg Degree of protection: IP44 Condition: unused, in the original packaging Auction-ID: A3-43519-523
25 liter fuel tank; 1x AC230; 1x AC; 420CC; 400V; IP23; speed 3000/min; AVR; 5622 Auction-ID: A1-45902-762
Tank capacity 4.1L; Max Ac output 2000W; Rated Ac output 1800W; unused; in the box; 230V connection; recoil; 8176 Auction-ID: A1-45902-161
Unused; rated output 28kW/35kVA; standby 30.8kw/38.5kva; 50HZ P.F. 0.8; RPM 1500; 3 PHASE; Genset controller with LCD; 72L diesel tank; Oil tank 13L; 2 batteries; ATS 100A Aisikai; 4 cylinder; Engine type 4-Stroke, V In-line, Water Cool, Electric start; Displacement (L) 3.76; v.v. CE and QC; 7310 Auction-ID: A1-45902-3
Unused; ATS; rated output 20kw/25kva; standby 22kW/28kVA; P.F. 0.8; RPM 1500; 72 liter tank; 3 PHASE; altenator type VG-184FS; Aisikai ATS 36A; Oil tank 13L; GENSET controller with LCD; 2 batteries; v.v. CE and QC; sleds incorporated in frame; Frequency 50Hz; 4 cylinder; 4-Stroke; V In-line; Water Cool; Electric start Auction-ID: A1-45902-2
Unused; ATS; rated output 20kw/25kva; standby 22kW/28kVA; P.F. 0.8; RPM 1500; 72 liter tank; 3 PHASE; altenator type VG-184FS; Aisikai ATS 36A; Oil tank 13L; GENSET controller with LCD; 2 batteries; v.v. CE and QC; sleds incorporated in frame; Frequency 50Hz; 4 cylinder; 4-Stroke; V In-line; Water Cool; Electric start Auction-ID: A1-45902-82
Unused; rated output 28kW/35kVA; standby 30.8kw/38.5kva; 50HZ P.F. 0.8; RPM 1500; 3 PHASE; Genset controller with LCD; 72L diesel tank; Oil tank 13L; 2 batteries; ATS 100A Aisikai; 4 cylinder; Engine type 4-Stroke, V In-line, Water Cool, Electric start; Displacement (L) 3.76; v.v. CE and QC; 7310 Auction-ID: A1-45902-85
25 liter fuel tank; 1x AC230; 1x AC; 420CC; 400V; IP23; speed 3000/min; AVR; 5622 Auction-ID: A1-45902-761
Unused; ATS; rated output 80kw/100kva; standby 88kw/110kva; P.F. 0.8; RPM 1500; 135 liter tank; 3 PHASE; altenator type 274C; ATS 160A; GENSET controller with LCD; 2 batteries; v.v. CE and QC; sleds incorporated in frame; 4-Stroke; V In-line; Water Cool; Electric start; 6742 Auction-ID: A1-45902-5
Unused; ATS; rated output 40kw/50kva; standby 44kW/55kVA; P.F. 0.8; RPM 1500; 99L diesel tank; 3 PHASE; altenator type 224D; ATS 100A Aisikai; Genset controller with LCD; 2 batteries; 4 cylinder; Engine type 4-Stroke, V In-line, Water Cool, Electric start; Displacement (L) 3.76; v.v. CE and QC; 7121 Auction-ID: A1-45902-88
25 liter fuel tank; 1x AC230; 1x AC; 420CC; 400V; IP23; speed 3000/min; AVR; 5622 Auction-ID: A1-45902-759
Unused; ATS; rated output 80kw/100kva; standby 88kw/110kva; P.F. 0.8; RPM 1500; 135 liter tank; 3 PHASE; altenator type 274C; ATS 160A; GENSET controller with LCD; 2 batteries; v.v. CE and QC; sleds incorporated in frame; 4-Stroke; V In-line; Water Cool; Electric start; 6742 Auction-ID: A1-45902-91
Unused; ATS; rated output 40kw/50kva; standby 44kW/55kVA; P.F. 0.8; RPM 1500; 99L diesel tank; 3 PHASE; altenator type 224D; ATS 100A Aisikai; Genset controller with LCD; 2 batteries; 4 cylinder; Engine type 4-Stroke, V In-line, Water Cool, Electric start; Displacement (L) 3.76; v.v. CE and QC; 6739 Auction-ID: A1-45902-86
Unused; ATS; rated output 40kw/50kva; standby 44kW/55kVA; P.F. 0.8; RPM 1500; 99L diesel tank; 3 PHASE; altenator type 224D; ATS 100A Aisikai; Genset controller with LCD; 2 batteries; 4 cylinder; Engine type 4-Stroke, V In-line, Water Cool, Electric start; Displacement (L) 3.76; v.v. CE and QC; 7121 Auction-ID: A1-45902-89
Unused; ATS; rated output 40kw/50kva; standby 44kW/55kVA; P.F. 0.8; RPM 1500; 99L diesel tank; 3 PHASE; altenator type 224D; ATS 100A Aisikai; Genset controller with LCD; 2 batteries; 4 cylinder; Engine type 4-Stroke, V In-line, Water Cool, Electric start; Displacement (L) 3.76; v.v. CE and QC; 6739 Auction-ID: A1-45902-4
max. wheel diameter:275 mm gear width:55 mm max. module:6,5 min. module:1,5 Face Hobbing-Continious Process Continuous process: The workpiece and tool (usually Spiron) rotate at the same time, and all teeth are created in one operation at the same time. Knife head has several knife groups (not arranged in a circle) Parallel tooth Conical tooth tip surface Single Item procedure: The workpiece is stationary and the tool (usually Arcon) rotates and cuts a tooth by immersing the tool. Once a tooth is cut, the tool moves out of the tooth again, the workpiece divides by one tooth width and the next tooth is cut until all teeth are finished. Knife head has arranged all knives in a circular path. Conical tooth height Parallel tooth head surface C28 can do both, wheel + pinion. However, a C28 must be ?prepared? for the individual part procedure. I.e. direct measuring system + part gear brake, w ...
max. wheel diameter:275 mm gear width:55 mm max. module:6,5 min. module:1,5 Face Hobbing-Continious Process Continuous process: The workpiece and tool (usually Spiron) rotate at the same time, and all teeth are created in one operation at the same time. Knife head has several knife groups (not arranged in a circle) Parallel tooth Conical tooth tip surface Single Item procedure: The workpiece is stationary and the tool (usually Arcon) rotates and cuts a tooth by immersing the tool. Once a tooth is cut, the tool moves out of the tooth again, the workpiece divides by one tooth width and the next tooth is cut until all teeth are finished. Knife head has arranged all knives in a circular path. Conical tooth height Parallel tooth head surface C28 can do both, wheel + pinion. However, a C28 must be ?prepared? for the individual part procedure. I.e. direct measuring system + part gear brake, w ...
max. wheel diameter:275 mm gear width: mm max. module: weight of the machine ca.:9,4 t dimensions of the machine ca.:3,7 x 3 x 2,82 m min. number of teeth:5 max. number of teeth:2000 range of tooth size:20 mm max. gear width (internal machining):58 mm X-axis:325 mm y-axis:350 mm Z-axis:475 mm Bevel gear milling machine Gleason Pfauter including Promot Automation
Key data: 2400 KW, 400 V
Diesel Generators 4 x 2400 kW / 50Hz Containerized CAT C175-16 Gensets Never operated, new like condition, containerized diesel generators made in year 2016 and 2017. Generating sets have modern, low fuel consumption optimized CAT C175-16 diesel engines running in 1500 rpm and having standby electric capacity of 2400kW and 2000kW in continues operation. Units include all necessary auxiliaries for full operation. Technical characteristics Manufacturer: Caterpillar USA Diesel Engines: CAT C175-16 Manufacturing year: 2016 and 2017 Operating hours: Zero (New condition) Number of units: 4 pcs Output – Stand-by: 2400kW / 400V / 50 Hz Output – Continuous duty: 2000kW / 400V / 50Hz Fuel: Diesel oil Control system: EMCP 4 Control Panels Container dimensions: 16 x 4.1 x 4.1 m (L x W x H) Container weight: 56’000 kg
Key data: 57900 KW, 11000 V
Diesel Power Plant MAN 57.9 MW / 50 Hz – year 2014 This diesel power plant consists of three identical 19.3 MW MAN 18V48/60 TS diesel generating units with auxiliaries. The engines are 500 rpm turbo charged with intercooling and they are installed on base frame forming a wet oil sump for engines. Diesel generators have been operated only approx. 5000 hours since new. Alternators are ABB made synchronous generators which are air-cooled, and they have their own lubrication oil system installed on concrete foundation and connected to the engines with flexible couplings. Engines are cooled with two separate cooling circuits connected to radiator cooling system. The control system is MAN SaCoS One. 11 kV breakers are Siemens SF6 type. The plant is still installed and fully operational and in good technical condition. Main technical data Manufacturer MAN Augsburg, Germany Manufa ...
Gas-fired high-speed steam generator with feed water treatment and dosage module., Additional title: gas heated, Steam capacity: 120 kg/h, Perm. working pressure: 10 bar, Capacity: 96 Ltr, Set pressure gas burner: 20 mbar, Length: 1,6 m, Width: 0,95 m, Height: 2,2 m, Base construction: mounted on platform, Features: feed water treatment and dosage module
; Power [PS]: 354; Gross weight [kg]: 5787; Engine: Battery System: LIFePO4; Accessories: Tanker, Control Panel, Wiring port: L1, L2, L3, N, PE, Power Input:, - AC socket: 3P/5W, 1x200kW, 2x30kW, - AC copper: 3P/4W, 200kW, - DC socket: 60kW, Power Output:, - AC socket: 3P/5W, 1x200kW, - AC socket: 1P, 1x16A; 3P, 1x32A, - AC copper: 3P/4W, 200k
; Power [PS]: 408; Gross weight [kg]: 9424; Engine: Battery System: LIFePO4; Accessories: Tanker, Control Panel, Wiring port: L1, L2, L3, N, PE, Power Input:, - AC socket: 3P/5W, 1x300kW, 3x30kW, - AC copper: 3P/4W, 300kW, - DC socket: 110kW, Power Output:, - AC socket: 3P/5W, 1x300kW, - AC socket: 1P, 1x16A; 3P, 1x32A, - AC copper: 3P/4W, 300
Key data: 53500 KW, 11000 V
Diesel Power Plant Wartsila 50 MW with 6 x 20V32 HFO Generator Set The diesel power plant has a total installed capacity of 53.5 MW and comprises six identical Wartsila 20V32 generator sets, each rated at 8.9 MWe (50 Hz). The generating sets are equipped with asynchronous AKV alternators and are designed to operate on heavy fuel oil (HFO). All necessary auxiliary systems are included. Each engine operates at 750 rpm and is turbocharged with intercooling. The engines are mounted on base frames that also function as wet oil sumps. The generator sets have accumulated approximately 35,000 total operating hours and have been maintained in accordance with Wartsila’s service guidelines. Maintenance has been performed by Wartsila Service and a certified service provider specializing in Wartsila engines. Engine cooling is provided by a radiator-based cooling system with two separate co ...
Diesel Generators 1600 kWe / 50Hz with CAT 3516B engines and local control panel We have multiple identical CAT 3516B skid-mounted diesel generating sets available, all manufactured in 2018 and installed in the same HFO power plant, complete with full HFO plant auxiliaries. Each engine is coupled to a 2000 kVA / 415 V / 50 Hz brushless synchronous alternator via a flexible coupling, both mounted on a rigid base frame. These units are optimized for low emissions, high efficiency, and continuous base load operation. The generators have been serviced exclusively by the local CAT dealer and have only 1,500–2,000 operating hours. The standard scope of supply includes: • Engine control panel (EMCP 4) • 24V electric starting system • Radiator cooler Balance of Plant (BOP) equipment is available for customers requiring multiple units. Technical data Engine type CAT ...
maximum number of results exceeded
please refine your search
250 € 
