gas generator cat used for sale

Flange gaskets, 9 pieces KLINGER KLINGERSIL Material: C - 4409 Material thickness: 2 mm diameter ( outside / inside ): 6x Ø 680 / 620 mm 2x Ø 580 / 520 mm 1x Ø 328 / 274 mm 1x Ø 218 / 169 mm 1x Ø 165 / 115 mm New Dimensions ( Packaging ): 870 x 720 x 40 mm

Flange gaskets, 10 pieces KLINGER KLINGERSIL Material: C - 4409 Material thickness: 2 mm diameter ( outside / inside ): 6x Ø 680 / 620 mm 2x Ø 580 / 520 mm 1x Ø 192 / 141 mm 1x Ø 162 / 115 mm New Dimensions ( packaging ): 770 x 730 x 40 mm

Safety device, flashback arrester, non-return valve, for burner gas WITT 85-30 DIN EN ISO 5175-1 EN730-1 Acetylene: ( A ) 1,,5 bar methane, natural gas: ( M ) 5.0 bar propane, liquefied petroleum gases: ( P ) 3.5 bar hydrogen: ( H ) 4.0 bar input: 1 LH MG Output: 1 LH AGS Material: Brass New ! Dimensions: 190 x 84 x 84 mm

Safety device, flashback arrester, non-return valve, for burner gas WITT 85-30 DIN EN ISO 5175-1 EN730-1 acetylene: ( A ) 1,5 bar city, long-distance and natural gas: ( CM ) 5.0 bar propane, liquefied petroleum gases: ( P ) 3.5 bar hydrogen: ( H ) 4.0 bar input: 3/4 LH MG Output: 3/4 LH AGS Material: Brass used, tested ! Dimensions: 180 x 84 x 84 mm

Gas pressure switch, pressure switch HEGWEIN STUTTGART Type: FD2K1-7 Setting range: 5 - 70 mbar Operating pressure: max. 300 mbar connection: 1/4 ( inch ) switching voltage: 220 V AC, 50 Hz IP54 used, tested ! Dimensions: 130 x 125 x 110 mm

Gas Pressure Switch, Pressure Switch HONEYWELL Type: C6045D 1043 Setting range: 0,2 - 3 mbar Operating pressure: max. 100 mbar Connection: 1/4 ( inch ) / 1/8 ( inch ) Switching voltage: 220 / 240 V AC, 50 Hz Switching current: 12 (2) A IP40 used, checked! Dimensions: 130 x 125 x 110 mm

Machine type: MIG/MAG welding system Make MERKLE Type M 254 K Appendix No.: 22.538 Connection voltage 3 x 400 volts Setting range 25 – 250 amps Duty cycle 60 % d.c. at 250 amps 100% d.c. at 200 amps Current adjustment infinitely variable Cooling transformer by built-in fan Cooling burner gas-cooled Portable compact system design Wire feed gearbox 4-roller drive DV 25 Fuse 16 amps Dimensions L x W x H 955 x 460 x 760 mm Weight 110 kg Age: approx. 25 years Condition workshop-tested, good incl. UVV test protocol Scope of delivery welding system with the following accessories: 1 piece welding torch SBT 307 G, 3 mtr. long 1 piece ground cable 1 piece pressure reducer with 2 pressure gauges 1 roll of welding wire D 300, 5 kg 1 pair of welding gloves with cuff 1 piece spare parts cheese cpl. Equipped 1 can of non-stick spray  ...

Replacement gasket, for vacuum lifter, 5 pieces SCHMALZ SKIRT-250-60 NK-35 11.01.40.00363 diameter ( inside / outside ): Ø 60 / 250 mm New ! Dimensions ( packaging ): 210 x 100 x 100 mm

Transparent protective shell and gasket, 6 pieces PEPPERL+FUCHS 2x WCS2-PL2 Part No. 198619 Dimensions: 115 x 42 x 1 2 mm 4x WCS3-PL2 Part No. 198620 Dimensions: 115 x 57 x 12 mm Material: Polycarbonate, crystal clear, seal: EPDM New ! Dimensions ( packaging ): 120 x 120 x 25 mm

Gas distributor, gas diffuser, 8 pieces TBI INDUSTRIES RM 80W M6 ( RM80WM6 ) Product no.: 671P102003 Diameter: Ø 17.8 mm Length: 21.5 mm Material: Ceramic Other quantities on request ! New ! Dimensions ( packaging ): 85 x 35 x 35 mm

Hollow chamber gasket profile, window profile, push-in SAINT-GOBIAN SIPRO® profile: P1476-724 Length: approx. 55 m Profile width: 26 mm Profile height: 27 mm Material: high-viscosity silicone rubber New ! Dimensions ( packaging ): 600 x 600 x 250 mm

Enigines stopped end Overhauled never run after again. Rated power 1,2 MW MAX ALTITUDE OF INSTALLATION : 500 M MAXIMUM AMBIENT TEMP : 25 C RATED FREQUENCY : 50 HZ RATED VOLTAGE : 400 V RATED CURRENT : 1,732 A MASS : 12,025 KG 2. GENERATOR DETAILS: MAKE : LEROY SOMER ALTERNATORS PARTNER LSA : C 50.2VL10B C 6S/4 DATE : 2013/21 FREQUENCY : 50 HZ SPEED : 1500 RPM PROTECTION : IP23/4 POWER FACTOR : 1.0 INSULATION CLASS: H/F A.V.R : R450 EXCITATION : AREP ALTITUDE : < 1000 M MASS WEIGHT : 3300 KG HEAT EXCHANGER DETAILS: MAKE : ARRA (A.S.T.R.A. REFRIGERANTI) DATE : 07/09/2012 DESIGN PRESSURE (TUBE SIDE) : 5 BAR DESIGN PRESSURE (SHEEL SIDE) : 4.5 BAR TEST PRESSURE (TUBE SIDE) : 7.5 BAR TEST PRESSURE (SHEEL SIDE)  ...

Gas meter KROMSCHRÖDER BK4T Qmax: 6 m3/h Qmin: 0.04 m3/h pmax 0.1 bar 2x connection piece, distance: 250 mm connection thread: 11/4 ( inch ) Connection inner diameter: 32 mm used, tested ! Dimensions: 330 x 165 x 240 mm

Gas pressure regulator ELSTER MAF40EI HP: 1 bar Pu: pas+4 - 1,000 mbar Pds: 40 mbar AC 10 / SG 30 Wh 20 - 300 mbar Size: Ø 24.5 mm Qmax: 100 m3/h Natural Gas New ! Dimensions: 290 x 250 x 200 mm

Gas-shielded arc welding rod OERLIKON CARBOFIL 1 R EN 440 - G 46 2 M G3 Si 1 Material: 1,,5125 Diameter: Ø 1.2 mm Spool: Ø 500 mm Quantity: approx. 185 kg New 500 x 500 x 320 mm

Pressure regulator manually adjustable, pure gas regulator DRUVA Type: LMD-500-01 Inlet pressure: max. 50 bar outlet pressure: 0.5 - 6 bar stainless steel ! Dimensions: 125 x 115 x 50 mm

Pressure regulator manually adjustable, pure gas regulator DRÄGER TESCOM type: 44-3262-242H283 Inlet pressure: max. 35 bar outlet pressure: 0 - 35 bar stainless steel ! Dimensions: 135 x 135 x 70 mm

Tecnodom Master 150 Gastro refrigerated counter Description Refrigerated counter in a modern design. Ventilated version, equipped with hypothermia, lighting in the cove and an uncooled glass intermediate floor. Analogue temperature display and night cover in the form of plexiglass sliding windows. Very suitable for your cafeteria, sandwich shop, supermarket and any catering business. Includes sliding windows made of plastic With curved tilting window Including intermediate level Specifications Dimensions WxDxH: 1500x898x1243 Inside dimensions: 138x56x70 cm Connection value: 0.65 kW Connection voltage: 230V Temperature range degrees: +2 to +6 degrees More items - new and used - can be found in our shop! International shipping costs on request!

Pressure regulator manually adjustable, pure gas regulator DRÄGER TESCOM Type: 44-2260-242-010 Inlet pressure: max. 27 bar outlet pressure: 0 - 1.7 bar stainless steel ! Dimensions: 120 x 120 x 90 mm

SGT 400 YOC 2010, 10.000 hours only 6 years in operation at peak load conserved 50 Hz 11 kV 14,300 kVA 1500 rpm still complete installed. relocation can be offered

Solenoid valve fuel gas MERTIK MV 10.2.4 Pn: 0.15 MPa (1.5 bar) nominal diameter: 10 mm (NW10) Screw connection: 1/2 Coil: 220 V AC 50 Hz IP55 New ! Dimensions: 100 x 90 x 80 mm

Sealing Gas Valve PFEIFFER VACUUM Type: PM Z01 313 A ( PMZ01313A ) 42806 Nominal diameter: 1/8 inch Gas flow: 147,5 - 20 sccm ( standard cubic centimeters ) inlet pressure: max. 1500 hPa ( 1.5 bar ) Power consumption: 4.0 W Control voltage: 24 V DC Material ( valve body ): Edelstahl New, with documents ! Dimensions ( valve ): 110 x 50 x 20 mm Dimensions ( packaging ): 180 x 120 x 50 mm

Sealing gas valve, vacuum valve PFEIFFER VACUUM Type: PM Z01 142 Nominal diameter: DN 16 KF ( 5/8 ) Material ( valve body ): Stainless steel New ! Dimensions: 75 x 35 x 35 mm

Hitachi LaChrom L 7485 Fluorescence Detector Excitation 200-850 nm Emission 250-900 nm Autozero analytical flow cell

Pressure regulator manually adjustable, pure gas regulator DRÄGER TESCOM Type: 44-2262-242-009 Inlet pressure: max. 27 bar outlet pressure: 0 - 7 bar stainless steel ! Dimensions: 120 x 120 x 60 mm

Pressure regulator manually adjustable, pure gas regulator DRÄGER TESCOM Type: 44-2261-242-010 Inlet pressure: max. 27 bar outlet pressure: 0 - 3.5 bar stainless steel ! Dimensions: 120 x 120 x 60 mm

Hot gas welder, multi-stage SCHLOMA ZIS-487/2 200 / 400 / 600 W 220 V AC approx. 2.8 m connection cable suitable air supply - see LU235 ! New ! Dimensions: 470 x 200 x 50 mm

Sealing, ring and plate cutting machine FRIPA Model: P125-1 Working range: Ø 30 - 300 mm Projection: 230 mm Working table: 320 x 420 mm Working height: 45 mm Distance Punch - Working table: max. 40 mm used, tested ! Dimensions: 540 x 320 x 440 mm

Gasket welder (Ref. No. 160-2667) for window seals Welding width 40 mm 220 volts L x W x H: 250 x 300 x 100 mm Weight approx. 3 kg The machine is in good condition, ready for operation Subject to changes, errors and prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system+technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone: 0041 62 966 18 32 Fax 0041 62 966 21 12

Agilent 1200 HPLC system consisting of: Agilent 1200 G 1312B SL binary HPLC pump (up to 600 bar) Agilent 1200 G 1315B Diode Array Detector Agilent 1200 G 1316 B TLC SL Colcom/column thermostat Agilent 1200 G 1379 Degasser Agilent 1200 G 1330 Thermostat for Autosampler Agilent 1200 G 1367D Autosampler Hip ALS SL + on request with Agilent Chemstation/Warranty

Agilent 5973N inert MSD with GC Agilent 6890 N Agilent 5973 N inert MSD with GC Agilent 6890 N Network Agilent 5973 inert MSD with EI and turbomolecular pump enhanced BOC Edwards Turbopump Agilent GC 6890 Network with Split/Splitless Injector/EPC Edwards Vacuum Pump 1.5 MSD Productivity Chemstation E02.02 on PC/Win 10 NIST on request Option: Agilent Liquid Sampler, CTC or Gerstel MPS2 Sampler currently serviced/with warranty Installation on request

Gasket kits SMC 13x MGP32-PS 2x MGP40-PS 4x MGP50-PS 2x CS95-50 for compact cylinders, MGP series and tie rod cylinders series C95/96 retail sale on request ! New ! Dimensions ( packaging ): 120 x 80 x 60 mm

Gasket set SCHUNK 0370895 DSA PNG+125 8-piece New ! Dimensions ( packaging ): 120 x 70 x 10 mm

Gasket kit SCHUNK 0303451 DSA PZN+80 4-piece New ! Dimensions ( packaging ): 120 x 70 x 10 mm

Rubber-cork gasket, 10 pieces SCHUNK 9612791 PGN 160 Deckel Material: Rubber - Cork - Mixture Material thickness: 0.75 mm New ! Dimensions ( packaging ): 190 x 120 x 10 mm

Machine type: MIG/MAG welding system Make MERKLE Type RedMIG 2000 K Serial No. 81.838 Connection voltage 3 x 400 volts Setting range 25 – 200 amps Duty cycle 30 % d.c. at 200 amps 60% d.c. at 140 amps Current setting 7 switching levels Cooling transformer by built-in fan Cooling burner gas-cooled Portable compact system design Wire feeder 4-roller drive DV 26 Fuse 16 amps Dimensions L x W x H 800 x 460 x 655 mm Weight 70 kg Age approx. 12 years Condition workshop-tested, good, incl. UVV test protocol Scope of delivery welding system with the following accessories: 1 piece welding torch, 3 mtr. long 1 piece ground cable 1 piece of pressure reducer argon with 2 pressure gauges 1 roll of welding wire D-300 coil, 5 kg 1 can of non-stick spray 1 piece hand shield 1 piece protective glass 10 DIN 1 piece facing glass white 1 piece  ...

Screw-in cylinder, with sealing kit, 3 pieces ROEMHELD, HILMA, STARK 1471-001 piston diameter: Ø 16 mm Rod diameter: Ø 10 mm stroke: 10 mm cylinder head reworked to hexagon with width across flats: 24 mm Seal kit: 0131471 Seal kit: New , 9 pieces used, tested ! Dimensions ( screw-in cylinder ): 60 x 28 x 28 mm Dimensions ( packaging ): 140 x 100 x 30 mm

Machine type: MIG/MAG welding system Make: Werner Type Wemag 300 K-1 Connection voltage 3 x 400 volts Setting range 40 - 300 amps Duty cycle 60 % d.c. at 300 amps 100% d.c. at 230 amps Current setting 21 switching levels Cooling transformer by built-in fan Cooling burner gas-cooled Design of mobile industrial plant Wire feed gearbox toothed 4-roller gearbox Fuse 32 amps Dimensions L x W x H 1100 x 420 x 720 mm Weight 135 kg Age: 32 Years Optional accessories 2-stroke / 4-stroke Condition workshop-tested, good, incl. UVV workshop test protocol Scope of delivery welding system with the following accessories: 1 piece welding torch, 3 mtr. long 1 piece ground cable 1 piece of pressure reducer argon with 2 pressure gauges 1 piece welding wire D-300, 5 kg 1 piece of welding gloves with cuff 1 piece spare parts box cpl. Equipped 1 piec ...

Steam boiler Loos with Weißhaupt gas burner Type: U-ND 500 capacity: 500 kg steam/h Max. operating overpressure: 1 bar Test overpressure: 2 bar Water capacity full approx.: 770 l year of construction: 2003/2004 CE-marking: 0036 incl. hot water tank with condensate pump

Recon Part Number: RMG 985B-200/100 Attention: We also have various other RECON parts from different manufacturers / types available. We will be happy to send you our current stock list. ---------------------------------------------------------------------- ----------- Sold only to commercial customers! ---------------------------------------------------------------------- ------------ If you have any further questions, please do not hesitate to contact us!

Recon Part Number: 1227 8128 Attention: We also have various other RECON parts from different manufacturers / types available. We will be happy to send you our current stock list. ---------------------------------------------------------------------- ----------- Sold only to commercial customers! ---------------------------------------------------------------------- ------------ If you have any further questions, please do not hesitate to contact us!

Machine type: MIG/MAG welding system Make Oerlikon Type Minicito 304 Connection voltage 3 x 400 Volt Adjustment range 35 – 300 amps Duty cycle 35% ED at 300 amps 60% ED at 230 amps 100% ED at 180 amps Current setting: 14 switching levels Cooling transformer by built-in fan Cooling burner gas-cooled Design of mobile compact system Wire feeder toothed 4-roller gearbox Fuse protection 16 amps Dimensions L x W x H 950 x 400 x 820 mm Weight 80 kg Age approx. 15 years Condition workshop-tested, good, incl. UVV test report Scope of delivery welding system with the following accessories: 1 piece welding torch 3 mtr. long 1 piece of ground cable 1 piece pressure reducer 1 roll of welding wire D-300 coil, 5 kg 1 can of non-stick spray 1 piece of hand shield 1 piece of protective glass 10 DIN 1 piece of glass attachment white 1 spare  ...

LORCH HR 918 REMOTE CONTROL LORCH HR 918 remote control As new. For details see Lorch With conversion kit to CAN bus (if this is not already on your machine) Price: €500 ex VAT

Capacity 1500 kw Gas type : Biogas With container Engines not used

Offer 22437 Specifications: - Welding current max. 450 A / 36 V 60% ED - 350 A / 32 V 100% ED - Welding current adjustable in 2x 18 switch levels 60 - 450 A - 2 bar + 4 bar – regulation, points, interval - 2 roll wire feeders, infinitely adjustable in separate - Wire feeder case CLOSS , CK 68 C - Intermediate package machine – wire feed approx. 6 m - Hose package water-cooled approx. 4 m - Ground cable -Reducer - Connection 400 V / 19 KVA - Space requirement approx. W 490 x H 1200 x D 1100 mm - Weight approx. 180 kg

For sale : 2 pcs. the complete TEM-EVO cabinets (w/CPU 1247 3959 KZ) 1 pc. Operating terminal BRT 1247 3955 KZ 2 pcs. I/O-Controller module CMPS 1247 0960 KZ 4 pcs. I/O-Controller module CM16DI 1247 0962 KZ 4 pcs. I/O-Controller module CM8DO 1247 0963 KZ 2 pcs. I/O-Controller module CM16DO 1247 0964 KZ 8 pcs. I/O-Controller module CM8DIO 1247 0965 KZ 14 pcs. I/O-Controller module CM2AI 1247 0966 KZ

Machine type: MIG/MAG welding system Make MERKLE Type OptiMIG 351 DW Plant no.: 129.187 Connection voltage 3 x 400 Volt Adjustment range 25 - 350 amps Duty cycle 60% ED at 350 amps 100% ED at 300 amps Current Adjustment 28 Switching Levels Cooling transformer by built-in fan Cooling burner water-cooled Design of mobile industrial plant with separate DV case Wire Feed Gearbox 4-Roller Gearbox DV 26 Fuse protection 32 amps Dimensions L x W x H 990 x 510 x 1,135 mm Weight 210 kg Optional Accessories Volt and Ampere Digital Display Automatic wiring Age 24 months Condition workshop-tested, like new, incl. UVV workshop test report Scope of delivery welding system with the following accessories: 1 piece welding torch 3 mtr. long 1 piece of ground cable 4 mtr. long, 70 sq mm 1 piece of pressure reducer argon with 2 pressure gauges 1  ...

Machine type: MIG/MAG welding system Make MERKLE Type OptiMIG 351 DW Plant no.: 123.585 Connection voltage 3 x 400 Volt Adjustment range 25 - 350 amps Duty cycle 60% ED at 350 amps 100% ED at 300 amps Current Adjustment 28 Switching Levels Cooling transformer by built-in fan Cooling burner water-cooled Design of mobile industrial plant with separate DV case Wire Feed Gearbox 4-Roller Gearbox DV 26 Fuse protection 32 amps Dimensions L x W x H 990 x 510 x 1,135 mm Weight 210 kg Optional Accessories Volt and Ampere Digital Display Automatic wiring Age 4 years Condition workshop-tested, very good, incl. UVV workshop test report Scope of delivery welding system with the following accessories: 1 piece welding torch 3 mtr. long 1 piece of ground cable 4 mtr. long, 70 sq mm 1 piece of pressure reducer argon with 2 pressure gauges 1 p ...

We are also happy to send you videos of how it works. Shipping possible by arrangement for an extra charge. If you have any questions, just get in touch. PLEASE NOTE: This offer is non-binding and subject to availability. The indicated price is per piece, net, plus 19% VAT. free loading from DE-83395 Freilassing.

CAT G3516B YOM: 2006 Natural gas Power: 1085Kw Always maintenanced under CATERPILLIAR contract full service. Scope of supply: Complete package Genset Control panels Gas train Silincer Mufller Coolers Oil system