gas generator 250 used for sale

Unused; ATS; rated output 80kw/100kva; standby 88kw/110kva; P.F. 0.8; RPM 1500; 135 liter tank; 3 PHASE; altenator type 274C; ATS 160A; GENSET controller with LCD; 2 batteries; v.v. CE and QC; sleds incorporated in frame; 4-Stroke; V In-line; Water Cool; Electric start; 6742 Auction-ID: A1-46415-5

25 liter fuel tank; 1x AC230; 1x AC; 420CC; 400V; IP23; speed 3000/min; AVR; 5622 Auction-ID: A1-46415-759

25 liter fuel tank; 1x AC230; 1x AC; 420CC; 400V; IP23; speed 3000/min; AVR; 5622 Auction-ID: A1-46415-762

Tank capacity 4.1L; Max Ac output 2000W; Rated Ac output 1800W; unused; in the box; 230V connection; recoil; 8176 Auction-ID: A1-46415-161

AGGRETECH T9000FULL unit – used General data • Manufacturer: Aggretech / Energy • Model: T9000FULL • Year of construction: 2022 • Condition: very good / little used Technical data • Power: 9 kVA (400V) / 7 kVA (230V) • Voltage: 400 / 230 V • Current: 25.2 / 11.4 A • Weight: approx. 162 kg Facilities • Soundproofed (Silent) • ATS (automatic start possible) • 400V & 230V sockets • Digital display (V/A/Hz) • Mobile (castors) Application area • Construction site / emergency power • Agriculture / Trade • Mobile power supply Condition • Used • Ready to use Contact Now Kristina Kreimer – Surplex / TBAuctions k.kreimer@tbauctions.com +49 151 55771219 Auction-ID: A7-46022-2027

Unused; ATS; rated output 40kw/50kva; standby 44kW/55kVA; P.F. 0.8; RPM 1500; 99L diesel tank; 3 PHASE; altenator type 224D; ATS 100A Aisikai; Genset controller with LCD; 2 batteries; 4 cylinder; Engine type 4-Stroke, V In-line, Water Cool, Electric start; Displacement (L) 3.76; v.v. CE and QC; 6739 Auction-ID: A1-46415-86

Unused; ATS; rated output 20kw/25kva; standby 22kW/28kVA; P.F. 0.8; RPM 1500; 72 liter tank; 3 PHASE; altenator type VG-184FS; Aisikai ATS 36A; Oil tank 13L; GENSET controller with LCD; 2 batteries; v.v. CE and QC; sleds incorporated in frame; Frequency 50Hz; 4 cylinder; 4-Stroke; V In-line; Water Cool; Electric start Auction-ID: A1-46415-82

Unused; ATS; rated output 40kw/50kva; standby 44kW/55kVA; P.F. 0.8; RPM 1500; 99L diesel tank; 3 PHASE; altenator type 224D; ATS 100A Aisikai; Genset controller with LCD; 2 batteries; 4 cylinder; Engine type 4-Stroke, V In-line, Water Cool, Electric start; Displacement (L) 3.76; v.v. CE and QC; 7121 Auction-ID: A1-46415-88

Unused; rated output 28kW/35kVA; standby 30.8kw/38.5kva; 50HZ P.F. 0.8; RPM 1500; 3 PHASE; Genset controller with LCD; 72L diesel tank; Oil tank 13L; 2 batteries; ATS 100A Aisikai; 4 cylinder; Engine type 4-Stroke, V In-line, Water Cool, Electric start; Displacement (L) 3.76; v.v. CE and QC; 7310 Auction-ID: A1-46415-85

Gas-fired high-speed steam generator with feed water treatment and dosage module., Additional title: gas heated, Steam capacity: 120 kg/h, Perm. working pressure: 10 bar, Capacity: 96 Ltr, Set pressure gas burner: 20 mbar, Length: 1,6 m, Width: 0,95 m, Height: 2,2 m, Base construction: mounted on platform, Features: feed water treatment and dosage module

Pressure output max. 15,000 PSI incl. weight set and spare seals lots of accessories Type: Hydraulic Hand Pump / Comparator Pump Pressure range: 0 to 1,000 bar (15,000 psi) Medium: Water or Oil Auction-ID: A1-46686-6

Operating pressure max. 1890 bar, ratio 1:440 Weight incl. packaging approx. 350kg Original price approx. 50.000€ Auction-ID: A1-46686-11

Unaudited Good condition Auction-ID: A7-46327-195

max. wheel diameter:275 mm gear width:55 mm max. module:6,5 min. module:1,5 Face Hobbing-Continious Process Continuous process: The workpiece and tool (usually Spiron) rotate at the same time, and all teeth are created in one operation at the same time. Knife head has several knife groups (not arranged in a circle) Parallel tooth Conical tooth tip surface Single Item procedure: The workpiece is stationary and the tool (usually Arcon) rotates and cuts a tooth by immersing the tool. Once a tooth is cut, the tool moves out of the tooth again, the workpiece divides by one tooth width and the next tooth is cut until all teeth are finished. Knife head has arranged all knives in a circular path. Conical tooth height Parallel tooth head surface C28 can do both, wheel + pinion. However, a C28 must be ?prepared? for the individual part procedure. I.e. direct measuring system + part gear brake, w ...

max. wheel diameter:275 mm gear width:55 mm max. module:6,5 min. module:1,5 Face Hobbing-Continious Process Continuous process: The workpiece and tool (usually Spiron) rotate at the same time, and all teeth are created in one operation at the same time. Knife head has several knife groups (not arranged in a circle) Parallel tooth Conical tooth tip surface Single Item procedure: The workpiece is stationary and the tool (usually Arcon) rotates and cuts a tooth by immersing the tool. Once a tooth is cut, the tool moves out of the tooth again, the workpiece divides by one tooth width and the next tooth is cut until all teeth are finished. Knife head has arranged all knives in a circular path. Conical tooth height Parallel tooth head surface C28 can do both, wheel + pinion. However, a C28 must be ?prepared? for the individual part procedure. I.e. direct measuring system + part gear brake, w ...

max. wheel diameter:275 mm gear width: mm max. module: weight of the machine ca.:9,4 t dimensions of the machine ca.:3,7 x 3 x 2,82 m min. number of teeth:5 max. number of teeth:2000 range of tooth size:20 mm max. gear width (internal machining):58 mm X-axis:325 mm y-axis:350 mm Z-axis:475 mm Bevel gear milling machine Gleason Pfauter including Promot Automation

"The Ahlbrandt FG-3102TT-LCD-PB Corona Treatment Generator is an industrial equipment designed for the activation of material surfaces, allowing to improve the adhesion of inks, glues or coatings during production processes. This Ahlbrandt FG-3102TT-LCD-PB model offers precise and reliable processing control, ensuring consistent performance on various substrates. Offered as is, it is an interesting solution for professionals wishing to integrate or recommission a surface treatment generator. With dimensions of 120 cm in length, 80 cm in width and 56 cm in height, this compact device fits easily into an industrial environment. Its weight of 66 kg is a testament to its robustness and ensures optimal stability during operation. The Ahlbrandt FG-3102TT-LCD-PB is therefore an effective tool for improving the quality and efficiency of surface treatment operations."

"The Plasmatreat FG 5001 plasma generator is an industrial piece of equipment designed for surface treatment applications by Openair-Plasma technology. Robust and efficient, it improves the adhesion, cleaning and activation of materials in many industrial processes. This model, offered as is, is a reliable solution for demanding production environments or recommissioning projects. Compact with dimensions of 60 cm long, 80 cm wide and 35 cm high, it can be easily integrated into an existing production line. Its weight of 55 kg is a testament to its solid construction, suitable for intensive industrial use. Designed by the Plasmatreat brand, recognized for its expertise in plasma technologies, the FG 5001 offers an efficient basis for surface treatment operations requiring precision and consistency."