gas generator 250 used for sale

equipped with 2 swivel wheels; unused in box; 2371; Auction-ID: A1-45902-617

- Producer Cefla - Type TN 2250 - Length 2.250 mm - Belt with 1.360 mm - Overall width 1.600 mm - Year of construction 2008 - FU-Regelung für Feed speed - Feed speed ~ 2 - 8 m/min - frequency converter on site - Location, in stock - Voltage / HZ 400 / 50 - Motor power 0,55 kW - Commodity code 8428330 - Weight 270 kg

Column jib crane, overhead crane, workstation crane -Manufacturer: KWG, Column jib crane type SSK-B 1.0-2.10, lifting capacity 1000 kg -Base plate: Ø 820 mm -Load capacity: 2500 kg -Chain hoist: ABUS type GM 6 2500.3-2, year of manufacture 2016 -2x lifting speed: 3.0/0.8 m/min -Drive system: yes -Swivel drive: yes -Projection: 5640 mm -Total height: 5060 mm -Hook height: 3830 mm -Swivel range: 360° -Transport dimensions: 1660/5870/H2460 mm -Empty weight: 2011 kg

Various models; various sizes; B-choice; from the stock; on 10 pallets Auction-ID: A1-46266-539

According to photos, weight estimated Auction-ID: A1-45666-9

Various models; various sizes; B-choice; from the stock; on 10 pallets Auction-ID: A1-46266-530

Various models; various sizes; B-choice; from the stock; on 10 pallets Auction-ID: A1-46266-538

Various models; various sizes; B-choice; from the stock; on 10 pallets Auction-ID: A1-46266-531

Condition: unchecked Item is sold as is Weight may be ggbfs. Deviate. Machine must be dismantled by the buyer and transported out of the hall area. It cannot be guaranteed that a forklift is on site. Auction-ID: A1-46354-59

Various models; various sizes; B-choice; from the stock; on 10 pallets Auction-ID: A1-46266-537

GMC C2500 High Sierra 25 – Built in 1975 • Model: GMC C2500 High Sierra 25 • Registration date: 31.12.1975 • Engine: 7.4 liter V8 big block gasoline • Standard power: 180 kW / 245 hp • Power output after conversion: 257 kW / approx. 350 hp • Automatic transmission • Rear-wheel drive • H license plate (classic car registration) • Vehicle Type: Truck Open Box • High Sierra Amenities • Engine, drive & electrics overhauled (2022) • Stainless steel exhaust system • Tyres: 33×12.5 R16.5 LT • Towing capacity: approx. 2,700 kg • Distinctive US pickup of the C/K series (3/4-ton) • Classic American V8 sound • Collector's vehicle with value appreciation potential Auction-ID: 048-XF3-5

Various models; various sizes; B-choice; from the stock; on 10 pallets Auction-ID: A1-46266-536

Condition: unchecked Item is sold as is Weight may be ggbfs. Deviate. Machine must be dismantled by the buyer and transported out of the hall area. It cannot be guaranteed that a forklift is on site. Auction-ID: A1-46354-3

Various models; various sizes; B-choice; from the stock; on 10 pallets Auction-ID: A1-46266-529

Condition: unchecked Item is sold as is Weight may be ggbfs. Deviate. Auction-ID: A1-46354-21

Demonstration machine Speed in 6 steps 125 - 2000rpm. 3-jaw chuck 125 mm. 4-jaw chuck 125 mm. (Independent) Fixed bezel. Rotating bezel. 4-fold steel holder. Scout tub. Back wall. Spindle protection. Hardened bed rails. Longitudinal feed with left/right shift. Set of interchangeable wheels. Related tools. Turning diameter over bed 250 mm Turning diameter over support 140 mm Turning length 550 mm Speed 125 - 2000 rpm Tip height 125 mm Spindle bore 26 mm Tailstock quill holder MK 2 MK Tailstock quill stroke 65 mm Connection voltage 230 V Total power requirement 0.8 kW Machine weight approx. 0.135 t Space requirement approx. 1.25 x 0.6 x 0.6 m Condition: never used / new (5) Auction-ID: A7-46460-428

REMA Battery Connector 220V plug Delivery by freight forwarder possible on request. Auction-ID: A1-45451-3441

Bench lathe 2-axis LCD digital display system. Longitudinal feed. 3-jaw chuck 125 mm. 4-jaw chuck 125 mm. Clamping plate. 4-way steel holder. Drip tray Hardened bed sheets. Emergency stop. Feed protection Set of wheels. Base cabinet is not included Suitable tools. Turning diameter over bed 250 mm Turning diameter over support 140 mm Turning length 550 mm Speed 50 - 2000 rpm Tip height 125 mm Spindle bore 26 mm Tailstock quill holder MK 2 MK Tailstock quill stroke 65 mm Connection voltage 230 V Total power requirement 1.1 kW Machine weight approx. 0.15 t Space requirements approx. 1.3 x 0.6 x 0.65 m Condition: never used / new (5) Auction-ID: A7-46460-408

Double mitre metal band saw, GBS 250 Super AutoCut - Mitre cuts up to 60° left and 45° right - Ball-bearing turntable - Quick-release vise - Massive, large material support - Automatic cooling Cutting range at 90 degrees: around 255 mm Cutting range at 90 degrees: square 240 mm Cutting area at 90 degrees: rectangle 300 x 180 Saw blade length 2,765 x 27 x 0.9 mm Table height 950 mm Belt speed 35 + 70 m/min Total power requirement 1.5/1.8 kW Machine weight approx. 0.42 t Dimensions approx. 1.23 x 1.7 x 1.75 m Condition: New Auction-ID: A7-46460-421

Internal number: 47023, Drive type: Diesel, Overall dimensions without tines (LxWxH): 3.7 m x 1.8 m x 1.9 m, Maximum lifting height: 5.6 m, Load at maximum height: 2,000 kg, Maximum forward reach: 3.3 m, Load at maximum reach: 800 kg, Operating weight without attachments: 5,010 kg, Fully glazed all-weather cab with adjustable seat Auction-ID: A1-46342-2

Disc diameter 350mm Speed 1400rpm Power: 1.8KW see pictures Auction-ID: A7-46460-558

Table lathe with base cabinet 2-axis LCD digital display system. Longitudinal feed. 3-jaw chuck 125 mm. 4-jaw chuck 125 mm. Clamping plate. 4-way steel holder. Drip tray Hardened bed sheets. Emergency stop. Feed protection Set of wheels. Suitable tools. Turning diameter over bed 250 mm Turning diameter over support 140 mm Turning length 550 mm Speed 50 - 2000 rpm Tip height 125 mm Spindle bore 26 mm Tailstock quill holder MK 2 MK Tailstock quill stroke 65 mm Connection voltage 230 V Total power requirement 1.1 kW Machine weight approx. 0.15 t Space requirement approx. 1.3 x 0.6 x 1.3 m Condition: never used / new (5) Auction-ID: A7-46460-566

Equipped with - 27 mm spindle passage - Adjustable guide tracks - Powerful motor with 0.75 kW - High resolution of the axis spindles for exact positioning - Attention without digital display Scope of delivery: 3-jaw chuck 100 mm, interchangeable wheel set, splash guard. Turning diameter over bed 250 mm Turning diameter over support 130 mm Turning length 700 mm Speed 115 - 1620 rpm Tip height 125 mm Spindle bore 27 mm Tailstock quill holder MK 2 Tailstock quill stroke 40 mm Metric threads 0.2 - 3.5 mm Thread - Inch 8 - 56 inch. Thread - Module 0.2 - 12.5 mm Swivel range +/- upper slide 45 ° Connection voltage 400 V Total power requirement 0.75 kW Machine weight approx. 0.15 t Dimensions approx. 1.41 x 0.61 x 0.41 m Condition: never used / new (5) Auction-ID: A7-46460-542

Rock-solid band saw - Double mitre cuts up to 60° on the right, up to 45° on the left - AutoCut - Vise with quick-release device - Belt tension control - Electr. Automatic cooling - Material stop max 600mm Cutting diameter 250 mm Saw blade length 3150 x 27 x 0.9 mm Table height 750 mm Cutting width 170 x 310 mm Cutting speed 25 - 90 m/min Cutting capacity at 60° around 130 mm Cutting capacity at 60° square 130 mm Cutting capacity at 45° Round 205 mm Cutting capacity at 45° square 205 mm Connection voltage 400 volts Total power requirement 1.5 kW Machine weight approx. 0.5 t Dimensions L x W x H 0.95 x 1.16 x 1.98 m Condition: never used / new (5) Auction-ID: A7-46460-533

This is a plot with approximately 60m2 of flat asbestos-free cement sheets dimensions: 250x110x0.6 cm Auction-ID: A1-40137-365

Slide size 1600x1200 mm Slide stroke 800 mm Opening between the posts 1400 mm Worktop size 1600x1300 mm Max mold size 1600x1200 mm DISMANTLING AND LOADING COST: EURO XXXXXXXXXX The cost does not include any disposal of the oils present in the system, this will be invoiced during disassembly Note: The functionality of the goods has not been verified. They are sold in their existing state, without warranty of operation. Auction-ID: A7-45789-14

4 pieces spruce/fir glue wood panel 18mm thick 2.50 x 1.20 m Auction-ID: A1-46501-991

Slide size 1850x1200 mm Slide stroke 460 mm Shots per minute 15-30 Opening between the uprights 1900 x1000 mm Worktop size 1850x1200 mm Revamping of the electrical system 2006 DISMANTLING AND LOADING COST: EURO XXXXXXXXXX The cost does not include any disposal of the oils present in the system, this will be invoiced during disassembly Note: The functionality of the goods has not been verified. They are sold in their existing state, without warranty of operation. Auction-ID: A7-45789-12

Please note, the first 3 photos are standard photos -> the actual package can be seen in the last photo(s). Please note, the package may contain pinholes. Auction-ID: A1-43752-16

KVH as good as new 80 x 120 x 2500mm 120 x 120 x 1700mm Auction-ID: A1-46501-2644

This is a plot with approximately 60m2 of flat asbestos-free cement sheets dimensions: 250x110x0.6 cm Auction-ID: A1-40137-364

Auction-ID: A7-46327-40

Around 6cm, 250cm long, unused Comes as a package Auction-ID: A1-40418-451

UV lamp for curing UV reactive adhesives Please note, the UVA filter and the protective grille are no longer available For operation, this must be procured as a spare part. UV bulb works. In wooden transport packaging Original price of the unit approx. 1800.00 EUR - spare parts maximum 200 EUR Auction-ID: A1-46501-2152

Equipped with - 27 mm spindle passage - Adjustable guide tracks - Powerful motor with 0.75 kW - High resolution of the axis spindles for exact positioning - Attention without digital display Scope of delivery: 3-jaw chuck 100 mm, interchangeable wheel set, splash guard. Turning diameter over bed 250 mm Turning diameter over support 130 mm Turning length 700 mm Speed 115 - 1620 rpm Tip height 125 mm Spindle bore 27 mm Tailstock quill holder MK 2 Tailstock quill stroke 40 mm Metric threads 0.2 - 3.5 mm Thread - Inch 8 - 56 inch. Thread - Module 0.2 - 12.5 mm Swivel range +/- upper slide 45 ° Connection voltage 400 V Total power requirement 0.75 kW Machine weight approx. 0.15 t Dimensions approx. 1.41 x 0.61 x 0.41 m Condition: never used / new (5)

Rock-solid band saw - Double mitre cuts up to 60° on the right, up to 45° on the left - AutoCut - Vise with quick-release device - Belt tension control - Electr. Automatic cooling - Material stop max 600mm Cutting diameter 250 mm Saw blade length 3150 x 27 x 0.9 mm Table height 750 mm Cutting width 170 x 310 mm Cutting speed 25 - 90 m/min Cutting capacity at 60° around 130 mm Cutting capacity at 60° square 130 mm Cutting capacity at 45° Round 205 mm Cutting capacity at 45° square 205 mm Connection voltage 400 volts Total power requirement 1.5 kW Machine weight approx. 0.5 t Dimensions L x W x H 0.95 x 1.16 x 1.98 m Condition: never used / new (5)

Bench lathe 2-axis LCD digital display system. Longitudinal feed. 3-jaw chuck 125 mm. 4-jaw chuck 125 mm. Clamping plate. 4-way steel holder. Drip tray Hardened bed sheets. Emergency stop. Feed protection Set of wheels. Base cabinet is not included Suitable tools. Turning diameter over bed 250 mm Turning diameter over support 140 mm Turning length 550 mm Speed 50 - 2000 rpm Tip height 125 mm Spindle bore 26 mm Tailstock quill holder MK 2 MK Tailstock quill stroke 65 mm Connection voltage 230 V Total power requirement 1.1 kW Machine weight approx. 0.15 t Space requirements approx. 1.3 x 0.6 x 0.65 m Condition: never used / new (5)

Double mitre metal band saw, GBS 250 Super AutoCut - Mitre cuts up to 60° left and 45° right - Ball-bearing turntable - Quick-release vise - Massive, large material support - Automatic cooling Cutting range at 90 degrees: around 255 mm Cutting range at 90 degrees: square 240 mm Cutting area at 90 degrees: rectangle 300 x 180 Saw blade length 2,765 x 27 x 0.9 mm Table height 950 mm Belt speed 35 + 70 m/min Total power requirement 1.5/1.8 kW Machine weight approx. 0.42 t Dimensions approx. 1.23 x 1.7 x 1.75 m Condition: New

Technical data Manufacturer: Overbeck Type: 250 RU Year of Make: 1984 Workpiece diameter max.: 100 mm Max. grinding length: 250 mm Tip height: 100 mm Grinding wheel: Ø 300 mm Max. workpiece weight: 12 kg Spindle speed workpiece: 150–1350 min⁻¹ Grinding spindle: 2040 / 2440 min⁻¹ Power: 4–7 kW Weight: approx. 1350 kg (net) Configuration Hydraulic table movement Internal cylindrical grinding device Collet holder DIN 6341 Swivelling workpiece and grinding headstock Manual and automatic delivery Hydraulic quick adjustment

Table lathe with base cabinet 2-axis LCD digital display system. Longitudinal feed. 3-jaw chuck 125 mm. 4-jaw chuck 125 mm. Clamping plate. 4-way steel holder. Drip tray Hardened bed sheets. Emergency stop. Feed protection Set of wheels. Suitable tools. Turning diameter over bed 250 mm Turning diameter over support 140 mm Turning length 550 mm Speed 50 - 2000 rpm Tip height 125 mm Spindle bore 26 mm Tailstock quill holder MK 2 MK Tailstock quill stroke 65 mm Connection voltage 230 V Total power requirement 1.1 kW Machine weight approx. 0.15 t Space requirement approx. 1.3 x 0.6 x 1.3 m Condition: never used / new (5)

Manufacturer :P ower Generation Model : C150D5 Power : 150KVA Engine: Cummins 6 cylinder turbo diesel Year of construction :2012 Hours:5900h RPM : 1500 U/Min. Frequency : 50 Hz Voltage : 230/400 volts Complete with control Auction-ID: A1-46031-14

Model : G550 Brand: JCB Scania Power : 440KW /550 KVA Engine: Scania 8 cylinder turbo diesel. Year of Make: 2010 Operating hours: approx. 6810h RPM : 1500 U/Min. Frequency : 50 Hz Auction-ID: A1-46031-1

Nitrogen generators membrane or PSA systems for laboratory up to production (500 L/h to several m3/h) No more gas cylinders in laboratory, plant or car repair shop (tyre gas)! Wear-free operation >99.5% pure nitrogen from mostly existing in-house compressed air Constant and safe gas generation guarantees reliable analytical results Operation-free 24-hour operation also in hazardous areas Safe operation due to low operating pressures Economically thanks to fast payback even on a technical scale! N2 production according to the membrane process The nitrogen generators continuously supply nitrogen up to a maximum purity of 99.5%. After the compressed air flows through highly effective filters, the compressed air is decomposed in a hollow fiber membrane module into a concentrated nitrogen flow and an oxygen-enriched portion. The membrane process has the great a ...

For sale we have a used Volvo generator set in a very good condition. Manufacturer : Atlas Copco Model : QAS 275 Power : 220KW/275KVA Engine: Volvo 6 cylinder turbo diesel Generator: Leroy Somer Year of construction :2011 RPM : 1500 U/Min. Frequency : 50 Hz Voltage : 230/400 volts Auction-ID: A1-46031-13

Model : 4008TAG2 Power : 824KW-1030KVA RPM : 1500 U/Min. Frequency : 50 Hz Voltage : 230/400 volts Engine: Perkins 8Cylinder Turbo Diesel Operating hours:approx. 600h Year of Make: 2005 Auction-ID: A1-46031-2

Condition: New Brand: Cummins Model : C110D5 Power : /88KW/110KVA Engine: Cummins 6 cylinder turbo diesel Year of construction :2022 Operating hours:00h RPM : 1500 U/Min. Frequency : 50 Hz Voltage : 230/400 volts Auction-ID: A1-46031-12

Condition: Good Model : HFW-160 T5 STD Brand: Himoinsa Power : 127,4 KW /159 KVA Engine: Iveco FPT 6 cylinder turbo diesel. Year of Make: 2014 RPM : 1500 U/Min. Frequency : 50 Hz Voltage : 230/400 volts Auction-ID: A1-46031-9

Only about 35h hours! Olympian Caterpillar Perkins 200 KVA Emergency Power Generator Generator 160 KW Power Generator Auction-ID: A1-46031-4

Robust diesel generator with soundproofing on sled. 3-phase generator with harmonized arousal. Technical data: - Rated power 30 KVA - Diesel 495D, 4 cylinder water-cooled, 33.0 kW/45 hp - Consumption average 258 g/kWh - Electric start - Current 43.3 A - Frequency 50 Hz - Voltage 220V/3x400V - Cable outlet 40A with 20 m PUR cable 3PNE, circuit breaker 3phase, Operating hour counter - ATS (Automatic Transfer Switch) with automatic start repetition, Activation of the current cover, automatic shutdown in case of lack of oil pressure, Overheating, excessive speed - slide with 4 lifting eyelets, length approx. 2300mm, width approx. 1300 mm, height approx. 1600 mm, Weight approx. 900 kg Option at extra cost: - Distributor swells with suitable sockets at the end of the cable - Suspension Warranty: 2 years on all non-wear parts or 2000 operating hours, which is m ...

Power: 150 kVA / kW 120 Diesel engine / type: DEUTZ / BF6M1015 Cylinder: V 6 Cooling: liquid-cooled Generator / type: SIEMENS / 1FC2-282 Voltage: 400 / 231 V or 415 / 240 V Frequency: 50 Hz Speed: 1500 rpm Type: mobile complete unit with the silencer hood on dual trailer vehicle, dual circuit compressed air brake system Tank: approx. 450 litres Switchgear / Starter: Automatic start-stop for mains replacement Battery voltage / capacity: 24 V / 2 x 143 Ah Generator switch: Yes Accessories: Sockets 220 V / 400 V, spare wheel Dimensions (L X W X H): approx. 6000 X 2200 X 3300 mm Weight: approx. 8000kg