gas gen set used for sale

Axial fan set, axial fan, with accessories EBM PAPST 2x TYPE: 4650N 2x TYPE: 4656N 19 Watt 230 V 1AC 50 / 60 Hz 2x Protective grille: 0001895 Diameter: Ø 120 mm 2x Fan connection cable: LAK 150 Art.-Nr.: 40984 Length: 1.5 m New, with documents ! Dimensions ( fan ): 119 x 119 x 38 mm Dimensions ( packaging ): 245 x 205 x 100 mm

Axial fan, axial fan set EBM PAPST 4656 N Blade diameter: 110 mm Installation dimensions: 119 x 119 x 38 mm 19 / 18 W 230 V 50 - 60 Hz Price is for 2 pcs New Dimensions: 120 x 120 x 80 mm

Optical gauge blocks, gauge blocks, reference standard MITUTOYO Series 157 Code No.: 157-903 157 - 101, 102, 103, 104 4 parts in plastic box New ! Dimensions: 170 x 90 x 35 mm

Surface comparison plate set, roughness dimensions MASSI planing, end milling, turning TGL 4763 planing: Rz 6,3 μm - Rz 160 μm Face milling: Rz 6.3 μm - Rz 80 μm Turning: Rz 3.2 μm - Rz 80 μm in 3 wooden boxes used, tested ! Dimensions: 345 x 125 x 105 mm

Laboratory thermometer set, 12 laboratory thermometers MLW Laboratory thermom - N possible temperature range: -85 °C - + 300 °C Immersion depth: 75 mm diameter Immersion range: Ø 7,5 mm Dimension (single thermometer): approx. 390 x 10 x 10 mm in wooden box laboratory thermometer set consists of 12 thermometers with different temperature ranges! New! Wooden box with traces of storage ! Dimensions: 480 x 230 x 45 mm

Thread gauge ring set, pipe thread 1x good gauge ring and 1x scrap gauge ring PAGUS G 1/2 Gut gauge ring: Ø 54 x 16 mm scrap gauge: Ø 54 x 12 mm used, tested ! Dimensions: 60 x 60 x 30 mm

Thread gauge ring set, 4 pcs. threaded good gauge rings, left-hand thread PAGUS M 6 - M 12 M 6: Ø 32 x 7 mm M 8: Ø 30 x 8 mm M 10: Ø 32 x 10 mm M 12: Ø 38 x 13 mm used, tested ! Dimensions (set): 40 x 40 x 40 mm

Tailstock, 2 pieces, with collet set PAGUS center height: 50 mm for T-slot 8 / 10 mm Dimensions(single tailstock): 110 x 65 x 70 mm 13 collet pairs: Ø 1.0 mm - 7.0 mm, rising by 0.5 mm Dimensions(single collet): Ø 10 / 16 x 46 mm im Holzkasten used, tested ! Dimensions: 320 x 220 x 100 mm

Measuring tool set, 6 pieces GARANT DIN874 / DIN 875 1x Hair ruler No. 460095 size 100 1x Hair Angle No. 4 50010 Size 75 x 50 1x each Cutmaker hair angle No. 450040 Size 25 x 20 and size 40 x 28 1x gauge size marking tip 60×8×8 mm 1x stop angle, Accuracy 0, 150 x 100 mm 2x wooden box used, tested ! Dimension ( wooden box 1 ): 178 x 115 x 32 mm dimension ( wooden box 2 ): 180 x 135 x 40 mm

Height substructure for compact clamps, clamping device OSSMANN - WERKZEUG OS3 Height extension: 126 mm Groove width: 14 / 27 mm Groove depth: 18 mm Set consists of two parts ! New ! Dimensions(single height substructure): 104 x 42 x 145 mm

Foil set HASBERG Size: 100 x 500 3 x 0.1 mm 4 x 0.3 mm 5 x 0.4 mm 3 x 0.5 mm Stainless ! New ! Dimensions(packed): 515 x 115 x 70 mm

Shrink chuck set, shrink chuck GARANT 302235 SK 40 Tool: Ø 3 / 4 / 5 / 6 / 7 / 8 / 10 / 12 mm Balancing quality ( G ): 2.5 at 25000 rpm cantilever length ( A-dimension ): 80 mm used, tested ! dimensions ( single shrink chuck ): 150 x Ø 64 mm Dimensions (packed): 300 x 190 x 70 mm

Shrink chuck set, shrink chuck GARANT 302352 SK 40 Tool: Ø 3 / 4 / 6 / 8 mm Balancing quality ( G ): 2.5 at 25000 rpm Cantilever length ( A-dimension ): 80 mm used, tested ! dimensions ( single shrink chuck ): 150 x Ø 64 mm Dimensions (packed): 250 x 170 x 70 mm

Shrink chuck set, shrink chuck GARANT 302356 SK 40 Tool: Ø 3 / 4 / 6 / 8 mm Balancing quality ( G ): 2.5 at 25000 rpm Cantilever length ( A-dimension ): 120 mm used, tested ! dimensions ( single shrink chuck ): 190 x Ø 64 mm Dimensions (packed): 250 x 200 x 70 mm

Shrink chuck set, shrink chuck GARANT 302325 SK 40 Tool: Ø 3 / 4 / / 5 / 6 / 8 mm Balancing quality ( G ): 2.5 at 25000 rpm Cantilever length ( A-dimension ): 120 mm used ! Dimensions ( single shrink chuck ): 190 x Ø 64 mm Dimensions ( packed ): 320 x 200 x 70 mm

Shrink chuck set, shrink chuck GARANT 302240 SK 40 tool: Ø 3 / 6 / 8 / 10 mm Cantilever length ( A-dimension ): 80 mm used, tested ! Dimensions ( single shrink chuck ): 150 x Ø 64 mm Dimensions ( packed ): 250 x 150 x 70 mm

Shrink chuck set, shrink chuck GARANT 302325 SK 40 Tool: Ø 2x 3 / 4 / 5 / 8 mm 302235 SK 40 Tool: Ø 12 mm Balancing quality ( G ): 2,2,5 at 25000 rpm usable length: 120 mm used ! dimensions (single shrink chuck): 190 x Ø 64 mm Dimensions (packed): 320 x 200 x 70 mm

Shrink chuck set, shrink chuck GARANT 302235 SK 40 Tool: Ø 2x 3 / 4 / 5 12 mm Balancing quality ( G ): 2.5 at 25000 rpm usable length: 80 mm used, tested ! Dimensions ( single shrink chuck ): 150 x Ø 64 mm Dimensions ( packed ): 300 x 140 x 70 mm

Shrink chuck set, shrink chuck POKOLM 75 Ø 750 S SK 40 tool: Ø 6 / 8 / 10 / 12 /16 mm usable length: 75 mm used, tested ! Dimensions ( single shrink chuck ): 163 x Ø 64 mm Dimensions ( packed ): 330 x 210 x 70 mm

Shrink chuck set, shrink chuck POKOLM 50 Ø 750 S SK 40 Tool: Ø 3 / 4 / 6 / 8 / 10 / 12 / 16 mm Usable length: 50 mm used, tested Dimensions ( single shrink chuck ): 138 x Ø 64 mm Dimensions ( packed ): 300 x 280 x 70 mm

Shrink chuck set, shrink chuck GARANT 302332 SK 40 Tool: Ø 3 / 4 / 5 / 6 / 8 / 10 / 12 mm Balancing quality ( G ): 2.5 at 18000 rpm usable length: 100 mm used, tested ! Dimensions ( single shrink chuck ): 188 x Ø 64 mm Dimensions (packed): 360 x 280 x 70 mm

Shrink chuck set, shrink chuck HOLEX 302265 SK 40 Tool: Ø 8 / 10 / 12 mm Balancing quality ( G ): 2.5 at 18000 rpm effective length: 80 mm used, tested ! Dimensions ( single shrink chuck ): 148 x Ø 64 mm Dimensions ( packed ): 300 x 140 x 70 mm

Mounting kit SMC 4x RHC-L032 2x RHC-F032 for high-performance cylinders, RHC series, piston diameter: Ø 32 mm New ! Dimensions ( packaging ): 150 x 90 x 70 mm

Set of 5 feed rollers for gathering machine c.p. bourg AE 10/15/30/46 (black) Manufacturer number 9260011, 9260148 Art.: PS5062

Hose connection set, 8 pieces PAGUS 1/2 ( inch ) 1x elbow hose connector 1/2 ( inch ) Hose diameter ( inside ): Ø 13 mm, material: PVDF < br /> 1x threaded grommet G 3/8 ( inch ) hose diameter ( inside ): Ø 13 mm, material: PVC-U 2x screw-on hose nozzle G 3/8 ( inch ) hose diameter ( inside ): Ø 13 mm, material: brass 2x sealing ring: Ø 17 / 22 mm, material thickness: 1.5 mm Other quantities on request ! New ! Dimensions ( packaging ): 150 x 100 x 80 mm

Indicator set PARKER PXV-F141 80342 max. 8 bar Indicator set consists of 2 indicators ! New ! Dimensions(single indicator): 75 x 35 x 30 mm Dimensions: 150 x 70 x 30 mm

Throttle Check Valve Set, Speed Regulator, Speed Controler TELEMECANIQUE PWRA1833 080982 1 - 10 bar Control line connection: G 3/8 Threaded connection: G 3/8 Throttle check valve set consists of 2 valves ! unused ! Dimensions(single throttle check valve): 70 x 62 x 30 mm Dimensions: 150 x 70 x 35 mm

Throttle Check Valve Set, Speed Regulator, Speed Controler PARKER PWR-A1483 80956 1 - 10 bar Control line connection: 8 mm Plug-in connection Threaded connection: G 3/8 Throttle check valve set consists of 2 valves ! unused !; Dimensions(single throttle check valve): 65 x 65 x 30 mm Dimensions: 120 x 70 x 30 mm

Logic element set, AND valve PARKER, TELEPNEUMATIC PLL-B12 080052, 80052 Set consists of 2 valves ! New ! Dimensions(single AND valve): 66 x 26 x 30 mm Dimensions (packaging): 75 x 70 x 35 mm

Throttle Check Valve Set, Speed Regulator, Speed Controler PARKER, TELEPNEUMATIC PWRA1458 080950 1 - 10 bar Control line connection: 4 mm Plug-in connection Threaded connection: G 1/8 Throttle check valve set consists of 3 valves ! unused ! Dimensions(single throttle check valve): 45 x 45 x 20 mm Dimensions: 60 x 60 x 80 mm

Logic element set, branch block TELEMECANIQUE PSDA12 080211 Set consists of 3 branch blocks ! New ! Dimensions(single branch block): 65 x 50 x 30 mm Dimensions: 100 x 80 x 70 mm

Solenoid valve set TELEMECANIQUE PVA-E 201 M PVA-E 101 M 81383 200 - 220 V 50 / 60 Hz Solenoid valve set consists of 2 valves unused !; Dimensions(single solenoid valve): 90 x 65 x 32 mm Dimensions: 100 x 80 x 70 mm

Check valve set, check valve, line check valve CROUZET 81 529 901 P: 2 - 8 bar Sclauch outer diameter: Ø 4 mm check valve set consists of 4 valves ! unused ! Dimensions(single check valve): 40 x 12 x 12 mm Dimensions: 40 x 50 x 20 mm

Pressure regulator set, pressure regulator with pressure gauge NUMATICS R22RG03H 0 - 12 bar Threaded connection: G 3/8 Pressure regulator set consists of 2 pressure regulators ! New ! Dimensions(single pressure regulator): 90 x 60 x 110 mm Dimensions: 180 x 60 x 110 mm

Pressure regulating valve set, differential pressure regulating valve PARKER PWP-B1289 9944 1 - 8 bar Connection of the control cable: 8 mm Plug-in connection Threaded connection: G 1/4 Pressure regulating valve set consists of 2 valves !; New ! Dimensions(single pressure regulating valve): 65 x 50 x 25 mm Dimensions: 130 x 60 x 65 mm

Pneumatic cylinder set, short-stroke cylinder, double-acting REXROTH MECMAN PNEUMATICS 270-052-015-0 stroke: 15 mm rod diameter: Ø 10 mm pmax: 8 bar Pneumatic cylinder set consists of - 2 cylinders ! with anti-twist piston rod and two elbow fittings each with plug-in connection New Dimensions(single cylinder): 54 x 36 x 37 mm Dimensions: 60 x 80 x 40 mm

Pneumatic cylinder set, short-stroke cylinder, double-acting REXROTH MECMAN PNEUMATIK 270-052-015-0 stroke: 15 mm rod diameter: Ø 10 mm pmax: 8 bar Pneumatic cylinder set consists of - 2 cylinders ! with anti-twist piston rod and two standard fittings each with plug-in connection New Dimensions(single cylinder): 54 x 36 x 37 mm Dimensions: 60 x 80 x 40 mm

Fittings with plug-in connection REXROTH MECHMAN Series QR1 Standard 10 x straight fitting 212 100 614 0 10 x elbow fitting 212 200 614 0 thread: G1/4 hose diameter: Ø 6 mm fitting set consists of - 20 fittings ! New ! Dimensions: 60 x 60 x 65 mm

Fittings with plug-in connection REXROTH MECHMAN Series QR1 Standard 10 x straight fitting 212 100 405 0 10 x elbow fitting 212 200 405 0 thread: M5 hose diameter: Ø 4 mm fitting set consists of - 20 fittings ! New ! Dimensions: 60 x 60 x 65 mm

Check valve set REXROTH MECHMAN 254 010 405 1 Thread: M5 hose diameter: Ø 4 mm check valve set consists of - 10 valves ! unused ! Dimensions: 80 x 70 x 20 mm

Check valve set REXROTH MECHMAN 254 010 605 1 Thread: M5 Hose diameter: Ø 6 mm check valve set consists of - 10 valves ! unused ! Dimensions: 140 x 100 x 50 mm

Check valve set REXROTH MECHMAN 254 010 818 1 Thread: G1/8 Hose diameter: Ø 6 mm check valve set consists of - 10 valves ! unused ! Dimensions: 140 x 100 x 50 mm

Clamp holder set for sensors on short-stroke cylinders REXROTH MECHMAN 275 211 200 0 01 W 23 for short-stroke cylinders series 2709 Clamp holder set consists of - 20 clamp holders ! New ! Dimensions(single holder): 31 x 14 x 10 mm Dimensions: 300 x 200 x 20 mm

Fastening set SMC 4x CG-L025 7x CG-F025 for high-performance cylinders, RHC series, piston diameter: Ø 25 mm New ! Dimensions ( packaging ): 140 x 120 x 40 mm

Fittings with plug-in connection REXROTH MECHMAN Series QR1 Standard 18 x elbow fitting 212 200 418 0 Thread: G1/8, hose diameter: Ø 4 mm 18 x straight fitting 212 100 618 0 thread: G1/8, hose diameter: Ø 6 mm 18 x straight fitting with internal thread 212 190 618 0 thread: G1/8, hose diameter: Ø 6 mm fitting set consists of - 54 fittings ! New ! Dimensions: 60 x 60 x 100 mm

Connector REXROTH MECHMAN Series QR1 Standard 9 x T-connector, hose diameter: Ø 4 mm 212 110 400 0 24 x T-connector, hose diameter: Ø 4 mm 212 110 600 0 34 x straight plug-in connection, reduce, hose diameter: Ø 8 / 4 mm 212 170 806 0 fitting set consists of - 67 connectors ! New ! Dimensions: 160 x 160 x 60 mm

Fittings with plug-in connection REXROTH MECHMAN Series QR1 Standard 8 x straight fitting, thread: G1/4, hose diameter: Ø 6 mm 212 100 614 0 2 x angle fitting, thread: M5, hose diameter: Ø 4 mm 212 200 405 0 4 x check valve, Thread: M5, hose diameter: Ø 4 mm 254 010 405 1 9 x elbow fitting, thread: G1/4, hose diameter: Ø 6 mm 212 200 614 0 16 x straight fitting, thread: M5, hose diameter: Ø 6 mm 212 100 605 0 12 x straight fitting, thread: M5, Hose diameter: Ø 4 mm 212 100 405 0 fitting set consists of - 20 fittings ! New ! Dimensions: 140 x 100 x 50 mm

Reinforcement sleeve set PAGUS VSH 15 x 12 Inner diameter: Ø 12 mm outer diameter: Ø 15 mm Hull diameter: Ø 13.5 mm Sleeve length: 18 mm Material: Brass Reinforcement sleeve set consists of 100 pieces ! New ! Dimensions: 150 x 100 x 50 mm

Push-in fitting set FESTO CRQS-M5-4 162860 Connection 1: M5 (male thread) Connection 2: Ø 4 mm (for hose, outer diameter) Material: high-alloy steel, stainless Plug-in fitting set consists of 6 pieces ! New ! Dimensions (set): 100 x 80 x 20 mm

L-Plug-in fitting set FESTO CRQSL-M5-4 162870 Connection 1: M5 (male thread) Connection 2: Ø 4 mm (for hose, outer diameter) Material: high-alloy steel, stainless L push-in fitting set consists of 4 pieces ! New ! Dimensions(set): 100 x 80 x 20 mm