gas gen set used for sale

set of machines to manually produce hard covers etc. set consists of: - Record 54 - gluer, warm and cold glue, working width 54 cm - Rimbo 110 - double turning in station, working width 110 cm - Ottima 74 - nip roller press, working width 74 cm - Schmedt Prädeck - board positioning table, 60x40cm (extension possible)

number: 77 Positionen weight: 146 kg condition: neu : 28 mm Set 3: 77 pieces, 28mm system, consisting of: Ferrules: 10 x 280610.N Ferrules: 6 x 280630.N Prism: 4 x 280648.1.N Bolt: 24 x 160511 Magnetic bolts 4 x 280740 Stop: 8 x 280410.N Stop: 8 x 280420.N Angle: 6 x 160110.N Angle: 2 x 280152.N Angle: 2 x 280162.N Angle: 1 x 280166.N Angle: 1 x 280167.N Accessory set. 1 x 283999 Price information plus packaging and transport. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

number: 24 Positionen weight: 22 kg condition: neu 0 Basic set 1 / 24 pieces for table top thickness 15 and 25mm 4 clamps, clamping height 300mm, variable projection 8 clamping bolts 2 pieces stop 100mm 4 pcs. stop 150mm 2 pieces stop 225mm 1 piece torch holder 1 piece perforated brush 30mm 1 piece Separating Lotion 500ml 1 pc. Welding table cleaner on a natural, biological basis 500ml The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

number: 31 Positionen : 22 mm condition: neu weight: 43 kg Set 1 33-piece, 22mm system, consisting of: Clamps: 4 x 220610.1 Clamps 2 x 220630.1 Bolt: 12 x 220511 Stop: 4 x 220410.N Stop: 4 x 220420.N Angle: 2 x 220110.N Angle: 2 x 220152.N Accessory set. 1 x 223999 Price plus packaging and transport. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

number: 37 Positionen : 28 mm condition: neu weight: 29 kg Basic set 1 37 pieces, 28mm system, consisting of: Clamps: 4 x 280604 Bolt: 8 x 280511 Stop: 6 x 280420.N Angle: 2 x 280110.G Threaded bolt 8 x 280543 Stop 8 x 160415 Accessory set. 1 x 163999 Price plus packaging and transport. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

number: 70 Positionen weight: 90 kg condition: neu : 28 mm WMT Set 7: 70-piece, 28mm system, consisting of: 3x Pipe clamps D28 90° – Item No. 4028397 3x Pipe clamps D28 180° – Item No. 4028396 3x Pipe clamps D28 45° – Item No. 4028398 3x Pipe clamps D28 300x150 – Item No. 4028399 3x Pipe clamps D28 300x200 – Item No. 4028400 15x Ball lock pins D28x50 – Item No. 4027663 10x Locking pins D28x80 – Item No. 4028876 4x Universal Stop D28 100x50x25 mm – Item No. 4028469 4x Universal Stop D28 150x50x25 mm – Item No. 4028470 4x Universal Stop D28 225x50x25 mm – Item No. 4027657 2x Universal Stop D28 300x50x25 mm – Item No. 4027659 2x Stop Clamping Angle D28 75x50x75x25 mm – Item No. 4028657 2x Stop Clamping Angle D28 175x50x75x25 mm – Item No. 4028658 2x Stop Clamping Angle D28 175x50x175x25 mm – Item No. 4028649 2x Stop Clamping Angle D28 175x50x75x25 mm – Item  ...

collets: 3 - 20mm tool taper: Sk 40 weight: 4,5 kg dimensions: 350 x 250 x 100 mm Collet set consisting of: A box of 18 pcs collets for 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 16, 17, 18, 19, 20mm. and a box with collet holder and key The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 2400 mm table width: 1200 mm table height (lateral area): 100 mm weight: 537 kg SIEGMUND authorized dealer - all items available! Product description - high quality steel S355J2 + N + plasma nitriding - Material thickness approx. 11.5 - 13 mm - Hole Ø 16 mm - Holes surface 50x50 mm grid - Rounded corners, edges and holes - Height of side wall 100 mm - Distance between holes in side wall 25 mm - Including scaling on the surface - Construction reinforced by ribs - Grid lines enable precise structures The welding tables are provided with a scale as standard. Special set - including tool set of 16 3 Plasma nitrided version: - Protection against rust / scratches / weld spatter adhesion - more corrosion-resistant / higher load capacity Furnishing: - 16 hole pattern / dimensions 2400 x 1200 x 100 mm - Plasma nitrided version with scale - including 6x base equipment - incl. 16 t ...

table length: 2000 mm table width: 1000 mm table height (lateral area): 100 mm weight: 354 kg SIEGMUND authorized dealer - all items available! Product description - high quality steel S355J2 + N + plasma nitriding - Material thickness approx. 11.5 - 13 mm - Hole Ø 16 mm - Holes surface 50x50 mm grid - Rounded corners, edges and holes - Height of side wall 100 mm - Distance between holes in side wall 25 mm - Including scaling on the surface - Construction reinforced by ribs - Grid lines enable precise structures The welding tables are provided with a scale as standard. Special set - including tool set of 16 3 Plasma nitrided version: - Protection against rust / scratches / weld spatter adhesion - more corrosion-resistant / higher load capacity Furnishing: - 16 hole pattern / dimensions 2000 x 1000 x 100 mm - Plasma nitrided version with scale - Including 4x basic equipment - incl. 16  ...

conveying height: 2,5 Meter coolant capacity: 8,0 l/min 0: 11,0 ltr. motor: 400 Volt range L-W-H: 370 x 245 x 170 mm Furnishing: - with plastic container (10 liters) and flexible hose - 230 V connection The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

For sale is a Perfactory 4 LED Standard XL SET A precise and reliable 3D printer for industrial applications. The machine is particularly suitable for use in jewelry, dental, and prototype production, where high levels of detail and surface quality are crucial., Technical highlights:, - Model: Perfactory 4 LED Standard XL, - Technology: DLP (Digital Light Processing), - Light source: High-performance LED for long life and stable exposure, - Construction volume: Large print volume for versatile applications (XL version), - Resolution: Finest details down to the micrometer range, - Operation: User-friendly interface, quick material changes, Advantages:, - Low operating costs thanks to long-lasting LED technology, - Precise print quality for demanding applications, - Robust and reliable for daily use, - Ideal for series production of small components and prototypes, Condition:, - Used, good ...

General SKU418W1321 MakeQVF Engineering GmbH LocationBarneveld TypeDN400 Main Features MaterialGlass Specified Features - Separator Separatorcheck Separators Capacity210 l. Specified Features - Separator MaterialGlass General No.40608124/5650 Mach.No.GT67691 Year of construction2006 Floorspace0,6x1,8 m Floor space0,6x1,8 m Total height0,7 m Weight220 kg Extra SpecificationsInlet dia. 50mm, outlet dia. 50 mm, with overflow valve outlet dia. 80mm, coalescence separator with 6 elements L=540mm,allowable pressure -1/+0,5 bar, allowable temperature 160°COils & fatGeneric medicinesBiotechnologyFeed additivesCosmeticsFood additivesLubricants & oleoDairySolid pharmaceuticsSeparatorsBeveragesDyes & pigmentsBiopharmaceuticalAPIQVF GlasstechnikIndustries > Food & Feed > Oils & fatIndustries > Pharmaceutical > Generic medicinesIndustries > Chemical > BiotechnologyIndustries >  ...

General SKU252X217 MakeAlfred Bolz TypeEB-1306-00 No.35897-1 Year of construction2007 Mounted on framecheck Specified Features - Candle filter Material finishHalar coating Pressure Working pressure1.2 Bar Number of vertical pressure tanks1 Main Features MaterialStainless steel Volume240 Ltr. Pressure1.2 Bar Specified Features - Candle filter Capacity240 l. Vessel sizesDia. 600x900 mm Dished bottomcheck With covercheck Top connectionscheck Outletcheck Max. temperature-25°C-+50°C Candle filters MaterialStainless steel 1.4404 (316L) General LocationBarneveld Floorspace0,90x0,60 m Total height6,0x1,20 m Weight650 kg CEcheck Extra SpecificationsWith QVF mobile glas bowl, volume 20 l., pressure -1/+2 bar, allowable temperature 120°C,3x Adfiltec, candle filters on mobile frame, pressure-1/2 bar, allowable temperature-50°C/+200°C,Endress+Hauser filter with f ...

General SKU332X710 MakeNormag No.A 1303606 Year of construction2014 Mounted on framecheck Pressure Working pressure0.6 Bar Vacuum possiblecheck Working pressure jacket2 Bar Vacuum possible jacketcheck Vacuum possible shellcheck Technical specs Max. temperature200 °C Specified Features - Distillation Distillation installationcheck Capacity1260 l. totall Column sizesDia. 600x4500 mm Number of columns:1 Max. temperature0/+200°C With condenserNormag 350GS1-300H-150-100-2 Heating surface35m² Condenser sizesDia. 400 x 3224 mm With receiving flaskcheck MaterialBorosilicate Glass 3.3 General LocationBarneveld Floorspace4,35x2,38 m Total height5,05 m ATEX designedcheckOils & fatFine chemicalsOther chemicalSolventsDistillationDetergent & surf.Other pharmaceuticsLubricants & oleoBeveragesAPINormagIndustries > Food & Feed > Oils & fatIndustries > Chemical > Fine chem ...

Dimensions (L/W/H): 2500x2100x1800 mm Weight: 1700 kg Total power requirement: 7,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

General SKU212T101 MakeKuehni LocationBarneveld TypeMixer setler column Pressure Working pressure3.2 Bar Vacuum possiblecheck Main Features MaterialStainless steel Volume6380 Ltr. Motor2.2 KW Specified Features - Extraction Extractorcheck Capacity6380 Ltr. Diameter910 mm Length10175 Max. temperature-10/200°C With rotorcheck Motor2,2kW, 230/400 Volt, 1420 rpm( EX) Rotor speed42 rpm MaterialStainless steel 1.4571 (316Ti) General No.2046 Year of construction2001 Floorspace1.6x1.6 m Total height11.85 m Weight2920 kg ATEX designedcheckOils & fatFine chemicalsBiotechnologyAgrochemicalsFeed additivesCosmeticsFood additivesLubricants & oleoAnimal feedOther feedBiopharmaceuticalExtractionKuehniIndustries > Food & Feed > Oils & fatIndustries > Chemical > Fine chemicalsIndustries > Chemical > BiotechnologyIndustries > Chemical > AgrochemicalsIndustries > Food & Feed >  ...

COMPLETE LOT SPECIFICATIONS - 2x Fanuc R2000iB 165F industrial robots with RJ3iC controllers - 2x Gudel 8 metre linear tracks with bellows fully integrated - 2x HSD 8kW automatic tool change spindles, Year 2022.Inverters, cables, and full integration included Find more here - .ucymachines/ Contact us at - sales@ucymachines

Watervalve set, previously used for a GEA Westfalia MSD 130-01-076., Type of Machine: Watervalve set

drawer runner, telescopic runner, drawer pull-out, drawer runners, drawer pull-out, Telescopic rails, pull-out rails, heavy-duty pull-out, side rails, front pull-out, drawer side rails, 2-side rectangular rails -Manufacturer: Grass, NP 2-side rectangular railing set -Type: 7607/400/2S-RER-SET/9006/1 -Item no.: F102045860 -Length 400 mm -Quantity: 1x set available -Transport dimensions: 400/100/H40 mm -Weight: 0.4 kg/set

Drawer slide, telescopic slide, drawer extension, drawer rails, drawer extension, Telescopic slides, extension slides, heavy-duty extension slides, side rails, front extension slides, drawer side rails, 2-sided rectangular rails, front support -Manufacturer: Grass, NP 2-S-RER Front Support Set Original Packaging -Type: 7607/550/2S RF SET/9006/1 -Item No.: F102048036101 -Length 550 mm -Quantity: 5 sets available -Price: per set -Dimensions: 550/150/H40 mm -Weight: 0.5 kg/set

Overview The crater was manufactured and taken into operation in 2018 by the German company Sema Maschinenbau GmbH. Till now it was used in a filling line for fresh milk in glass bottles in a German dairy company. The line capacity was 7,700 bph. As the request for milk in bottles was increasing during the lat year, the owner decided to purchase a new line with increased capacity. Therefore this machine has become available. The machine is still in very good condition, as it is still young and only with a low number of operating hours.   Tech Specs: Capacity: 695 crates (of 12 bottles) per hour  1333 crates (of 6 bottles) per hour Formation: 2x3 (1l bottle) 4x6 (0,5l bottle) Gripper heads: for wide bottle neck (can be adapted)    

Schmedt PraForm 21-50 joint-setting press - Lidograf printing machines Menu Home About us Offer Gallery We buy Contact en pl Schmedt PraForm 21-50 joint-setting press Search: Search Technical condition: New Used Categories: Bookbinding machinery Bookletmakers Box production Collators Creasers Die Cutting Machines Folding machines Gluing machines Guillotines Joggers Laminators Offset printing machinery Others Paper drills Perfect binders Pile turners Spare parts Stitching machines Schmedt PraForm 21-50 joint-setting press Price: 13750 EUR Download PDF Schmedt PraForm 21-50 joint-setting press Book press with a joint forming. Production Schmedt, Germany. The machine is in very good condition, ready for production. Technical data: max format: 450 x 520 x 100 mm Weight 264kg Power supply 230V + compressed air. Ask About The Product Name (required) Company name Email (required) Phone Message  ...

: 0,6 t : -- mm : -- mm consisting of: 30x article no. 2-280510 Quick release pin short - Clamping of 2 components - burnished - with twist lock 8x article no. 2-280410.N Universal stop 150 L - nitrided - nitrided - as standard with fine scaling on both sides 4x article no. 2-280420.N Universal stop 225 L - nitrided - nitrided - as standard with fine scaling on both sides 8x article no. 2-280110.G Stop and clamping angle 175 L - cast / black oxide finish - Hole / elongated hole - Cast / burnished 2x article no. 2-280162.N Stop and clamping angle 500 G - nitrided - Left stop - nitrided 1x article no. 2-280166.N Stop and clamping angle 750 G left - nitrided - Left stop - nitrided 1x article no. 2-280167.N Stop and clamping angle 750 G right - nitrided - stop on the right - nitrided 1x article no. 2-280910 Tool trolley - painted - Permissible total weight 240 kg 1x article no. 2-280164.N S ...

table length: 3000 mm table width: 1500 mm table height: 850 mm side-clamping surface:: 200 (Höhe) mm weight: 1518 kg SIEGMUND authorized dealer - all items available! Product description - high quality steel S355J2 + N + plasma nitriding - Material thickness approx. 24.5 - 27 mm - Hole Ø 28 mm - Drilling surface 100x100 mm grid - Rounded corners, edges and holes - Height of side wall 200 mm - Distance between holes in side wall 50 mm - Including scaling on the surface - Construction reinforced by ribs - Grid lines enable precise structures The welding tables are provided with a scale as standard. Special set - including 28 tool set 3 Plasma nitrided version: - Protection against rust / scratches / weld spatter adhesion - more corrosion-resistant / higher load capacity Furnishing: - 28 hole pattern / dimensions 3000 x 1500 x 200 mm - Plasma nitrided version with scale - incl. 6x base ...

Fresh Spritzmatic Universal machine Stainless steel version 1 material container Water purification Machine mobile Connection 400V, 32A-CEE plug Used device

weight max.: 5000 kg workpiece diameter: 250 - 2500 mm total power requirement: 0,75 kW table turning speeds: 100 - 1000 mm/min diameter of running wheel: 250 x 140 mm weight of the machine ca.: 800 kg range L-W-H: 2200 x 2500 x 800 mm - For machining cylindrical workpieces - Flat frame - Castors with polyurethane coating - Clear controls - Infinitely variable speed - The control electronics are of a robust and closed housing protected - With foot switch for start/stop - Drive with DC electric motors and gears The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 2400 mm table width: 1200 mm table height (lateral area): 200 mm weight: 1069 kg dimensions of the machine ca.: 2400 x 1200 mm SIEGMUND authorized dealer - all items available! The welding tables are provided with a scale as standard. Special set - including 28 tool set 3 Product description - Through hardened tool steel X8.7 + plasma nitriding - Material thickness approx. 24.5 - 27 mm - Sidewall made of high quality steel S355J2 + N + plasma nitriding - Hole Ø 28 mm - Surface holes in a diagonal grid - Rounded corners, edges and holes - Height of side wall 200 mm - Drill holes in the side wall in a diagonal grid - Including scaling on the surface - Construction reinforced by ribs - Grid lines enable precise structures Plasma nitrided version: - Protection against rust / scratches / weld spatter adhesion - more corrosion-resistant / higher load capacity Furnishing: - 28  ...

number: 32 bore: 28 mm weight: 51,2 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore: 16 mm weight: 86 kg 4-163400 Consisting of: - 10x Professional screw clamp, burnished/nitrided - 4x Professional screw clamp 45°/90°, burnished - 8x Vario Prisma Ø 50 90°/120° with screwed-in collar, nitrided - 30x quick-release bolts without groove, double burnished - 8x universal stop 80 L, nitrided - 10x universal stop 115 L, nitrided - 10x stop and clamping angle 90 X, nitrided - 10x stop and clamping angle 90 L, nitrided - 4x stop and clamping angle 300 G, nitrided - 1x set of stop and clamping angles 250 G with rotating angle, nitrided - 1x set of stop and clamping angles 500 GK, nitrided - 1x tool trolley, powder-coated - 1x accessory set The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

number: 124 bore: 28 mm weight: 326 kg 4-283500 consisting of: - 14x Professional screw clamp - nitrided - - 10x Professional screw clamp 45°/90° - nitrided - 8x Prism Ø 50 135° with screwed-in collar - nitrided - 36x Quick-clamping bolts without groove, double - burnished - 8x magnetic clamping bolts 68 - aluminum - 12x universal stop 150 L - nitrided - 12x universal stop 225 L - nitrided - 4x universal stop 500 S - nitrided - 12x stop and clamping bracket 175 L - nitrided - 2x stop and clamping bracket 300 G - nitrided - 2x stop and clamping bracket 500 G - nitrided - 1x stop and clamping bracket 500 G with rotation angle left - nitrided & stop and clamping bracket and clamping bracket 500 G with rotation angle right - nitrided - 1x stop and clamping bracket 750 G left - nitrided & stop and clamping bracket Clamping bracket 750 G right - nitrided - 1x stop and clamping bracket 800  ...

bore capacity in steel (diameter): 30 mm throat: 254 mm bore stroke: 120 mm : 4 Motor output: 9 speeds: 120 - 1810 U/min column diameter: 92 mm table surface area: 475 x 425 mm total power requirement: 1,1 kW dimensions: 915 x 450 x 1705 mm weight: ca. 135 kg Column drilling machine OPTIdrill DP 33V promotion set / 3020680SET With an electronically controllable drive in a modern design Industrial engine Quiet running spindle thanks to new spindle design Machine operation with safety electronics in 24 V direct current Guaranteed concentricity = 0.02 mm in the measured drilling spindle Clockwise/counterclockwise rotation Precision spindle bore Control panel with user-friendly, dirt and water resistant Membrane keyboard RPM display Separate emergency stop button Tapping function Precisely crafted, stable drill table with diagonal T-slots with all-round cooling water channel, can ...

bore capacity in steel (diameter): 30 mm throat: 270 mm bore stroke: 125 mm : 4 Motor output: 9 speeds: 70 - 2800 U/min Column drilling machine OPTIdrill DP 33V promotion set / 3020680SET With an electronically controllable drive in a modern design Industrial engine Quiet running spindle thanks to new spindle design Machine operation with safety electronics in 24 V direct current Guaranteed concentricity = 0.02 mm in the measured drilling spindle Clockwise/counterclockwise rotation Precision spindle bore Control panel with user-friendly, dirt and water resistant Membrane keyboard RPM display Separate emergency stop button Tapping function Precisely crafted, stable drill table with diagonal T-slots with all-round cooling water channel, can be tilted sideways by ±45° and rotated by 360° Drilling depth stop LED machine light integrated in the drill head V-belt cover with s ...

OCS alfa-set 23 ist ein Werkzeug-Vorreinstellgerät, ausgelegt für Präzision, hohe Genauigkeit und Zuverlässigkeit. Längsweg (X-Achse) 150 mm, Vertikalweg (Z-Achse) 380 mm; Werkzeugaufnahme SK40. Technische Daten: Druckluftanschluss 4–6 bar, Anschluss 50 Hz 3x 240 V; Maschinengewicht ca. 100 kg; Abmessungen L900 × B450 × H1600 mm. Diverses Zubehör nicht angegeben. Eignet sich zur Erzielung enger Toleranzen für Automobil-, Uhren-, Werkzeugmaschinen-, Luftfahrt- und Medizinbranchen Technische Daten ohne Gewähr

Key data: 100 t

Qty. 1 Second-hand dross press machine – already dismantled and in storage Mfc.: Altek Model 100 with 10 x 181S Pan Sets Built: 2021 Dismantled: 2024 Cycle time for pressing: 6 – 8 min./ pan Capacity: 95 metric tonnes of dross/month 21 days/month = 4.523 mt/day 32 skims/day = 141 kg/skim The pan set dimensions are as follows PANSET MODEL Width Depth Stack-up height Stack-up weight Pan Capacity [MM] [MM] [MM] (kgs) m^3) (kgs) 181S 1016 813 543 1032 0.12 181

GE LM 2500 gas turbines 2 pcs available Power:24.000 Hp each Average working hours 1700 hours

From operating resolution: Selco Genesis 352 GSM DC Device No.007410000118 with water cooling Welding range 6-350 amps 350Amps at 60%ED 270Amps at 100% ED 380 volts with 8meter burner AQ 18F with flexible head and ground cable Adjustable pulse function RF Ignition 2/4 stroke

Key data: 240 KW, 300 kVA, 400 V

MODEL: EQ-P300240 GENERATOR ENGINE: Perkins 1506A-E88TAG5 FREQUENCY (HZ): 50 VOLTAGE(V): 400V/230V GENERATOR POWER: 300(kVA) / 240(kW) ENGINE POWER: 240(kW) CYLINDERS: 6 CONTROL SYSTEM: SELF-CONTROL FUEL TYPE: DIESEL COOLING: WATER-COOLED WEIGHT: 2150kg DIMENSIONS L/W/HEIGHT (MM): 310010001700 The engines are new, complete including control, diesel tank, exhaust and batteries. Network monitoring, grid feed-in Soundproofed Immediately ready for use. Control: Deep Sea Electronics (DSE) Alternator: Leroy-Somer Additional: Automatic Transfer Switch (ATS) 63A/100A ABB & Schneider Disconnectors GenCloud Connect with a phone or computer Single-phase valve 50°C-55°C Radiator External Diesel Tank Lubricating Oil Heater Water Heating Dispatch: Worldwide transport including unloading is possible for an extra charge To be able to quote an exact freight price, please se ...

Key data: 200 KW, 250 kVA, 400 V

MODEL: EQ-D250200 ENGINE: Deutz BF6M1015C-LA G1A FREQUENCY (HZ): 50 VOLTAGE (V): 400 MAXIMUM POWER: 250(kVA) / 200(kW) STARTING: ELECTRIC CONTROL SYSTEM: SELF-CONTROL FUEL TYPE: DIESEL COOLING: WATER-COOLED WEIGHT: 3300kg DIMENSIONS L/W/HEIGHT (MM): 380012502000 The engines are new, complete including control, diesel tank, exhaust and batteries. Network monitoring, grid feed-in Soundproofed Immediately ready for use. Control: Deep Sea Electronics (DSE) / ComAp Alternator: Leroy-Somer / Stamford Additional: Automatic Transfer Switch (ATS) 63A/100A ABB & Schneider Disconnectors GenCloud Connect with a phone or computer Single-phase valve 50°C-55°C Radiator External Diesel Tank Lubricating Oil Heater Water Heating Dispatch: Worldwide transport including unloading is possible for an extra charge To be able to quote an exact freight price, please send us an inqui ...

Key data: 250 KW, 313 kVA, 400 V

MODEL: EQ-D313250 ENGINE: Deutz BF6M1015C-LA G3A FREQUENCY (HZ): 50 VOLTAGE (V): 400 MAXIMUM POWER: 313(kVA) / 250(kW) STARTING: ELECTRIC CONTROL SYSTEM: SELF-CONTROL FUEL TYPE: DIESEL COOLING: WATER-COOLED WEIGHT: 3500kg DIMENSIONS L/W/HEIGHT (MM): 380012502000 The engines are new, complete including control, diesel tank, exhaust and batteries. Network monitoring, grid feed-in Soundproofed Immediately ready for use. Control: Deep Sea Electronics (DSE) / ComAp Alternator: Leroy-Somer / Stamford Additional: Automatic Transfer Switch (ATS) 63A/100A ABB & Schneider Disconnectors GenCloud Connect with a phone or computer Single-phase valve 50°C-55°C Radiator External Diesel Tank Lubricating Oil Heater Water Heating Dispatch: Worldwide transport including unloading is possible for an extra charge To be able to quote an exact freight price, please send us an inqui ...

Key data: 400 KW, 500 kVA, 400 V

MODEL: EQ-D500400 ENGINE: Deutz BF8M1015CP-LA G2 FREQUENCY (HZ): 50 VOLTAGE (V): 400 MAXIMUM POWER: 500(kVA) / 400(kW) STARTING: ELECTRIC CONTROL SYSTEM: SELF-CONTROL FUEL TYPE: DIESEL COOLING: WATER-COOLED WEIGHT: 5000kg DIMENSIONS L/W/HEIGHT (MM): 460017002300 The engines are new, complete including control, diesel tank, exhaust and batteries. Network monitoring, grid feed-in Soundproofed Immediately ready for use. Control: Deep Sea Electronics (DSE) / ComAp Alternator: Leroy-Somer / Stamford Additional: Automatic Transfer Switch (ATS) 63A/100A ABB & Schneider Disconnectors GenCloud Connect with a phone or computer Single-phase valve 50°C-55°C Radiator External Diesel Tank Lubricating Oil Heater Water Heating Dispatch: Worldwide transport including unloading is possible for an extra charge To be able to quote an exact freight price, please send us an inqui ...

3516 Diesel Generator Set Just 1032 WORKING HOURS!

Type: Engine, Type number: 12V71 7123-7305 GENERATOR 438KVA

Type: Engine, Type number: QST30-G2 GENERATOR 937,5KVA

Engine Brand: OLYMPIAN, Conditie: USED, , https://www.hamofa.com/stock/generators/olympian-generac-156-kva-used/ 22387, , = More information =, , Type number: OLYMPIAN GENERAC 156 KVA

SUMAB is currently offering a horizontal steam generator. Technical details: Capacity 1500 kg/h, allows you to produce steam in a short period of time. Pre-installed accessories are ready to run. A two part platform for easy assembly on site. Includes: water softening device, condensate tank, cavitation preventing pump, by-pass group with float trap, all fittings and piping connections.

Brand: MARELLI GENERATORS, Condition: NEW, Generator KVA: 3550 , Generator Hz: 50 , Generator Volts: 400 , Generator Amps: 5124 , , https://www.hamofa.com/stock/generators/marelli-generators-mjb630-la4b 24-3550kva-new/151, , = More information =, , Type number: MJB630 LA4B24 LOSSE GEN 3550KVA

ID3347 MTU 660 KVA Electric generator year/Baujahr 2000 approx. 150 hours/Stunden (accord. Counter MTU generator with 660 kVA, complete, MTU diesel engine type 12V 2000 G22 (565 KW) MTU genset with 660 kVA, complete, MTU diesel engine type 12V 2000 G22 (565 KW)

Engine Brand: VOLVO, Condition: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Black , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: yes , Starter Voltage: 24 Volt , Rated Power: 400 Kw, Injection Type: ECU (Electronic Control Unit) , Generator KVA: 550 , Generator Volts: 230/400 , Generator Amps: 794 , Generator Fases: 3 Fases , , https://www.hamofa.com/stock/generators/volvo-v550k-generator-550kva-u sed/193, , = More information =, , Empty weight: 3.625 kg, Type number: V550K GENERATOR 550KVA

Engine Brand: VOLVO, Condition: USED, Nominal Power @ Nominal Rpm: 450 Kw, Bore: 144 mm, Stroke: 165 mm, Engine Capacity: 16200 cc, Qty Cylinders: 6 Qty, Nominal Rpm @ Nominal Power: 1800 Rpm, Engine Fuel Type: Diesel , Engine Cooling Type: Radiator Cooled (std) , Engine Color: Green , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: no , Rated Power: 320 Kw, Rated Speed: 1500 Rpm, Injection Type: Mechanical Fuelpump , Generator KVA: 400 , Generator Hz: 50 , Generator Volts: 400 , Generator Amps: 577 , Generator Fases: 3 Fases + Nul (4 totaal) , , https://www.hamofa.com/stock/generators/volvo-twd1630g-generator-400kv a-used/310, , = More information =, , Type number: TWD1630G GENERATOR 400KVA

Engine Brand: VOLVO, Condition: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Beige , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: no , Starter Voltage: 24 Volt , Rated Power: 128 Kw, Rated Speed: 1500 Rpm, Injection Type: Mechanical Fuelpump , Generator KVA: 160 , Generator Hz: 50 , Generator Volts: 400 , Generator Amps: 230.9 , Generator Fases: 3 Fases , , https://www.hamofa.com/stock/generators/volvo-td710g-generator-160kva- used/389, , = More information =, , Empty weight: 2.030 kg, Type number: TD710G GENERATOR 160KVA