gas gen set used for sale

Clamping devices, clamping claws, deep clamping jaws, clamping pads, clamping tools, step claws, low clamps, clamping irons, accessories -Tensioning tool: clamping bracket, various designs -Norm: according to TGL30- -Bores: Ø 14/20/22/24/26 mm -Thread sizes: M10 / M16 / M20 -Dimensions: Individual part pictures with dimensions can be sent -Price / fee: complete -Weight: 32 kg

Clamping devices, clamps, deep clamping jaws, clamping pads, clamping tools, step clamps, low clamps, clamping irons, accessories -Tensioning tool: clamping bracket, extensive range -Norm: according to TGL30- -Thread sizes: M16 / M20 / M24 -Dimensions: see photos -T-slot bolts: see photo parts list -Price / fee: complete -Total weight: 93.2 kg

Gauge block box, gauge blocks, parallel gauge blocks, test pin set, test pins, plug gauge -Manufacturer: Cary, plug gauge test pin set: 3.01 - 3.49 mm -Content / nominal dimensions: see photos -Dimension box: 135/85 / H60 mm -Weight: 0.3 kg

Side mill, granulator, shredder, plastic shredder, cutting mill, granulate mill, granulator, rotor mill, recycling technology, -Condition: Mill is equipped with a new set of knives -Manufacturer: Getecha, side mill cutting mill -Type: GRS 180-A 0000 -Drive motor: 2.2 kW -Number: 1x mills available -Dimensions: 840/700/H875 mm -Weight: 188kg/pcs

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws -Manufacturer: Schunk, soft top jaws for power chucks 15 sets -Type: SWB-FR 130/inclined toothing 8 set, 1 x 4-part -Type: SWB-FR 131/inclined toothing 7 set -Price/sale: only complete -Dimensions: 460/160/H80 mm -Total weight: 10.7 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Turning jaw set, 4 pieces, hard, 2 sets -Jaw width: 25 mm -Price/sale: only complete -Dimensions: 200/90/H55 mm -Total weight: 4.1 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, 4-jaw set -Manufacturer: Rohm, base jaws for four-jaw chuck 2 set -Type: ID.: 107546 jaw width 20 mm -1 set: with soft top jaws, width 30mm -Price/sale: only complete -Dimensions: 200/90/H70 mm -Weight: 4.7 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws -Top jaws: for power chucks, 15 sets: soft jaws -Hole spacing: 44 mm -Width: 28 mm -Various versions: see photos, more pictures can be sent -Price/sale: only complete -Dimensions: 470/180/H80 mm -Weight: 8.3 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws -Manufacturer: SMW Autoblok, top jaws for power chucks 2 sets -Type: 012494 WAK 400-10, see photos -Hole spacing: 54 mm -Width: 34 mm -Price/sale: only complete -Dimensions: 170/190/H80 mm -Weight: 7.9 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws -Manufacturer: Schunk, top jaws for power chucks 3 sets -Type: SFA-AL 315, see pictures -Hole spacing: 54 mm -Price/sale: only complete -Dimensions: 160/215/H90 mm -Weight: 6.8 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws -Top jaws: for power chucks -2 set: soft jaws, aluminum -Hole spacing: 54 mm -Price/sale: only complete -Dimensions: 135/170/H80 mm -Weight: 1.8 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws -Top jaws: for power chucks -4 set: soft jaws, aluminum -1 movement: hard jaws -Hole spacing: 54 mm -Price/sale: only complete -Dimensions: 310/390/H110 mm -Weight: 18.7 kg

Thread cutting head with chaser jaws, pipe thread cutter, Thread cutting stock, cutting stock set, ratchet thread cutting stock -Inch thread: 4 dies R1/2 , R3/4, R1 , R1 1/4, ratchet -Transport case -Dimensions: 435/205/H90 mm -Weight: 8.6 kg

for milling holders, spindle head, tool mounting holder, modular tool pocket, tool holder set -Manufacturer: Susta, tool holder -Set: 6x SK 40 holders with base frame -Dimensions: 590/115/H120 mm -Weight: 3.7 kg

Flame cutting system, torch, oxy-fuel cutting system, cutting torch, welding torch, hand cutting torch, welding set -Zinser: burner set set in sheet metal box -Accessories: see pictures -Dimensions case: 480/230/H90 mm -Weight: 6 kg

Setup station, pallet changing system, pallet changer, pallet storage, tool changer chain, chain magazine, tool changing system, tool magazine -Setup station with: Garant ZERO CLAMP G-11886 -Manufacturer no.: 101545300002672 - 21063 1721559 -Dimensions: 400/400/H810 mm -Weight: 232 kg

Worm wheel and gear set, edge grinder, edge grinder, grinder, drawer grinder -a set consisting of: 1 worm wheel and 1 gear wheel for the oscillation -is a: original husband spare part -for: husband edging machine -different form: single-thread or and two-thread available -Multiple sentences: available -Price: for 1 set -Weight per set: 1.4 kg

Thread cutting dies, replacement dies, thread cutting heads with chasers, thread cutting stock, thread cutting machine, pipe thread cutter -various: thread cutting sizes -Price: complete -Weight: 12 kg

Access ramp set -Driveway width: 170 mm -Height: 230 mm -Dimensions: 810/290/H270 mm -Weight: 10 kg

Access ramp set -Driveway width: 210 mm -Height: 230 mm -Dimensions: 930/305/H250 mm -Weight: 10 kg

Cutting Clamp Kit, Hand Pipe Tap, Tapping Machine, Pipe Thread Cutter, Pipe Thread Cutter, Cutting Head -for pipe size: max. 2 inches -5x cutting tips: 3/4 1 1 1/4 1 1/2 2 inches -2x thread ratchets: Type 111-R/12-R -Price: complete -Dimensions: -Weight: 12.8 kg

Cutting Clamp Kit, Hand Pipe Tap, Tapping Machine, Pipe Thread Cutter, Pipe Thread Cutter, Cutting Head -for pipe size: max. 1 1/4 in -4x cutting tips: 1/2 3/4 1 1 1/4 inch -Number: 1x sets available -Price: per set -Dimensions: -Weight: 6.6 kg

Universal clamping pad -Execution: Toothed like a staircase. For use in pairs. Individual pads can be used in conjunction with clamps. -Support height: 35 to 200 mm -Material: Heat-treated steel, painted -Scope of delivery: 9 sets of different sizes -Weight: 7 kg

Universal clamping pad -Execution: Toothed like a staircase. For use in pairs. Individual pads can be used in conjunction with clamps. -Support height: 72 to 240 mm. -Material: Heat-treated steel, painted. -Scope of delivery: 3 sets of different sizes -Weight: 6.2 kg

Clamping devices, clamping claws, deep clamping jaws, clamping pads, clamping tools, step claws, low clamps, clamping irons, accessories -Execution: -Step-like interlocking -for use in pairs -Individual pads can be used in conjunction with clamp no. 372000 - Support height: 30 to 200 mm -Tempered steel: painted -Weight:t 6 kg

Clamping devices, clamps, deep clamping jaws, clamping pads, clamping tools, step clamps, low clamps, clamping irons, accessories -Execution: -Toothed like stairs -for use in pairs -individual pads can be used in conjunction with clamping arm No. 372000 -Support height: 22 to 208 mm. -Material: -Tempered steel: painted. -Scope of delivery: -including 2x wooden boxes -Weight: 12 kg

Quick-change chuck, quick-change holder, quick-change head, quick-change drill holder, quick-change insert -Take shaft: SK60 -2x sleeve: MK1 -2x sleeve: MK2 -2x sleeve: MK3 -2x sleeve: MK4 -2x sleeve: MK5 -Weight: 48 kg

Cutting Clamp Kit, Hand Pipe Thread Cutter, Tapping Machine, Pipe Thread Cutter, Pipe Thread Cutter, Cutting Head -for pipe size: max. 1 1/4 inches -Cutting tips: 7 -Transport case -Weight: 9.8 kg

Brake shoe set, wheel brake, brake set, -Brakes: from working platforms from GSL (German Standard Lift) -universal: applicable -with: return spring and brake lever -Number: 114x brakes available -Price: per piece -Dimensions: 280/200/H110 mm -Weight: 2.2 kg/piece

max. film width: 355 mm max. speed: 0 /h serial no.: 8518 voltage: 100-240 V frequency: 50-60 Hz weight: 150 kg dimensions of press (L x W x H): Belichter 75 x 85 x 100 cm dimensions of press (L x W x H): RIP 70 x 50 x 70 cm repeating accuracy: +/- 25 µm RIP included up to 3000 dpi Red laser diode max. page width 355 mm max. 200 lpi screen ruling The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. film width: 356 mm max. speed: 338 qcm/min Dimensions (L/W/H): 85x75x100 cm repeating accuracy: 25 µm material: Materialvorrat 76 m weight: 162 kg max. exposure length 2000 mm Resolution max. 2400 dpi red laser diode 670-680 nm point sizes 20-35 µm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Roller circulation shoe INA 1 x RUS 38134 ( 2xRUS38134 ) GR3 126497-4/973 Dimensions(single shoe): 132 x 52 x 48 mm price for a roller circulation shoe ! New ! Dimensions (packaging): 166 x 125 x 75 mm

Gauge blocks, reference standard PAGUS 6.875 - 9.975 mm 101 parts 44 Additional parts: 1x 1.001 / 3x 1.005 / 1x 1.02 / 2x 1.05 / 2x 1.07 / 1x 1.1 mm 2x 1.15 / 4x 1.2 / 2x 1.25 / 5x 1.3 / 1x 3.0 / 1x 6.5 mm 11x 7.0 / 1x 7.5 / 2x 8.0 / 1x 9.0 / 2x 9.5 / 1x 13.0 / 1x 15.0 mm im Wooden box used, checked ! Dimensions: 360 x 195 x 45 mm

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws -Top jaws: for power chucks -2 set: hard jaws -7 set: soft jaws -Dimensions: see photos / technical. drawing -Price/sale: only complete -Transport dimensions: 700/450/H120 mm -Weight: 101.6 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws -Top jaws: for power chucks -4 set: hard jaws -2 set: soft jaws -Dimensions: see photos / technical. drawing -Price/sale: only complete -Transport dimensions: 480/320/H150 mm -Weight: 57.5 kg

Water break tank / pressure booster set Grunfos Well-functioning break tank pressure booster set Pressure adjustable, max 4 bar 1 liter per second Tank equipped with supply float. Stainless steel pump Price: €550 ex VAT Duijvelaar, Stabu, Wildkamp, ​​Suevia

chiller, chiller Emicon RAS 601 S KP, , 60 Kw cooling capacity , 17.7 Kw. Electrical Power, Amp 51 YOC 2018 Refrigerant R290 Weight 1.062 kg.

Flame cutting system, torch, oxyfuel cutting system, cutting torch, welding torch, hand cutting torch, welding set -Manufacturer: Dräger, burner set set in a metal box -Burner size: 0.2 to 30 mm -Accessories: see pictures / parts list -Dimensions of the case: 470/220/H95 mm -Weight: 9 kg

Flame cutting system, torch, oxyfuel cutting system, cutting torch, welding torch, hand cutting torch, welding set, hose set, twin hose, oxyfuel hose -Manufacturer: Semperit, twin hose set -Type: acetylene oxygen 4/4 outside Ø 11 mm -Item no.: 58487 -Length: 5m -Transport dimensions: Ø 300 x 50 mm -Weight: 1.0 kg

Mounting rails sliding set, pipe clamps, pipe fastening, pipe clamp holder -Manufacturer: Sikla, sliding set for Siconnect Pressix rail system -Type: GS -Quantity: 22x sliding kit available -Price per piece -Dimension: 275/190/H55 mm -Weight: 1.8 kg/pc.

Mounting rails sliding set, pipe clamps, pipe fastening, pipe clamp holder -Manufacturer: Sikla, sliding set for Siconnect Pressix rail system -Type: GS CC-2G-PL 191711 -Quantity: 20x sliding kit available -Price per piece -Dimension: 150/130/H50 mm -Weight: 0.7 kg/pc.

Flame cutting system, torch, oxyfuel cutting system, cutting torch, welding torch, hand cutting torch, welding set, hose set, twin hose, oxyfuel hose -Hose set: acetylene oxygen -Type: DIN 8541/3/92/RH -Length: 24 m -Transport dimensions: Ø 640 x 140 mm -Weight: 13 kg

Flame cutting system, torch, oxyfuel cutting system, cutting torch, welding torch, hand cutting torch, welding set, hose set, twin hose, oxyfuel hose -Manufacturer: Semperit, twin hose set -Type: Acetylene oxygen ISO 3821 PN2 DN9 -Length: 20 m, hose coupling only on one side -Transport dimensions: Ø 600 x 120 mm -Weight: 10 kg

Original Molds for SIDEL SBO 10 totally 12 sets, year 2017 JADE has 12 sets of 10+1 pc PET bottle blow molder aluminum molds for sale, all made by SIDEL France in year 2017. Molds were used in SIDEL SBO 10 blow molder with energy saving air recovery system type SIDEL AirEco. Molds are for PET bottles from 250 ml to 2.0 liters with neck standard PCO 1881 (short neck) product being still and sparkling water. This SBO 10 was operated only 16 months (with 12 sets of molds) and thus molds are in excellent condition. Delivery will include also standalone shelves for holding the moulds safely in production and two sets of stretch rods

Used water cooling machine for food by Waiz model WAIZ 01. New 2019. Electricity supply: - Mains voltage: V 400 - Mains frequency: Hz 50 - Consumed power: kW 2.2 - Product moving belt speed [m/min]: 4 - Cooling water consumption [m3/h]: not more than 0.6 - Specific water consumption per kg of product [l/kg]: 1,5 - Recommended cooling water temperature [oС]: 10-15 - Machine dimensions [mm, no more], DSW 210010501800 - Cooling method standard type (water circulation) - Weight: 750 kg - Surface area of the line in contact with the product: 1,6 m2

For Wood, Plastic, Kitchens, Windows, Doors, Loading Furniture, construction, etc VAT not deductible.

Tool trolley with drawers and tool set HBM MACHINES GREYLINE article number: 9404 width ( without handle ): 800 mm depth: 460 mm height: 820 mm ( without castors ) Material: sheet steel 6 drawers: width: 540 mm, depth: 400 mm, height: 70 mm drawers with 245-piece tool set 1 drawer: width: 540 mm, depth: 400 mm, height: 200 mm drawer is damaged ! left side with perforated wall, right side with storage compartment with door further damage to the handle and the upper shelf 2x swivel castors with parking brake, 2x fixed castors used, tested ! Tool set as good as new ! Dimensions: 880 x 500 x 970 mm

Switch Set, Contact Set, Replacement Contacts TELEMECANIQUE LA5FF431 012830 3389110128307 for contactor LC1F150, LCF115 set includes: 6x fixed contacts, 3x movable contacts, 3x retaining blade, screw and washers New ! Dimensions (packaging): 90 x 60 x 100 mm

Falzeinbrennmaschine - Joint-setting machine La Fornigrafica FEM Serial-No. 3 Working with 500 mm -Online-Video-Inspection by Skype-Video- -We would be very pleased with your visit - more machines on Stock- -Available Immediately - Can be inspect- -On Stock Emskirchen / Nuernberg - Can be test-

Joint-setting machine Joachim Brandenburger Type 740 Serial-No. 740 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nuernberg - Can be test