gas furnace used for sale

Laboratory Furnace for Bending Test 120 kW Kiln 900 °C Chamber Furnace 2 bending chambers Ceiling height adjustment Temperature range: max. approx. 900 C Additional heating Control cabinet PC, Fabr. HP, Intel Core 2 Duo Voltage: 400 volts Power: 120 kW Year of Make: 2015 Antechamber Width: 900 mm Height: 300 mm Depth: 580 mm Bending chamber Width: 520 mm Height: 115 mm Depth: 550 mm More items - new and used - can be found in our shop! International shipping costs on request!

Hardening furnace G+H

Extruder + electric cabinet output: 200 kg Heads not included Winder not included

Offer 25335 Specifications: - Nominal temperature / continuous temperature infinitely variable up to 1280 ° - Three-sided heating ( bottom + side ) - Temperature control via NABERTHERM Controller C 19 - Drive 400 V / 5.5 kW - Interior dimensions approx. W 250 x H 140 x D 350 mm - Usable volume 11 L - Base frame W 900 x H 900 x D 950 mm - Space requirement approx. W 800 x H 600 x D 750 mm - Weight approx. 80 kg

Specifications: - Nominal temperature / continuous temperature up to 1150 ° - Temperature infinitely variable - Temperature display - Drive 400 V / 5 kW - Interior dimensions approx. W 160 x H 160 x D 360 mm - Space requirement approx. W 850 x H 700 x D 600 mm - Weight approx. 140 kg

temperature max.: ° internal length of the oven: mm internal width of the oven: mm internal height of the oven: mm total power requirement: kW weight of the machine ca.: t required space: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CHARACTERISTICS HEAT TREATMENT EQUIPMENT   temperature max.: 950 °C Clear width 2,200 mm Usable width 2,070 mm Usable height 400 mm Working height 1,300 mm Inlet roller conveyor 14,700 mm Inlet box 2,500 mm Annealing furnace 29,169 mm (Annealing furnace clear length) approx. 26,769 mm Cooling section (HT and NT) 51,000 mm Outlet box 2,500 mm Outfeed roller conveyor 14,660 mm Total length 114,530 mm (annealing furnace and cooling section) N2 purge gas volume 420 m3 Furnace design: Roller hearth continuous furnace Material: Tubes Outer diameter: 14 - 180 mm Wall thickness: 0.8 – 8.0 mm Length: 4.0 – 13.0 m Surface before annealing: - - Throughput at 920 °C annealing material temperature Throughput at 700 °C annealing material temperature Reference pipes: 25 x 2.5 x 8000 mm 33 x 3.5 x 8000 mm 40 x 3.5 x 8000 mm 55 x 2.8 x 8000 mm 63 x 4 x 8000 mm 75 x 6 x 8000 mm 110 x 8 x 8000 mm ...

Gross combustion chamber: 800l, usable combustion chamber: 500l, combustion chamber dimensions X/Y/Z: 820mm/600mm/1015mm, connected load: 100kW, max. operating temperature: 1400°C, machine dimensions X/Y/Z: approx. 1450mm/1150mm/2100mm, weight: approx. 1500kg. Including fresh air blower and control cabinet with controller Jumo Imago 500. On site inspection is possible.

Usable space: approx. 4m³, max. temperature: 400°C. The furnace is located in the outdoor storage area. Documentation available. An on site inspection is possible.

Fully functional Eldec hardening plant Year of Make: 2014 Type: MIND 750 CNC Machine Number: KA20130186 Serial Number: SY14001 Operating hours: 32,767 h Accessories: KLH Tank Pumps Heat Exchanger Station TPW100 TPW100-00-ELD Year of construction 2013 Location of the machine: 73430 Aalen The machine can be viewed on site. It is still energized and works perfectly. You can make an appointment for a viewing at any time. We would love to hear from you. We will be happy to answer any questions you may have at any time. We are looking forward to a good cooperation and thank you for your interest in advance.

x-travel: 550 mm y-travel: 400 mm z-travel: 360 mm b-axis: +/- 110 ° c-axis: 360 ° 0 Control: HEIDENHAIN iTNC 530 spindle taper: HSK63 spindle turning speed - stepless: 20000 U/min tools in tool magazin: 48 weight of the machine ca.: 10 t dimensions of the machine ca.: 3 x 5 x 3 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Industrial drying oven / heating oven: Maximum operating temperature: 160°C, power: 20.6kW, double-door model, recirculating air / fresh air system, digital PID temperature controller, digital timer / process control, digital recording device / chart recorder (TE Direct), internal dimensions (W x H x D): approx. 1000mm x 1500mm x 800mm (approx. 1200l volume), external dimensions (W x H x D): approx. 1600mm x 2100mm x 1200mm, total weight: 580kg. Inspection possible by arrangement.

Key data: 300 °C

Technical data: Manufacturer: Vötsch Type: NTL 60/60 Year of Make: 1999 Usable space:0.2 m³ Nominal power: 7.2 kW Nominal temperature: 300 °C Steam room: 0.39 m³ Minimum exhaust air volume flow: 0.2 m³ Condition Condition: Used Functional: tested and fully functional

temperature max.: . ° internal length of the oven: . mm internal width of the oven: . mm internal height of the oven: . mm total power requirement: kW weight of the machine ca.: t Annealing furnace with extraction system Make: Helmut Peiler 2 pieces available The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

temperature max.: . ° internal length of the oven: . mm internal width of the oven: . mm internal height of the oven: . mm total power requirement: kW weight of the machine ca.: t Annealing furnace with extraction system Make: Helmut Peiler 2 pieces available The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

degree: 500 working heigth: - mm length: 600 mm width: 600 mm depth: 600 mm total power requirement: 21 A / 14,5 kW weight of the machine ca.: 0,5 t dimensions of the machine ca.: 1 x 1 x 2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A Rohde chamber kiln is available. Volume: 600l, max. temperature: 1000°C, internal dimensions X/Y/Z: 710mm/870mm/920mm, power: 40kW, insulation layers: 2, heating directions: 4, heating element: grooved refractory brick. Machine dimensions X/Y/Z: approx. 1100mm/1500mm/2300mm, weight: approx. 1000kg. Documentation available. An on-site inspection is possible.

Various spare parts for annealing furnaces

Manufacturer : Nabertherm Model: N 875/65HA Year of Manufacture: 2015 Maximum Temperature: 650 degrees C Power Supply: 400 V / 50 Hz Current: 39 / 39 / 39 A Power Rating: 27 kW - Condition: This furnace is in like-new condition. Since arriving at the current facility in 2020, it has never been observed in operation. Employees report that it was used only two or three times at the very beginning. Find more here - / Contact us at -

Description: Vacuum hardening furnace XRETORT 700/25 series Year of Make: 2000 Info: Vacuum furnace system with control unit with pumping station and inert gas system The system stood around for a long time and is not calibrated. Vacuum pump is not included.

Manufacturer: Nabertherm Model: RSRC 470/270/13S Year of Manufacture: 2019 Type of Machine : Large-diameter tube furnace Technical Specifications: - Maximum pipe diameter: 470 mm - Heated length: 2700 mm - Number of heating zones: 3 - Furnace chamber dimensions: 670 x 2700 x 670 mm - Maximum temperature: 1300 degrees C - Operating temperature: 1250 degrees C - Rotation control range: 1 to 5 rpm - Electrical power: approximately 120 kW - Nominal voltage: 400 VAC - Connection power: 120 kW/kVA - Outer dimensions (L x W x H): 3150 x 1560 x 1155 mm (without base frame) - Weight: under 3000 kg - Documentation: EC declaration of conformity and operating instructions included Find more here - / Contact us at -

A retort furnace PFS Anlagenbau UG for gas nitriding, nitrocarburizing, and tempering is available. Load weight range: 750kg-6000kg, max. operating temperature: 750°C, treatment chamber dimensions X/Y/Z: 1800mm/900mm/900mm, number of burners: 4, burner type: recuperative, burner output: 4×80kW, loading height: 1200mm, max. evacuation temperature: 350°C, retort material: 1.4841, circulator air volume flow: 10000m³/h, nitriding system manufacturer: Process-Electronic, vacuum pump capacity: 240m³/h, total pressure: below 0.7mbar, max. operating pressure: 1.45bar. Documentation available. An on-site inspection is possible.

max. temperature: 1280 Grad size of opening: 350 x 250 mm depth of chamber: 500 mm volume: 41 L voltage: 400 V total power requirement: 15,0 kW weight of the machine ca.: 265 kg dimensions of the machine ca.: m - Serial-No.: 305266 - control: NABERTHERM B150 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: ELIOG Type: KFG-5-1400 Year of Make: 1997 Electrical connected load: 32 kVA Connected load gas: 1450 kW Temperature max. 1400°C Condition of the facility: good, has been modernized in several steps We can offer the facility completely renovated.

Rated temperature: 1100°C Usable dimensions (WxDxH): 200 x 300 x 150 mm electr. Connection: 230 V, 1.4 kW Heating time: 100 min. Footprint: 752 x 576 x 700 mm Weight: 78 kg

Oven, heating oven, heating chamber, heating cabinet, hardening oven, annealing oven -Manufacturer:Artur Nolzen, Chamber dryer oven type KTS 53/30/70 -Temperature: max. 1100 °C -Chamber size: 710 x 535 x 300 mm -Heating output: 25 kW -Automatic temperature control -Individual components: see photos -Dimensions: 1630/1530/H1700 mm -Weight: 1698 kg

A Dentsply porcelain firing furnace for dental laboratories is available. Power: approx. 1.2kW, max. temperature: 1200°C, weight: approx. 30kg. An on-site inspection is possible.

max. temperature: 1280 Grad size of opening: ca. 350 x 350 mm depth of chamber: ca. 400 mm heating capacity: 3,3 kW Total Dimension: 830 x 700 x 600 mm weight of the machine ca.: 120 kg control Program Controller S8 Only ceramics were fired in this furnace. It has a very low power consumption Base frame not included in price. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Offer 26150 Technical data: - Nominal temperature / continuous temperature infinitely variable up to 1280 ° - Three-sided heating ( bottom + side ) - Temperature control via NABERTHERM Controller C 30 - Drive 400 V / 3.6 kW - Interior dimensions approx. W 250 x H 140 x D 350 mm - Usable volume 11 L - Space requirement approx. W 800 x H 600 x D 750 mm - Weight approx. 80 kg

A DeguDent high-temperature sintering furnace for dental zirconium oxide for sintering pre-sintered zirconium oxide crowns, bridges and frameworks is available. Temperature: 1350°C, machine dimensions X/Y/Z: approx. 500mm/650mm/550mm, weight: approx. 80kg. An on-site inspection is possible.

Electrically heated bogie hearth furnace for a maximum operating temperature of 1,300°C (brick lining designed for up to 1,400°C). Incl. 1 piece of hearth wagon (track-bound) and switchgear (built in 2004). Electrical power: Approx. 170 kW, dimensions usable space (WxDxH): 1,450 mm x 2,600 mm x 1,400 mm.

A horizontal glass tempering furnace is offered. Max. temperature: 750°C, heating zones: 10, control system: PLC. Equipped with roller conveyor infeed and outfeed with ceramic rollers, high-pressure cooling blower, control cabinets, hydraulic power unit. Inspection possible by appointment.

Hardening furnace Lg.Nr. 26164 Technical data: - Nominal temperature / continuous temperature infinitely variable up to 1200 ° - Three-sided heating ( bottom + side ) - Temperature control via NABERTHERM Controller C 30 - T. max. 120 min - Drive 400 V / 12 kW - Interior dimensions approx. W 350 x H 250 x D 770 mm - Usable volume 41 L - Space requirement approx. W 950 x H 1370 x D 1600 mm - Weight approx. 400 kg

The system consists of two bell furnaces, maximum temperature: 1100°C, annealing chamber: 2x 1000mm, electrical connection: delta, current rating: 433A, connected load: 300kW, equipment: power control, temperature control, process monitoring, safety controller, emergency stop system, motorized drive for bell movement, air conditioning unit, electrical control cabinet, and control system. Inspection on site is possible.

Serial Number: SN343064 , Max. temperature: 650° , Power: 9.8Kw , Furnace room capacity approx.:400x400 , Depth approx.: 600 mm , with digital control terminal, see photos for more details Auction-ID: A7-48332-803

Three-phase hopper oven for flow drying, 6600W power. Items sold in unverified status Items not subject to sales restrictions Auction-ID: A7-48361-8

BINDER FD-115 furnace / charging oven with forced convection 300°C Capacity: 115 liters (FD115) Temperature range: Room temperature plus 5°C to 300°C Built-in digital temperature display 2 shelves Cable routing: Ø 30 mm (on the right wall) Power supply: 230 V, Frequency: 50-60 Hz, Power: 1600 W, Internal dimensions: 60 x 40 x 48 cm Overall dimensions: 83.5 x 75 x 70.5 cm Weight: 85 kg Tested at 150°C

Technical details Type: Industrial tooling components (fixture blocks / die holders) Configuration: Cast metal blocks with flange geometry Quantity: 5 units Design: - Oval/rectangular flange shapes - Central bores (single and double configurations) - Multiple bolt holes for mounting Material: Cast iron or cast steel Construction: Thick-walled, designed for high mechanical and thermal loads Application: Fixture bases, die holders, mould supports, or furnace/press tooling Load capability: Suitable for high-temperature and high-stress environments Dimensions and weight (approx.) Length: 300 mm Width: 200 mm Height: 120 mm Weight: 120 kg (total) Auction-ID: A7-48441-129

HINDELAN KVO-800 – Tilting Crucible Furnace General data: Manufacturer: Hindenlang Model: KVO-800 Year of manufacture: 1990 Machine type: Tilting crucible furnace Installation: Pit-mounted system Technical details: Capacity: approx. 600 – 800 kg (aluminium) Tilting system: Mechanical / assisted (pivot arms) Description: Industrial tilting crucible furnace designed for melting and handling aluminium. The pit-mounted configuration ensures stability and efficient operation, while the mechanical tilting system allows safe and controlled pouring of molten metal. Suitable for foundry and die-casting applications. Auction-ID: A7-48441-18

General description Industrial electric crucible melting furnace, designed for melting non-ferrous metals such as aluminum, brass, or bronze. Suitable for small batch foundry and workshop applications. Technical details Type: Electric crucible melting furnace Configuration: Vertical cylindrical design Operation: Electric resistance heating Power: Approx. 28 kW (from nameplate) Voltage: Approx. 380 V Frequency: 50 Hz Year: Approx. 1980 Construction: Steel housing with refractory-lined chamber Loading: Manual top-opening lid with central charging access Access: Side tapping / access port and lower service hatch Application: Batch melting of non-ferrous metals Equipment - Refractory-lined melting chamber - Manual lid system - Side tapping port - Industrial steel structure Condition and remarks Used industrial furnace. External wear and oxidation visible. Internal  ...

General description Industrial gas-fired furnace with refractory-lined chamber, designed for heating, preheating, or thermal processing operations in workshop or foundry environments. Technical details Type: Industrial combustion furnace Configuration: Vertical furnace body with insulated housing Heating system: Gas burner system (MAGRA) Fuel: Likely natural gas or propane Chamber: Refractory-lined (firebrick interior) Exhaust: Chimney / flue connection Burner: MAGRA gas/air control unit (Gas/Luftabschneider) Application: Heat treatment, preheating, burn-off processes, or auxiliary foundry use Build period: Approx. 1980–2000 (estimated) Equipment - Furnace body with refractory lining - Gas burner system (MAGRA) - Exhaust stack connection - Insulated steel housing Condition and remarks Used industrial unit. Shows heavy wear including soot deposits, oxidation, an ...

RAUCH ZSO450E – Zinc Melting Furnace General data: Manufacturer: Rauch Model: ZSO450E Serial number: 7069 Year of manufacture: 1993 Machine type: Zinc melting furnace Condition: Defective – requires new crucible and maintenance Technical details: Heating output: 57.6 kW Voltage: 380 V Nominal temperature: 450 °C Additional equipment: Tilting device (Rauch) Serial number: 7167 Year of manufacture: 1993 Control system: defective Description: Industrial zinc melting furnace designed for foundry applications. The unit includes a tilting mechanism for material handling. Currently not operational and requires refurbishment, including replacement of the crucible and maintenance work. Auction-ID: A7-48441-4

Melting and holding furnace StrikoWestofen MH II-T 6000/3500 G-eg, built in 2021, heating capacity 2,600 kW, capacity 6,000 kg, melting capacity 3,500 kg/h, max. melting pool temperature 760°C, max. furnace room temperature 1,050°C, height approx. 8,043 mm, with Striko K2000E feeder, built in 2021, with elevator for transport boxes

Heating capacity 2 x 35 kW, circulating air volume 2 x 12,000 sqm/h,The dismantling must be carried out by one of the partner companies mentioned. The costs for this are to be inquired by the buyer himself Auction-ID: A1-48512-16

Melting furnace ZPF Therm ST-G3 T 10 CHHTETWWK, built in 2012, loading weight 9,000 kg, with loading lift (No. ZPF Therm 2), plus processing platform, 2 slag storage tanks, preheating chamber for aluminium ZPF VWK5.2, built in 2012, heated by waste heat, with chimney

Electrode furnace: Capacity 5 Kg Inner dimensions (LxWxD) 100 x 75 x 450 mm Power 0.4 kw Connection voltage 220 - 240 V Adjustment device 30 - 180 degrees Weight 10 kg Dimensions L x W x H 570 x 200 x 150 mm Condition: never used / new (5) Auction-ID: A7-48486-158

Electrode furnace: Capacity 10 Kg Inner dimensions (LxWxH) 135 x 80 x 480 mm Power 0.5 kw Connection voltage 220 - 240 V Adjustment device 30 - 180 degrees Weight 15 kg Dimensions L x W x H 600 x 250 x 200 mm Condition: never used / new (5) Auction-ID: A7-48486-176

- 2 electric induction melting furnaces, with cylindrical steel body, tilting, capacity 12000 kg each, are included. - Approximate joint production capacity: 70,000 kg per 8-hour work shift. - For smelting iron at a maximum temperature of 1480 °C. - 2 URBAR RBA 90-100/560 feeder trolleys. - 2 PAWELS TS transformers: year of manufacture 2007, power 4850 kVA each. - Cooling installation with pumps and plate heat exchanger. - Operating conditions of this machine: unchecked. - EX WORKS Sale. Dismantling, disconnection, loading and removal at the expense of the buyer, who must comply with current regulations on occupational risk prevention, health and safety in industrial work, providing the necessary documentation, insurance and accreditations. Auction-ID: A7-48166-6

We offer two Ford gas cogeneration plants for sale. Synchronous generator: Emod 19 KVA Engine: Ford Voltage: 230 / 400 3 phases Frequency: 50 Hz Speed: 1500 rpm COS phi: 0.8 Starter: 24 V Weight: 900 kg Year of construction: 1996 Hours of operation: 24,000

Agilent Gaschromatograph model 6890/G 1530A Detector FID/EPC, Injector S/SL /EPC HP-IB and Jetdirect card upon request with Autosampler and Agilent Chemstation