gas furnace used for sale

Hitachi LaChrom L 7485 Fluorescence Detector Excitation 200-850 nm Emission 250-900 nm Autozero analytical flow cell

Offer 23108 Specifications: - Welding current max. 550 A 60% ED - 420 A 100% ED - Welding current adjustable 50 A - 550 A - 3 coarse steps + 12 fine steps - Separate wire feeder case with between package 4 m - 4 roller wire feeders infinitely adjustable 0.5 - 24 m/min - 2 stroke + 4 stroke - regulation - water-cooled hose package approx. 4 rm - Ground cable -Reducer - Connection 400 V / 64 A - Space requirement approx. W 550 x H 1310 x D 1050 mm - Weight approx. 150 kg

Shock absorbers, gas pressure springs, shock absorbers, start-up dampers, impact absorbers -Piston: Ø 40 mm -Piston housing length: 377 mm -Piston rod: Ø 20 mm -Recording hole: Ø 14 mm -Dimensions: Ø 40 x 530 mm -Weight: 1.5 kg/piece

Emergency power gas turbine from 1977 with few running hours, without generator and controller. 1 available 456 KW x 1,500 1/min Manafacture: Garrett Model No.: ME831-800A Type: Gas turbine Serial Number: P-830005 Power [KW]: 456 Year of construction: 1977 Weight [kg]: 915 Dimensions LxWxH [cm]: 270x120x120

Shock absorbers, gas pressure springs, shock absorbers, start-up dampers, impact absorbers -Piston: Ø 40 mm -Piston housing length: 377 mm -Piston rod: Ø 20 mm -Recording hole: Ø 14 mm -Price: per piece -Number: 3 pieces -Dimensions: Ø 40 x 530 mm -Weight: 1.5 kg/piece

Air bellows, roller bellows, air cushions, spring-loaded brake -Gas bottle holder -for: 33.5/43.5 Lbs -Hole spacing: 115/75 mm -Weight: 3.2 kg

Shock absorber, gas spring, shock absorber -Shaft: Ø 35 mm -Shaft length: 28 mm -Bore: M8 -Quantity: 8 pieces available Price: per piece -Dimensions: 75/160 mm -Weight: 3.8 kg/piece

Complete Waukesha CHP power plant Including: Generator set Heat recovery Silincer Exhaust pipe Pumps Pipes Oil system Gas line Sound proof housing Air in and outlet The complete installation is in good condition and directly available. GAS POWER HOLLAND 00316 38 63 90 71

Shock absorber, gas spring, shock absorber -Shaft: Ø 50 mm -Shaft length: 28 mm -Bore: M8 -Quantity: 5 pieces available Price: per piece -Dimensions: 95/170 mm -Weight: 6.6 kg/piece

Gas and air filters, air filters -Manufacturer: Maxitrol -Type: GF65 MF-DN65 -Dimensions: 245/199/H190 mm -Weight: 4.5 kg

Sample gas cooler -Measuring gas cooler with: protective lining -Connection: 240 volts -Dimensions: 335/560/H390 mm -Weight: 32 kg

Agilent 1200 HPLC system consisting of: Agilent 1200 G 1312B SL binary HPLC pump (up to 600 bar) Agilent 1200 G 1315B Diode Array Detector Agilent 1200 G 1316 B TLC SL Colcom/column thermostat Agilent 1200 G 1379 Degasser Agilent 1200 G 1330 Thermostat for Autosampler Agilent 1200 G 1367D Autosampler Hip ALS SL + on request with Agilent Chemstation/Warranty

Shock absorber, gas spring, shock absorber, start-up damper -Pipe: Ø 82 mm -Total length: 510 mm -Hole diameter: Ø 24 mm -Number: 2 shock absorbers available Price: per piece -Dimensions: 82/82/H510 mm -Weight: 11.5 kg/piece

Shock absorbers, gas pressure springs, shock absorbers, start-up dampers, impact absorbers -Shaft: Ø 39 mm -Shaft length: 470 mm -Recording hole: Ø 17 mm -Number: 4 pieces of shock absorbers available -Price: per piece -Dimensions: 1755/140/H100 mm -Weight: 24 kg/piece

Agilent 5973N inert MSD with GC Agilent 6890 N Agilent 5973 N inert MSD with GC Agilent 6890 N Network Agilent 5973 inert MSD with EI and turbomolecular pump enhanced BOC Edwards Turbopump Agilent GC 6890 Network with Split/Splitless Injector/EPC Edwards Vacuum Pump 1.5 MSD Productivity Chemstation E02.02 on PC/Win 10 NIST on request Option: Agilent Liquid Sampler, CTC or Gerstel MPS2 Sampler currently serviced/with warranty Installation on request

Remote control for inert gas welding device, inert gas device, welding rectifier, hand controller -Remote control -Manufacturer: unknown -Type: Poti -Number: 1x controls available -Price: per piece -Dimensions: 155/105/H130 mm -Weight: 2.7 kg

Solenoid valve, butterfly valve, flap valve, solenoid valve, solenoid valve, solenoid gas valve, gas solenoid valve, double gas valve, gas valve -Manufacturer: Siemens, double gas valve -Type: VGD40.065 -Connection: DN65 -Pmax .: 700 mbar -Dimensions: 285/190 / H210 mm -Weight: 8.3 kg

Solenoid valve, butterfly valve, flap valve, solenoid valve, solenoid valve, solenoid gas valve, gas solenoid valve, double gas valve, gas valve -Manufacturer: Siemens, double gas valve -Type: VGD40.040 -Connection: DN40 -Pmax .: 1000 mbar -Dimension: 235/170 / H195 mm -Weight: 6.9 kg

Key data: 1400 KW, 1800 kVA, 400 V

Gas generator set from 2005, Scope of delivery: Base frame and generator, as shown with missing parts. 1 available 1,800 KWel x 1,500 rpm, 400 V/50 Hz. AC generator: Stamford HC I734G2 CG, 1,800 KVA Gas engine MWM TBG620-V16K Manufacturer: MWM Model No.: TBG620-V16K Type: Gas generator set Serial Number: 2205551 Power [KW]: 1.400 Year of construction: 2005 Hours:– Weight [kg]: 8.588 Dimensions LxWxH [cm]: 470×145 AC generator Stamford HC I734G2 CG Manafacture: Stamford Model: HC I734G2 CG Type: AC Synchronous Generator Serial Number: 00145797 Power [KVA]: 1,800 Voltage [V]: 400 Frequency [Hz]: 50 Current [A]: 2.598 Speed [1/min]: 1,500 Year of construction: 2005 Weight [kg]: 3.700

Machine type: MIG/MAG welding system Make Oerlikon Type Minicito 304 Connection voltage 3 x 400 Volt Adjustment range 35 – 300 amps Duty cycle 35% ED at 300 amps 60% ED at 230 amps 100% ED at 180 amps Current setting: 14 switching levels Cooling transformer by built-in fan Cooling burner gas-cooled Design of mobile compact system Wire feeder toothed 4-roller gearbox Fuse protection 16 amps Dimensions L x W x H 950 x 400 x 820 mm Weight 80 kg Age approx. 15 years Condition workshop-tested, good, incl. UVV test report Scope of delivery welding system with the following accessories: 1 piece welding torch 3 mtr. long 1 piece of ground cable 1 piece pressure reducer 1 roll of welding wire D-300 coil, 5 kg 1 can of non-stick spray 1 piece of hand shield 1 piece of protective glass 10 DIN 1 piece of glass attachment white 1 spare  ...

Recon Part Number: RMG 985B-200/100 Attention: We also have various other RECON parts from different manufacturers / types available. We will be happy to send you our current stock list. ---------------------------------------------------------------------- ----------- Sold only to commercial customers! ---------------------------------------------------------------------- ------------ If you have any further questions, please do not hesitate to contact us!

Spiral wound gasket, labyrinth body gasket, flange gasket, high pressure gasket -Manufacturer: Frenzelit, flat gasket Novatec Premium -External: O 162 mm -Inside: O 116 mm -Thickness: 2mm -Number: 107x seal available -Price per piece -Minimum purchase: 10 pieces -Weight: 0.05 kg/pc.

Spiral wound gasket, labyrinth body gasket, flange gasket -Spiral seal: Flange seal according to DIN EN 12560-2 5 pieces/package -Type: 2 1/2 150lbs 1.4404/PTFE -Dimension: Ø124 x 2mm -Price: complete -Total weight: 0.7 kg

Recon Part Number: 1227 8128 Attention: We also have various other RECON parts from different manufacturers / types available. We will be happy to send you our current stock list. ---------------------------------------------------------------------- ----------- Sold only to commercial customers! ---------------------------------------------------------------------- ------------ If you have any further questions, please do not hesitate to contact us!

Inert gas welding machine, arc welding system, MIG/MAG welding system -Manufacturer: Ess, inert gas welding machine MIG-MAG 520-2 MW -Type: 520-2MW -Max. Welding power: 500 A -Water cooled -Wire feed case: ESS DVK 17 -Dimensions: 1160/500/H1220 mm -Weight: 379 kg

Heating, burner, gas burner, fan burner, gas fan burner -Manufacturer: Dreizler, fan burner type GE 200/300 AR 2 -Nominal heat output: 355 kW -Gas type: natural gas -Gas connection: 20 mbar -Blower motor: 0.37 kW -Dimension: 760/510/H535 mm -Weight: 33 kg

Key data: 588 V

2 x Jenbacher 320 Wood gas / Syngas. We have for sale a complete generating station for syngas, including gas line, circuit breaker, control panel and radiator. Two low-hour wood gas / syngas generators in great condition. They are currently set for wood gas / syngas. All wiring between control panel and alternator has been marked up. Available for immediate delivery. For use on gas from pyrolysis plants, gasification plants, woodgas and synthesis gas. Capacity: these generator sets are rated at 588kW for syngas. If they are run on other gases they could produce 720kW. Make and Model: Jenbacher 320 Fuel: Wood gas / Syngas Year: 2008 Hours: 5,000 Capacity: 588 / 720 kW V: 400 HZ: 50 Scope of supply: Engine,Alternator, Frame, Control panel, Switch panels, Dual gas lines, Radiators and other accessories. Price: Please Apply Various Original Jenbacher con ...

GE LM 2500 gas turbines 2 pcs available Power:24.000 Hp each Average working hours 1700 hours

AVAILABLE COMPLETE CHP JANBACHER 616 - Yeard 2010 With 2500kva transformer Exchanger - CHP - PANEL - complete .

Used packaging machine by Multivac type R 245. New 2010. Packaging machine: - produces vacuum and aerated packaging from deep-drawn and sealable bottom soft or thick film, combined with sealable top film. - has two packaging formats : 250g cube with pack size 145x92.25x approx. 40 mm 500÷600g cube with pack size 188.5x145x approx. 40 mm Power supply 400 V / 50 HZ 3/PE AC phases Rated power 15 kW Nominal current 39 A Max. precharge 50 A

2 x MTU 20V4000L63 complete power plant for sale 2 x 20V4000L63 generating sets total Each genset is 220 Kw at 1500 RPM total about 4.4 Mw with Stamford alternators system is 50 Hz and 2800 Kva Running hours are 20.000 and 30.000. respectively Gen sets year of manufacture is 2010

Perkin Elmer HS 40, Headspace sampler for 40 vials, max. temperature + 210 Celsius, min. +35 Celsius, fits all gas chromator graphs,

Key data: 3155 , 10500

Make and Model: Rolls Royce KVSG 18 G4 The engine is from 1994. It had a full rebuild in 2004. Fuel: Natural Gas Capacity: 3155kW Hours: 63,000 HZ: 50 V: 10500 Scope of Supply: Engine, Alternator, Base frame, Acoustic Container, Exhaust Gas Heat Exchanger, Control panel and synchronisation panels. Please note: circuit breaker and transformers are not included. Price: €200,000 Available for sale from Gas Engine Exchange . Please check our complete range of equipment at gasengineexchange.com.

TAURUS 70 Gas Turbine Year Of Make: 2004 Total running hours: 58.000h Total hours since last overhaul 28.600h Turbine 15158 RPM 60 HZ / 15143 RPM 50 HZ Alternator 1500 RPM 50 HZ 7200 Kw at 9000 KVa 11000 Volts

Key data: 1067 KW

we are looking for a Jenbacher 3 1067 kw we have a biogas plant

Key data: 1950 , 2437 , 11000

Cat 3520C Gas gensets Power 1950 Kw / 2437 kVA Frequency: 50 Hz Year: 2007 20 pcs available 55.000 Working hours average

Agilent 5975C inert MSD with GC 6890N Agilent 5975 C inert MSD, Agilent GC 6890 N Pfeiffer Turbomolecular Pump, Electronic Ionization/EI ; GC Injector Split/splitless, EPC, LAN Agilent Backing Pump, Software Agilent MSD Chemstation for Win10

GE Model : LM6000PA Power Output : 42 MWe ISO condition Voltage : 11KV Frequency : 50Hz Total 2 nos.

Plasma cutting machine, plasma cutter for plasma cutting system -Manufacturer: Hypertherm, gas console for plasma cutting machine -Type: 073239 from plasma cutting machine HT2000LHF -Dimensions: 295/175/H370 mm -Weight: 9.9 kg

Heat exchanger for inert gas welding machine, inert gas device, cooler -Manufacturer: CLOOS, heat exchanger from inert gas welding machine GLC 353 MC3 -Blower: ebm papst type M4Q0465-DA01-S8 -Dimensions: 330/160/H330 mm -Weight: 4.2 kg

Key data: 9700 , 11000

Wartsila 20V34SG complete Gas Power plant 9.7 MW 50 Hz 11K Volts Year of make 2011 45.000 Working Hours Maintanence done regularly by wartsila 20V34SG engine with all auxilaries: ABB AMG 1120LT08 Alternator, compressors, Lt Ht water tanks, LV MV HV step up Transformers, control panels, Unic control system, radiators, maintanence tanks, 2 x Napier 357 turbochargers, safety spares, Caterpillar emergency generator,Natural Gas Regulator Unit, engine tools, instruction manual and more... Please contact for more info and complete scope / offer

Key data: 70

MAN E0836 E302 CHP Unit in Acoustic Canopy for Sale. Capacity: 70kW Hours: 4,500 Year: 2011 Fuel: Natural gas Voltage: 400 Hz: 50 Scope of supply: Engine, Alternator, Control Panel, Acoustic canopy, Canopy fan, Engine water pump. Footprint of the combined heat and power unit is 3.4 meters x 1.14 meters including the control panel. It has been serviced every 1000 hours. The unit is not due an overhaul until 24,000 hours. Engine has been barred over, and the canopy fan and engine water pump have been powered up. The unit is in a warm boiler room so is in good condition. Available for sale from Gas Engine Exchange . Please check our complete range of equipment at gasengineexchange.com.

For sale is a LEROY-SOMER LSA L95/4P generator with the serial number 607788/1. This generator was coupled with a Jenbacher 620 engine with the design number U320. The generator delivers an output of 2530 kVA at an output voltage of 400 V. It was manufactured in 2016 and has only 500 hours of operation since then. The price of this powerful and hardly used generator is 30,000 euros. Please do not hesitate to contact us for more information or to arrange a viewing.

gasoline engine, gas engine, drive engine -Manufacturer: Perkins, gas engine -Type: unfortunately without type designation -Engine power: -Dimensions: see photos -Transport dimensions: 800/670/H980 mm -Weight: 426 kg

For sale is a Stamford HCI 734 F2 generator with serial number 96404594. This generator was coupled to a Jenbacher 320 engine with the design number 5727. The generator delivers an output of 1460 kVA at an output voltage of 400/231 V. It was manufactured in 1996. An important aspect to keep in mind is that a Megger test has been done on this generator. Please do not hesitate to contact us for more information or to arrange a viewing.

For sale is a Stamford HCI 734 FCG generator with the serial number A03C027807. This generator was coupled to a Jenbacher 320 engine with the design number B212. The generator delivers an output of 1460 kVA at an output voltage of 400/231 V. It was manufactured in 2003. An important aspect to keep in mind is that a Megger test has been done on this generator. Please do not hesitate to contact us for more information or to arrange a viewing.

Key data: 3431 , 4767 , 10500

Jenbacher gas generator ( UNUSED ) , Model : J620GS-F75 Power Output : 3431 KWm / 4767 KVA Voltage : 10500V Frequency : 50 Hz Qty : 8 sets Used gas generator, about 4000 hrs

Resato HBU-B160 Gas High Pressure Workshop Testing System The oil and gas industry is all about the extraction of crude oil and natural gas. One of the challenges is to make the best use of the assets to produce more from the available resources. Various high-pressure applications can contribute to this. Pressure tests guarantee the quality and safety of components for oil and gas production. By injecting a chemical liquid, the well is stimulated. With the controller, high-pressure systems control and regulate back pressure and liquids. In this way, oil and gas can be extracted more safely. Manufacturer: Resato HBU Test System  Type: HBU-B160 Max. pressure: 200bar Max. Capacity: 1570cc/ Max. pressure: 7 bar 2 x Gas Bottle Cage 3 x gas cylinder trolley Digital control panel is missing More items - new and used - can be found in our shop! International shipping costs on  ...

This industrial plant was built in 2007 as a pilot project and is only used temporarily. The complete package includes numerous pumps, pneumatic and manual gate valves of various sizes, as well as ball check valves, flow meters as well as the entire pipeline construction and a control cabinet. Preferably, this system is sold as a package including self-dismantling. Details on request.

Heating, burner, gas burner -Gas type: Natural gas (Liquefied petroleum) -Gas connection: 20 mbar to 1000 mbar -Nominal heat output: 3590 kW -Blower motor: 5.5 kW -Weight: 160 kg