gas engine spare used for sale

Leit & Pull Spindle Lathe "DREHMA - D410x1500mm -Demonstration machine - year 2025 -CE - Identifier -Digital display -Turning diameter over bed 410mm -Turning length 1500mm -Turning diameter over support 255mm -Turning diameter in the offset 580mm -Spindle Passage 52mm -Speed range 45-1800 rpm -Automatic longitudinal/plane feeds -Thread/Inch/Metric etc. -Tailstock Mk4 -Central lubrication -Drive power 3.5 KW -Fixed / Rotating bezel -Multifix holder with 4x inserts -Three-jaw chuck 200mm Hsbknowatv Ss Au S Tel -Four-jaw chuck 250mm -Face Plate -Lining protection -Front safety device -Coolant device -Work light -Running tip -Machine feet Dimensions: LxWxH 2.5x1x1.6 meters / Weight 1800Kg

Lead & Pull Spindle Lathe EXCELLO - DLZ 500 SL -Tip height 250mm -Turning diameter over bed 500mm -Turning diameter over support 310mm -Center width 3000mm -Rod passage 65mm -Speeds: 28-1400 rpm -Automatic longitudinal/plane feeds -Three-jaw chuck 250mm -Four-jaw chuck 250mm -Multifix base holder with inserts -Bezel -Tool cabinet -Documentation Dimensions: LxWxH 5.5x1.4x1.6 meters / Weight 3500Kg

L & Z lathe / WEILER DA 210x1000 / With new 3-axis digital display -Year of construction 2005 -CE - Identifier -Guided tours good -COMPLETE TECHNICAL DATA SEE PHOTOS - Three axis digital display "NEW" -Quick-release collet device incl. 79 x collets (173E) -Multifix base holder with inserts -Three-jaw chuck -Electric lining protection -Slide protection additionally -Coolant device -Drill chuck / rotating tip -Swarf back wall -Work light -Complete documentation Dimensions: LxWxH 2.8x1.2 x1.8 meters / Weight 1600 Kg

Weiler Primus Type-MD-G -Tip height 125mm -Tip width 400mm -Speed range 80-4000 rpm -Spindle passage 24mm -Electric lining protection -Tailstock with drill quill -Work light -Four-jaw chuck -Multifix with inserts -Bed stop Dimensions: LxWxH 1.3x0.8x1.5 meters / Weight 400Kg

WEILER CONDOR VS 2 from university (test laboratory) -Guided tours "as good as new" -Three-axis digital display "NEW" -Tip height 165mm -Circumferential diameter over bed 330mm -Tip width 800mm -Speed range 28-2800 rpm -Automatic longitudinal/plane feeds -Spindle passage 40mm -Thread/Metric/Inch etc. -Collets - quick clamping device incl. collets -Vierbackenfutter-Röhm -Face Plate -Four-jaw chuck faceplate -Lining protection -Multifix with inserts -Emergency stop -Documentation -Unless otherwise stated, the price is /net/ plus VAT -Invoice will be issued Dimensions: LxWxH 2x0.8x1.6 meters / Weight 900Kg

Guide & Tension Spindle Lathe GEMA LZ 200 -Three - Axis Digital Display "NEW" -Guided tours " VERY GOOD" -Tip height 200 mm -Center width 1000 mm -Turning diameter over bed 400mm -Turning diameter over support 200mm -Spindle passage 54 mm -Automatic longitudinal/plane feeds -Speed range 36-2200 rpm -Tailstock MK 4- Adjustment 200mm -Three-jaw chuck 250mm -Electric lining protection -Multifix with inserts -Coolant device -Work light -Machine feet -Chip tray Dimensions: LxWxH 2x1.2x1.6 meters / Weight 1800Kg

WEILER Intern 800R Ladder & Pull Spindle Lathe -Turning diameter over bed 300mm -Turning diameter over support 150mm -Turning length 800mm -Spindle bore 42mm -Speed range 40 - 2000 rpm -Automatic longitudinal/plane feeds -Thread/Metric/Inch -Tailstock MK 3 -Drive power 3KW -Multifix with inserts -Three-jaw chuck 160mm -Lining protection -Swarf back wall with work light -Interchangeable wheels -Drill chuck -Rod passage 42mm -Tool cabinet -Documentation Dimensions: LxWxH 1.8x0.8x1.6 meters / Weight 750Kg

WEILER LZ330 / From educational institution incl. new 3-axis digital display -Turning diameter over bed 330mm -Turning diameter over support 165mm -Turning length 800mm -Speed range 25 - 2800 rpm -Automatic / longitudinal plan feeds -Multifix with 3x inserts -Drive power 3KW -Three-jaw chuck -Collet device with 20x collets -Copying device -Miscellaneous Accessories -Documentation Dimensions: LxWxH 1.8x0.7x1.6 meters / Weight 750Kg

L & Z lathe / WEILER CONDOR VS 2 with new 3-axis digital display from training company -3-axis digital display "NEW" -Tip height 165mm -Circumferential diameter over bed 330mm -Tip width 800mm -Speed range 28 - 2800 rpm -Automatic longitudinal/plane feeds -Spindle passage -Tailstock with tip -Collets / quick-release device incl. 25 x collets -Three-jaw chuck - Röhm 200mm with reverse jaws -Multifix /New with insert -Work light -Emergency / Off -Bed stop -Machine feet -Documentation Dimensions: LxWxH 2x0.8x1.6 meters / Weight 900Kg

VOEST DA 360 - Lead & Pull Spindle Lathe -Heidenhain digital display -Peak height above bed 400mm -Turning diameter over bed 800mm -Turning diameter over support 500mm -Turning length 1000mm -Rod passage approx. 87mm -Speed range 14 - 1000 rpm / 18x speeds -Automatic length / face feeds -Automatic input Z-axis -Tailstock MK 5 -Wedge bar chuck 250mm -Multifix base holder with insert -Work light -Machine feet -Documentation Dimensions: LxWxH 3x1.5x1.7 meters / Weight 3500 KG

GALLIC 16 N lead and pull spindle lathe with ACU-Rite digital display - Turning diameter over support 200mm - Turning diameter over bed 320mm - Tip height 160mm - Center width 1000mm - Speed range 45-2500 rpm - Spindle bore 40mm - Automatic feeds X/Z axis -Spindle bore approx. 42mm -Quick-change holder -Thread/Metric/Inch etc. -Tailstock MK 4 -Electric lining protection -Three-jaw chuck -Swarf back wall LxWxH 2.4x1x1.7 meters / Weight 1600Kg

Lead and tension spindle lathe Weiler Matador -Center width: 500 mm -Tip height: 140 mm -Feed range longitudinally over belt: 0.05–0.40 mm/rev -Feed range longitudinally via interchangeable gears: 0.018–0.800 mm/rev - Spindle head: size 5 -Drive: three-phase motor -Speed range: 15–3,550 rpm -Coolant pump -Wedge bar chuck Forkardt F 160 -Quick-change holder rotary flash -4 lathe chisel holders Dimensions: LxWxH 1.5x0.6x1.2 meters / Weight 600Kg

Lead and tension spindle lathe Weiler Matador -Center width: 500 mm -Tip height: 140 mm -Feed range longitudinally over belt: 0.05–0.40 mm/rev -Feed range longitudinally via interchangeable gears: 0.018–0.800 mm/rev - Spindle head: size 5 -Drive: three-phase motor -Speed range: 15–3,550 rpm -Coolant pump -Wedge bar chuck Forkardt F 160 -Quick-change holder Multifix -4 lathe chisel holders -Drill chuck -Moving centering tip Dimensions: LxWxH 1.5x0.6x1.2 meters / Weight 600Kg

Lead and tension spindle lathe Weiler Matador -Center width: 500 mm -Tip height: 140 mm -Feed range longitudinally over belt: 0.05–0.40 mm/rev -Feed range longitudinally via interchangeable gears: 0.018–0.800 mm/rev - Spindle head: size 5 -Drive: three-phase motor -Speed range: 15–3,550 rpm -Coolant pump -Collet device -Wedge bar chuck Forkardt F 16 -Quick-change holder Multifix -4 lathe chisel holders -Drill chuck -Moving centering tip Dimensions: LxWxH 1.5x0.6x1.2 meters / Weight 600Kg

Optimum Lathe D330 x 1000 SG -Center width: 1000 mm -Circumferential diameter over bed: 330 mm -Circumferential diameter over support: approx. 190–200 mm -Spindle bore: approx. 38 mm -Spindle mount: Camlock (mostly D1-4) -Speed range: approx. 70 – 2000 rpm (stepped) -Feeds: longitudinal and flat, automatic -Threading: metric and imperial possible -Motor power: approx. 1.5 – 2.2 kW -Voltage: 400 V / 3 phases -Tailstock mount: MK3 - Spindle holder: MK5 -Work light -Three-jaw chuck -13x Face Plates/Drive Plates -Multifix with 1 steel holder -Machine feet -Lining protection Dimensions: LxWxH 1.9x0.7x1.5 meters / Weight 700Kg

: gebraucht : 2001 : 010191 : prompt, Zwischenverkauf v : Deutschland : 24500 € : 1 : 320 mm : 650 mm : 160 mm : 40 mm : 192 mm : 205 mm : 5 : 5 MK : 16 : 48 - 2500 1/min : 24 : 0.02 - 0.63 mm/U : 0.006 - 0.2 mm/U : 0.25 - 8 mm : 80 - 2 Gänge/ : 0.2 - 4 : 200 - 5 : 150 mm : 100 mm : 40 mm : 3 MK : 85 mm : 2,4 / 3 kW : 1582 mm : 715 mm : 1245 mm : 720 kg Heidenhain 3-axis digital readout NEWRöhm 3-jaw chuck, 160 mm diameter, with internal and external jaws Quick-change tool post with one rectangular insert and one round insert Quick-release collet chuck with collets from 3 to 30,5 mm Live centre Drill chuck Chuck guard Lead and feed screw guard Motor brake Coolant system Mounting feet Operating instructions in German with CE declaration of conformity BUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISE We offer you maximum security and complete transparency. • HONES ...

: neu : Bulgarien : 81780 € : 1545.64 € : 760 mm : 3000 mm : 380 mm : 132 mm : 520 mm : 560 mm : 11 : 140 MK : 17 : 7,5 - 1015 1/min : 150 : 0.039 - 18 mm/U : 0.02 - 9 mm/U : 0.5 - 180 mm : 60 - 1/6 Gänge/ : 0.125 - 45 : 410 mm : 150 mm : 105 mm : 6 MK : 225 mm : 15 kW : 4470 kg driven by conventional transmission 3-axes digital readout quick change toolpostAmestra type Multifix with 4 holders (3 square, 1 round) 3-jaw chuck Bison3295/DIN6350, Ø 400 mm spindle dead center four way rapid traverse device foot pedal brake longitudinal stop for 1 position coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock tailstock quill reducer mechanized movement of tailstock low voltage machine lamp operating manual machine according to ",CE", FURTHER TURNING LENGTHS: t ...

: neu : 2025 : 010105 : prompt, Zwischenverkauf v : Bulgarien : 50210 € : 948.97 € : 1 : 600 mm : 2000 mm : 300 mm : 80 mm : 400 mm : 400 mm : 8 : 90 MK : 21 : 20 - 2000 1/min : 120 : 0.04 - 12 mm/U : 0.02 - 6 mm/U : 64 : 0.5 - 120 mm : 60 - 1/4 Gänge/ : 0.125 - 30 : 315 mm : 130 mm : 90 mm : 5 MK : 230 mm : 7.5 kW : 3600 mm : 1250 mm : 1400 mm : 3110 kg driven by conventional gearbox 3-axes digital readout Fagor 40i quick change toolpostAmestra Multisuisse type C with 4 holders (3 square, 1 round) 3-jaw chuck Bison3204/DIN6350, Ø 250 mm spindle dead center four way rapid traverse device electromagnetic brake longitudinal stop for 1 position coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock low voltage machine lamp operating manual machine according to ",C ...

BOEHRINGER DUE 800 Precision lathe Year of manufacture 1989 3-Axis Digital Display HEIDENHAIN Model ND 780 Center height 400 mm Circumferential diameter over bed 820 mm Circumferential diameter via face slide 515 mm Center width approx. 2,200 mm Turning length effective approx. 2,000 mm Bar Passage 128 mm Spindle head DIN55022 size 11 Drive power 30 kW Max. torque 6,300 Nm 24 speeds: 7.1 – 1,400 rpm. 60 flat feeds 0.05 – 28 mm/rev 60 longitudinal feeds 0.06 – 56 mm/rev Rapid traverse in longitudinal transverse feed Motorized upper support Tailstock quill stroke 280 mm Tailstock Cone MK 6 Space requirement LxWxH approx. 6,700 mm x 2,500 mm x 2,250 mm Weight approx. 7,500 kg Equipment: 3-jaw chuck 400 mm Face Plate 800 mm Steady bezel Fixed bezel Multifix steel holder head Lighting Moving grain tip and much more More photos on request All oth ...

Key data: 588 KW

Make: MAN Model: D2876LE423 Engine type: Four-stroke Direct Injection Cylinders: 6 Output: 588 kW Speed: 2300 rpm Mfg year: 2013 Condition: New and Unused.

Key data: 410 mm, 800 mm

TECHNICAL DATA Lathe Weisser Heilbronn Model No.: SENIOR Y.O.M. 1984 Centerheight 410 mm Swing over bed 810 mm Swing over Support 564 mm Spindle bore 105 mm max Workpieceweight between chuck and Pinole 22 tons Spindlerevolotions 8 -- 1250 Rev/min Main motor 15 kW Rapid traverse longitudinal 4 Jaw chuck 700 mm Moving Protection for guideaways longitudinal Digital Read Out 1 Steady Rest 0 - 130 mm Quick change Toolpost with inserts Coolant

Engine hoist Lotus max 2Ton foldable incl. lifting clamp 2 wheels need to be reassembled Auction-ID: A1-40419-523

Operating Hour: 0 Auction-ID: A1-47913-4

Dimensions (L × W × H in cm): 80 × 120 x 80 Compatibility: See photo Motor installed in machine testing but never used in operation. Auction-ID: A1-47913-7

Dimensions (L × W × H in cm): 80 × 120 x 100 Compatibility: MT1135-135-140-1480 Auction-ID: A1-47913-6

Operating Hour: 0 Auction-ID: A1-47913-5

: neu : Bulgarien : 26210 € : 500.61 € : 325 mm : 750 mm : 165 mm : 32 mm : 190 mm : 200 mm : 5 : 4,5 MK : 2 : 85-405, 470-2200 U/Min : 48 : 0.006 - 1.77 mm/U : 0.003 - 0.885 mm/U : 0.1 - 28 mm : 0.1 - 1.75 : 70 - 4 : 150 mm : 95 mm : 40 mm : 3 MK : 100 mm : 2.2 kW : 2150 mm : 950 mm : 1350 mm : 770 kg driven by variable speed control (2 steps) 3-axes digital readout FAGOR with CSS (constant surface speed) quick change toolpostAmestra with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 160 mm spindle dead center coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock low voltage machine lamp operating manual machine according to ",CE", FURTHER TURNING LENGTHS: turning length1.000 mm € 26.730,- The data for this ad was created with ModulMW ...

Offer 26143 Technical data: - Tip height 165 mm - Center width 750 mm - Turning diameter over bed 330 mm - Turning diameter via face slide 170 mm - Spindle bore 42 mm - Pick-up cone of the tailstock quill MK 3 - Travel of the tailstock quill 140 mm - Spindle speeds 18 - 2000 rpm - Feeds longitudinal + flat - Metric thread pitches - Inch thread - Module thread - Drive 400 V / 1.5 / 2.8 kW - with: - 2 pieces 3 jaw chucks - Bezel - 4 pieces SWS steel holder - Div. Drehmeisel - Space requirement approx. W 1800 x H 1150 x D 900 mm - Weight approx. 800 kg

SAEILO SJ-660/3300 Lead and pull spindle lathe Year of construction 2015 3-axis digital display K&C ARBAH-L Center width 3,300 mm max. tip height 330 mm Turning diameter over 660 mm Turning diameter over face slide 438 mm Bed width 400 mm Spindle mount DIN 55029 - Camlock - size D1-8 Spindle bore 82 mm Spindle speed range 15 - 1,500 rpm, 12 steps Equipment: Four-jaw chuck approx. 300 mm Bezel Coolant Setup Multifix clamping system Machine Light Technical data & installation plan – see PDF. All technical information, illustrations and content are non-binding and without guarantee. Subject to changes, errors. All other accessories visible in the pictures and video are not included in the scope of delivery, therefore not part of this sale. The scope of delivery only includes the accessories that are expressly listed here, in the order confirmation and invoice.  ...

ZMM SLIVEN CU 400 Lead and pull spindle lathe 3-axis digital display MITUTOYO max. turning length 2,000 mm Center height 250 mm Hollow spindle diameter 60 mm Equipment: Three-jaw chuck 250 mm All other accessories visible in the pictures and video are not included in the scope of delivery, therefore not part of this sale. The scope of delivery only includes the accessories that are expressly listed here, in the order confirmation and invoice. FCA (Free Loading Truck) D-32457 Porta Westfalica Packaging only Delivery time immediately Subject to prior sale / payment immediately upon completion of purchase

Auction-ID: A1-47801-153

Auction-ID: A1-47801-162

Auction-ID: A1-47801-158

Auction-ID: A1-47801-157

Offer 26083 Technical data: - Center height / center width 210 / 1500 mm - Largest rotary, Ø over bed / over face slide 420 / 270 mm - Largest turning diameter with removed bridge 640 mm - Length of the bed bridge approx. 270 mm - Spindle bore 58 mm - Pick-up cone of the tailstock quill MK 5 - Travel of the tailstock quill 180 mm - Spindle speeds 45 - 1800 rpm - Feeds - longitudinal 0.031 - 1.70 mm/rev - Flat 0.14 - 0.784 mm/rev - Travel of the upper slide 128 mm - Face slide travel 285 mm - Metric thread pitches - Inch thread - Drive 400 V / 7.5 kW - with: - tailstock, 3-jaw chuck, quick-change steel holder, - Digital display - Space requirement approx. W 2850 x H 1500 x D 1200 mm - Weight approx. 2000 kg

: gebraucht : 2023 : 1675 : prompt, Zwischenverkauf v : Bulgarien : 17600 € : 1 : 325 mm : 1000 mm : 165 mm : 32 mm : 190 mm : 200 mm : 5 : 4,5 MK : 12 : 85 - 2.000 1/min : 48 : 0.006 - 1.77 mm/U : 0.003 - 0.885 mm/U : 0.1 - 28 mm : 75 - 2,5 Gänge/ : 0.1 - 1.75 : 150 mm : 95 mm : 40 mm : 3 MK : 100 mm : 2.2 kW : 2150 mm : 950 mm : 1350 mm : 770 kg demo machine / mint condition net price (price for new machine € 23.970,00) driven by manual transmission 3-axes digital readout Fagor 40i quick change toolpostAmestra with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 160 mm spindle dead center coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock low voltage machine lamp operating manual machine according to ",CE", incl. following optional equ ...

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and status video: https://youtu.be/wUiF5B2PZCY - Former Linde full-service device - Next service due in 739 operating hours - Clear-view mast without central hydraulic cylinder - 3rd valve, sideshift - Semi-cab with windshield wipers - LED front work light - LED work light at the rear - Warning light orange - Comfort seat Auction-ID: A1-48048-249

With fragile and auger ——— 4 excavator buckets ——— rake. Auction-ID: A3-43552-2327

Viewing by appointment Properly working machine power pack KD diesel XL Cummins diesel. Rexroth. hydraulic system. 150 hours. 2011. hydraulic oil flow 575 liters Auction-ID: A1-40383-73

: neu : Bulgarien : 42910 € : 819.58 € : 400 mm : 750 mm : 200 mm : 52 mm : 235 mm : 320 mm : 6 : 6 MK : 4 : 18-98, 48-265, 144-790, 3 U/Min : 80 : 0.015 - 0.6 mm/U : 0.0075 - 0.3 mm/U : 40 : 0.25 - 7.5 mm : 120 - 4 Gänge/ : 0.0625 - 1.875 : 235 mm : 110 mm : 50 mm : 4 MK : 100 mm : 7.5 kW : 1530 kg driven by variable speed control (4 steps) 3-axes digital readout FAGOR with CSS (constant surface speed) quick change toolpostAmestra with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 200 mm spindle dead center coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock low voltage machine lamp operating manual machine according to ",CE", FURTHER TURNING LENGTHS: turning length 1.000 mm € 43.630,- The data for this ad was created with ModulMWS ...

Equipped with: Diesel engine Deutz 2 cylinder diesel. HIAB hydraulic loader crane type 852-2235A, serial number 1010, built in 1980, equipped with hydraulic extension boom and swivel device, with an estimated dead weight of 2,000-2,500 kg, a working range of approximately 6-8 m and a lifting capacity of approximately 3,000-5,000 kg depending on the flight. transport dimensions of approximately 4.0 x 2.2 x 2.4 m (LxWxH), Auction-ID: A1-47376-266

: neu : ca. 4 Monate ab Auftragse : Bulgarien : 46970 € : 897.13 € : 500 mm : 1500 mm : 250 mm : 80 mm : 300 mm : 400 mm : 8 : 80 MK : 21 : 20-2000 1/min : 120 : 0.04 - 12 mm/U : 0.02 - 6 mm/U : 64 : 0.5 - 120 mm : 60 - 1/4 Gänge/ : 0.125 - 30 : 240 - 1 : 315 mm : 130 mm : 90 mm : 5 MK : 230 mm : 7.5 kW : 3100 mm : 1250 mm : 1400 mm : 2820 kg driven by manual transmission 3-axes digital readout quick change toolpostAmestra with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 250 mm spindle dead center longitudinal stop for 1 position coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock low voltage machine lamp operating manual machine according to ",CE", FURTHER TURNING LENGTHS: turning length1.000 mm € 45610,00 turning length2.000 mm  ...

: gebraucht : 2020 : 1658 : prompt, Zwischenverkauf v : Bulgarien : 26500 € : 1 : 22600 € : 400 mm : 1000 mm : 200 mm : 52 mm : 235 mm : 320 mm : 6 : 6 MK : 12 : 50-2.240 1/min : 80 : 0.015 - 0.6 mm/U : 0.0075 - 0.3 mm/U : 40 : 0.25 - 7.5 mm : 120 - 4 Gänge/ : 0.0625 - 1.875 : 235 mm : 110 mm : 50 mm : 4 MK : 100 mm : 4 kW : 2750 mm : 1100 mm : 1600 mm : 1540 kg This machine is used in our workshop for repair work, therefore it has only been used very little so far. (New price € 37,910.00) driven by manual transmission 3-axes digital readout Fagor 40i quick change toolpostMultifix Type Bwith4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 200 mm spindle noseNr. 6 DIN 55027 four way rapid traverse device spindle dead center coolant equipment 1 pce. flange plate for lathe chuckØ 200 mm 1 adapter sleeve full length rear splash guard leadscrew and shaft protection saf ...

: neu : Bulgarien : 58370 € : 1103.19 € : 600 mm : 2000 mm : 300 mm : 80 mm : 400 mm : 400 mm : 8 : 90 MK : 3 : 20 - 100, 80 - 400, 400 - U/Min : 120 : 64 : 0.5 - 120 mm : 60 - 1/4 Gänge/ : 0.125 - 30 : 315 mm : 130 mm : 90 mm : 5 MK : 230 mm : 11 kW : 3600 mm : 1500 mm : 1650 mm : 3110 kg In contrast to the universal lathes, here the adjustment of the revolutions is infinitely variable by means of a frequency inverter. It is possible to ensure a ",constant cutting speed", (V-const), i.e. when changing the diameter to be machined, the speed remains unchanged and thus a higher accuracy and smoothness of the surface is achieved. At the customer&apos,s request, the machines can be manufactured with a reading of the linear displacement and positioning by mounting a digital display. driven by variable speed control (3 steps) 3-axes digital readout Fagor with CSS (constant surface ...

• Manufacturer: Mercedes-Benz • Model: Vito (W639) panel van • Year of manufacture: 2004 • Version: Iglhaut all-wheel drive conversion (4x4) • Mileage: 288,864 km (read) • Fuel: Diesel • Transmission: Manual • Engine turns, but does not start • Vehicle not roadworthy • All-wheel drive components available • Closed box structure • Off-road reduction (creeper gear) • General signs of wear according to age and use • Former use as a workshop vehicle • No vehicle documents available • Sale as defective / hobbyist vehicle / parts carrier Auction-ID: A1-47153-9008

Volkswagen Sharan United 1.9 TDI automatic. Registration date: 07.11.2008 Mileage: 368,929 km Equipment: - Automatic transmission - Parking heater - Automatic climate control - Original VW navigation system (MFD) - Roof rails - Trailer hitch - 7 seats - ESP - Bösenberg van racking system with partition wall and rear extension Vehicle comes from the stock of Rundfunk Berlin-Brandenburg (RBB). Special feature: At 330,428 km, a hull engine was replaced in an authorized VW workshop. Proof of invoice for approx. 9,850 EUR available. Since the engine was replaced, only about 38,500 km have been driven. Known Defects: - Paint scratches and abrasion marks on both sides of the vehicle - Rear left bumper damaged/scratched - Exterior mirrors on the right with signs of use - Condensation in both rear lights - Signs of wear and tear due to age and mile ...

turning diameter: 360 mm turning length: 1000 mm swing diameter over bed slide: 215 mm reus: 30 - 3000 U/min spindle bore: 38 mm feed: längs 0,043 - 0,653 m/min total power requirement: 3,5 kW weight of the machine ca.: 1500 kg dimensions of the machine ca.: 1900 x 900 x 1300 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Reconditioned Caterpillar 3116 long-block engine., Reconditioned with quality parts and delivered with 12 months warranty., Used engines available. Spare parts available., We build engines according to serial numbers of the old engines., Contact our sales on www.hamofa.be, , überholt, gebraucht, Teile, reconditionné, utilisé, pièces, reacondicionado, utiliza, piezas., , 45V; Gross weight [kg]: 950; Engine: CATERPILLAR 3204

Complete reconditioned Caterpillar 3304 engine., Reconditioned with quality parts and delivered with 12 months warranty., Used engines available. Spare parts available., We build engines according to serial numbers of the old engines., Contact our sales on www.hamofa.be, , überholt, gebraucht, Teile, reconditionné, utilisé, pièces, reacondicionado, utiliza, piezas., , 02B: 7N3272, 05B: 7N3278, 07Z: 1167579 1259359 1259360 1266209 1298178 1322010 0W0178 0W2002 0W2254 0Z7504 2W1876 2W3989 2W4485 2Y8607 2Y8609 3Q5155 4P2393 4P2394 4P4246 4P4247 4P4253 4P5557 4P9154 4P9308 4Q5014 4Q5161 5R4901 5R5450 9Y1721 9Y3047 0Z7863 0Z8210 1079408 1079409 1079410 1157533, 09Z: 1167590 1167591 1167592 1167598 1W4584 2W0098 2W4485 2W6099 2W6100 4P0903, 10E: 1118013 1118014 2310150 1W3871 1W3875 1W3876 1W3877 1W3880 1W3883 1W3885 4W3918 4W6878 4W7765 9Y6208, 12Z: 602529 1148904 0Z8258 1N3062 1N3063 1W4 ...

Complete reconditioned Caterpillar 3306 engine., Reconditioned with quality parts and delivered with 12 months warranty., Used engines available. Spare parts available., We build engines according to serial numbers of the old engines., Contact our sales on www.hamofa.be, , überholt, gebraucht, Teile, reconditionné, utilisé, pièces, reacondicionado, utiliza, piezas., , 08Z: 1373598 2123756 0W0997 0W1007 0W1766 0Z5948 0Z7485 0Z7500 0Z7665 0Z7771 0Z7860 0Z7900 0Z7915 0Z9864 1N3060 1N3061 1W0542 1W0543 1W0544 1W1342 1W1344 1W1346 1W2630 1W3210 1W3225 1W3231 1W5821 1W6092 1W6093 1W9098 2W0817 2W0818 2W0819 2W0820 2W4483 2W4486 3Q5034 3Q5466 3Q5755 3Q5767 3Q6852 4P7467 4Q5200 4W8491 5C5604 5C6813 5R6935 5R7776 5R7814 5R7956 5Z4836 5Z5151 5Z5168 5Z5358 5Z5912 5Z6635 5Z6854 5Z7500 5Z7665 5Z7860 5Z7900 5Z7915 5Z8438 5Z9020 5Z9864 5Z9904 5Z9917 6N3055 6N5908 6Z7065 7C0501 7C1426 7C1959 7C2032  ...