gas engine spare used for sale

Engine Brand: DEUTZ, Condition: NEW, Nominal Power @ Nominal Rpm: 200 Kw, Bore: 108 mm, Stroke: 130 mm, Engine Capacity: 7145 cc, Qty Cylinders: 6 Qty, Engine Fuel Type: DIESEL , Engine Cooling Type: Radiator Cooled (std) , Engine Color: Black , Flywheel Housing SAE: SAE 4 , Flywheel SAE: Unknown , Engine Condition: New , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: yes , Starter Voltage: 24 Volt , Rated Power: 180 Kw, Rated Speed: 1800 Rpm, Injection Type: ECU (Electronic Control Unit) , , https://www.hamofa.com/stock/diesel-engines/deutz-tcd2013l06-2v-new/54 9, , = More information =, , Type: Engine, Type of fuel: Diesel, Type number: TCD2013L06 2V; Transport weight [kg]: 750

Engine Brand: VOLVO, Conditie: USED, Engine Injection Type: DIRECT , Engine Aspiration Type: TURBO , Air Cooling Type: WATERCOOLED INTERCOOLER , Bore: 144 mm, Stroke: 165 mm, Engine Capacity: 16200 cc, Qty Cylinders: 6 Qty, Engine Fuel Type: DIESEL , Engine Cooling Type: Radiator Cooled (std) , Engine Color: Green , Flywheel Housing SAE: SAE 1 , Flywheel SAE: Unknown , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: no , Starter Voltage: 24 Volt , Injection Type: Mechanical Fuelpump , , https://www.hamofa.com/stock/diesel-engines/volvo-td164kae-used/363, , = More information =, , Type: Engine, Type number: TD164KAE; Transport weight [kg]: 1600

turning diameter over bed: 400 mm turning diameter over slide rest: 245 mm turning length: 800 mm total power requirement: 4.5 kW weight of the machine ca.: 1.25 t required space: 1.96x1.69x1.06 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 440 mm turning diameter over slide rest: 240 mm turning length: 1500 mm spindle bore: 55 mm faceplate: 550 mm steady: 140 turning speeds: 40-1800 U/min digital readout: Haidenhain bed width: 340 mm steady: 140 mm 3-jaw chuck: 250 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Chip conveyor can be purchased as an option for €7,500 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 440 mm turning diameter over slide rest: 240 mm turning length: 1500 mm spindle bore: 55 mm faceplate: 400 mm turning speeds: 40-1800 U/min digital readout: Haidenhain bed width: 340 mm 3-jaw chuck: 250 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Chip conveyor can be purchased as an option for €7,500 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 520 mm turning diameter over slide rest: 340 mm turning length: 1000 mm spindle bore: 55 mm faceplate: 400 mm turning speeds: 33,5-1600 U/min digital readout: Haidenhain bed width: 340 mm 3-jaw chuck: 250 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Chip conveyor can be purchased as an option for €7,500 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 600 mm turning diameter over slide rest: 360 mm turning length: 2250 mm spindle bore: 63 mm faceplate: 500 mm turning speeds: 11,2-2000 U/min digital readout: Haidenhain bed width: 350 mm 3-jaw chuck: 300 mm steady: 160 mm Rapid travel: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Chip conveyor can be purchased as an option for €7,500 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Caterpillar C18 - Unused - 455 HP - T2P

Caterpillar C7 - Used - 453 HP - C7B

Caterpillar 3516 DITA - Used - 2200 HP - 29Z

Swing over the bed: 1250mm Max length of the workpiece: 10000mm Max mass of the workpiece at machining between centres with rest: 10000kg Height of the cutting tool set in tool holder: 50mm

turning diameter over bed: 1420 mm turning diameter over slide rest: . mm turning length: 3150 mm faceplate: 500 mm turning speeds: 176 U/min steady: 160 mm total power requirement: kW weight of the machine ca.: 15,68 t dimensions of the machine ca.: m Chip conveyor can be purchased as an option for €7,500 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Digital Turning diameter 120 mm Turning length 700 mm Spindle speed 2000 min-1 Tailstock

Key data: 400 , 800 , 1000

Center distance 6000 mm Height of centers 400 mm Max diameter on the bench 800 mm Max diameter on the carriage 520 mm Max diameter in the recess 1100 mm Bar passage 130 mm Undercarriage stroke notes 340 mm TURRET Standard BENCH Max weight between tips 3500 Kg Max weight on steady rests 4500 Kg Pallet width 520 mm TAILSTOCK Steerer diameter 115 mm Steerer stroke 380 mm Cone cm6 HEAD Spindle power 25 Kw Spindle speed 5/1000 Rpm 11" cam-lock spindle attachment Spindle torque 560 Nm GiVi axis display measurements Self-centering 500 Use and maintenance books Yes Wiring Diagrams Yes Protections yes Ready for availability Visible in the warehouse in operation

Key data: 140 mm, 280 mm

Zimas D290V - Lathe Special price € 2,800 instead of € 3,490 excl. VAT - 2-axis position indicator - Stepless speed adjustment with digital display - Plan feed - Camlock mount C4 - Upper slide can be rotated 360° - Tailstock adjustment +/- 5 mm for taper turning Accessories - Undermount with 1x door & 3x drawer - Three-jaw chuck 160 mm with interchangeable jaws - Fixed bezel - Centering tip - Operating tools Specifications Range: - Circumferential Ø over bed: 290 mm - Circulating Ø over cross slide: 180 mm - Turning length between tips: 700 mm - Bed width: 182 mm Headstock: - Spindle bore: 38 mm - Spindle nose: MK5 - Speed levels: infinitely variable - Speed range: 80 - 2000 rpm Feed: - Metric threads: 0.2 - 3.5 mm / 18 steps - Inch thread: 8 - 56 dpi / 21 levels - Longitudinal feed: 0.085 - 0.832 mm - Transverse feed: 0.01 - 0.10 mm Sleds a ...

Center height: 300 mm Center width: 1000 mm Circumferential Ø: over bed 610 mm Spindle bore: 71 mm Spindle mount: size 8 Pick-up cone tailstock: 5 MK Spindle speeds: approx. 11.2 - 1800 rpm Feeds: longitudinal/flat 0.014-16/0.063-7 mm/rev Thread pitches: 0.1 - 112 mm Electrical connection: 380 V, approx. 5.5 kW Space requirement: 2900 x 1450 x 1750 mm

Center height: 400 mm Center width: 1250/1300 mm Circumferential Ø: over bed 440 mm Spindle bore: Spindle holder: Pick-up cone tailstock: 5 MK Spindle speeds: 11.2 - 2240 rpm Feeds: longitudinal/flat 0.1-2.8/0.05-1.4 mm/rev Thread pitches: Electrical connection: 380 V, 11 kW Space requirement: 3400 x 1400 x 1300/1700 mm Weight: approx. 2700 kg

turning diameter over bed: 410 mm turning diameter over slide rest: 240 mm turning length: 1000 mm centre height: 205 mm centre distance: 1000 mm spindle bore: 47 mm spindle turning speed range: 28 - 1250 U/min feeds - longitudinal: 0,03 - 8,8 mm/U feeds - cross: 0,006 - 1,84 mm/U thread - mm pitch: 0,25 - 76 mm thread - inch: 1/2 - 152 Gg/ thread - module: 0,25 - 22 mm bed width: 320 mm tailstock quill diameter: 55 mm tailstock taper MT: 4 face slide travel: 290 mm upper slide travel: 120 mm total power requirement: 5,5 kW weight of the machine ca.: 1,3 t dimensions of machine L x W x H: 2,32 x 1,15 x 1,22 m Accessories: 3-jaw chuck RÖHM 160 mmø, MULTIFIX-head with 2 inserts, solid steady, running center, coolant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 1100 mm turning diameter over slide rest: 650 mm turning length: 3500 mm spindle bore: 108 mm faceplate: 1000 mm steady: 500 Control: Siemens type: 840 D bed width: 750 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: 6,5x2x1,8 m Chip conveyor can be purchased as an option for €7,500 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 0360 mm : 215 mm : 1000 mm : 180 mm : 45 mm : 3,75 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 0350 mm : 196 mm : 0650 mm : 170 mm : 42 mm : 7,5 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 0360 mm : 215 mm : 1000 mm : 180 mm : 45 mm : 2,25/3,25 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 0330 mm : 210 mm : 0635 mm : 167 mm : 40 mm : 2,2 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 0390 mm : 240 mm : 1000 mm : 190 mm : 54 mm : 5,5 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 360 mm turning diameter over slide rest: 220 mm turning length: 1000 mm turning diameter in the gap: 380 mm turning speeds: 70 - 2000 U/min centre height: 180 mm spindle bore: 50 mm tailstock quill taper MT: 3 MK connected load frequency: 230 oder 400 V total power requirement: 1,8 kW weight of the machine ca.: 0.65 t dimensions of the machine ca.: 2,0 x 0,8 x 1,56 m Professional industrial machine 3-axis digital display 3-jaw chuck 180 mm. 4-jaw chuck 200 mm. Faceplate 280mm Bezel fixed Bezel rotating 4-fold steel holder. Halogen machine light Machine light Foot brake removable chip tray, chip protection wall Hardened and ground bed rails Complete coolant system Feed protection Machine tools The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Tip height: 250 mm Center width: 2000 mm Circumferential Ø: over bed 500 mm Spindle bore: 50.8 mm Spindle holder: size 6 Pick-up cone tailstock: 5 MK Spindle speeds: 22 - 2000 rpm Feeds: longitudinal/flat 0.05-6.4/0.025-3.2 mm/rev Thread pitches: 80 - 1 mm Electrical connection: 380 V, 5.5 kW Space requirement: 3600 x 1100 x 1500 mm Weight: 1875 kg

Tip height: 205 mm Center width: 1500 mm Circumferential Ø: over bed 410 mm Spindle bore: 47 mm Spindle holder: size 6 Pick-up cone tailstock: 4 MK Spindle speeds: 28 - 1250 rpm Feeds: longitudinal/flat 0.03-1.3/0.008-0.33 mm/rev Thread pitches: 0.25 - 76 mm Electrical connection: 380 V, 3 kW Space requirement: 2800 x 1100 x 1600 mm Weight: 1330 kg

Offer 24177 Specifications: - Tip height 180 mm - Center width 1000 mm - larger circulation – Ø over bed 355 mm - via flat sleds approx. 200 mm - Spindle bore 36 mm - Pick-up cone of the tailstock quill MK 5 - Travel of the tailstock quill 260 mm - Spindle speeds 18 - 1800 rpm -Feeds - Travel of the cross slide approx. 200 mm - Travel of the upper slide approx. 115 mm - Drive 400 V / 5.8 kW - with: - Tailstock, 3-jaw lining, bezel - Steel holder, moving center punch, - Chip tray - Space requirement approx. W 2500 x H 1500 x D 1200 mm - Weight approx. 2100 kg

Key data: 1059 KW, 1500 1/min

Mitsubishi S16N - PTA Diesel Generator 1059 kW, low running hours Mitsubishi S16N - PTA Diesel Generator Description: The Mitsubishi S16N - PTA is a 1059 kW diesel generator designed for industrial use. It provides reliable power for large applications, powered by a Mitsubishi S16N engine. This model is built for durability and efficiency, offering long-term performance with minimal maintenance. Technical Specifications: Model: S16N - PTA Year: 1989 Power Output: 1059 kW / 1320 kVA Engine Type: Mitsubishi S16N (16-cylinder, naturally aspirated) Fuel Type: Diesel Speed: 1500 RPM Voltage: 400/230 V Frequency: 50 Hz Cooling System: Water-cooled Alternator: Synchronous, brushless Fuel Consumption: 210-220 g/kWh (approx.) Starting System: 24V electric start Feel free to contact if you require any further information, contact us at: Info@ukpowergeneratorsl ...

Key data: 588 KW, 380 1/min

In very good condition Rotating Removed due to scrapping of ship

Peugeot Citroen PSA HM01 1.5 VTI engine parts. Parts taken from one petrol engine with ca. 50.000 km. Parts are: motor head, main block, pistons, main shaft, oil pan, oil pump and all bolts.

Manufacturer: Engel Verstellmotor Geräteträger, Year: 1994, Type: Serie A/GNM 4150-B5.2, Volt/Hz: 42/3,1 mpere, pm: 3000, Year :1994

Manufacturer: Perske Umformer, Type: 30 DW 14/2, Hz 1: 50, Hz 2: 100, KVA: 30,

Manufacturer: Perske Umformer, Type: DA 12-2, Amper 1: 43, Hz 1: 50, Hz 2: 100,

Manufacturer: IMA, Motor mit Getriebe: yes, Getriebe: K803AB0570D132L4, Amper 1: 50, Power kW: 9,2, N1-U/min: 1598, Motor mit Getriebe: yes, Getriebe: K803AB0570D132L4, Year :1996

Manufacturer: Perske Fräsmotor Hydrospindel, Type: Fräsmotor, Maschinennummer: KCS 72.24-2 D, aus Maschine: Homag, Amper 1: 22,5/13/20, Hz 1: 50/100/120, Power kW: 7/11, Speed rpm: 2870/5880,

Manufacturer: Indramat Permanent Magnetmotor , Type: MDD112B-N-040-N2L-130GA0, Motor with gear: n 4000 Umin, Gear: Km 0,42 Nm/4, Maschinennummer: MDN 17,5, From machine: IDN 41,5,

Manufacturer: IMA , Type: Fügefräsen, Motor with gear: 2 Motoren steuerbar und verstellbar, Spindle length mm: ca.60, Motor with gear: 2 Motoren steuerbar und verstellbar, Speed rpm: ca.2,2 kw/5860 , Overhauled on: inkl. Haube,

Manufacturer: SEW Getriebemotor 20 Hohlwelle 0,25 kw, Type: SA 37/T DR63L4/TH, Motor with gear: yes, From machine: Transportband, Power kW: 0,25, Volt/Hz: 220-380/50, pm: 1300/30/1600/37, Motor with gear: yes, Bore mm: 20, FREE TEXT: Mit Drehmomentstütze,

Manufacturer: IMA Kantenfräsen tastend von oben, V1: 133, Hz 1: 200, Power kW: 1,8, Speed rpm: 11575,

Manufacturer: IMA, Type: Radiusfräsen, Gear: 2 Motoren tastend oben und Seite, Power kW: 1, Volt/Hz: 133, pm: 11500, Gear: 2 Motoren tastend oben und Seite,

Manufacturer: SEW-Motor mit Antriebsriemen, Type: K 37 DT 80, Motor with gear: yes, Maschinennummer: 50.01013736.01.0001.02.03, Power kW: 0,75, Motor with gear: yes, Speed rpm: 2700/303.0,

Manufacturer: Siemens Achsmotor für Ima Maschine, Type: 1FK6063-6AF71-1AG0, Motor with gear: yes, Maschinennummer: YF M110 5834 02 003, From machine: IMA BIMA, Motor with gear: yes,

Manufacturer: Heesemann Spindelhubgetriebe 2 Stück, Type: aus Heesemann LSM 8, Motor with gear: 2 Stück Verstellung Schleifaggregate, Motor with gear: 2 Stück Verstellung Schleifaggregate,

Manufacturer: Heesemann Spindelhubgetriebe, Type: aus LSM 8, Year: 2 Stück, Year :2 Stück

Manufacturer: Heesemann Motor Querschleiffaggregat ATB Loher, Type: AF 160 L/4/2F-21, Maschinennummer: 3716729-20, From machine: Heesemann Schleifmaschine, Volt: 400, cos: 0.90/0.95, IP: 54, Power kW: 13/17, Volt/Hz: 400, pm: 1470/2945,

Manufacturer: Heesemann Motor Vorschub Transport mit Gebtriebe, Year: ca.1996, Motor with gear: yes, Gear: Stöber Getriebe, From machine: Heesemann LSM , Motor with gear: yes, Gear: Stöber Getriebe, Flange motor design: yes, Bore mm: Hohlwelle 60 mm, FREE TEXT: Hohlwelle 60 mm, Year :ca.1996

Manufacturer: Perske Fräsmotor, Type: KNS 70.12.-2-01, Btr:: 12-6,9, Schaltgr.: 50-100, Iso/kl: 3/4,4, IP: 220-380, MdN Nm: 2880/5880, Motor mit Getriebe: yes, machine ready for demonstration: Frässpindel 30 mit Keilnut 10 mm/ mit Aufsatzgetriebe für Höhere Drehzahlen/ein und Aussteuerbar,

Manufacturer: Siemens, Type: Synchron-Servomotor 1FK6, Year: 2000, Motor with gear: no, Maschinennummer: MO99 5712 01 003, From machine: IMA BIMA 410, Volt: 270, Ampere 1: 4,5, IP: 64, Motor torque Nm: 6.0/4.0, pm: 3000/3900, Series: 1FK6060-6AF71-1TB0, Motor with gear: no, with motor brake: Ja, FREE TEXT: Brake 24 V/ 15,6 W , 6-poliger Motor, 100K, 3000 1/min selbstgekühlt, IM B5 (V1, V3) Leistungs-/Signalstecker Stecker 270 Grad drehbar, Year :2000

Manufacturer: Weeke Fräsmotor C-Achsmotor SMZ-Indramat, Type: SMZ DIS.E13676/Indramat MKD041B-144-KG0-KN, Hz 1: 800, Power kW: 7,5, Volt/Hz: 315/380/400/482, pm: 12000/14450/24000,