gas engine power used for sale

In working order Diameter flywheel (outside of housing) 556mm. Auction-ID: A1-47393-297

Consisting of: lower block, connecting rods, camshaft, cylinder liners, pistons, injectors, starter motor, flywheel, gaskets, fuel filter housing, water pump, engine pulley, exhaust manifold, engine oil filter, fuel filter, cover caps, various fasteners, gaskets, pipes. Auction-ID: A1-47393-308

With a total width of only 88 cm, this machine is particularly suitable for gardens, renovation projects, narrow passages and other locations where larger excavators are difficult to use. The machine is equipped with a swivel stick (side swing), which allows the boom to be hydraulically placed sideways. This makes it possible to work closer to walls, fences, foundations and other obstacles. The DLM950 is powered by a 7.0 kW KOOP motor - maximum digging depth: 1,715 mm, maximum digging height: 2,600 mm and maximum digging reach: 3,065 mm - supplied with a 400 mm wide digging bucket with a capacity of 0.022 m³. The rubber tracks are 180 mm wide and combine good stability with limited loads on paved surfaces. At the front there is an 840 × 240 mm dozer/stabilizer blade, suitable for grading, pushing back soil and extra stability during operation - The machine also has joystick control, ho ...

max. turning length: approx. 800 mm, centre height: approx. 150 mm, hollow spindle diameter: approx. 50 mm, with 3-axis digital display, Fabr. ELESTA, type: VISULESTAIIE, with multifix steel holder, magnetic chuck, coolant device, splash guard and machine light as well as various machine accessories

Key data: 250 mm, 2240 U/min

max. turning length: 1000 mm, center height: 250 mm, hollow spindle diameter: 60 mm, max. speed: 2240 rpm, with 3-jaw chuck, Fabr. SCHUNK, type: ROTA-S-PLUS, diameter: 250 mm, with machine light, steady rest and Multifix steel holder

Kubota engine 2 cylinder diesel engine Type z482 Engine does not run due to too little compression Total operating hours 60 Incl starter motor and then alternator and v belt Auction-ID: A1-40324-51

Suitable for model KRAMER 41632 4X, dimensions engine 750x650x750 mm Auction-ID: A1-50849-294

Transport dimensions 1240x830x1150 mm Auction-ID: A1-50849-274

: gebraucht : 1992 : 010190 : prompt, Zwischenverkauf v : 17900 € : 1 : 320 mm : 650 mm : 160 mm : 40 mm : 192 mm : 205 mm : 5 : 5 MK : 16 : 48 - 2500 1/min : 24 : 0.02 - 0.63 mm/U : 0.006 - 0.2 mm/U : 0.25 - 8 mm : 0.2 - 4 : 150 mm : 100 mm : 40 mm : 3 MK : 85 mm : 2,4 / 3 kW : 1582 mm : 715 mm : 1245 mm : 680 kg Heidenhain 3-axis digital readout NEWRöhm 3-jaw chuck, 160 mm diameter, with internal and external jaws Quick-change tool post with one rectangular insert and one round insert Live centre Drill chuck Chuck guard Lead and feed screw guard Motor brake Coolant system Mounting feet Operating instructions in German BUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISE We offer you maximum security and complete transparency. • HONEST INSIGHTS: Detailed photos and functional videos of the current condition • LIVE ON-SITE CHECK: Live testing is possible at our fa ...

Key data: 2000 KW, 1000 1/min

MWM Deutz TBDG 441 BV16, dual fuel, Gas, Diesel, Year 1993, also spare parts for sale, turbocharger, injection pump, cylinder heads, crankshaft, ec. ec. Price per piece

turning diameter over bed: 297 mm turning diameter over slide rest: 160 mm turning length: 500 mm spindle bore: 36 mm turning speeds: 30 - 3550 U/min spindle nose: Kurzkegel Gr.5 DIN 55022 tailstock quill taper MT: 3 total power requirement: 2,2 kW weight of the machine ca.: 0,7 t dimensions of the machine ca.: 1,511,5 m On customer order - Private machine - Accessories: 3-jaw chuck 4-jaw chuck Collet chuck with lever clamping Multifix A + various holders Operating tool Various turning tools Original documentation The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Industrial engine with hydraulic pump ID: 2037/R Manufacturer : Irion-Car The part is technically in good condition, Nevertheless, this is an original used items, which shows signs of wear. Scope of delivery can be found in the photos. Internal number: 618 688 397695580530

equipped with 4 extendable shelves, dimensions: L2690 x W1010 x H1010 mm Auction-ID: A1-50060-172

greates pass round over bed: 320 mm turning dia. over face-slide: 198 mm centre height: 160 mm turning length: 650 mm spindle turning speed range: max. 3.000 U/min spindle passage: 40 mm tailstock quill taper MT: 3 quill stroke: 85 mm total power requirement: 4 kW weight of the machine ca.: 0,68 t dimensions of the machine ca.: 1582 x 715 x 1145 m Well-maintained machine from a vocational school Accessories/Equipment: - CE marking - WEILER 3-axis digital readout - Multifix tool post - 3 Multifix tool holders - KLOPFER 160 mm 3-jaw chuck - KLOPFER 160 mm 4-jaw chuck - Various sets of clamping jaws - Safety drive plate - 34 collets - Collet clamping system - Drill chuck - Live center - Various machine keys/wrenches - Machine mounts/feet - Work light - Chuck guard with electrical cut-off - Coolant pump - Operating manual and circuit diagrams The data for this ad was created with ModulMWS  ...

Briggs and Stratton Gasoline Engine XR Auction-ID: A1-50853-58

Engine 225 cc in original box; Auction-ID: A1-50853-17

RIPPA R330 mini excavator from 2023, equipped with a 3-cylinder Kubota diesel engine, offered in a very good general condition and having been used very little. Weighing around 2,850 kg, this compact machine is ideal for earthmoving, landscaping, green spaces, trenches, light foundations or construction site work with limited access. The machine has a closed glazed cab, offering good visibility and more comfort for the operator. It is equipped with joystick controls, a heating/ventilation system, a digital control screen, as well as a camera screen installed in the cabin. Visible equipment and features: Kubota diesel engine RIPPA R330 model year 2023 Weight approx. 2,850 kg Engine power approx. 17.1 kW closed cabin Heating/ventilation digital screen Camera rotating beacon Work lighting rubber tracks Leveling front blade hydraulic arm with auxiliary circuit Tine ear ...

Iveco AIFO Marine Diesel Engine with ZF Marine Transmission Used marine diesel engine assembly equipped with a ZF marine transmission. The engine includes twin MANN W 1170/7 oil filters, a Bosch 24 V electronic control module, turbocharger, intake and exhaust system, hoses and associated pipework. Manufacturer: Iveco AIFO Engine type: Marine diesel engine Oil filters: 2 x MANN W 1170/7 Control system: Bosch 24 V electronic control module Transmission manufacturer: ZF Transmission part list number: 3215004655 Transmission ratio: 2.07 Transmission oil: SAE 30, approximately 7.0 l Clutch oil pressure: 20 Approximate dimensions: 1,800 x 1,100 x 1,300 mm Approximate weight: 1,200 kg The engine and transmission are offered in used condition with visible surface corrosion, weathering, paint deterioration and wear on hoses and pipework. The engine, gearbox, control ...

JPC HT18 mini excavator with KUBOTA 3-cylinder MOD D722 engine, liquid-cooled, equipped with extendable undercarriage, boom swing, zero tail swing rotation, control joystick, hammer attachment, digital controls, year 2024, never used - 0 hours Overall dimensions: 2500 x 1100 x 2500 mm Weight: 1700 kg Auction-ID: A7-50798-337

With a total width of only 88 cm, this machine is particularly suitable for gardens, renovation projects, narrow passages and other locations where larger excavators are difficult to use. The machine is equipped with a swivel stick (side swing), which allows the boom to be hydraulically placed sideways. This makes it possible to work closer to walls, fences, foundations and other obstacles. The DLM950 is powered by a 7.0 kW KOOP motor - maximum digging depth: 1,715 mm, maximum digging height: 2,600 mm and maximum digging reach: 3,065 mm - supplied with a 400 mm wide digging bucket with a capacity of 0.022 m³. The rubber tracks are 180 mm wide and combine good stability with limited loads on paved surfaces. At the front there is an 840 × 240 mm dozer/stabilizer blade, suitable for grading, pushing back soil and extra stability during operation - The machine also has joystick control, ho ...

MWM Inline Six-Cylinder Turbocharged Diesel Engine Large MWM marine/industrial diesel engine with mechanically governed fuel injection, liquid cooling and charge-air intercooling. Manufacturer: MWM Configuration: Inline six-cylinder diesel engine Induction: Turbocharged with charge-air cooler Fuel system: Mechanical injection with six high-pressure injection lines Equipment: Injection pump, turbocharger, charge-air cooler, starter, alternator, filters, cooling system, pipework and flywheel/coupling assembly Charge-air cooler: Ladeluftkühler by Motorenfabrik Langenstein & Reichert GmbH & Co. KG Condition: Used, stored outdoors Approximate dimensions: 2,200 × 1,100 × 1,450 mm Approximate weight: 2,500 kg The engine appears substantially complete but shows surface corrosion, oxidized fittings, deteriorated paint and weathering from prolonged storage. So ...

MWM Six-Cylinder Diesel Generator Set Open-frame stationary diesel generator set comprising an MWM inline six-cylinder diesel engine directly coupled to an AC alternator. Manufacturer: MWM Configuration: Inline six-cylinder diesel engine Fuel system: Individual mechanical fuel-injection elements and lines Cooling: Liquid-cooled Equipment: Dry-type air cleaner, dual fuel filters, starter, charging equipment, cooling system and separate control panel Monitoring: Carlo Gavazzi Mini TOL 122B alarm and monitoring unit Hour counter: Approximately 3,168 hours, photo-indicated Condition: Used, stored outdoors Approximate dimensions: 2,600 × 1,050 × 1,500 mm Approximate weight: 2,200 kg The generator set appears substantially complete but shows widespread corrosion, oxidation, dirt, biological debris, aged hoses and weathered wiring. Portions are wrapped for storage ...

Should still work, without diesel cases. Check before use. Auction-ID: A3-46137-17557

JPC HT18 mini excavator with KUBOTA 3-cylinder MOD D722 engine, liquid-cooled, equipped with extendable undercarriage, boom swing, zero tail swing rotation, control joystick, hammer attachment, digital controls, year 2024, never used - 0 hours Overall dimensions: 2500 x 1100 x 2500 mm Weight: 1700 kg Auction-ID: A7-50798-399

Used Auction-ID: A1-50849-542

HT25 model crawler mini excavator, equipped with 360 degree rotation fifth wheel, swing arm, control joystick, auxiliary system for hammer, electronic controls, 3-cylinder Kubota D1105 water-cooled engine, with self-braking recessed track engines never used, 0 hours The color of the excavator may vary according to availability (yellow, red, other) NEVER USED Overall dimensions: 2900 x 1500 x 2500 mm Weight: 2400 kg Auction-ID: A7-50796-40

Without rail pressure sensor, rail tube, with cut wiring harness FKHXL2.48TCR Used Auction-ID: A1-50849-558

- tank is empty - including conduit to first coupling, without other piping - dimensions approx. H400xØ210cm - To be dismantled by the buyer, on the instructions of the person in charge on site - Supply power cable including up to wall/ceiling mounting Auction-ID: A1-50974-10

JPC HT18 mini excavator with KUBOTA 3-cylinder MOD D722 engine, liquid-cooled, equipped with extendable undercarriage, boom swing, zero tail swing rotation, control joystick, hammer attachment, digital controls, year 2024, never used - 0 hours Overall dimensions: 2500 x 1100 x 2500 mm Weight: 1700 kg Auction-ID: A7-50796-383

7 Pieces new Honda GX270UT2X SXQ4 R-280 Honda GX270UT2X SXQ4 – Reliable petrol engine for demanding applications The Honda GX270UT2X SXQ4 is a compact, air-cooled 4-stroke petrol engine known for its exceptional reliability and long-lasting performance. With a displacement of 270 cm³, this engine delivers 6.2 kW (8.3 HP), making it ideal for professional use in pumps, generators and other heavy-duty applications. Brand: Honda Product number: GX270UT2X SXQ4 Original Number: GX270UT2X-SX-Q4-OH Fuel Type: Gasoline Capacity: 270 cm³ Number of cylinders: 1 Power: 6.2 kW Maximum power: 8.3 HP Rated speed: 3,850 r/min Cooling type: Air Crankshaft type: Straight Crankshaft length: 60 mm Crankshaft diameter: 25 mm Crankshaft position: Horizontal Starting system: Manual start Flywheel Type: Heavy Fuel tank capacity: 5.3 l With fuel tank: Yes With exhaust: Yes Oil Shielding: Yes Oil filter:  ...

Used Deutz D2011 L04 I, engine is starting running Brand: Deutz Model: D2011 L04 Few hours Exhaust type: Dry Power: 36.4kW Speed : 2500 Turbo: No Fuel Pump Control: Mechanical Engine cooling: Air/oil cooled Engine Serial Number:- New oil and filters Auction-ID: A1-47366-99

- tanks are empty - including piping to first coupling/valve - dimensions (without motor) approximately H120xØ75cm - To be dismantled by the buyer, on the instructions of the person in charge on site - Supply power cable including up to wall/ceiling mounting Auction-ID: A1-50974-11

- tank is empty - including conduit to first coupling, without other piping - dimensions approx. H400xØ210cm - To be dismantled by the buyer, on the instructions of the person in charge on site - Supply power cable including up to wall/ceiling mounting Auction-ID: A1-50974-9

HT25 model mini crawler excavator, equipped with 360 degree rotation fifth wheel, swing arm, joystick, auxiliary system for hammer, electronic controls, 3-cylinder Kubota D1105 water-cooled engine, with self-braking recessed track engines never used, 0 hours The color of the excavator may vary according to availability (yellow, red, other) NEVER USED Overall dimensions: 2900 x 1500 x 2500 mm Weight: 2400 kg Auction-ID: A7-50799-130

Equipped with: Diesel engine Deutz 2 cylinder diesel. HIAB hydraulic loader crane type 852-2235A, serial number 1010, built in 1980, equipped with hydraulic extension boom and swivel device, with an estimated dead weight of 2,000-2,500 kg, a working range of approximately 6-8 m and a lifting capacity of approximately 3,000-5,000 kg depending on the flight. transport dimensions of approximately 4.0 x 2.2 x 2.4 m (LxWxH), Auction-ID: A1-47394-192

Good used F4L 2011, about 1600 hours. New oil and filters Auction-ID: A1-47366-102

Deutz BF6M 1013 (Project engine) lower block should have been overhauled. 2 pallets, exact completeness unknown. Auction-ID: A1-47366-103

Weber vibratory plate with Hatz diesel engine (Used machine / non-functional) • Manufacturer: Weber • Design: Reversible vibratory plate / soil compactor • Engine manufacturer: Hatz • Engine: Hatz 1D series / Supra • Fuel: Diesel • Starting system: manual start by means of starter crank • Starter crank: missing • Design: Heavy vibratory plate with guide drawbar Equipment / Construction: • Hatz single-cylinder diesel engine • Reversible operation • Guide drawbar with handle • Closed engine guard • Solid steel base plate • Integrated stop / lifting eye • Operating hour counter / display available Condition: • Used, age-appropriate and operational condition • Clear traces of paint and wear present • Surface corrosion is present , especially on the base plate, fasteners and attachments • Starter crank is missing • No functio ...

HT 25 mini-excavator, equipped with 3-cylinder KUBOTA D722 diesel engine, self-braking recessed track engines, protective cage and reinforced frame, joystick and electric controls, equipped with extendable undercarriage, boom swing, hammer hydraulics, never used, 0 hours The color of the excavator may vary according to availability (yellow, red, other) Overall dimensions: 2700 x 1100 x 2600 mm Weight: 1650 kg Auction-ID: A7-50799-310

- tank is empty - including conduit to first coupling, without other piping - dimensions approx. H400xØ210cm - To be dismantled by the buyer, on the instructions of the person in charge on site - Supply power cable including up to wall/ceiling mounting Auction-ID: A1-50974-8

Paguro 6000 used marine generator with Lombardini engine. Possible injector defective, engine smokes slightly. Engine starts and runs and supplies power Auction-ID: A1-47366-105

Used Auction-ID: A1-50849-541

Mastervolt Whisper 6000 Generator with 2 cylinder Lombardini engine, 1500/3000 rpm. This is a trade-in item, engine starts and runs, supplies power. Auction-ID: A1-47366-104

Note: The items offered are sold by us unchecked. No functional or technical tests have been carried out. Therefore, we cannot provide any information on function, completeness or technical condition. Traces of use and defects are possible. We expressly point out that a prior inspection of the items is strongly recommended in order to get an idea of the condition and scope of the goods offered. Auction-ID: A1-51029-132

HT25 model crawler mini excavator, equipped with 360 degree rotation fifth wheel, swing arm, control joystick, auxiliary system for hammer, electronic controls, 3-cylinder Kubota D1105 water-cooled engine, with self-braking recessed track engines never used, 0 hours The color of the excavator may vary according to availability (yellow, red, other) NEVER USED Overall dimensions: 2900 x 1500 x 2500 mm Weight: 2400 kg Auction-ID: A7-50799-40

Moffett M4 20.3 Truck-mounted forklift (Used machine) • Manufacturer: Moffett Engineering Ltd. • Model: M4 20.3 • Vehicle type: Truck-mounted forklift / rough-terrain forklift • Year of construction: 09/2009 • Factory No.: J20004 • Load capacity: 2,000 kg • Load center of gravity: 600 mm • Net weight: approx. 1,740 kg • Maximum lifting height: approx. 3,000 mm • Propulsion: Diesel • Type: 3-wheel version Mast / load capacity: • Duplex/lift mast • Load capacity up to 2,000 kg with 500–600 mm load centre • Load capacity approx. 1,715 kg with 700 mm load center • Forks available • Sideshift / fork carriage according to illustrations Equipment: • Enclosed driver's cab • Work lights • Rotating beacon • Hydraulic steering • Off-road tyres • Street lighting • Towing/transporting device for truck transport Conditi ...

Good used Deutz BF4M 1012E Diesel engine, with new oil and filters. Sold due to warehouse clearance. Auction-ID: A1-47366-89

Used Ford 2722E Marine, acquired by trade-in. The engine is complete with gearbox and dashboard, it is not stuck. Auction-ID: A1-47366-108

Working geziEtesia petrol lawn mower with Kawasaki FC180V engine Brand: Etesia Product Type: Professional Gasoline Lawn Mower Motor: Kawasaki FC180V Fuel: Petrol Condition: working Features: - Kawasaki FC180V 4-stroke petrol engine - Hand starter / pull starter - Metal cutting deck - Height-adjustable cutting height - 4 wheels - Control levers on tiller - Foldable/adjustable handlebar - Fuel tank - Oil filler cap - Rear discharge / connection for grass collection - Professional robust design Notes: - Working seen - Used condition - Signs of wear and contamination present - Is offered in accordance with photos and video Auction-ID: A1-47449-60

HT 25 mini-excavator, equipped with 3-cylinder KUBOTA D722 diesel engine, self-braking recessed track engines, protective cage and reinforced frame, joystick and electric controls, equipped with extendable undercarriage, boom swing, hammer hydraulics, never used, 0 hours The color of the excavator may vary according to availability (yellow, red, other) Overall dimensions: 2700 x 1100 x 2600 mm Weight: 1650 kg Auction-ID: A7-50796-310