134,867 used machines on RESALE, but how to find them? Machine Search
Partial complete engine for Mercedes Citaro, model OM 902.934 It is a refurbished exchange engine. Repaired according to manufacturer's guidelines and according to RAL quality seals. Further information on the scope and execution can be found on our homepage buecker-essing.de Installation and installation as well as service around the engine optionally possible. Please contact us for a written offer. We also have other replacement engines, as well as AT cylinder heads, turbochargers, spare parts and other components in stock.
Semi-complete engine Mercedes Actros OM 501 LA – Euro 5 – Type 541.976/980 It is a refurbished exchange engine. Repaired according to manufacturer's guidelines and according to RAL quality seals. Further information on the scope and execution can be found on our homepage buecker-essing.de Installation and installation as well as service around the engine optionally possible. Please contact us for a written offer. We also have other replacement engines, as well as AT cylinder heads, turbochargers, spare parts and other components in stock.
Brand ZF Model Gearbox Ratio 4.697:1 Power 452 kW RPM 1800 kW/RPM 0.251 General condition New Condition Features: SAE Housing Controls Weight (kg) 632 Dimensions (cm) 80 x 120 x 130
Motor Perkins 704.30 # UA80973U857134J completely overhauled replacement engine incl.3.PTO finish without starter + alternator, flywheel. All wear parts renewed incl. Engine test run. 12 months warranty
; Mileage [km]: 8; Power [PS]: 480; Accessories: Turbo; Amount of previous owners: 1
Maximum diameter to turn on the bench 2,110 mm Maximum diameter to turn on trolley 1,600 mm Maximum distance between platforms 12,830 mm Spindle hole diameter 155 mm Cone on spindle no. 120 metric Cone on spindle (with reduction) no. 6 clamps Cone on the counterpoint (6-bit reduction) no. 120 metrics Maximum stroke of the counterpoint 400 mm DSeed from the tool support plane to the axis of the 80 mm centers Main engine power 100 HP Spindle speed from 0.9 to 90 rpm with continuous variation Longitudinal feed no. 36: 0.2 to 12.8 Transverse advances No. 36: 0.1 to 6.6 Metric fillets #26: 1 to 42 Whitwoth fillets #17: 0.5 to 11 Quick forwards Maximum permissible load on the tips 50-60 ton Refrigerant liquid system
Peak height 2,600 mm Point distance 10,000 mm Closed bench 2,000x6,000 mm To be completed with CNC
Max length 8,000 mm Maximum turning diameter above wagon 1,250 mm Max vault over guides 1,650 mm Maximum turning diameter under spindle 2,000x700 mm Displayed – two axes
IN THE RETROFITTING PHASE Height tips 900 mm Point distance 7,000 mm Turnerable diameter on the bench 1,850 mm Turnerable diameter on trolley 1,350 mm Turnerable diameter on recess 2,150 mm Bench width 1,000 mm Bar passage diameter 206 mm ASA A1 15" spindle attachment Top speed 300 RPM Diameter of the tank counterpoint 220 mm Row stroke counterpoint 450 mm Withworth threads - metrics - diametrics - module Weight allowed between tips without lunettes 15 ton Weight allowed between tips with a 20-ton bezel
Height tips 220 mm Useful length 1,000 mm 42 mm bar pass
Equipped with no. 03 guides Overhauled with: guide grinding, CN conversion, new electrical and hydraulic system, hydraulic self-centering installation, shaving conveyor; CN Fagor 8055 Numerical Control – BT Maximum turnerable diameter 1800 mm 3-grife hydraulic self-centering with a diameter of 1450 mm with tightening force 30 Ton with 30 bar clamp L max turnerable 3000 mm Spindle engine power 110 Kw Maximum rotation speed 180 rpm Fast value axles 4000 mm/min M3/M4 Spindle Rotation Inversion Possibility 4 speed ranges Hydraulic counterpoint Maximum capacity of workpiece on counterpoint 12500 Kg It is currently possible to work details of up to 3000 mm length but the extension pallet is available to be able to work details up to 8 m in length. (un revised); Machine installed and working
Maximum turnerable diameter: 1040 mm Turning diameter above the wagon: 620 mm Maximum workable length: 5200 mm Spindle power: 40 kW CNC ECS Optical line measurement system Maximum flow between tips: 10 tons Machine complete with chip evacuator, 4-position hydraulic turret, safety shelters in compliance and spindle 3-jaw hydraulic self-centering AUTOBLOCK; Various accessories available (tool case, stretchers, lunettes...) EC 2018 remarking possibility
Platò diameter: 1300 mm Used lathe in good condition, available unless sold.
peak heights: 250 mm point distance: 1500 mm bar pass: 105 mm
Main technical data: - Tip distance: 6000 mm - Tip height: 640 mm - Lathe complete with spindle, tailstock and tool turret
Code 2841 Description Centerlathe Make Graziano Model SAG 12 Serial No. SAG 12 N 4475 Year 1976 Distance between centers 800 mm Swing over bed 320 mm Swing over gap 420 mm Swing over crossslide 176 mm Spindle bore 41 mm Number of spindle speeds 8 Spindle speeds 75-2000 rpm Feeds Longitude and cross Motor power 2 and 3 kW – 380 Volts Thread cutting Metric, W.W., Modul and D.P. Accessoiries 3 chuck Condition Machine is in normal condition.
Code 2876 Description Centerlathe Make Graziano Model SAG 12 Serial No. SAG 12 N 5150 Year 1980 Distance between centers 800 mm Swing over bed 320 mm Swing over gap 420 mm Swing over crossslide 176 mm Spindle bore 41 mm Number of spindle speeds 8 Spindle speeds 75-2000 rpm Feeds Longitude and cross Motor power 2 and 3 kW – 380 Volts Thread cutting Metric, W.W., Modul and D.P. Accessoiries 3 chuck Steadies Rapid toolpost Condition Machine is in normal condition.
20197 ZF IRM 350P Ratio: 4.536:1 Power Factor 0.207 kW/rpm Brand New Features: SAE1 SAE Housing Controls Oil FIlter /Oil Cooler Weight (kg) Dimensions (cm) 230 60 x 800 x 110 Amsterdam Alexandria Marine Boekweitstraat 17 2153 GK, Nieuw Vennep The Netherlands +31(0)252514588
Brand: Caterpillar Model: 3508 DITA Power: 746 KW RPM: 1600RPM Flywheel Housing SAE 0 Engine Condition: Used Turbo Type: Dry Exhaust Systeem: Water-cooled ECU Starter Voltage: No Starter Present , Injection Type: ECU (Electronic Control Unit) weight: 5500 kg
Brand: Caterpillar Model: 3512 B DITA Power:1015KW RPM: 1600RPM Cooling Type: Heat Exchanger Flywheel Housing SAE: SAE 00 Engine Condition: Used Turbo Type: Dry , Exhaust Systeem: Water-cooled , ECU Starter Voltage: No Starter Present , Injection Type: ECU (Electronic Control Unit) , weight: 6250
BRAND: ZF MODEL: BW 461 RATIO: 5.037:1 POWER: 1100 kW RPM: 1800 RUNNING TAKE OUT WEIGHT: 1340 kg DIMENSION:100x120x130
TWIN DISC MG 527 5.17:1 800 HP/ 596 kW 1800 rpm Brand: TWIN DISC Model: MG 527 Ratio: 5.17:1 Power: 800 HP (596 kW) RPM: 1800 RPM Used Running Take Out Features Flexible Coupling Type of drive: Spider SAE Housing/ SAE 0 Controls 18 inch, rubber block drive Aluminum ring Weight kg 1500 Dimensions (cm) 120x90x100
maximum number of results exceeded
please refine your search
