gas engine deutz used for sale

power capacity: 0 kW volt: 0 V ampere: 0 A new motor with options G45 und K42 Data please see typeplate. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Please find herewith list of spares of Wartsila 32LN available for sale. Some photographs are attached for your ready reference. If you are interested in anyone, please inform us enable us to quote you in detail. 1) CYLINDER HEAD 2) PISTON 3) EXHAUST VALVES 4) INLET VALVE 5) WATER PUMP 6) INJECTION PUMP 7) HOUSING WITH BEARING and more Small Spares available

KKK Turbocharger Overhauled K44 UB19 W8286 Q6 Ausf Nr 5344 990 6001

New liner including class acceptance

Key data: 30 , 1500

Generator Motor 32 KW at 15001 rpm

CAT C13 Oil Pan Part Number: 210-1745 Price/piece: 350,-€ (discount for larger purchase quantities)

Solenoid valve, disc valve, flap valve, electromagnetic valve, solenoid valve, gas solenoid valve -Manufacturer: Kromschröder, gas solenoid valve -Type: MK 5 R3 B2891 -Pmax.: 130 mbar -Voltage: 220/240 V -Dimensions: 375/115/130 mm -Weight: 7 kg

Bow jet engine overhauled

MAN 9L32/40 complete engine 3 pieces available Each engine 4320 Kw at 720 Rpm Also able to sell crankshaft / spare parts or the cylinder block please contact: info@fin-marine

Key data: 61 , 75

Origin Engine 9.1 L: 90 kW mechanical power gas supply: natural, LNG, biogas or wood gas liquid-cooled exhaust manifolds single coil per cylinder ignition system crankcase venting motor coupled to generator Generator Linz: active power - 75 kVA turnovers - 1500 1/min

Semt Pielstick Marine Diesel PA4-185 GANZ-MAVAG-SEMT PIELSTICK Possibly sold in parts !

Rolls Royce Bergen B32:40 L6P engines for sale in our stock in Istanbul Turkey Bergen B32:40 L6P complete engine with turbo charger In our stock in Istanbul 3 pieces available year: 2002 3000 kw 750 RPM in good condition please contact : info@fin-marine.com

Motor control, controller -Manufacturer: Phoenix Contact, Mosca Motor Control -Type: EG 45 ME2213 -Number: 12x available -Price per piece -Dimensions: 75/45/H130 mm -Weight: 0.3 kg/pc.

gasoline engine, gas engine, drive engine -1 cylinder -Air-cooled -Engine power: 11 HP -Drive shaft: Ø 35 mm -Dimensions: 450/370/H430 mm -Weight: 35 kg

Output 615 HP Speed 2300 rpm Type of cooling water Number of cylinders 12 With ZF BW160 Type Gear box

Pistons 2 pieces Ø 106.5 mm Diesel engine -Piston: Ø 106.5 mm -Piston height: 112 mm -Piston pin: Ø 41.278 mm -Total price: 2 pieces -Weight: 1.4 kg/piece

Pistons 4 pieces Ø 106.5 mm Diesel engine -Piston: Ø 106.5 mm -Piston height: 112 mm -Piston pin: Ø 41.278 mm -Complete price: 4 pieces -Weight: 1.4 kg/piece

Piston 3 pieces Ø 106.5 mm diesel engine -Piston: Ø 106.5 mm -Piston height: 112 mm -Piston pin: Ø 41,278 mm -Complete price: 3 pieces -Weight: 1.4 kg/piece

Daedong D 3-110, 3-Cyl., 1127 cm³ displacement, 18 kw/24 HP/ 3000 1/min. Incl. starter, alternator, generator flange SAE 5. as well as Daedong D 4-150, 4-cyl., 1502 cm³ displacement, 24 kw/32 hp/ 3000 1/min. Incl. starter, alternator, generator flange SAE 5.

Engine A1050024 Motor for BOFA suction systems: Type: AD 500 IQ, AD 1000 IQ , AD 1500 IQ Engine A1050024 MA-201067 New original engine

Speed Control Unit, speed controller, controller, engine governor, motor controller, motor control controller -Manufacturer: Phoenix Contact, Motor control: Motor control controller -Type: ME2213 -Dimension: 130/45/H75 mm -Weight: 0.3 kg

Starter motor, diesel engine, drive motor, marine diesel engine, diesel generator -Manufacturer: Bosch, starter motor from MWM RHS 518V16 generator -Type: Bosch 0 001 510 003 -Voltage: 24V 9PS -Teeth: 11 -Dimensions: 445/150/H210 mm -Weight: 26 kg

diesel engine, propulsion engine, marine diesel, injection pump, fuel pump, fuel injection pump, diesel generator, diesel generator -Manifold: from generator MWM RHS 518V16 -Dimensions: see photos -Total dimensions: 800/210/H70 mm -Weight: 8.7 kg

Engine QSF3.8 97kW Condition - new Manufacutred by Cummins Inc. Engine serail No 76501916 Family KCEx103.8AAB Gross Rated kW - 97kW at 2500 rpm Idle RPM 950 Gross weight - 440 kg In stock 4 pcs Hakusanat: CM2350 Continental P5317106 1T2350A07192732 T1669 FS109S CB80031.12 BFCEC P5476423 S03068876501946

Hello all, We have in our stock in Istanbul Turkey 3 Wartsila W32 Cylinder head covers in almost brand new condition (slightly used) Standart exhaust seat bores, No cracks or wielding Water pressure tested With reports available Please contact us at info@fin-marine.com Regards

motor pump Scania Ds11 6-cylinder in-line engine

ELECTRIC BOARDS GIFAS 63 Amp. 80 Amps And 32 Amp. (90% are 63 Amp.) All in compliance with C.E. In addition, about 20 pieces of West Electric 40 Amp panels, recent, without C.E.

Dear's Sale, used 2 diesel engine Ulstein Bergen BVM-12 Brgds Hakan KUSCU +905323642509

Dear's Sale, used 4 diesel engine WARTSILA 12 ZAV 40 S Brgds Hakan KUSCU +905323642509

Dear's Sale, used 2 complete engine WARTSILA 6R32D Brgds Hakan KUSCU +905323642509

a used DETROIT diesel mototor komplet model DD 50 s/n 4 R005301. Price 4.000,= ex Leende

Diesel engine brand Caterpillar Type 3306T, Location: Brown Lenox K114 crusher, year of construction 1992, Accessories: Starter, Generator, Turbo, Engine is serviced and ready for use

Hello all We have 8 X Wartsila 12V32 LN engines available Year of build is 2007 In very good condition Also all major parts are available such as: Pistons, Liners, Cylinder heads, Con rods, Crank shaft Please contact us at : info@fin-marine for more info

MAN 16V32/40 Crankshaft 2 Pieces available in our stock in Istanbul Turkey Crankshaft is in good condition STD size Tests are done for: Measurement Hardness Crack Bending For more information please contact with us: info@fin-marine

Tip height: 250 mm Center width: 1500 mm Circulation Ø: over bed 500 mm Spindle bore: 63 mm Spindle holder: Size 8 Mounting cone tailstock: 5 MK Spindle speeds: 170 - 2240 rpm Feeds: longitudinal/flat 0.014-1/0.0063-0.45 mm/U Thread pitches: 0.1 - 112 mm electrical connection: 380 V, 7.5 kW Space requirement: 2300 x 1000 x 1400 mm Weight: 2360 kg

Speed control unit, speed controller, controller, motor controller, motor control, motor controller -Manufacturer: Oriental Motors, Motor control unit Motor controller -Type: BMUD 120-C2 -Quantity: 1x controller available -Dimensions: 135/60/H100 mm -Weight: 0.4 kg

We have available in our stock 2 units Wartsila Nohab WN 12V25 complete diesel engines 2760 Kw at 900 RPM Please contact us at: infofin-marine.com

Piston 2 pieces Ø 106.5 mm diesel engine -Piston: Ø 106.5 mm -Piston height: 112 mm -Piston pin: Ø 41,278 mm -Complete price: 2 pieces -Weight: 1.4 kg/piece

Figure shows MIOTAL® TC 180 x 1000 Center width: 750 mm Center height: 165 mm Orbit diameter over bed: Ø 330 mm Bed width: 190 mm Travel cross slide: 160 mm Travel upper carriage: 90 mm Spindle connection: DIN 55029 (Camlock) D 1 - 4 Spindle bore: Ø 40 mm chuck diameter: Ø 200 mm Spindle speed, infinitely variable: 30 - 2000 rpm Mechanical counters: 3 Motor power: 2.2 kW Longitudinal feeds Z: (40) 0.044 - 1.96 mm/rev Feed rates X: (40) 0.022 - 0.98 mm/rev Thread Metric: (32) 0.4 - 7.0 mm Thread inch: (32) 4 - 56 gg/inch Thread module: (32) 0.4 - 7,0 Diametrical thread: (32) 7.5 - 112 Quill diameter tailstock: Ø 40 mm Inner cone of the quill tailstock: MK 3 Quill stroke: 100 mm Lateral adjustment: ± 10 mm Weight, approx.: 650 kg Characteristics: - Acceptance protocol according to DIN - Precise, hardened and ground guides - Robust headstock with circula ...

Center height: 205 mm Orbit diameter over bed: 410 mm Center width: 1000 mm Bed width: 260 mm Spindle nose: DIN 55029 (Camlock) 9, size 6 Travel cross slide: 220 mm Travel upper slide: 125 mm Spindle bore: 52.5 mm Spindle speeds: 20 - 3000 min-1 Speed control: Infinitely variable Mechanical counters: 2 Motor power: 3.75 kW Coolant pump: 0.13 kW Longitudinal feeds Z: 0.05 - 1.7 mm/rev Face feeds X: 0.025 - 0.85 mm/rev Whitworth Thread: (45) 2 - 72 TPI Metric threads: (39) 0.2 - 14.0 mm Diametric thread: (21) 8 - 44 DP Module thread: (18) 0.3 - 3.5 MP Quill diameter: 52 mm Inner cone quilt: MK 4 Quill stroke: 150 mm Dimensions: 2270 x 1120 x 1900 mm Weight, approx.: 1500 kg Characteristics: - Tool mesh accuracy according to DIN 8605 - Infinitely variable speed control (2 countershafts) - Finely balanced main spindle - Stable machine bed with hardened and gro ...

Center width: 1000 mm Center height: 178 mm Orbit diameter over bed: Ø 356 mm Bed width: 190 mm Travel cross slide: 160 mm Travel upper carriage: 90 mm Spindle connection: DIN 55029 (Camlock) D 1 - 4 Spindle bore: Ø 40 mm chuck diameter: Ø 200 mm Spindle speed, infinitely variable: 30 - 2000 rpm Mechanical counters: 3 Motor power: 2.2 kW Longitudinal feeds Z: (40) 0.044 - 1.96 mm/rev Feed rates X: (40) 0.022 - 0.98 mm/rev Thread Metric: (32) 0.4 - 7.0 mm Thread inch: (32) 4 - 56 gg/inch Thread module: (32) 0.4 - 7,0  Diametrical thread: (32) 7.5 - 112  Quill diameter tailstock: Ø 40 mm Inner cone of the quill tailstock: MK 3 Quill stroke: 100 mm Lateral adjustment: ± 10 mm Weight, approx.: 750 kg Characteristics: - Acceptance protocol according to DIN - Precise, hardened and ground guides - Robust headstock with circulating oil lubrication, precision-be ...

Hello all We have in our stock in Istanbul turkey 16 Pieces brand new Mak M25C cylinder heads In brand new condition. We also have pistons, cylinder liners, connecting rods, Crankshafts for 8M25 engine and more spares available for Mak 8M25 Please contact us at info@fin-marine

Auction-ID: A7-45768-39

Auction-ID: A1-45803-38

Auction-ID: A1-45803-37

Sulzer 8ZAL40 S Crankshaft Available in our stock in Turkey Came out of 2015 Sulzer ZAL40S engine Std sized main journals and crank pins Without any cracks or welding Please contact info@fin-marine

Center height: 315 mm Center width: 1000 mm Circulating Ø: 630 mm Spindle bore: 74 mm Spindle holder: Size 8 Pick-up cone tailstock: 5 MK Spindle speeds: 7 - 710 rpm Feeds: longitudinal/flat 0.063-4/0.030-2 mm/rev Thread pitches: 1 - 14 mm electrical connection: 380 V kW Space requirement: 2750 x 1250 x 1380 mm Weight: approx. 4200 kg

Unused Auction-ID: A1-42014-260

Auction-ID: A1-40135-308

Main technical data: Center height: 560 mm Distance between centers: 5000 mm Bar passage: 105 mm The lathe is in good condition, being cleaned and visible at Ns. site.