gas engine deutz used for sale

MIG/MAG hose package, MIG/MAG welding torch -MIG/MAG hose package: Gas-cooled -Length: 3.0 m -Transport dimensions: 460/450/H60 mm -Weight: 3,2 kg

MIG/MAG hose assembly, MIG/MAG welding torch -MIG/MAG hose assembly: Gas-cooled -Length: 3.9 m -Dimensions: 450/450/H90 mm -Weight: 3.2 kg

MIG/MAG hose package, MIG/MAG welding torch -MIG/MAG hose package: Gas-cooled -Length: 3.0 m -Transport dimensions: 450/400/H50 mm -Weight: 2.0 kg

MIG/MAG hose package, MIG/MAG welding torch -MIG/MAG hose package: Gas-cooled -Length: 3.5 m -Transport dimensions: 660/450/H80 mm -Weight: 3.6 kg

MIG/MAG hose package, MIG/MAG welding torch -MIG/MAG hose package: Gas-cooled -Length: 3.3 m -Transport dimensions: 560/460/H90 mm -Weight: 4.0 kg

Wire feed case for inert gas welding machine, inert gas device, wire feed case, wire feed device -Manufacturer: Oerlikon wire feeder, gas-cooled -Type: unfortunately without type designation -Dimensions: 640/280/H400 mm -Total weight: 19.6 kg

MIG/MAG hose package, MIG/MAG welding torch -MIG/MAG hose package: Gas-cooled -Length: 4.0 m -Welding gun: Type DIX MS 2 -Transport dimensions: 500/380/H80 mm -Weight: 4.5 kg

MIG/MAG hose assembly, MIG/MAG welding torch -MIG/MAG hose assembly: Gas-cooled -Length: 4.7 m -Type: DIX MS 330-4 SA -Transport dimensions: 400/480/H100 mm -Weight: 4.2 kg

MIG/MAG hose assembly, MIG/MAG welding torch -MIG/MAG hose assembly: Gas-cooled -Length: 3.5 m -Transport dimensions: 430/360/H85 mm -Weight: 3.2 kg

TIG hose assembly, welding torch, hand welding torch, TIG torch -TIG hose package: Gas-cooled -Length: 7.2 m -Connector: 4-pin -Transport dimensions: 400/400/H100 mm -Weight: 3.5 kg

TIG hose assembly, welding torch, hand welding torch, TIG torch -TIG hose package: Gas-cooled -Length: 4 m -Connector: 3-pin -Quantity: 1x hose package available -Price: per piece -Dimensions: 340/340/H70 mm -Weight: 1.8 kg/pc.

TIG hose assembly, welding torch, hand welding torch, TIG torch -TIG hose package: Gas-cooled -Length: 8.2 m -Connector: 2-pin -Transport dimensions: 380/380/H90 mm -Weight: 3.6 kg

TIG hose assembly, welding torch, hand welding torch, TIG torch -TIG hose package: Gas-cooled -Length: 4 m -Connector: 4-pin -Transport dimensions: 320/320/H80 mm -Weight: 2.3 kg

TIG hose assembly, welding torch, hand welding torch, TIG torch -TIG hose package: Gas-cooled -Length: 3.8 m -Connector: 2-pin -Transport dimensions: 300/300/H90 mm -Weight: 1.8 kg

TIG hose assembly, welding torch, hand welding torch, TIG torch -TIG hose package: Gas-cooled -Length: 8.3 m -Connector: 4-pin -Transport dimensions: 340/340/H120 mm -Weight: 3.6 kg

TIG hose assembly, welding torch, hand welding torch, TIG torch -TIG hose package: Gas-cooled -Length: 7.7 m -Connector: 4-pin -Transport dimensions: 400/400/H100 mm -Weight: 4.7 kg

TIG hose assembly, welding torch, hand welding torch, TIG torch -TIG hose package: Gas-cooled -Length: 4 m -Connector: 5-pin -Transport dimensions: 360/340/H80 mm -Weight: 1.7 kg

Collet sleeves, collet, tool holder, tool holder, milling chuck, milling tool, collets -Collet chucks: Ø 6-18 mm -Square collet chucks: 6-15 mm -Outer diameter: Ø 30 mm -Cone: Ø 40 mm -Cone length: 17 mm -Weight: 6 kg

We offer for sale a Cummins gas CHP 2000 KW. Specifications Engine: Cummins Type: D67 Power: 2000 KW Year of construction: 2007 Revolution: 1500 1/min Generator: Stamford Power: 2650 KVA Voltage: 380 V Frequency: 50 Hz Operating hours: 59,000 h

GE Oil & Gas Nuovo Pignone Steam Turbine – Model SC1-10 For sale: Industrial Steam Turbine manufactured by GE Oil & Gas (Nuovo Pignone). Model SC1-10 (Equipment Tag: 661-KT-4101). This equipment is decommissioned and ready for transport. Ideal for power generation or as a mechanical drive for heavy-duty industrial compressors in refining, petrochemical, or power plants. Key Specifications: Manufacturer: GE Oil & Gas / Nuovo Pignone Equipment Type: Steam Turbine Model: SC1-10 Equipment Tag: 661-KT-4101 Condition: Used / Decommissioned. Location: Spain Status: Ready for immediate dismantling and transport. Please contact us for more information, technical datasheets, performance curves, or to arrange a site inspection.

GE Nuovo Pignone Backpressure Steam Turbine – Model SNC1-2 For sale: Industrial Backpressure Steam Turbine manufactured by GE Oil & Gas (Nuovo Pignone). Model SNC1-2 (Equipment Tag: 661-KT-3301). The equipment is decommissioned and prepared for safe transport. Ideal for mechanical drive applications or cogeneration in industrial plants, refineries, and petrochemical facilities. Key Specifications: Manufacturer: GE Oil & Gas / Nuovo Pignone Equipment Type: Backpressure Steam Turbine Model: SNC1-2 Equipment Tag: 661-KT-3301 Condition: Used / Decommissioned. Location: Spain Status: Ready for immediate dismantling and transport. Please contact us for more information, technical datasheets, performance curves, or to arrange a site inspection.

A professional gastro tilting frying pan (tilting roaster) made of robust stainless steel is sold. The device is in good, used condition and is ideal for gastronomy, commercial kitchens, canteens, butchers or event catering. Due to the versatile applications, large quantities of food can be easily fried, boiled, steamed or stewed. Precise manual tilting: Smooth-running, robust handwheel on the front for safe pouring of liquids and easy emptying. Integrated water inlet: Practical four-star handle/cross handle in the middle for direct water filling of the crucible. Stepless temperature control: Thermostat rotary control for exact heat settings. Dimensions: Outside: W x D x H 800 x 900 x 930 mm Inside: W x D x H 700 x 600 x 190 mm Crucible 140 mm "Everything from a single source: We will be happy to offer you suitable bank financing for your project." komplett-konzept.leasingo.de M ...

Key data: 2418 KW, 10500 V

MWM 4.3 MW Gas Generator Set – High-Efficiency Power Generation Solution Reliable 4.3 MW Electrical Output for Industrial Applications Power your operations with the advanced MWM TCG 2032 V16 Gas Engine Generator Set, engineered for maximum efficiency, reliability, and long-term performance. Key Technical Specifications Electrical Output: 4,300 kW (4.3 MW) Engine Model: MWM TCG 2032 V16 Configuration: V16 Gas Engine Generator Voltage: 10,500 V Frequency: 50 Hz Speed: 1,000 rpm Displacement: 272 liters Compression Ratio: 12.0:1 Electrical Efficiency: 42.7% Thermal Efficiency: 45.2% Total CHP Efficiency: Up to 87.9% NOx Emissions: 250 mg/Nm³ 5% O₂ Dry Weight (Genset): 52,900 kg Exhaust Heat Recovery: Up to 2,418 kW Fuel Consumption: 10,066 kW fuel input at full load Outstanding Combined Heat & Power Performance The MWM 4.3 MW genset delivers exceptional energ ...

; Gross weight [kg]: 17500; Engine: Caterpillar G3520C; Accessories: Control Panel, Complete including roof radiatior, gas piping etcetera.

; Gross weight [kg]: 17500; Engine: Caterpillar G3520C; Accessories: Control Panel, Complete including roof radiatior, gas piping etcetera.

for cap type PCO 28-1881 with Siemens S7 PLC Capacity: approx. 40,000 caps/h with sorting unit with cap control incl. approx. 18 m feeder with 2 blowing stations

; Gross weight [kg]: 12500; Engine: G3516A

Pasteurizer PA500-RWT-Gas Used Subject to prior sale!

Voran Pasteurizer 500l/h Gas Used Subject to prior sale!

Transformer Gass DST 21 Type BV 33819 400 V / 276 V

Powder curing furnace 2,000 x 1,900 x 2,000 mm 1 Inner dimension length 2,000 mm 2 Inner dimensions width 1,900 mm 3 Internal dimensions height 2,000 mm 4 Substructure 1 set of steel profile 5 walls 1 set of galvanized sheets 1mm on both sides, RAL on the outside 6 Insulation walls, ceiling 1 set of rock wool 150mm 75Kg/m² 7 Bottom furnace gets 2 entry rails for tray wagons 8 Temperature 220°C 9 fans 1 pc. 5,700 m³/h 10 electric motors 1 pc 2.2 kW , 1450 rpm, 3 F, 50 Hz 11 Thermal output 33 kW = 28,380 kcal/hour 12 hinged doors on one side 2 pcs insulated with rock wool 100mm 75Kg/m² Heating Indirectly via Thermoblock 13 Thermoblock 1 set of stainless steel INOX with heat-resistant fans and heat-resistant bearings, thermoblock has overheating protection 14 burners 1 pc stove is operated with gas burner 15 Exhaust air 1 pc device for exhaust air pipe, manual flap ...

Powder curing furnace 3,500 x 1,900 x 2,000 mm gas operation 1 Inner dimension length 3,500 mm 2 Inner dimensions width 1,900 mm 3 Internal dimensions height 2,000 mm 4 Substructure 1 set of steel profile 5 walls 1 set of galvanized sheets 1mm on both sides, RAL on the outside 6 Insulation walls, ceiling 1 set of rock wool 150mm 75Kg/m² 7 Bottom furnace gets 2 entry rails for tray wagons 8 Temperature 220°C 9 fans 1 pc. 7,500 m³/h 10 electric motors 1 pc 3 kW , 1450 rpm, 3 F, 50 Hz 11 Thermal output 58 kW = 49,880 kcal/hour 12 hinged doors on one side 2 pcs insulated with rock wool 150mm 75Kg/m² Heating Indirectly via Thermoblock 13 Thermoblock 1 set of stainless steel INOX with heat-resistant fans and heat-resistant bearings, thermoblock has overheating protection 14 burners 1 pc. stove is heated by gas burner. 15 Exhaust air 1 pc device for exhaust air pipe, m ...

Oven, doors single-sided, gas Dimensions: 4,500 x 1,700 x 2,000 [mm] (alternatively width 1900mm instead of 1700mm) Insulation: 150 mm (mineral wool 75 kg/m³) Temperature: max. 220°C Recirculating air: Q = 12000 m³/h P = 2 x 2.2 kW Heat output: 69 kW Auxiliary heating: Gas indirectly via thermoblock

Oven, doors single-sided, electric Dimensions: 3,000 x 1,700 x 2,000 [mm] (alternatively width 1900mm instead of 1700mm) Insulation: 150 mm (mineral wool 75 kg/m³) Temperature: max. 220°C Circulating air: Q = 7500 m³/h P = 3 kW Heat output: 46 kW Auxiliary heating: electrically indirect via thermoblock

We currently offer: CHP CAT Gas V16 Type: G3516 SITA Power: 1278 KVA/ 1033 KW Year of construction 1998 Hz 50 Hours: 0 After the overhaul in 2014, the generator set no longer ran Accessories: control cabinet, radiator, exhaust, complete heat exchanger Complete CHP plant Documents are included You can find more machines on our website. If you have any further questions, please feel free to contact us. Adel e.K. Commercial Vehicles-Construction Machines Car Recycling Machine Dismantling Gottlieb-Daimler Str. 26 D-74831 Gundelsheim Phone: 0049 1796710242

Engine Brand: CATERPILLAR, Conditie: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Yellow , Working Hours: 123 Hour(s), Engine Condition: Used , Turbo Type: Watercooled , Exhaust System: Watercooled , ECU Present?: No , Starter Voltage: 24 Volt , Rated Power: 202 Kw, Rated Speed: 1800 Rpm, Injection Type: Mechanical Fuelpump , Generator KVA: 252 , Generator Hz: 60 , Generator Volts: 480 , Generator Amps: 315 , Generator Fases: 3 Fases , , https://www.hamofa.com/stock/generators/used-caterpillar-g3406-generat or-202-kva-gas/22424, , = More information =, , Empty weight: 7.500 kg, Type number: CATERPILLAR G3406 GENERATOR 202

2x GE Frame 6B gas turbines 50Hz # Technical Summary Equipment Details - Gas Turbines: Two GE MS 6001 B gas turbines paired with AEG generators (Type S7102/2). - Operation History: - Commissioning: 1981 - Gas-fired Operation: Until 2005, primarily for base load (~7000 hours/year). - Operational Hours in Combined Cycle: - GT21: ~167,000 hours, ~1130 starts - GT22: ~159,000 hours, ~1180 starts - Retrofitted: In 1996 with water injection for NOx reduction. - Conversion: In 2007 to peak load operation using heating oil (HEL) with new steel chimneys and upgraded control systems to ABB Procontrol 14. - Operational Hours in Peak Load: - GT21: ~130 hours, ~177 starts - GT22: ~150 hours, ~180 starts - Last Network Operation: 2015 - Last Oil Service: - GT21: October 2015 - GT22: September 2016 - Last Borescope Inspection: December 2016 - Defect: Heating oil transfer line issu ...

Van Rietschoten & Houwens 430-301E Exhaust Gas Averager

We are currently offering for sale an almost new 50 kW CHP plant from Tuxhorn. Specifications: - Model: E50SW (Natural Gas Version) - Year of Manufacture : 2022 - Commissioning Date: February 2023 - Operating Hours (BH): 45 - Number of Starts: 59 Special Features: - Equipped with a second exhaust gas SD, reducing exhaust noise to as low as 35 dB(A) for quieter operation. Condition: - Excellent: The unit is in like-new condition with minimal usage. Applications: - Ideal for industrial or commercial operations requiring reliable and efficient combined heat and power. Find more here - .ucymachines/ Contact us at - sales@ucymachines

pressure: 105 t chamfer lenght: 3100 mm distance between columns: 2600 mm table width: 100 mm table height: 750 mm Control: DELEM DA 65 dayligth: 200 mm working feed: 0 - 10 mm/sec return speed: 0-100 mm/sec rapid traverse - up: max. 100 mm/sec voltage: 380 V / 50 Hz total power requirement: 11 kW weight of the machine ca.: 7,5 t dimensions of the machine ca.: 4 x 2,2 x 2,8 m Equipment: • CNC-control DELEM DA65 graphic video • manual back-off turning • upper and lower tool • 2 manual control / foot switch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

1. Qty. 1 Second-hand slab gas fired pit type furnace Manufacturer: Tehnika Set Type: Gas heated (2 Zones) Built: 2001 Stopped: 2019 Power: 110kW Number of heating units: 8 Dim.: 2622 5084 x 6294 mm – H x W x L Inner dimension per zone: LxWxH – 380026001635 mm Load weight max. / 2 zones: 42.000 kg Max. Slab number per zone: 5 Slab length: 3000 mm Voltage supply: 380 V, 50 Hz Compressed air: 5 bar Max. Temp.: 630 °C

Gassner bolt feeder with pneumatic lifting station and blower. Filter system for air transport with 8m pipeline

Conveyor belt, trough conveyor belt, trough conveyor GASUS type DG 300-5/2,75Belt conveyor, conveyor belt, belt conveyorFabrig Nr: D-7321915 Year of construction 1996Effective length: 2.75 metersBelt width: 230/300 mmDeflection pulley diameter: 210 / 230 mm (rubberized drive roller)Deflection pulley width: 400 mmBelt speed: approx. 15 meters/min. Motor power: 0.75 kWNerg connection: 400 volts, 50 Hz - Drive via SEW geared motor- Inlet hopper 550 x 430 mm- Metal idler rollers with maintenance-free ball bearings- Strip tension via threaded spindles

Conveyor belt, trough conveyor belt, trough conveyor presumably GASUS type FB 400 x 5500Belt conveyor, conveyor belt, belt conveyor Fabrig Nr: F-02071168 Year of construction 1996Working length: 5.5 metersBelt width: 400 mmDeflection pulley diameter: 225 mmDeflection pulley width: 450 mmBelt speed: approx. 30 meters/min. Motor power: 1.5 kWNerg connection: 400 volts, 50 Hz - Drive via tubular motor- Inlet hopper 600 x 400 mm- The support stations are 2-part troughed- Metal support rollers with maintenance-free ball bearings-

Height=0.42 m, Overall length= 0.52 m, Overall width= 0.44 m, Net weight= 51 kg,

hydraulic track marker, tramline control, drag coulter with trailing harrow, filling stairs, 12 cm row spacing / 34 coulters, with Unia Ares 400 short combination: 2 row height-adjustable tines, 1 cross kill roller, fifth wheel coupling system Weiste, Working width: 400, Year of construction: 1