We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
121,148 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
gasket kit damper / KPL XOMOX CRANE 080/16 ISO - 00 for high-performance butterfly valve 800ISO Nominal diameter: DN 80 pressure rating: PN 16 seat material: PTFE shaft seal: PTFE New ! Dimensions (packaging): 120 x 120 x 20 mm
used
gasket kit damper / KPL XOMOX CRANE 100/16 ISO - 81 for high-performance butterfly valve 800ISO Nominal diameter: DN 100 pressure rating: PN 16 seat material: Firesafe shaft seal: graphite New ! Dimensions (packaging): 160 x 145 x 20 mm
used
gasket kit damper / KPL XOMOX CRANE 150/16 ISO - 00 for high-performance butterfly valve 800ISO Nominal diameter: DN 150 pressure rating: PN 16 seat material: PTFE shaft seal: PTFE New ! dimensions (packaging): 200 x 200 x 20 mm
used
Complete MAN E3262 LE202 Natural Gas container set Make and Model: MAN E3262 LE202 Fuel: Natural Gas/Biogas Year: 2020 Man Block / 2016 Container and ancillaries Hours: 0 Capacity kW: 530 HZ: 50 Voltage:400 Scope of supply: Complete container generating set including - Engine, Alternator, Control panel (ComAp), Container, Exhaust gas heat exchanger, Gas Blower, Radiator and Gas line.
used
serial number: 0493373 ampere: 420 A water cooling unit: kW total power requirement: kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
For sale is a Stamford PE 734 F2 generator with serial number A07E797662. This generator was coupled to a Jenbacher 612 engine with the design number D851. The generator delivers an output of 2080 kVA at a frequency of 50 Hz and a voltage of 400/231 V. It was manufactured in 2007 and has since clocked up 30,000 hours of operation. Please note that the 30,000-hour service has not yet been performed. Please do not hesitate to contact us for more information or to arrange a viewing.
used
We are pleased to offer for sale a Stamford HVSI 804 S2 generator bearing serial number 0855537/01. This model was originally paired with a Jenbacher 616 engine with the design number G311. The generator is characterized by its high power of 2515 kVA, which is generated at an output voltage of 11,000 V. This model has already completed 64,000 hours of operation. An important aspect to keep in mind is that the bearings of this generator have been changed every 20,000 hours of operation. The price of this generator is 12,000 euros. For more information or to arrange a viewing, please do not hesitate to contact us.
used
For sale is a Stamford LVSI 804 W2 generator, which bears the serial number 0854702/01. This model was originally paired with a Jenbacher 616 engine with the design number B503. The generator has a power of 3555 kVA, which is generated at an output voltage of 690 V. The price of this generator is 15,000 euros. For more information or to arrange a viewing, please do not hesitate to contact us.
used
For sale is a Stamford LVSI 804 S2 generator with serial number 0853928/01. This model was originally paired with a Jenbacher 616 engine with the design number B783. The generator delivers an output of 2790 kVA at an output voltage of 400 V. It has already completed 40,000 operating hours. We would also have the associated engine in stock. The price of this generator is 16,500 euros. For more information or to arrange a viewing, please do not hesitate to contact us.
used
For sale is a Stamford LVSI 804 W2 generator, with the serial number 0854818/01. This model was originally paired with a Jenbacher 616 engine with the design number E844. The generator delivers an impressive output of 3555 kVA at an output voltage of 690 V. This model, which was manufactured in 2008, has only completed 15,000 operating hours. The price of this generator is 30,000 euros. For more information or to arrange a viewing, please do not hesitate to contact us.
used
For sale is a Stamford LVSI 804 W2 generator with the serial number 0854896/01. This generator was coupled to a Jenbacher 616 engine with the design number E844. The generator delivers an output of 3555 kVA at an output voltage of 690 V. It was manufactured in 2008 and has since clocked up 15,000 hours of operation. Please note that this generator has been overhauled and has no operating hours since the overhaul. The price of this powerful generator is 30,000 euros. Please do not hesitate to contact us for more information or to arrange a viewing.
used
For sale is a LEROY-SOMER LSA L95/4P generator with the serial number 607788/1. This generator was coupled with a Jenbacher 620 engine with the design number U320. The generator delivers an output of 2530 kVA at an output voltage of 400 V. It was manufactured in 2016 and has only 500 hours of operation since then. The price of this powerful and hardly used generator is 30,000 euros. Please do not hesitate to contact us for more information or to arrange a viewing.
used
For sale is a Marelli MJB 500 MB4 B24 generator with the serial number MT28877. This generator was coupled with an MWM TCG2020V16 motor. The generator delivers an output of 1248 kVA at an output voltage of 400 V. It was manufactured in 2007. The price of this powerful generator is 6,000 euros. Please do not hesitate to contact us for more information or to arrange a viewing.
used
For sale is a LEROY-SOMER LSA 54 XL 95-4P generator with serial number 169463-1. This generator was coupled to a Jenbacher 620 engine with the design number B056. The generator delivers an output of 3391 kVA at an output voltage of 10,500 V. It was manufactured in 2003. The price of this powerful and unused generator is 20,000 euros. Please do not hesitate to contact us for more information or to arrange a viewing.
used
For sale is a Stamford HCI 734 F2 generator with serial number 96404594. This generator was coupled to a Jenbacher 320 engine with the design number 5727. The generator delivers an output of 1460 kVA at an output voltage of 400/231 V. It was manufactured in 1996. An important aspect to keep in mind is that a Megger test has been done on this generator. Please do not hesitate to contact us for more information or to arrange a viewing.
used
For sale is a Stamford HCI 734 F2 generator with serial number 96415300. This generator was coupled to a Jenbacher 320 engine with the design number 5727. The generator delivers an output of 1460 kVA at an output voltage of 400/231 V. It was manufactured in 1996. An important aspect to keep in mind is that a Megger test has been done on this generator. Please do not hesitate to contact us for more information or to arrange a viewing.
used
For sale is a Stamford HCI 734 FCG generator with the serial number A03C027807. This generator was coupled to a Jenbacher 320 engine with the design number B212. The generator delivers an output of 1460 kVA at an output voltage of 400/231 V. It was manufactured in 2003. An important aspect to keep in mind is that a Megger test has been done on this generator. Please do not hesitate to contact us for more information or to arrange a viewing.
used
For sale is a Stamford LVSI 804 S2 generator with serial number 0853928/01. This generator was coupled to a Jenbacher 612 engine with the design number D965. The generator delivers an output of 2700 kVA at an output voltage of 400 V. It was manufactured in 2007 and has since clocked up 64,000 hours of operation. Please do not hesitate to contact us for more information or to arrange a viewing.
For sale is a LEROY-SOMER 54 XL10/4P generator with serial number 600428-6. This generator was coupled with a Jenbacher 620 engine with the design number B321. The generator provides an output voltage of 11,000 V. It was manufactured in 2003 and has since clocked up 82,346 hours. Please do not hesitate to contact us for more information or to arrange a viewing.
used
weight max. in kg: 6000 kg fork length: 1900 mm : 89% serial number: GEF 2240 height of stroke: 3300 mm weight of the machine ca.: 9650 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Key data: 635 , 400
Jenbacher 312 Complete Biogas Unit for Sale. Condition: New from cancelled project. Make and Model: JENBACHER 312 Fuel: Biogas Year: 2023 Hours: 0 Capacity: 635kW HZ: 50 Voltage: 400 V Scope of supply: Complete generator set including Engine, Alternator, Control panel (DIA.NE XT4), Base frame, Gas line . Price: Please Apply
used
Jenbacher 320 Natural Gas Container Generator for sale. Make: Jenbacher Model: JGS320 GS Fuel: Natural Gas Year: 2008 Hours: 3,000 from new Capacity: 1,063 kW V: 400 HZ: 50 Scope of supply: Engine, alternator, base frame, Control panel, synchronisation panel, circuit breaker, gas line and radiator. The generator has a one year warranty. Price: Please Apply
used
3 x J320 Complete Containerised Natural Gas Gensets. Generating Set: J320 GS Year: 2023 Hours: 0 Capacity: 1,067 kW Volts: 400 HZ: 50 Scope of Supply: Complete CHP with Exhaust Gas Heat Exchanger and Chimney. Price: €600,000 each
used
Wartsila 3.9 MW/50Hz Gas Generating Set 12V34SG with CHP Auxiliaries This power plant was built by Wartsila in end of year 2010 and it was commissioned in 2011 as a turn-key project with heat recovery system for 10 bar steam production. Fuel used in this plant was normal natural gas fed from a local pipeline. The plant was operated till 2021 having total operating hours 43’767 till shutting down. Complete plant with step up transformer, lube oil system, control panels, and synchronizer panel, USP systems, operating monitors, MCC, start system and air compressors, HRCS for 10 bar steam, exhaust system, 6 kV Vacuum breaker with synchronisation, manuals and drawings. Plant is still installed, and electric power is still connected to all devices. Wartsila Service has made all scheduled services for this engine, last 40’000-hour service just 3000-hour prior operation closing in 2021. ...
used
GE Model : LM6000PA Power Output : 42 MWe ISO condition Voltage : 11KV Frequency : 50Hz
used
Achievement: 260A at 60% 100A at 100% Equipped with: - Separate feed box - Air-cooled burners -Protective Country of origin: Netherlands Machine LxWxH: 120 x 45 x 105 cm
used
Heater, burner, gas burner, gas forced burner, forced air heater, gas condensing boiler -Gas condensing boiler: without the gas burner -Manufacturer: Viessmann, gas condensing boiler Vitocrossal 300 type CR37 -Rated heat output: 720 kW -technical Data: see photos of nameplates -Dimensions: 3360/1165/H1880 mm -Weight: 1500kg
used
Jenbacher gas generator ( UNUSED ) , Model : J620GS-F75 Power Output : 3431 KWm / 4767 KVA Voltage : 10500V Frequency : 50 Hz Qty : 8 sets Unused gas generator, only installed and tested.
used
Approx. Onsite Dimension. (l x w x h): 600 x 600 x 2,000 mm, weight approx.: 300 kg
used
This industrial plant was built in 2007 as a pilot project and is only used temporarily. The complete package includes numerous pumps, pneumatic and manual gate valves of various sizes, as well as ball check valves, flow meters as well as the entire pipeline construction and a control cabinet. Preferably, this system is sold as a package including self-dismantling. Details on request.
used
Jenbacher J612 Gas Generator Natural Gas Engine Generator. This unit is on perfect condition. The scope of Supply is only the genset. Working hours 35,000 | Brand Engine jenbacher | Fuel Natural Gas | Power 1824kW | YOM:2008
used
From insolvency: ESS Synmag 4000 Year of construction 2007 with feed case DVK 5000 with 5meter intermediate package 4 Roller drive Water cooling 2/4 stroke Welding range 40-400Ampere Duty cycle at 100% 240Ampere at 60% 300Ampere with 4meter burner, ground cable --without pressure reducer--
used
Migatronic Flex MPS 330S Year of construction 2003 330 Amps 380 volts Pulse Synergistic 2/4 time 4 rollers drive suitable for aluminium, stainless steel and steel gas-cooled --without gas cylinder-- --Sales on behalf of customers--
used
From operating resolution: MIgatronic PI 250 DC Year of construction 2014 Pulse function HF Ignition Water cooling without function Welding Range: 5-250Amp 250Amps at 30% ED 180A at 60% 150A at 100% 220 volts with 8meter burner (sheathing partially damaged), ground cable and pressure reducer Dimensions in mm approx. 1100x630x720 --Very neat device-
used
From operating resolution: ESS Squarearc 356 C Year of construction 2011 AC/DC Welding range 5-350 amps Pulse function HF Ignition Water cooling 350Amps at 60% ED complete, with 6meter burner, ground cable and pressure reducer Dimensions in mm approx. 980x450x930 --Very neat device-
used
From the stock of authorities: Pulse system little used Elmatech Hybrid 4002 Year of construction 2005 Welding capacity 400Ampere at 60% ED 320Amps at 100% Water cooling 4-Roll Wire Feeder Wire feeder case DV 39 with 5meter intermediate hose package 4meter burner with regulator Wire rolls 1.0-1.2mm + rolls for aluminum wire Dimensions in mm without case 1000x450x930 with operating instructions, pressure reducer and ground cable
used
From operating resolution: Selco Genesis 352 GSM DC Device No.007410000118 with water cooling Welding range 6-350 amps 350Amps at 60%ED 270Amps at 100% ED 380 volts with 8meter burner AQ 18F with flexible head and ground cable Adjustable pulse function RF Ignition 2/4 stroke
used
From operating resolution: Pulse welding system Cebora EVO Speed Star 380 TC Specifications: Control Sound Digibox MIG P4 Welding range 10-380 amps 310Amps at 100% ED 4 Roller feed Water cooling TIG welding possible in the DC range Feed rollers 1.2mm Burner 4meter with 1.0mm wire, ground cable and pressure reducers-- Dimensions in mm approx. 950x850x1020 Operating instructions
used
From insolvency: ESS Pulsarc 350 Year of construction 2008 with feed case DVK 400 with 5meter intermediate package 4 Roller drive Water cooling 2/4 stroke Pulses Welding range 40-350Ampere Duty cycle at 100% 300Ampere at 60% 350Ampere with 4meter torch, ground cable and a roll of Drahr 1.0mm----without pressure reducer
used
From insolvency: Rehm Tiger 182 DC High Year of construction November 2020 220 volts DC Welding range 4-180Ampere Power: 180A at 40% ED--160A at 60%ED--140A at 100A ED J0iqq3 2/4 time RF Ignition Pulses 4meter burner, with ground cable and pressure reducer
used
From operating resolution: Kjellberg TIG 321 AC/DC Year of construction 2013 Pulse function HF Ignition Water cooling Welding Range: 5-320Amp Gyg2uk 320Amps at 45% ED complete, with 4meter torch, ground cable and pressure reducer Dimensions in mm approx. 1100x510x810 --Very neat device-
used
Offered out of insolvency is a DC TIG welding machine EWM Tetrix 301 Activarc with Comfort T3.24 control Year of construction 2009 spotarc/ second pulse 2/4 stroke Water cooling Welding range 5-300Ampere 300Amps at 60% ED 250Amps at 100% ED Bzn9kovxtp 8meter hose package, with ground cable and pressure reducer
used
Description: Lot composed of approximately 50 gaskets for YANMAR silencer - art. 129930-13201 ITEMS NEVER USED STILL IN ORIGINAL PACKAGING Approx. Onsite Dimension. (l x w x h): 300 x 300 x 200 mm, weight approx.: 3 kg
used
Description: Lot composed of approximately 50 gaskets for YANMAR air heater - art. 129100-77510 Approx. Onsite Dimension. (l x w x h): 300 x 300 x 200 mm, weight approx.: 3 kg
used
Resato HBU-B160 Gas High Pressure Workshop Testing System The oil and gas industry is all about the extraction of crude oil and natural gas. One of the challenges is to make the best use of the assets to produce more from the available resources. Various high-pressure applications can contribute to this. Pressure tests guarantee the quality and safety of components for oil and gas production. By injecting a chemical liquid, the well is stimulated. With the controller, high-pressure systems control and regulate back pressure and liquids. In this way, oil and gas can be extracted more safely. Manufacturer: Resato HBU Test System Type: HBU-B160 Max. pressure: 200bar Max. Capacity: 1570cc/ Max. pressure: 7 bar 2 x Gas Bottle Cage 3 x gas cylinder trolley Digital control panel is missing More items - new and used - can be found in our shop! International shipping costs on ...
used
MBraun Glovebox System MB-200-G Stainless steel housing with polycarbonate window MB-200-G Inert Gas Gas Purification System Inert gas atmosphere and gas purification up < 1ppm H2O/O2 Large antechamber with sliding tub Round transfer chamber Closed feedback loop Negative and positive pressure operation MB-RCC 1000 Recirculating Chiller MBraun MB-200-G Gas Purification System The MBRAUN gas purification system, together with a glovebox, is used to enable and maintain a pure inert gas atmosphere in a hermetically sealed enclosure. For standard enclosures Removes O2/H2O
used
Caterpillar G3516E Nat Gas 1600kW Generating Set for Sale. Brand: Caterpillar Model: G3516E Capacity: 1600kW Hours: 28,000h Year: 2011 Fuel: Natural Gas V: 400 HZ: 50 Scope of supply: Engine, Alternator, Control Panel, Frame, Gas Line, Heat Exchanger and other ancillaries. Price: Please Apply
used
MAN Lean Burn Biogas 2876 LE302 Containerised Generator Model: MAN Lean Burn Biogas 2876 LE302 Capacity: 220 kW Hours: 0 Year: 2023 Fuel: Biogas V: 400 HZ: 50 Scope of supply: New MAN 2876 LE302 and ComAp Control Panel. Used Container, Alternator, Radiators and Gas line. MAN Engine comes with manufacturers warranty.
used
Gasket carrier INA DRS 40115 shaft diameter: Ø 78 mm outer diameter Ø 115 mm height seal carrier : 27.5 mm New !height Dimensions ( gasket carrier ): 115 x 115 x 27.5 mm Dimensions ( packaging ): 125 x 125 x 40 mm
used
Description: Including an electronic Euro gas leakage meter LM02 digital from the manufacturer SYSTEM RAU in a case with plenty of accessories as shown in the pictures and various other devices for gas analysis Approx. Onsite Dimension. (l x w x h): 500 x 300 x 450 mm, weight approx.: 30 kg