gas engine deutz used for sale

Shock absorbers, gas springs, shock absorbers -Shaft: Ø 35 mm -Shaft length: 28 mm -Bore: M8 -Number: 8 pieces available -Price: per piece -Dimensions: 75/160 mm -Weight: 3.8 kg/piece

Sample gas cooler -Measuring gas cooler with: protective lining -Connection: 240 volts -Dimensions: 335/560/H390 mm -Weight: 32 kg

Inert gas welding device, inert gas device -Max. Welding power: 340 A. -4 roller drive -Water-cooled -Incl. Ground cable -with removable wire feeder -Hose package length: 4000 mm -Dimensions: 1100/515/H1170 mm -Weight: 214 kg

Shock absorbers, gas pressure springs, shock absorbers, start-up dampers -Tube: Ø 82 mm -Total length: 510 mm -Recording hole: Ø 24 mm -Number: 2 pieces of shock absorbers available -Price: per piece -Dimensions: 82/82/H510 mm -Weight: 11.5 kg/piece

Shock absorbers, gas pressure springs, shock absorbers, start-up dampers, impact absorbers -Shaft: Ø 39 mm -Shaft length: 470 mm -Recording hole: Ø 17 mm -Number: 4 pieces of shock absorbers available -Price: per piece -Dimensions: 1755/140/H100 mm -Weight: 24 kg/piece

MAN Brand, 250kva, year 1998, Very good condition unit. Scope of supply items: Complete engine and alternator on skid with Gas street and PLC type panle, with heat recovery available.

Man Brand, 450kva, year 1998 Very good condition unit. Scope of supply items: Complete engine and alternator on skid with Gas street and PLC type panle, with heat recovery & Water Pump available.

Waukesha h24gld with Stamford Alternator. Year 1996, 500kva, 400volt, 50hz. ( Scope of supply items: Complete engine and alternator on skid with Gas street and PLC type panel with one water pump together...)

500kva Waukesha Brand Gas generator set, Engine model H24GLD, 500kva alternator Stamford , Year 1998, used Gas generator set, ( Scope of supply items: Complete engine and alternator on skid with Gas street and PLC type panel with heat recovery with one heat exchanger with one water pump together...)

Man Brand, Power 250kva, year 1996, Very good condition unit. Scope of supply items: Complete engine and alternator on skid with Gas street and PLC type panle available.

CATERPILLAR Gas Genset, Engine 3516 Power 1000KW / 1250kva. Run Hour around 31k since new, HZ 50, Volt 400, RPM 1500 Year 1999/2000. Very well maintained genset, Immediately available equipment. Scope of supply items: complete engine and alternator on skid with Gas street and PLC Control panel and one heat exchanger together only. ( No any other accessories together with this genset,)

Man Brand, 270kva, year 1999, Very good condition unit. Scope of supply items: Complete engine and alternator on skid with Gas street and PLC type panle, with heat recovery available.

Too condition MAN Gas Generator Set Brand: MAN Model : E2876E312 KVA : 150Kw , 190kva MODEL YEAR : 2007 6 Cylinders 1500 rpm Alternator : STAMFORD (ENGLAND) Volts: 400/415 Hz:50

Brand Waukesha, Engine model H24GLD, Engine power 330kw, alternator Stamford 450kva, year 1996, used Gas generator set,. ( Scope of supply items: Complete engine and alternator on skid with Gas street and PLC type panel with heat recovery with one water pump together...)

Guascor FGLD360 Gas Generator Se, ( it's same Waukesha as 36gld engine) but brand with Guascor assembler. Power 550KW, 675kva. year 1998,, Import from Europe not run local in Pakistan. Scope of supply: Complete Engine with alternator on skid with Gas street and PLC Control panel..

Gas filter KROMSCHRÖDER GRP 20R40-4 81936100 installation length: 92 mm connection internal thread: 3/4 ( inch ) Pmax.: 4 bar T: -15 °C - +80 °C Material ( housing ): Aluminum alloy ( ALSi ) used, tested ! Dimensions: 91 x 88 x 90 mm

Differential gas / air pressure monitor KROMSCHRÖDER DG50UG-3 84447370 setting range: 2,5 - 50 mbar ( 0.0025 - 0.05 bar ) operating pressure: max. 600 mbar ( 0.6 bar ) connection: 1/4 ( inch ) / 1/8 ( inch ) ( female thread ) switching voltage ( AC ): 250 V AC, switching current: 5 ( 1 ) A switching voltage ( DC ): 12 - 24 V DC, switching current: 0.1 ( 0.05 ) A IP54 T: -15 °C - +80 °C used, tested ! dimensions (without cable): 88 x 77 x 70 mm

Gas pressure regulator KROMSCHRÖDER GDJ15R04-0 03155021 installation length: 100 mm connection female thread: 1/2 ( inch ) P: 22 - 40 mbar ( 0.0 022 - 0.04 bar ) Pmax.: 400 mbar ( 0.4 bar ) D: -20 °C - +70 °C Material ( housing ): Aluminum alloy ( ALSi ) used, tested ! Dimensions: 100 x 100 x 123 mm

Gas solenoid valve, solenoid valve, directional control valve, double valve KROMSCHRÖDER 2x VAS110R/NK 8000086 installation length: 155 mm internal connection thread: 3/8 ( inches ) P: 500 mbar ( 0.0.P 5 bar ) T: -20 °C - +60 °C solenoid coil: 24 V DC, 29 Watt IP65 used, checked! dimensions (directional control valve): 225 x 110 x 175 mm

Gas solenoid valve, solenoid valve, directional control valve KROMSCHRÖDER VAS115R/NK 8000087 installation length: 75 mm connection internal thread: 3/8 ( inch ) P: 500 mbar ( 0.P., 5 bar ) T: -20 °C - +60 °C solenoid coil: 24 V DC, 29 Watt IP65 used, checked! Dimensions: 127 x 110 x 175 mm

Jenbacher J212GS Gas generator set, Engine Model J212GS, Engine Power 414kw, Stamford alternator power 600kva, YOM 1997, very good working condition unit. Genset Import from Europe. Not running in locally Pakistan. ( Scope of supply items: Complete engine and alternator on skid with Gas street and PLC type panel with one heat exchanger together...) on skid..

Key data: 47

Complete MAN ELECTRO HAGL generating set for sale. Make and model: MAN ELECTRO HAGL E0834 E312 Year: 2011 Power: 47KW Hours: 32,000h Fuel: Biogas Scope of supply: Complete generating set with engine, alternator, frame, control panel, exchanger, radiator. Price: Please apply

Gasket set, 4 pieces ROEMHELD, HILMA, STARK 132561 for rotary union 9284-036 10 pieces Other quantities on request ! New ! Dimensions (packaging): 180 x 140 x 20 mm

Gasket set, 3 pcs ROEMHELD, HILMA, STARK 131471 for screw-in cylinders 1471-001 10-piece other quantities on request ! New ! Dimensions (packaging): 180 x 140 x 20 mm

Gas pressure regulator KROMSCHRÖDER GBF/VGBF 40 75422020 installation length: 90 mm connection female thread: 1 ( inch ) P: 85 - 105 mbar ( 0.0 085 - 0.105 bar ) Pmax.: 1 bar D: -15 °C - +60 °C Material ( housing ): Aluminum alloy ( ALSi ) used, tested ! Dimensions: 190 x 190 x 282 mm

Waukesha 18GLD Gas Engine with Stamford Alternator. Gas generator set, Year 1998, 325kva, 400volt, 50hz, very good condition unit. Genset Import from Europe. Not use local in Pakistan. Scope of supply items: complete genset with Gas street, And plc type panel.

Scope of delivery possible. Please use Enquire about postcode and city VAT not deductible

Used packaging machine by Multivac type R 245. New 2010. Packaging machine: - produces vacuum and aerated packaging from deep-drawn and sealable bottom soft or thick film, combined with sealable top film. - has two packaging formats : 250g cube with pack size 145x92.25x approx. 40 mm 500÷600g cube with pack size 188.5x145x approx. 40 mm Power supply 400 V / 50 HZ 3/PE AC phases Rated power 15 kW Nominal current 39 A Max. precharge 50 A

Fives Pillard Gas Burner GRC-G3 Burner from 2015. 19.75 MW x 21,000 m3/h. Manufacturer: Fives Pillard Model No.: GRC-G3 Type: Gas Burner Serial Number: 205991C3 / 205991C3 Heat output [MW]: 2.82 – 19.75 Air flow rate [m3/h]: 3,600 – 21,000 Year of construction: 2015 Hours:– Weight [kg]: 610

Inert gas welding machine, arc welding system, MIG/MAG welding system -Manufacturer: Ess, inert gas welding machine MIG-MAG 520-2 MW -Type: 520-2MW -Max. Welding power: 500 A -Water cooled -Wire feed case: ESS DVK 17 -Dimensions: 1160/500/H1220 mm -Weight: 379 kg

Machine for drilling, plasma and gas cutting of metal sheets, metal strips for the manufacture of head and base plates, stiffeners, etc. Features of plasma cutting and drilling systems: Universal tool holder SK40. Model Unit KF 1606 Working range max. W x L mm 1600x6000 Operating range min. W x D mm 220 x 500 Sheet thickness at exit mm 6–60 Max. workpiece weight kg 10000 Vertical drilling unit (Y-axis) pcs 1 Drill diameter mm 8–50 Number of tool changers x number of magazine locations pcs 1 x 6 Effective axle power kW 26 Gas cutting method - Autogen up to 100mm, plasma up to 30mm inclusive Dimensions L x W x H with dust collector mm 15000x5900x4000 Weight kg 10500 - Machine control with modern software package for steel structures LANTEK

The AJAN SHP 260 A plasma cutter was built in 2010 in Turkey. The machine is in continuous operation. I am selling due to upgrading to a newer model. Characteristics of the AJAN SHP 260 A plasma cutter - cut materials: structural steel, stainless steel, aluminum - maximum cutting speed: 15 m/min - maximum sheet size (length x width): 6 x 2 m - minimum cutting thickness (structural steel): 0.5 mm - maximum cutting thickness (structural steel): 60 mm - minimum cutting thickness (stainless steel): 0.8 mm - maximum cutting thickness (stainless steel): 20 mm - minimum cutting thickness (aluminum): 1.2 mm - maximum cutting thickness (aluminum): 25 mm - total power requirement: 52 kW - power of the plasma source: 260 A Equipment of the SHP260l plasma burner - CAD/CAM software: AJANCAD, Lantek Pulsar - machine plasma source: AJAN PP 260 A - autopsy and extraction table with ...

Cutting machine Track width (B): 2,100 / 2,600 / 3,100 mm 2,100 / 2,600 / 3,100 / 3,600 / 3,850 / 4,100 mm Machine width (A): Track width (B) + 715 mm Working width with 1-3 torches: Track width (B) - 600 mm Machine length (C): Working length (D) + 2,000 mm Max. number of torch carriers: 4 Cutting thickness (with standard torch): up to 200 mm Drives: AC-servo drives / planetary gears Input voltage: 3 x 400 V / 50 Hz

Satronik LS 4-head oxy-cutting pantograph Plant decommissioned from the component production line for the earthmoving sector. Cutting with oxy-fuel technology on the water surface to avoid material deformations. Water type bench with scraper. Bench dimensions [mm] 3.700 x 7.700 Machine performance Useful cutting dimensions [mm] 3.000 x 12.000 Thicknesses with 1 torch [mm] 300 mm Thicknesses with 4 torches [mm] 100 mm Breakthrough [mm] 200 Cut starting from outside or pre-hole [mm] 300 Specifications from product sheet Width x Working length (A): 2.000 x 6.000 mm - approx Width x Total length (B): 3.700 x 7.700 mm - approx Total height (C): 2,100 mm Stroke height: 550 mm Feed speed: 20.000 mm / min Cutting table height: 650 mm Max no. Of torches / torches: 6

Cebora Plasma Prof 164HQC Three-phase power supply 380/400 V- 50 / 60Hz Maximum installed power 17KW Power consumption 22KVA-100% Active life 120A @ 100% Electronic continuous adjustment Max drilling thickness 25mm Max cutting thickness 35mm Weight 170 kg Dimensions 460 x 750 x 850mm It can also cut with oxy. Watter cooling noozle. Cutting table dimension : 2000x3000 but can also be extended to 2000x9000 if needed. The machine is working flawless.

Unicut XC 3000 Gas Cutting Machine CNC Produced February .2004. Power supply 3x380 V- 50Hz Gas supply – propane butane 0,5 bar -oxygen 10 bar Cutting length 12500 mm Cutting width 3000 mm Max. speed 6 m/min

Group of processed metal - sheet Sheet thickness - 10-130 mm Sheet width - 400-3100 mm Sheet length - 2500-12000 mm Minimum part length - 200 mm Minimum part width - 150 mm Drilling direction - vertical Number of drilling heads - 2 pcs. Maximum drilling diameter in steel - 40 mm Maximum drilling thickness - 130 mm Maximum speed of longitudinal / transverse movement - 30m / min Tool magazine - 6 pieces Marking unit - 38 positions Hypertherm plasma cutting unit - up to 32mm clean cut low alloy steel

Inert gas welding machine, arc welding system, MIG/MAG welding system -Manufacturer: Migatronic, inert gas welding machine MIG-MAG type MIG 445 MK III -Max. Welding power: 405 A -Water cooled -Wire feed case: MWF 11 4-roller drive -Accessories: including hose package, ground cable, gas fitting -Dimensions: 1100/470/H1370 mm -Weight: 172 kg

Make: Caterpillar Mfg year: 2017 Condition: Unused Serial no: 1507821 Fuel: Natural gas Rated Power: 1198 kW Rated Frequency: 50 Hz Rated Voltage: 10,500 Weight: 13,700 kg Contact us at infoheeyas.co.uk #gas #caterpillar #new #generator #power #energy #electricl #naturalgas #fuel

Inert gas welding machine, arc welding system, MIG/MAG welding system -Manufacturer: Ess, inert gas welding machine MIG-MAG type 310 MW -Max. Welding power: 310 A -Water cooled -Wire feeder: ESS PS 12-8 -Accessories: including hose package, ground cable -Dimensions: 1020/480/H910 mm -Weight: 208 kg

2 x MTU 20V4000L63 complete power plant for sale 2 x 20V4000L63 generating sets total Each genset is 220 Kw at 1500 RPM total about 4.4 Mw with Stamford alternators system is 50 Hz and 2800 Kva Running hours are 20.000 and 30.000. respectively Gen sets year of manufacture is 2010

Key data: 265

Biogas Schnell module with Scania Engine availble for immediate delivery. Engine is in good condition and full maintenance contract carried out by Schnell . Make: Scania Schnell Model: 6R20.1B Power: 265kW Hour: 28,200h Year: 2018 Fuel: Biogas Scope of supply: Engine, alternator (Stamford), frame, control panel, radiators, exhaust system, active carbon filter, gas cooler, pipes, large set of gas and diesel filters. Price: €60,000

CATERPILLAR Gas Genset, Engine G3516A Power 1000KW / 1250kva. Run Hour around 42k since new, HZ 50, Volt 400, RPM 1500 Year 1998

Caterpillar 3516B Gas Generator set only Engine + alternator on Skid available for sale.

Key data: 110

MAN E0836 LE302 Biogas Containerised Generating set. The engine is from 2019. The container is from 2009. It has been carefully maintained and stopped running in October 2023. Service History December 2021: New pistons and cylinder heads June 2023: New turbo Brand: MAN Model: E0836 LE302 Hours: 32,000 Capacity: 110 kW Years: 2019 Fuel: Biogas Voltage: 400V Frequency: 50Hz Scope of supply: Full container with engine, alternator (Leroy Somer), frame, control panel, Motortech ignition system, 2 radiators, plate heat exchanger, exhaust gas heat exchanger, gas line, carbon filter.

Man 50kva gas generator set in Canopy available in stock.

Key data: 1000 , 690

The plant was undergoing maintenance, and the owner didn't find it advantageous to keep the system active. That's why the engine is disassembled. It is sold as it is with maintenance to be completed. Brand: MTU Model: 8V 4000 L65 1MW Hours: 30,000 Capacity: 1000 kW Years: 2013 Fuel: Natural Gas Voltage: 690V Frequency: 50Hz Scope of supply: Complete Generating set with engine, alternator, frame, control panel,1 radiator, steam boiler, gas line, pipes and ancillaries. Available also with a top-end overhaul using original spare parts at an additional cost of 100,000€. Price: 150,000€

Pressure regulator manual adjustable, ultrapure gas regulator DRÄGER TESCOM type: 44-3262H283-001 inlet pressure: max. 35 bar outlet pressure: 0 - 7 bar stainless steel ! as good as new ! Dimensions: 140 x 140 x 100 mm

Used gas compressor Mehrer TRE 700 from a Malmberg pressurized water wash. Approx. 110,000 operating hours. Functionally expanded. With valves and pulley.

Key data: 305

Complete Containerised Jenbacher 208 landfill generator. Make: Jenbacher Model: 208 GS CO2 Power: 305 kW Hours: 15,000 Year: 2003 HZ: 50 V: 400 Fuel: Landfill Scope of supply: Container, engine, alternator, control panel, gas line, oil tank, radiator, piping plus other ancillaries. Price: Please Apply