gas engine deutz used for sale

Recon Part Number: RMG 985B-200/100 Attention: We also have various other RECON parts from different manufacturers / types available. We will be happy to send you our current stock list. ---------------------------------------------------------------------- ----------- Sold only to commercial customers! ---------------------------------------------------------------------- ------------ If you have any further questions, please do not hesitate to contact us!

Recon Part Number: 1227 8128 Attention: We also have various other RECON parts from different manufacturers / types available. We will be happy to send you our current stock list. ---------------------------------------------------------------------- ----------- Sold only to commercial customers! ---------------------------------------------------------------------- ------------ If you have any further questions, please do not hesitate to contact us!

Key data: 727 , 400

MWM TCG2016 V16C Biogas Generator Set. Make and model: MWM TCG2016 V16C Capacity: 727 kW Fuel: Biogas Year: 2008 / new engine block 2019 Hours: 10,000 HZ: 50 V: 400 Scope of supply: Engine, Alternator (Marelli - 2017), Cooling Unit (Hitema), Control Panel (TEM EVO), Gas Line, Transformer, Container, Radiator. In 2019, New Engine, Turbo, Intercooler, Electrical equipment (sensors etc), were installed. Alternator is from 2017. Price: Please Apply

Machine type: MIG/MAG welding system Make Oerlikon Type Minicito 304 Connection voltage 3 x 400 Volt Adjustment range 35 – 300 amps Duty cycle 35% ED at 300 amps 60% ED at 230 amps 100% ED at 180 amps Current setting: 14 switching levels Cooling transformer by built-in fan Cooling burner gas-cooled Design of mobile compact system Wire feeder toothed 4-roller gearbox Fuse protection 16 amps Dimensions L x W x H 950 x 400 x 820 mm Weight 80 kg Age approx. 15 years Condition workshop-tested, good, incl. UVV test report Scope of delivery welding system with the following accessories: 1 piece welding torch 3 mtr. long 1 piece of ground cable 1 piece pressure reducer 1 roll of welding wire D-300 coil, 5 kg 1 can of non-stick spray 1 piece of hand shield 1 piece of protective glass 10 DIN 1 piece of glass attachment white 1 spare  ...

LORCH HR 918 REMOTE CONTROL LORCH HR 918 remote control As new. For details see Lorch With conversion kit to CAN bus (if this is not already on your machine) Price: €500 ex VAT

Jenbacher JGS416 GS-N.L Complete Containerised Plant with Steam Boiler Hours: 30,604 Year: 2011 Capacity: 1,189 KW Fuel: Natural Gas Voltage: 400 Volts HZ: 50 Top end service was done at 27,000 hours by Jenbacher. Inspection Notes: Engine seen running – good condition. Scope of supply: complete Containerised Plant with Steam Boiler comprising of Engine, Alternator, Base Frame, Control Panel (Dia.Ne XT3), Gas Line, Radiator, Synchronisation panel, etc. Price €250,000

Key data: 588 V, 400

2 x Jenbacher 320 Wood gas / Syngas. We have for sale a complete generating station for syngas, including gas line, circuit breaker, control panel and radiator. Two low-hour wood gas / syngas generators in great condition. They are currently set for wood gas / syngas. All wiring between control panel and alternator has been marked up. Available for immediate delivery. For use on gas from pyrolysis plants, gasification plants, woodgas and synthesis gas. Capacity: these generator sets are rated at 588kW for syngas. If they are run on other gases they could produce 720kW. Make and Model: Jenbacher 320 Fuel: Wood gas / Syngas Year: 2008 Hours: 5,000 Capacity: 588 / 720 kW V: 400 HZ: 50 Scope of supply: Engine,Alternator, Frame, Control panel, Switch panels, Dual gas lines, Radiators and other accessories. Price: Please Apply Various Original Jenbacher conta ...

Key data: 170

Schnell CHP plant Bio with Scania Engine Brand: Scania Model: DC9 Dual Fuel Power: 170kw Hours: Engine 40000h, Alternator 20000h, whole plant 99000h Year: Engine 2018, Alternator 2020, whole plant 2010 Fuel: Biogas Scope of supply: Complete CHP NOT containerised with Engine, Baseframe, Alternator, Comap Control System, Gas Exhaust Heat Exchanger, Radiator, Gas line, Electrical Control Cabinet, Oil filtration block, Activated Carbon Filter, Gas Booster. Maintenance information: The engine block requires liner change (2 out of 5 are less than 6 months old, the other 3 are 5 years old). Price: 50,000€

Offer 22437 Specifications: - Welding current max. 450 A / 36 V 60% ED - 350 A / 32 V 100% ED - Welding current adjustable in 2x 18 switch levels 60 - 450 A - 2 bar + 4 bar – regulation, points, interval - 2 roll wire feeders, infinitely adjustable in separate - Wire feeder case CLOSS , CK 68 C - Intermediate package machine – wire feed approx. 6 m - Hose package water-cooled approx. 4 m - Ground cable -Reducer - Connection 400 V / 19 KVA - Space requirement approx. W 490 x H 1200 x D 1100 mm - Weight approx. 180 kg

We are also happy to send you videos of how it works. Shipping possible by arrangement for an extra charge. If you have any questions, just get in touch. PLEASE NOTE: This offer is non-binding and subject to availability. The indicated price is per piece, net, plus 19% VAT. free loading from DE-83395 Freilassing.

Machine type: MIG/MAG welding system Make MERKLE Type OptiMIG 351 DW Plant no.: 129.187 Connection voltage 3 x 400 Volt Adjustment range 25 - 350 amps Duty cycle 60% ED at 350 amps 100% ED at 300 amps Current Adjustment 28 Switching Levels Cooling transformer by built-in fan Cooling burner water-cooled Design of mobile industrial plant with separate DV case Wire Feed Gearbox 4-Roller Gearbox DV 26 Fuse protection 32 amps Dimensions L x W x H 990 x 510 x 1,135 mm Weight 210 kg Optional Accessories Volt and Ampere Digital Display Automatic wiring Age 24 months Condition workshop-tested, like new, incl. UVV workshop test report Scope of delivery welding system with the following accessories: 1 piece welding torch 3 mtr. long 1 piece of ground cable 4 mtr. long, 70 sq mm 1 piece of pressure reducer argon with 2 pressure gauges 1  ...

Machine type: MIG/MAG welding system Make MERKLE Type OptiMIG 351 DW Plant no.: 123.585 Connection voltage 3 x 400 Volt Adjustment range 25 - 350 amps Duty cycle 60% ED at 350 amps 100% ED at 300 amps Current Adjustment 28 Switching Levels Cooling transformer by built-in fan Cooling burner water-cooled Design of mobile industrial plant with separate DV case Wire Feed Gearbox 4-Roller Gearbox DV 26 Fuse protection 32 amps Dimensions L x W x H 990 x 510 x 1,135 mm Weight 210 kg Optional Accessories Volt and Ampere Digital Display Automatic wiring Age 4 years Condition workshop-tested, very good, incl. UVV workshop test report Scope of delivery welding system with the following accessories: 1 piece welding torch 3 mtr. long 1 piece of ground cable 4 mtr. long, 70 sq mm 1 piece of pressure reducer argon with 2 pressure gauges 1 p ...

Gasket set, exterior, 7 pieces ROEMHELD, HILMA, STARK 131531 for screw-in cylinders 1471-001 5 -piece other quantities on request ! New ! Dimensions (packaging): 180 x 140 x 20 mm

14 GUARCOR GENSETS SF480T ALG

Machine Type: Pulse-Arc Inverter Welding Machine Make MERKLE Type HighPULSE touch 450 DW Plant no.: 125.127 Connection voltage 3 x 400 Volt Adjustment range 20 – 450 amps Duty cycle 60% ED at 450 amps 100% ED at 360 amps Infinitely variable current adjustment Cooling inverter by built-in fan Cooling burner water-cooled Design of mobile industrial plant with separate DV case and 1.6 mtr. long VB cable Wire feeder 4-roller drive DV 31, speedometer motor Fuse protection 32 amps Dimensions L x W x H 1,210 x 430 x 1,100 mm Weight 123 kg Age 3 years Condition workshop-tested, like new, incl. UVV test report Scope of delivery welding system with the following accessories: 1 piece welding torch SBT 504 W, 3 mtr. long 1 piece of ground cable 1 piece pressure reducer with 2 pressure gauges 1 roll of welding wire 0.8 mm, D-300, 5 ...

Inert gas welding device, inert gas device -Max. Welding power: 350 A. -2 roller drive -Air cooled -Incl. Ground cable -with removable wire feeder -Gas valve -Hose package: 2.8 m -Dimensions: 1100/640/H1090 mm -Weight: 190 kg

Inert gas welding device, inert gas device, welding rectifier -without wire feed -Max. Welding power: 350 A -Dimensions: 700/600/H1400 mm -Weight: 62 kg

Remote control for inert gas welding device, inert gas device, welding rectifier, hand controller -Remote control -Manufacturer: unknown -Type: Poti -Number: 1x controls available -Price: per piece -Dimensions: 155/105/H130 mm -Weight: 2.7 kg

Inert gas welding device, inert gas device -Max. Welding power: 320 A. -2 roller drive -Air cooled -Incl. Ground cable -with removable wire feeder -Gas valve -Hose package -Dimensions: 1000/500/H970 mm -Weight: 170 kg

Window rubber, cutting machine, gasket cutter -Stops: 2 -Dimensions: 2500/600/H1000 mm -Weight: 15 kg

Heating, burner, gas burner -Gas type: natural gas liquid -Gas connection: 20 mbar to 1000 mbar -Nominal heat output: 3590 kW -Blower motor: 5.5 kW -Weight: 160 kg

Inert gas welding machine -Max. Welding power: 400 A. -Four roll feed -Water-cooled -Hose package -with removable wire feeder -Incl. Ground cable -Gas valve

Inert gas welding device, arc welding system, MIG/MAG welding system -Scope of delivery: without wire feed unit with hose package, according to the pictures -Manufacturer: Ess, inert gas welding machine MIG-MAG 520 MW without wire feed -Type: 520-2MW -Max. Welding power: 500 A -Water-cooled -Dimensions: 1160/500/H810 mm -Weight: 303 kg

Shock absorber, gas spring, shock absorber, start-up absorber, impact absorber -Manufacturer: GSL (German Standard Lift), gas spring gas pressure spring 2 pieces -Type: 250N 11/14287251554/00101 -Piston: Ø 28 mm -Piston rod: Ø 14 mm, length 750 mm -Socket: M10 x 1.5 -Price/delivery: complete -Dimensions: Ø 28 x 1585 mm -Weight: 2.1 kg/pcs

Spiral wound gasket, labyrinth body gasket, flange gasket -Spiral seal: Flange seal according to DIN EN 12560-2 5 pieces/package -Type: 2 1/2 150lbs 1.4404/PTFE -Dimension: Ø124 x 2mm -Price: complete -Total weight: 0.7 kg

Spiral wound gasket, labyrinth body gasket, flange gasket -Spiral seal: Flange seal according to DIN EN 1514-2 -Type: DN65 PN40 1.4404/PTFE -Number: 4x seal available -Price per piece -Dimension: Ø127 x 4 mm -Weight: 0.1 kg/pc.

Spiral wound gasket, labyrinth body gasket, flange gasket, high pressure gasket -Manufacturer: Frenzelit, flat gasket Novatec Premium -External: O 126 mm -Inside: O 77 mm -Thickness: 2mm -Number: 51x seal available -Price per piece -Minimum purchase: 15 pieces -Weight: 0.03 kg/pc.

Spiral wound gasket, labyrinth body gasket, flange gasket, high pressure gasket -Manufacturer: Frenzelit, flat gasket Novatec Premium -External: O 162 mm -Inside: O 116 mm -Thickness: 2mm -Number: 107x seal available -Price per piece -Minimum purchase: 10 pieces -Weight: 0.05 kg/pc.

Solenoid valve, butterfly valve, flap valve, solenoid valve, solenoid valve, solenoid gas valve, gas solenoid valve, double gas valve, gas valve -Manufacturer: Siemens, double gas valve -Type: VGD40.040 -Connection: DN40 -Pmax .: 1000 mbar -Dimension: 235/170 / H195 mm -Weight: 6.9 kg

Solenoid valve, butterfly valve, flap valve, solenoid valve, solenoid valve, solenoid gas valve, gas solenoid valve, double gas valve, gas valve -Manufacturer: Siemens, double gas valve -Type: VGD40.065 -Connection: DN65 -Pmax .: 700 mbar -Dimensions: 285/190 / H210 mm -Weight: 8.3 kg

Line regulating valve, shut-off valve, pressure relief valve, shut-off valve, safety shut-off valve, safety relief valve, pressure monitor, pressure switch, pressure regulator, gas pressure regulator, gas pressure regulator -Manufacturer: Kromschroeder, gas pressure regulator unused in original packaging -Type: VGBF 15R40-1 -PN: 4 bar -Dimension: Ø132 x 175 mm -Weight: 1.1kg

Remote control for inert gas welding device, inert gas device, welding rectifier, hand controller -Manufacturer: Fronius, remote control RCU5000i Univ.SD -Art.No.: 4,046,098 -Voltage: U1 24 V -Dimensions: 180/260/H50 mm -Weight: 1.5 kg

Solenoid valve, butterfly valve, flap valve, solenoid valve, solenoid valve, solenoid gas valve, gas solenoid valve -Manufacturer: Siemens, gas solenoid valve unused OVP -Type: VGS10.104E2 -Voltage: 230 V 50 Hz -Connection: 3/8 -Pmax.: 1000 mbar -Number: 20x valve available -Price: per piece -Dimension box: 110/70/H40 mm -Weight: 0.6 kg/piece

Gas bottle cart, gas bottle cart, steel bottle cart -Transport trolley: for 2 gas bottles -Accessories: including tool box with torch accessories -Dimensions: 700/540/H1355 mm -Weight: 38 kg

Shock absorbers, gas springs, shock absorbers, start-up dampers, industrial shock absorbers -Manufacturer: ACE Controls, industrial shock absorbers -Type: A 11/8 x 4 -Tube: Ø 76 mm -Shaft: Ø 19 mm -Price: per piece -Number: 4 piece -Dimensions: 345/140/H90 mm -Weight: 6.9 kg/piece

Inert gas welding machine, arc welding system, MIG/MAG welding system -Max. Welding power: 320 A. -4 roller drive -Water-cooled -Incl. Ground cable -with: removable wire feeder -Gas valve -Hose package -Also suitable for: robots -Number: 2x devices available -Price: per piece -Dimensions: 1155/500/H1030 mm -Weight: 263 kg

Shock absorbers, gas pressure springs, shock absorbers, start-up dampers, impact absorbers -Piston: Ø 40 mm -Piston housing length: 377 mm -Piston rod: Ø 20 mm -Recording hole: Ø 14 mm -Dimensions: Ø 40 x 530 mm -Weight: 1.5 kg/piece

Shock absorbers, gas pressure springs, shock absorbers, start-up dampers, impact absorbers -Piston: Ø 40 mm -Piston housing length: 377 mm -Piston rod: Ø 20 mm -Recording hole: Ø 14 mm -Price: per piece -Number: 3 pieces -Dimensions: Ø 40 x 530 mm -Weight: 1.5 kg/piece

Air bellows, roller bellows, air cushions, spring-loaded brake -Gas bottle holder -for: 33.5/43.5 Lbs -Hole spacing: 115/75 mm -Weight: 3.2 kg

High-frequency ignition device, heater, gas and oil burners -Type: Dungs Gas-Multibloc rule and safety combination MBC-300-VEF -Voltage: 230 V -Frequency: 50-60 Hz -Power: 120/16 W -Price: per piece -Number: 13 pieces -Dimensions: 235/135/H115 mm -Weight: 4 kg

Gas bottle cart, gas bottle cart, steel bottle cart -Transport trolley -External dimensions: 1080/750/H1210 mm -Net weight: 23.5 kg

Inert gas welding machine with pulse function, pulse arc welding system, MIG / MAG pulse welding system -with: 3 hose packages -Max. Welding power: 330 A -Remote control connection -4 roller drive -Water-cooled -with: removable wire feeder -Incl. Ground cable -Gas valve -Dimensions: 655/900/H1490 mm -Weight: 160 kg

Inert gas welding device, inert gas device, welding rectifier -Max. Welding power: 330 A -Remote control connection -4 roller drive -Water-cooled -with: removable wire feeder -Incl. Ground cable -Gas valve -Dimensions: 550/900/H1170 mm -Weight: 116 kg

Inert gas welding machine, inert gas welding machine, arc welding system, MIG/MAG welding system -Max. Welding power: 400 A -with pulse function -4-roller drive -Water-cooled -Incl. Ground cable -with: detachable wire feeder -Gas fitting - Hose package 4 m -Number: 1x device available -Dimensions: 500/1010/H1600 mm -Weight: 162 kg

Gas bottle cart, gas bottle cart, steel bottle cart -Transport trolley -Number: 1 piece car available -Price: per piece -External dimensions: 1000/750/H1200 mm -Own weight: 36 kg

Gas and air filters, air filters -Manufacturer: Maxitrol -Type: GF65 MF-DN65 -Dimensions: 245/199/H190 mm -Weight: 4.5 kg

Gas bottle cart, gas bottle cart, steel bottle cart -Transport trolley -Tires: PU tires puncture-proof 260x85mm -Number: 1 piece car available -Price: per piece -External dimensions: 730/500/H1150 mm -Own weight: 17.5 kg

Gas bottle cart, gas bottle cart, steel bottle cart -Transport trolley: galvanized version -Tires: solid rubber -Number: 1 piece car available -Price: per piece -External dimensions: 730/520/H1325 mm -Own weight: 26 kg

Gas bottle cart, gas bottle cart, steel bottle cart -Transport trolley: galvanized version -Tires: air -Number: 1 piece car available -Price: per piece -External dimensions: 760/520/H1320 mm -Own weight: 19 kg

Shock absorbers, gas springs, shock absorbers -Shaft: Ø 50 mm -Shaft length: 28 mm -Bore: M8 -Number: 5 pieces available -Price: per piece -Dimensions: 95/170 mm -Weight: 6.6 kg/piece